[PATCH] board: gateworks: venice: add print for GPY111 PHY name

Tim Harvey tharvey at gateworks.com
Wed Jun 19 23:13:39 CEST 2024


Due to supply chain issues Venice boards use either a DP83867 or a
GPY111 RGMII PHY. We already print an identifier for the DP83867 so add
one for the GPY111 to better identify what PHY is on a board:

Example:
 Net:   GPY111 eth0: ethernet at 30be0000 [PRIME]
 Net:   DP83867 eth0: ethernet at 30be0000 [PRIME]

Signed-off-by: Tim Harvey <tharvey at gateworks.com>
---
 board/gateworks/venice/venice.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/board/gateworks/venice/venice.c b/board/gateworks/venice/venice.c
index 5b105d7659e4..3080ff20cb02 100644
--- a/board/gateworks/venice/venice.c
+++ b/board/gateworks/venice/venice.c
@@ -75,6 +75,9 @@ int board_phy_config(struct phy_device *phydev)
 		val |= 0xb << 8; /* LED2(Green;Link/Act): blink for TX/RX act */
 		phy_write(phydev, MDIO_DEVAD_NONE, 24, val);
 		break;
+	case 0xd565a401: /* MaxLinear GPY111 */
+		puts("GPY111 ");
+		break;
 	}
 
 	if (phydev->drv->config)
-- 
2.25.1



More information about the U-Boot mailing list