[PATCH 2/3] rockchip: fix wrong PCI range address in rk3568 dtsi

[ETIENNE DUBLE]

One of the PCI ranges was wrong in this device tree.
When testing with a FriendlyElec Nanopi R5C board, the
2nd ethernet interface (labelled "wan") was not working
in u-boot because of that.

With the correct value (found in FriendlyElec's downstream
u-boot repository), this 2nd ethernet interface now works.

Signed-off-by: Etienne Dublé <etienne.duble at imag.fr>
---

 dts/upstream/src/arm64/rockchip/rk3568.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/dts/upstream/src/arm64/rockchip/rk3568.dtsi b/dts/upstream/src/arm64/rockchip/rk3568.dtsi
index f1be76a54c..06aac034ca 100644
--- a/dts/upstream/src/arm64/rockchip/rk3568.dtsi
+++ b/dts/upstream/src/arm64/rockchip/rk3568.dtsi
@@ -150,7 +150,7 @@
 		      <0x0 0xf0000000 0x0 0x00100000>;
 		ranges = <0x01000000 0x0 0xf0100000 0x0 0xf0100000 0x0 0x00100000>,
 			 <0x02000000 0x0 0xf0200000 0x0 0xf0200000 0x0 0x01e00000>,
-			 <0x03000000 0x0 0x40000000 0x3 0x80000000 0x0 0x40000000>;
+			 <0x03000000 0x0 0x80000000 0x3 0x80000000 0x0 0x40000000>;
 		reg-names = "dbi", "apb", "config";
 		resets = <&cru SRST_PCIE30X2_POWERUP>;
 		reset-names = "pipe";
-- 
2.34.1