[PATCH 1/2] rockchip: ringneck-px30: get closer to other Theobroma defconfigs

Kever Yang kever.yang at rock-chips.com
Fri Jun 14 11:30:02 CEST 2024


On 2024/6/12 22:40, Quentin Schulz wrote:
> From: Quentin Schulz <quentin.schulz at cherry.de>
>
> RK3588 Jaguar and Tiger, and RK3399 Puma use standard boot with the full
> feature set, so let's do that as well for PX30 Ringneck.
>
> Disable support for unused OSes as Linux is the primary target.
>
> Enable a bunch of commands:
>   - boot/bootd
>   - erofs
>   - gpio
>   - iminfo
>   - imxtract
>   - itest
>   - pmic
>   - regulator
>   - sleep
>   - squashfs
>
> that could be useful and are also found in Jaguar and Tiger defconfigs.
>
> Signed-off-by: Quentin Schulz <quentin.schulz at cherry.de>
Reviewed-by: Kever Yang <kever.yang at rock-chips.com>

Thanks,
- Kever
> ---
>   configs/ringneck-px30_defconfig | 16 +++++++++++-----
>   1 file changed, 11 insertions(+), 5 deletions(-)
>
> diff --git a/configs/ringneck-px30_defconfig b/configs/ringneck-px30_defconfig
> index dedf35d4347..a0c1fec0951 100644
> --- a/configs/ringneck-px30_defconfig
> +++ b/configs/ringneck-px30_defconfig
> @@ -20,6 +20,7 @@ CONFIG_DEBUG_UART=y
>   CONFIG_FIT=y
>   CONFIG_FIT_VERBOSE=y
>   CONFIG_SPL_LOAD_FIT=y
> +CONFIG_BOOTSTD_FULL=y
>   CONFIG_DEFAULT_FDT_FILE="rockchip/px30-ringneck-haikou.dtb"
>   # CONFIG_DISPLAY_CPUINFO is not set
>   CONFIG_DISPLAY_BOARDINFO_LATE=y
> @@ -34,12 +35,15 @@ CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x200
>   CONFIG_SPL_ATF=y
>   # CONFIG_TPL_FRAMEWORK is not set
>   # CONFIG_TPL_SYS_MALLOC_SIMPLE is not set
> -# CONFIG_CMD_BOOTD is not set
> +# CONFIG_BOOTM_NETBSD is not set
> +# CONFIG_BOOTM_PLAN9 is not set
> +# CONFIG_BOOTM_RTEMS is not set
> +# CONFIG_CMD_VBE is not set
> +# CONFIG_BOOTM_VXWORKS is not set
>   # CONFIG_CMD_ELF is not set
> -# CONFIG_CMD_IMI is not set
> -# CONFIG_CMD_XIMG is not set
>   # CONFIG_CMD_LZMADEC is not set
>   # CONFIG_CMD_UNZIP is not set
> +CONFIG_CMD_GPIO=y
>   CONFIG_CMD_GPT=y
>   CONFIG_CMD_I2C=y
>   # CONFIG_CMD_LOADB is not set
> @@ -47,9 +51,11 @@ CONFIG_CMD_I2C=y
>   CONFIG_CMD_MMC=y
>   CONFIG_CMD_USB=y
>   CONFIG_CMD_USB_MASS_STORAGE=y
> -# CONFIG_CMD_ITEST is not set
>   # CONFIG_CMD_SETEXPR is not set
> -# CONFIG_CMD_SLEEP is not set
> +CONFIG_CMD_PMIC=y
> +CONFIG_CMD_REGULATOR=y
> +CONFIG_CMD_EROFS=y
> +CONFIG_CMD_SQUASHFS=y
>   # CONFIG_SPL_DOS_PARTITION is not set
>   # CONFIG_ISO_PARTITION is not set
>   CONFIG_EFI_PARTITION_ENTRIES_NUMBERS=64
>


More information about the U-Boot mailing list