[PATCH 1/6] arm: mach-k3: Add default ATF location for AM62/AM62a

[Dhruva Gole]

Hi,

On Feb 14, 2024 at 10:30:04 -0600, Andrew Davis wrote:
> There is a default ATF load address that is used for devices that have
> ATF running in SRAM. For AM62 and AM62a, ATF runs from DRAM. Instead
> of having to override the address in every defconfig, make add a
> default for these ATF in DRAM devices.
> 
> Signed-off-by: Andrew Davis <afd at ti.com>
> ---
>  arch/arm/mach-k3/Kconfig               | 5 +++--
>  configs/am62ax_evm_a53_defconfig       | 1 -
>  configs/am62x_beagleplay_a53_defconfig | 1 -
>  configs/am62x_evm_a53_defconfig        | 1 -
>  configs/phycore_am62x_a53_defconfig    | 1 -
>  configs/verdin-am62_a53_defconfig      | 1 -
>  6 files changed, 3 insertions(+), 7 deletions(-)
> 

Beagleplay stops booting completely with latest U-boot so I did a little
bisect and it seems like reverting this patch helps.

I am not sure what other implications there are of reverting this so I
don't suggest immediately dropping it, however some hints around what's
missing on beagleplay vs other platforms would be helpful.

Because other platforms based off the same SoC don't seem to be
affected.

-- 
Best regards,
Dhruva Gole <d-gole at ti.com>