[PATCH 1/2] phy: Extend generic_setup_phy() with PHY mode and submode
Marek Vasut
marek.vasut+renesas at mailbox.org
Sun Jun 16 17:04:17 CEST 2024
Extend generic_setup_phy() parameter list with PHY mode and submode and
call generic_phy_set_mode() in generic_setup_phy(), so the generic PHY
setup function can configure the PHY into correct mode before powering
the PHY up.
Update all call sites of generic_setup_phy() as well, all of which are
USB host related, except for DM test which now behaves as a USB host
test.
Note that if the PHY driver does not implement the .set_mode callback,
generic_phy_set_mode() call returns 0 and does not error out, so this
should not break any existing systems.
Signed-off-by: Marek Vasut <marek.vasut+renesas at mailbox.org>
---
Cc: Caleb Connolly <caleb.connolly at linaro.org>
Cc: Fabio Estevam <festevam at gmail.com>
Cc: Fabrice Gasnier <fabrice.gasnier at foss.st.com>
Cc: Jonas Karlman <jonas at kwiboo.se>
Cc: Mathieu Othacehe <othacehe at gnu.org>
Cc: Mattijs Korpershoek <mkorpershoek at baylibre.com>
Cc: Neil Armstrong <neil.armstrong at linaro.org>
Cc: Nishanth Menon <nm at ti.com>
Cc: Nobuhiro Iwamatsu <iwamatsu at nigauri.org>
Cc: Sean Anderson <seanga2 at gmail.com>
Cc: Simon Glass <sjg at chromium.org>
Cc: Sumit Garg <sumit.garg at linaro.org>
Cc: Tim Harvey <tharvey at gateworks.com>
Cc: Tom Rini <trini at konsulko.com>
Cc: Xavier Drudis Ferran <xdrudis at tinet.cat>
Cc: u-boot-qcom at groups.io
Cc: u-boot at lists.denx.de
---
drivers/phy/phy-uclass.c | 7 ++++++-
drivers/usb/host/ehci-generic.c | 2 +-
drivers/usb/host/ehci-msm.c | 2 +-
drivers/usb/host/ehci-mx6.c | 2 +-
drivers/usb/host/ehci-pci.c | 2 +-
drivers/usb/host/ohci-generic.c | 2 +-
include/generic-phy.h | 5 ++++-
test/dm/phy.c | 8 ++++----
8 files changed, 19 insertions(+), 11 deletions(-)
diff --git a/drivers/phy/phy-uclass.c b/drivers/phy/phy-uclass.c
index acdcda15b5b..bbaf95112c5 100644
--- a/drivers/phy/phy-uclass.c
+++ b/drivers/phy/phy-uclass.c
@@ -508,7 +508,8 @@ int generic_phy_power_off_bulk(struct phy_bulk *bulk)
return ret;
}
-int generic_setup_phy(struct udevice *dev, struct phy *phy, int index)
+int generic_setup_phy(struct udevice *dev, struct phy *phy, int index,
+ enum phy_mode mode, int submode)
{
int ret;
@@ -520,6 +521,10 @@ int generic_setup_phy(struct udevice *dev, struct phy *phy, int index)
if (ret)
return ret;
+ ret = generic_phy_set_mode(phy, mode, submode);
+ if (ret)
+ generic_phy_exit(phy);
+
ret = generic_phy_power_on(phy);
if (ret)
generic_phy_exit(phy);
diff --git a/drivers/usb/host/ehci-generic.c b/drivers/usb/host/ehci-generic.c
index 23c3ed25554..1ae3619ce25 100644
--- a/drivers/usb/host/ehci-generic.c
+++ b/drivers/usb/host/ehci-generic.c
@@ -94,7 +94,7 @@ static int ehci_usb_probe(struct udevice *dev)
if (err)
goto reset_err;
- err = generic_setup_phy(dev, &priv->phy, 0);
+ err = generic_setup_phy(dev, &priv->phy, 0, PHY_MODE_USB_HOST, 0);
if (err)
goto regulator_err;
diff --git a/drivers/usb/host/ehci-msm.c b/drivers/usb/host/ehci-msm.c
index a081f71b187..b0c060b8173 100644
--- a/drivers/usb/host/ehci-msm.c
+++ b/drivers/usb/host/ehci-msm.c
@@ -56,7 +56,7 @@ static int ehci_usb_probe(struct udevice *dev)
hcor = (struct ehci_hcor *)((phys_addr_t)hccr +
HC_LENGTH(ehci_readl(&(hccr)->cr_capbase)));
- ret = generic_setup_phy(dev, &p->phy, 0);
+ ret = generic_setup_phy(dev, &p->phy, 0, PHY_MODE_USB_HOST, 0);
if (ret)
return ret;
diff --git a/drivers/usb/host/ehci-mx6.c b/drivers/usb/host/ehci-mx6.c
index 31cd8a50f4a..a93fa5d5455 100644
--- a/drivers/usb/host/ehci-mx6.c
+++ b/drivers/usb/host/ehci-mx6.c
@@ -703,7 +703,7 @@ static int ehci_usb_probe(struct udevice *dev)
usb_phy_enable(ehci, priv->phy_addr);
#endif
#else
- ret = generic_setup_phy(dev, &priv->phy, 0);
+ ret = generic_setup_phy(dev, &priv->phy, 0, PHY_MODE_USB_HOST, 0);
if (ret)
goto err_regulator;
#endif
diff --git a/drivers/usb/host/ehci-pci.c b/drivers/usb/host/ehci-pci.c
index 572686580cd..8d05b14e898 100644
--- a/drivers/usb/host/ehci-pci.c
+++ b/drivers/usb/host/ehci-pci.c
@@ -30,7 +30,7 @@ static int ehci_pci_init(struct udevice *dev, struct ehci_hccr **ret_hccr,
int ret;
u32 cmd;
- ret = generic_setup_phy(dev, &priv->phy, 0);
+ ret = generic_setup_phy(dev, &priv->phy, 0, PHY_MODE_USB_HOST, 0);
if (ret)
return ret;
diff --git a/drivers/usb/host/ohci-generic.c b/drivers/usb/host/ohci-generic.c
index f1325cd4953..cc44226f5e0 100644
--- a/drivers/usb/host/ohci-generic.c
+++ b/drivers/usb/host/ohci-generic.c
@@ -50,7 +50,7 @@ static int ohci_usb_probe(struct udevice *dev)
goto reset_err;
}
- err = generic_setup_phy(dev, &priv->phy, 0);
+ err = generic_setup_phy(dev, &priv->phy, 0, PHY_MODE_USB_HOST, 0);
if (err)
goto reset_err;
diff --git a/include/generic-phy.h b/include/generic-phy.h
index eaab7491660..47962023236 100644
--- a/include/generic-phy.h
+++ b/include/generic-phy.h
@@ -415,10 +415,13 @@ int generic_phy_power_off_bulk(struct phy_bulk *bulk);
* @dev: The consumer device.
* @phy: A pointer to the PHY port
* @index: The index in the list of available PHYs
+ * @mode: PHY mode
+ * @submode: PHY submode
*
* Return: 0 if OK, or negative error code.
*/
-int generic_setup_phy(struct udevice *dev, struct phy *phy, int index);
+int generic_setup_phy(struct udevice *dev, struct phy *phy, int index,
+ enum phy_mode mode, int submode);
/**
* generic_shutdown_phy() - Power off and de-initialize phy.
diff --git a/test/dm/phy.c b/test/dm/phy.c
index d14117f6f7a..a90881b12ab 100644
--- a/test/dm/phy.c
+++ b/test/dm/phy.c
@@ -243,20 +243,20 @@ static int dm_test_phy_setup(struct unit_test_state *uts)
"gen_phy_user", &parent));
/* normal */
- ut_assertok(generic_setup_phy(parent, &phy, 0));
+ ut_assertok(generic_setup_phy(parent, &phy, 0, PHY_MODE_USB_HOST, 0));
ut_assertok(generic_shutdown_phy(&phy));
/* power_off fail with -EIO */
- ut_assertok(generic_setup_phy(parent, &phy, 1));
+ ut_assertok(generic_setup_phy(parent, &phy, 1, PHY_MODE_USB_HOST, 0));
ut_asserteq(-EIO, generic_shutdown_phy(&phy));
/* power_on fail with -EIO */
- ut_asserteq(-EIO, generic_setup_phy(parent, &phy, 2));
+ ut_asserteq(-EIO, generic_setup_phy(parent, &phy, 2, PHY_MODE_USB_HOST, 0));
ut_assertok(generic_shutdown_phy(&phy));
/* generic_phy_get_by_index fail with -ENOENT */
ut_asserteq(-ENOENT, generic_phy_get_by_index(parent, 3, &phy));
- ut_assertok(generic_setup_phy(parent, &phy, 3));
+ ut_assertok(generic_setup_phy(parent, &phy, 3, PHY_MODE_USB_HOST, 0));
ut_assertok(generic_shutdown_phy(&phy));
return 0;
--
2.43.0
More information about the U-Boot
mailing list