[PATCH 4/4] arm64: config: Add versal2 mini emmc defconfig
Venkatesh Yadav Abbarapu
venkatesh.abbarapu at amd.com
Wed Jun 19 09:17:33 CEST 2024
Add versal2 mini emmc configuration.
Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu at amd.com>
---
configs/amd_versal2_mini_emmc_defconfig | 69 +++++++++++++++++++++++++
1 file changed, 69 insertions(+)
create mode 100644 configs/amd_versal2_mini_emmc_defconfig
diff --git a/configs/amd_versal2_mini_emmc_defconfig b/configs/amd_versal2_mini_emmc_defconfig
new file mode 100644
index 0000000000..7ad44386a6
--- /dev/null
+++ b/configs/amd_versal2_mini_emmc_defconfig
@@ -0,0 +1,69 @@
+CONFIG_ARM=y
+CONFIG_SYS_CONFIG_NAME="amd_versal2_mini"
+CONFIG_COUNTER_FREQUENCY=100000000
+CONFIG_ARCH_VERSAL2=y
+CONFIG_TEXT_BASE=0x10000
+CONFIG_SYS_MALLOC_LEN=0x80000
+CONFIG_NR_DRAM_BANKS=1
+CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
+CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x10000
+CONFIG_ENV_SIZE=0x80
+CONFIG_DEFAULT_DEVICE_TREE="amd-versal2-mini"
+CONFIG_DEBUG_UART_BASE=0xf1920000
+CONFIG_DEBUG_UART_CLOCK=100000000
+# CONFIG_PSCI_RESET is not set
+CONFIG_SYS_LOAD_ADDR=0x8000000
+CONFIG_DEBUG_UART=y
+# CONFIG_EXPERT is not set
+CONFIG_REMAKE_ELF=y
+# CONFIG_AUTOBOOT is not set
+CONFIG_SYS_CONSOLE_INFO_QUIET=y
+# CONFIG_DISPLAY_CPUINFO is not set
+CONFIG_BOARD_EARLY_INIT_R=y
+# CONFIG_BOARD_LATE_INIT is not set
+# CONFIG_CMDLINE_EDITING is not set
+# CONFIG_AUTO_COMPLETE is not set
+# CONFIG_SYS_LONGHELP is not set
+CONFIG_SYS_PROMPT="versal2> "
+# CONFIG_CMD_BDI is not set
+# CONFIG_CMD_CONSOLE is not set
+# CONFIG_CMD_BOOTD is not set
+# CONFIG_CMD_BOOTM is not set
+# CONFIG_CMD_BOOTI is not set
+# CONFIG_CMD_ELF is not set
+# CONFIG_CMD_FDT is not set
+# CONFIG_CMD_GO is not set
+# CONFIG_CMD_RUN is not set
+# CONFIG_CMD_IMI is not set
+# CONFIG_CMD_XIMG is not set
+# CONFIG_CMD_EXPORTENV is not set
+# CONFIG_CMD_IMPORTENV is not set
+# CONFIG_CMD_EDITENV is not set
+# CONFIG_CMD_SAVEENV is not set
+# CONFIG_CMD_ENV_EXISTS is not set
+# CONFIG_CMD_CRC32 is not set
+# CONFIG_CMD_LOADB is not set
+# CONFIG_CMD_LOADS is not set
+CONFIG_CMD_MMC=y
+# CONFIG_CMD_ECHO is not set
+# CONFIG_CMD_ITEST is not set
+# CONFIG_CMD_SOURCE is not set
+# CONFIG_CMD_SETEXPR is not set
+CONFIG_CMD_FAT=y
+CONFIG_CMD_FS_GENERIC=y
+CONFIG_OF_EMBED=y
+CONFIG_SYS_RELOC_GD_ENV_ADDR=y
+# CONFIG_NET is not set
+# CONFIG_DM_DEVICE_REMOVE is not set
+CONFIG_MMC_HS200_SUPPORT=y
+CONFIG_MMC_SDHCI=y
+CONFIG_MMC_SDHCI_ZYNQ=y
+CONFIG_DEBUG_UART_PL011=y
+CONFIG_DEBUG_UART_ANNOUNCE=y
+CONFIG_DEBUG_UART_SKIP_INIT=y
+CONFIG_ARM_DCC=y
+CONFIG_PL01X_SERIAL=y
+CONFIG_FAT_WRITE=y
+# CONFIG_GZIP is not set
+# CONFIG_EFI_LOADER is not set
+# CONFIG_LMB is not set
--
2.17.1
More information about the U-Boot
mailing list