[PATCH u-boot-marvell 04/16] ddr: marvell: a38x: debug: Define DDR_VIEWER_TOOL variables only if needed, and make them static

[Marek Behún]

The variables is_validate_window_per_if, is_validate_window_per_pup,
sweep_cnt and is_run_leveling_sweep_tests are only used if
DDR_VIEWER_TOOL macro is defined, so define them only in that case.

Make them static since they are only used in ddr3_debug.c.

Signed-off-by: Marek Behún <kabel at kernel.org>
---
 drivers/ddr/marvell/a38x/ddr3_debug.c | 9 +++++----
 1 file changed, 5 insertions(+), 4 deletions(-)

diff --git a/drivers/ddr/marvell/a38x/ddr3_debug.c b/drivers/ddr/marvell/a38x/ddr3_debug.c
index c659ae92d8..d32d42c408 100644
--- a/drivers/ddr/marvell/a38x/ddr3_debug.c
+++ b/drivers/ddr/marvell/a38x/ddr3_debug.c
@@ -114,13 +114,14 @@ u32 ctrl_adll[MAX_CS_NUM * MAX_INTERFACE_NUM * MAX_BUS_NUM];
 u32 ctrl_adll1[MAX_CS_NUM * MAX_INTERFACE_NUM * MAX_BUS_NUM];
 u32 ctrl_level_phase[MAX_CS_NUM * MAX_INTERFACE_NUM * MAX_BUS_NUM];
 #endif /* EXCLUDE_SWITCH_DEBUG */
+
+static u8 is_validate_window_per_if = 0;
+static u8 is_validate_window_per_pup = 0;
+static u8 sweep_cnt = 1;
+static u8 is_run_leveling_sweep_tests;
 #endif /* DDR_VIEWER_TOOL */
 
 struct hws_tip_config_func_db config_func_info[MAX_DEVICE_NUM];
-u8 is_validate_window_per_if = 0;
-u8 is_validate_window_per_pup = 0;
-u8 sweep_cnt = 1;
-u8 is_run_leveling_sweep_tests;
 
 static struct hws_xsb_info xsb_info[MAX_DEVICE_NUM];
 
-- 
2.44.2