v2024.07-rc4 issues on VisionFive v2
Heinrich Schuchardt
xypron.glpk at gmx.de
Fri Jun 14 17:36:16 CEST 2024
On 14.06.24 13:14, Conor Dooley wrote:
> Hey,
>
> After going from Vendor SPL/OpenSBI/U-Boot to OpenSBI v1.4++ plus
> v2024.07-rc4 SPL/U-Boot I ran into a boot loop problem relating to
> PCI:
> U-Boot 2024.07-rc4 (Jun 13 2024 - 15:09:34 +0100)
>
> CPU: sifive,u74-mc
> Model: StarFive VisionFive 2 v1.2A
> DRAM: 4 GiB
> Core: 136 devices, 26 uclasses, devicetree: board
> WDT: Not starting watchdog at 13070000
> MMC: mmc at 16010000: 0, mmc at 16020000: 1
> Loading Environment from SPIFlash... SF: Detected gd25lq128 with page size 256 Bytes, erase size 4 KiB, total 16 MiB
> OK
> StarFive EEPROM format v2
>
> --------EEPROM INFO--------
> Vendor : StarFive Technology Co., Ltd.
> Product full SN: VF7110A1-2249-D004E000-00000540
> data version: 0x2
> PCB revision: 0xa1
> BOM revision: A
> Ethernet MAC0 address: 6c:cf:39:00:17:95
> Ethernet MAC1 address: 6c:cf:39:00:17:96
> --------EEPROM INFO--------
>
> starfive_7110_pcie pcie at 2b000000: Starfive PCIe bus probed.
> starfive_7110_pcie pcie at 2c000000: Starfive PCIe bus probed.
> In: serial at 10000000
> Out: serial at 10000000
> Err: serial at 10000000
> Net: eth0: ethernet at 16030000, eth1: ethernet at 16040000
> starting USB...
> Bus xhci_pci: Register 5000420 NbrPorts 5
> Starting the controller
> USB XHCI 1.00
> scanning bus xhci_pci for devices...
> U-Boot SPL 2024.07-rc4 (Jun 13 2024 - 15:09:34 +0100)
> DDR version: dc2e84f0.
> Trying to boot from SPI
>
> This only appeared after I refreshed the environment by running.
> `env default -a -f; env save`. Before that things worked "fine", I
> suppose because nothing actually touched PCI. I've just disabled
> PCI for now and things are working once more. I've not attempted
> to bisect/debug this, cos that's not the fastest process while
> running U-Boot out of flash.
You could boot from SD-card to read the SPI flash and checksum it.
>
> In case it is relevant, the board I have is one of the "super early
> bird" ones.
>
> Cheers,
> Conor.
I am not able to reproduce this on my v1.2A board. (1.2B according to
silk screen).
starting USB...
Bus xhci_pci: Register 5000420 NbrPorts 5
Starting the controller
USB XHCI 1.00
scanning bus xhci_pci for devices... 2 USB Device(s) found
scanning usb for storage devices... 0 Storage Device(s) found
StarFive # usb tree
USB device tree:
1 Hub (5 Gb/s, 0mA)
| U-Boot XHCI Host Controller
|
+-2 Hub (480 Mb/s, 100mA)
USB2.0 Hub
StarFive # pci
BusDevFun VendorId DeviceId Device Class Sub-Class
_____________________________________________________________
00.00.00 0x1556 0x1111 Bridge device 0x04
01.00.00 0x1106 0x3483 Serial bus controller 0x03
02.00.00 0x1556 0x1111 Bridge device 0x04
03.00.00 0x15b7 0x5009 Mass storage controller 0x08
I tested both with and without NVMe drive while booting from SD-card.
Best regards
Heinrich
More information about the U-Boot
mailing list