[PATCH] ARM: stm32: Fix livetree conversion on STM32MP15xx DHSOM

[Patrice CHOTARD]

On 6/6/24 15:02, Marek Vasut wrote:
> Unlike fdt_node_check_compatible() which returns 0 if node is compatible,
> ofnode_device_is_compatible() return true which is non-zero if node is
> compatible. The intention of the code is to exit from the function in
> case the node is not compatible with "micrel,ks8851-mll". Add the missing
> invert into the conditional to reinstate original behavior.
> 
> This exposes a follow up problem caused by conversion to DM based FMC2 EBI
> driver, where the FMC2 EBI is not configured when accessed by this code.
> Probe the KS8851 MAC, which also configures the FMC2 EBI as a dependency,
> so that the KS8851 MAC CCR register can be accessed over the FMC2 EBI bus
> and checked for EEPROM present bit.
> 
> Fixes: 5a605b7c8615 ("board: dhelectronics: stm32mp1: convert to livetree")
> Signed-off-by: Marek Vasut <marex at denx.de>
> ---
> Cc: Patrice Chotard <patrice.chotard at foss.st.com>
> Cc: Patrick Delaunay <patrick.delaunay at foss.st.com>
> Cc: Simon Glass <sjg at chromium.org>
> Cc: Tom Rini <trini at konsulko.com>
> Cc: u-boot at dh-electronics.com
> Cc: u-boot at lists.denx.de
> Cc: uboot-stm32 at st-md-mailman.stormreply.com
> ---
>  board/dhelectronics/dh_stm32mp1/board.c | 15 +++++++++++++--
>  1 file changed, 13 insertions(+), 2 deletions(-)
> 
> diff --git a/board/dhelectronics/dh_stm32mp1/board.c b/board/dhelectronics/dh_stm32mp1/board.c
> index ebd45f9053f..4f4f537fee5 100644
> --- a/board/dhelectronics/dh_stm32mp1/board.c
> +++ b/board/dhelectronics/dh_stm32mp1/board.c
> @@ -76,14 +76,25 @@
>  
>  static bool dh_stm32_mac_is_in_ks8851(void)
>  {
> -	ofnode node;
> +	struct udevice *udev;
>  	u32 reg, cider, ccr;
> +	char path[256];
> +	ofnode node;
> +	int ret;
>  
>  	node = ofnode_path("ethernet1");
>  	if (!ofnode_valid(node))
>  		return false;
>  
> -	if (ofnode_device_is_compatible(node, "micrel,ks8851-mll"))
> +	ret = ofnode_get_path(node, path, sizeof(path));
> +	if (ret)
> +		return false;
> +
> +	ret = uclass_get_device_by_of_path(UCLASS_ETH, path, &udev);
> +	if (ret)
> +		return false;
> +
> +	if (!ofnode_device_is_compatible(node, "micrel,ks8851-mll"))
>  		return false;
>  
>  	/*

Applied to u-boot-stm32/master