[PATCH 2/4] arm64: Add versal2 mini qspi support

Venkatesh Yadav Abbarapu venkatesh.abbarapu at amd.com
Wed Jun 19 09:17:31 CEST 2024


Add versal2 mini qspi configuration.

Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu at amd.com>
---
 configs/amd_versal2_mini_qspi_defconfig | 79 +++++++++++++++++++++++++
 1 file changed, 79 insertions(+)
 create mode 100644 configs/amd_versal2_mini_qspi_defconfig

diff --git a/configs/amd_versal2_mini_qspi_defconfig b/configs/amd_versal2_mini_qspi_defconfig
new file mode 100644
index 0000000000..3360c1546a
--- /dev/null
+++ b/configs/amd_versal2_mini_qspi_defconfig
@@ -0,0 +1,79 @@
+CONFIG_ARM=y
+CONFIG_SYS_CONFIG_NAME="amd_versal2_mini"
+# CONFIG_ARM64_CRC32 is not set
+CONFIG_COUNTER_FREQUENCY=100000000
+# CONFIG_ARM64_SUPPORT_AARCH32 is not set
+CONFIG_ARCH_VERSAL2=y
+CONFIG_TEXT_BASE=0xBBF00000
+CONFIG_SYS_MALLOC_LEN=0x20000
+CONFIG_SYS_MALLOC_F_LEN=0x4000
+CONFIG_NR_DRAM_BANKS=3
+CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
+CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0xBBF20000
+CONFIG_ENV_SIZE=0x80
+CONFIG_DEFAULT_DEVICE_TREE="amd-versal2-mini"
+CONFIG_DEBUG_UART_BASE=0xf1920000
+CONFIG_DEBUG_UART_CLOCK=100000000
+CONFIG_SYS_MEM_RSVD_FOR_MMU=y
+# CONFIG_PSCI_RESET is not set
+CONFIG_SYS_LOAD_ADDR=0xBBF80000
+CONFIG_DEBUG_UART=y
+# CONFIG_EXPERT is not set
+CONFIG_REMAKE_ELF=y
+# CONFIG_LEGACY_IMAGE_FORMAT is not set
+# CONFIG_AUTOBOOT is not set
+# CONFIG_ARCH_FIXUP_FDT_MEMORY is not set
+CONFIG_SYS_CONSOLE_INFO_QUIET=y
+# CONFIG_DISPLAY_CPUINFO is not set
+CONFIG_BOARD_EARLY_INIT_R=y
+# CONFIG_BOARD_LATE_INIT is not set
+# CONFIG_CMDLINE_EDITING is not set
+# CONFIG_AUTO_COMPLETE is not set
+# CONFIG_SYS_LONGHELP is not set
+CONFIG_SYS_PROMPT="versal2> "
+# CONFIG_CMD_CONSOLE is not set
+# CONFIG_CMD_BOOTD is not set
+# CONFIG_CMD_BOOTI is not set
+# CONFIG_CMD_ELF is not set
+# CONFIG_CMD_FDT is not set
+# CONFIG_CMD_GO is not set
+# CONFIG_CMD_RUN is not set
+# CONFIG_CMD_IMI is not set
+# CONFIG_CMD_XIMG is not set
+# CONFIG_CMD_EXPORTENV is not set
+# CONFIG_CMD_IMPORTENV is not set
+# CONFIG_CMD_EDITENV is not set
+# CONFIG_CMD_SAVEENV is not set
+# CONFIG_CMD_ENV_EXISTS is not set
+# CONFIG_CMD_CRC32 is not set
+# CONFIG_CMD_LOADB is not set
+# CONFIG_CMD_LOADS is not set
+# CONFIG_CMD_ECHO is not set
+# CONFIG_CMD_ITEST is not set
+# CONFIG_CMD_SOURCE is not set
+# CONFIG_CMD_SETEXPR is not set
+CONFIG_CMD_CACHE=y
+# CONFIG_CMD_SLEEP is not set
+CONFIG_OF_EMBED=y
+CONFIG_SYS_RELOC_GD_ENV_ADDR=y
+# CONFIG_NET is not set
+# CONFIG_DM_DEVICE_REMOVE is not set
+# CONFIG_GPIO is not set
+# CONFIG_I2C is not set
+# CONFIG_INPUT is not set
+# CONFIG_MMC is not set
+CONFIG_MTD=y
+CONFIG_DM_SPI_FLASH=y
+# CONFIG_SPI_FLASH_LOCK is not set
+CONFIG_SPI_FLASH_STMICRO=y
+# CONFIG_SPI_FLASH_USE_4K_SECTORS is not set
+# CONFIG_POWER is not set
+CONFIG_DEBUG_UART_PL011=y
+CONFIG_DEBUG_UART_ANNOUNCE=y
+CONFIG_DEBUG_UART_SKIP_INIT=y
+CONFIG_ARM_DCC=y
+CONFIG_PL01X_SERIAL=y
+CONFIG_SPI=y
+CONFIG_DM_SPI=y
+CONFIG_ZYNQMP_GQSPI=y
+# CONFIG_GZIP is not set
-- 
2.17.1



More information about the U-Boot mailing list