[PATCH v1] board: mpfs_icicle: implement board_fdt_blob_setup()

Tom Rini trini at konsulko.com
Tue Jun 25 16:34:21 CEST 2024


On Tue, Jun 25, 2024 at 10:08:06AM +0100, Conor Dooley wrote:

> The firmware on the Icicle is capable of providing a devicetree in a1 to
> U-Boot, but until now the devicetree has been packaged in a "payload" [1]
> alongside U-Boot (or other bootloaders/RTOSes) and appended to the image.
> The address of this appended devicetree is placed in a1 by the firmware.
> This meant that the mechanism used by OF_SEPARATE to locate the
> devicetree at the end of the image would pick up the one provided by the
> firmware when u-boot-nodtb.bin was in the payload and U-Boot's devicetree
> when u-boot.bin was.
> 
> The firmware is now going to be capable of providing a minimal devicetree
> (quite cut down due to severe space constraints), but this devicetree is
> linked into the firmware that runs out of the L2 rather than at the end
> of the U-Boot image. Implement board_fdt_blob_setup() so that this
> devicetree can be optionally used, and the devicetree provided in the
> "payload" can be used without relying on "happening" to implement the
> same strategy as OF_SEPARATE expects in combination with
> u-boot-nodtb.bin. Unlike other RISC-V boards, the firmware provided
> devicetree is only used when OF_BOARD is set, so that the almost
> certainly more complete devicetree in U-Boot will be used unless
> explicitly requested otherwise.
> 
> Link: https://github.com/polarfire-soc/hart-software-services/blob/master/tools/hss-payload-generator/README.md [1]
> Signed-off-by: Conor Dooley <conor.dooley at microchip.com>
> ---
> CC: Ivan Griffin <ivan.griffin at microchip.com>
> CC: Padmarao Begari <padmarao.begari at microchip.com>
> CC: Cyril Jean <cyril.jean at microchip.com>
> CC: Tom Rini <trini at konsulko.com>
> CC: Conor Dooley <conor.dooley at microchip.com>
> CC: u-boot at lists.denx.de
> ---
>  board/microchip/mpfs_icicle/mpfs_icicle.c | 19 +++++++++++++++++++
>  1 file changed, 19 insertions(+)
> 
> diff --git a/board/microchip/mpfs_icicle/mpfs_icicle.c b/board/microchip/mpfs_icicle/mpfs_icicle.c
> index 4d7d843dfa3..2c1f7175f0e 100644
> --- a/board/microchip/mpfs_icicle/mpfs_icicle.c
> +++ b/board/microchip/mpfs_icicle/mpfs_icicle.c
> @@ -9,6 +9,7 @@
>  #include <init.h>
>  #include <asm/global_data.h>
>  #include <asm/io.h>
> +#include <asm/sections.h>
>  
>  DECLARE_GLOBAL_DATA_PTR;
>  
> @@ -50,6 +51,24 @@ static void read_device_serial_number(u8 *response, u8 response_size)
>  		response_buf[idx] = readb(MPFS_SYS_SERVICE_MAILBOX + idx);
>  }
>  
> +void *board_fdt_blob_setup(int *err)
> +{
> +	*err = 0;
> +	/*
> +	 * The devicetree provided by the previous stage is very minimal due to
> +	 * severe space constraints. The firmware performs no fixups etc.
> +	 * U-Boot, if providing a devicetree, almost certainly has a better
> +	 * more complete one than the firmware so that provided by the firmware
> +	 * is ignored for OF_SEPARATE.
> +	 */
> +	if (IS_ENABLED(CONFIG_OF_BOARD)) {
> +		if (gd->arch.firmware_fdt_addr)
> +			return (ulong *)(uintptr_t)gd->arch.firmware_fdt_addr;
> +	}
> +
> +	return (ulong *)_end;
> +}
> +
>  int board_init(void)
>  {
>  	/* For now nothing to do here. */

I'm adding in Simon and Ilias as this touches on one of those frequent
topics about how device trees can/should be passed along to us.

-- 
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 659 bytes
Desc: not available
URL: <https://lists.denx.de/pipermail/u-boot/attachments/20240625/7d876495/attachment.sig>


More information about the U-Boot mailing list