[PATCH v6 7/8] rockchip: Ensure memory size is available in RK3399 SPL

[Simon Glass]

At present gd->ram_size is 0 in SPL, meaning that it is not possible to
enable the cache. Correct this by always populating the RAM size
correctly.

This increases code size by about 500 bytes in SPL, since it must call
the rather large rockchip_sdram_size() function.

Signed-off-by: Simon Glass <sjg at chromium.org>
Reviewed-by: Quentin Schulz <quentin.schulz at cherry.de>
---

(no changes since v3)

Changes in v3:
- Cut the patch down to bare bones

Changes in v2:
- Add new patch to correct memory size in SPL

 drivers/ram/rockchip/sdram_rk3399.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/ram/rockchip/sdram_rk3399.c b/drivers/ram/rockchip/sdram_rk3399.c
index ef9a1824b2b..bc79c034808 100644
--- a/drivers/ram/rockchip/sdram_rk3399.c
+++ b/drivers/ram/rockchip/sdram_rk3399.c
@@ -3142,19 +3142,19 @@ static int rk3399_dmc_init(struct udevice *dev)
 
 static int rk3399_dmc_probe(struct udevice *dev)
 {
+	struct dram_info *priv = dev_get_priv(dev);
+
 #if defined(CONFIG_TPL_BUILD) || \
 	(!defined(CONFIG_TPL) && defined(CONFIG_SPL_BUILD))
 	if (rk3399_dmc_init(dev))
 		return 0;
-#else
-	struct dram_info *priv = dev_get_priv(dev);
-
+#endif
 	priv->pmugrf = syscon_get_first_range(ROCKCHIP_SYSCON_PMUGRF);
 	debug("%s: pmugrf = %p\n", __func__, priv->pmugrf);
 	priv->info.base = CFG_SYS_SDRAM_BASE;
 	priv->info.size =
 		rockchip_sdram_size((phys_addr_t)&priv->pmugrf->os_reg2);
-#endif
+
 	return 0;
 }
 
-- 
2.34.1