[PATCH] arm: dts: k3-am625-beagleplay: Package TIFS Stub
Neha Malcom Francis
n-francis at ti.com
Fri Jun 14 14:00:31 CEST 2024
Hi Dhruva
On 12/06/24 11:53, Dhruva Gole wrote:
> Add support for packaging the TIFS Stub as it's required for basic Low
> Power Modes like Deep Sleep.
>
> Signed-off-by: Dhruva Gole <d-gole at ti.com>
> ---
> arch/arm/dts/k3-am625-beagleplay-u-boot.dtsi | 33 +++++++++++++++++++-
> 1 file changed, 32 insertions(+), 1 deletion(-)
>
> diff --git a/arch/arm/dts/k3-am625-beagleplay-u-boot.dtsi b/arch/arm/dts/k3-am625-beagleplay-u-boot.dtsi
> index fb2032068d1c..5e2248a4a668 100644
> --- a/arch/arm/dts/k3-am625-beagleplay-u-boot.dtsi
> +++ b/arch/arm/dts/k3-am625-beagleplay-u-boot.dtsi
> @@ -69,6 +69,23 @@
> };
> };
>
> + tifsstub-gp {
> + filename = "tifsstub.bin_gp";
> + ti-secure-rom {
> + content = <&tifsstub_gp>;
> + core = "secure";
> + load = <0x60000>;
> + sw-rev = <CONFIG_K3_X509_SWRV>;
> + keyfile = "ti-degenerate-key.pem";
> + tifsstub;
> + };
> + tifsstub_gp: tifsstub-gp.bin {
> + filename = "ti-sysfw/ti-fs-stub-firmware-am62x-gp.bin";
> + type = "blob-ext";
> + optional;
> + };
> + };
> +
> ti-spl_unsigned {
> filename = "tispl.bin_unsigned";
> pad-byte = <0xff>;
> @@ -105,6 +122,19 @@
> };
> };
>
> + tifsstub-gp {
> + description = "tifsstub";
> + type = "firmware";
> + arch = "arm32";
> + compression = "none";
> + os = "tifsstub-gp";
> + load = <0x9dc00000>;
> + entry = <0x9dc00000>;
> + blob-ext {
> + filename = "tifsstub.bin_gp";
> + };
> + };
> +
> dm {
> description = "DM binary";
> type = "firmware";
> @@ -148,7 +178,8 @@
> conf-0 {
> description = "k3-am625-beagleplay";
> firmware = "atf";
> - loadables = "tee", "dm", "spl";
> + loadables = "tee", "dm", "spl",
> + "tifsstub-gp";
> fdt = "fdt-0";
> };
> };
Acked-by: Neha Malcom Francis <n-francis at ti.com>
--
Thanking You
Neha Malcom Francis
More information about the U-Boot
mailing list