[PATCH v5] cmd: bootm: add ELF file support

Максим Москалец maximmosk4 at gmail.com
Fri Jun 21 16:16:13 CEST 2024


пт, 21 июн. 2024 г. в 15:51, Heinrich Schuchardt <xypron.glpk at gmx.de>:

> On 21.06.24 13:42, Maxim Moskalets wrote:
> > Some operating systems (e.g. seL4) and embedded applications are ELF
> > images. It is convenient to use FIT-images to implement trusted boot.
> > Added "elf" image type for booting using bootm command.
> >
> > Signed-off-by: Maxim Moskalets <maximmosk4 at gmail.com>
>
> I guess a test could be added to test/py/tests/test_zynqmp_rpu.py which
> already uses the bootelf command?
>
> Is it necessary to use specific hardware to run this test?

Best regards

Maxim

> Best regards
>
> Heinrich
>
> > ---
> > v5:
> >       used func from lib/elf.c to avoid dependency form CLI
> > ---
> >   boot/bootm_os.c  | 18 ++++++++++++++++++
> >   boot/image-fit.c |  3 ++-
> >   boot/image.c     |  5 ++++-
> >   cmd/Kconfig      |  7 +++++++
> >   include/image.h  |  1 +
> >   5 files changed, 32 insertions(+), 2 deletions(-)
> >
> > diff --git a/boot/bootm_os.c b/boot/bootm_os.c
> > index 15297ddb53..6a6621706f 100644
> > --- a/boot/bootm_os.c
> > +++ b/boot/bootm_os.c
> > @@ -8,6 +8,7 @@
> >   #include <bootstage.h>
> >   #include <cpu_func.h>
> >   #include <efi_loader.h>
> > +#include <elf.h>
> >   #include <env.h>
> >   #include <fdt_support.h>
> >   #include <image.h>
> > @@ -394,6 +395,20 @@ static int do_bootm_qnxelf(int flag, struct
> bootm_info *bmi)
> >   }
> >   #endif
> >
> > +#if defined(CONFIG_BOOTM_ELF)
> > +static int do_bootm_elf(int flag, struct bootm_info *bmi)
> > +{
> > +     Bootelf_flags flags = { .autostart = 1 };
> > +
> > +     if (flag != BOOTM_STATE_OS_GO)
> > +             return 0;
> > +
> > +     bootelf(bmi->images->ep, flags, 0, NULL);
> > +
> > +     return 1;
> > +}
> > +#endif
> > +
> >   #ifdef CONFIG_INTEGRITY
> >   static int do_bootm_integrity(int flag, struct bootm_info *bmi)
> >   {
> > @@ -535,6 +550,9 @@ static boot_os_fn *boot_os[] = {
> >   #ifdef CONFIG_BOOTM_EFI
> >       [IH_OS_EFI] = do_bootm_efi,
> >   #endif
> > +#if defined(CONFIG_BOOTM_ELF)
> > +     [IH_OS_ELF] = do_bootm_elf,
> > +#endif
> >   };
> >
> >   /* Allow for arch specific config before we boot */
> > diff --git a/boot/image-fit.c b/boot/image-fit.c
> > index f6464bcf62..9253f81fff 100644
> > --- a/boot/image-fit.c
> > +++ b/boot/image-fit.c
> > @@ -2175,7 +2175,8 @@ int fit_image_load(struct bootm_headers *images,
> ulong addr,
> >               fit_image_check_os(fit, noffset, IH_OS_TEE) ||
> >               fit_image_check_os(fit, noffset, IH_OS_OPENRTOS) ||
> >               fit_image_check_os(fit, noffset, IH_OS_EFI) ||
> > -             fit_image_check_os(fit, noffset, IH_OS_VXWORKS);
> > +             fit_image_check_os(fit, noffset, IH_OS_VXWORKS) ||
> > +             fit_image_check_os(fit, noffset, IH_OS_ELF);
> >
> >       /*
> >        * If either of the checks fail, we should report an error, but
> > diff --git a/boot/image.c b/boot/image.c
> > index fc774d605d..abac254e02 100644
> > --- a/boot/image.c
> > +++ b/boot/image.c
> > @@ -130,7 +130,10 @@ static const table_entry_t uimage_os[] = {
> >       {       IH_OS_OPENRTOS, "openrtos",     "OpenRTOS",             },
> >   #endif
> >       {       IH_OS_OPENSBI,  "opensbi",      "RISC-V OpenSBI",       },
> > -     {       IH_OS_EFI,      "efi",          "EFI Firmware" },
> > +     {       IH_OS_EFI,      "efi",          "EFI Firmware"          },
> > +#ifdef CONFIG_BOOTM_ELF
> > +     {       IH_OS_ELF,      "elf",          "ELF Image"             },
> > +#endif
> >
> >       {       -1,             "",             "",                     },
> >   };
> > diff --git a/cmd/Kconfig b/cmd/Kconfig
> > index a2dee34689..613baa106e 100644
> > --- a/cmd/Kconfig
> > +++ b/cmd/Kconfig
> > @@ -321,6 +321,13 @@ config BOOTM_EFI
> >       help
> >         Support booting UEFI FIT images via the bootm command.
> >
> > +config BOOTM_ELF
> > +     bool "Support booting ELF images"
> > +     depends on CMD_BOOTM && LIB_ELF
> > +     default n
> > +     help
> > +       Support booting ELF images via the bootm command.
> > +
> >   config CMD_BOOTZ
> >       bool "bootz"
> >       help
> > diff --git a/include/image.h b/include/image.h
> > index c5b288f62b..9daaee15cd 100644
> > --- a/include/image.h
> > +++ b/include/image.h
> > @@ -100,6 +100,7 @@ enum {
> >       IH_OS_TEE,                      /* Trusted Execution Environment */
> >       IH_OS_OPENSBI,                  /* RISC-V OpenSBI */
> >       IH_OS_EFI,                      /* EFI Firmware (e.g. GRUB2) */
> > +     IH_OS_ELF,                      /* ELF Image (e.g. seL4) */
> >
> >       IH_OS_COUNT,
> >   };
>
>


More information about the U-Boot mailing list