[PATCH] net: ftgmac100: Fixed NC-SI PHY device cannot get
Jacky Chou
jacky_chou at aspeedtech.com
Fri Jun 28 09:14:45 CEST 2024
The NC-SI interface does not need the MDIO bus and the
NC-SI PHY device cannot get from dm_eth_phy_connect.
Therefore, use phy_connect directly here.
Signed-off-by: Jacky Chou <jacky_chou at aspeedtech.com>
---
drivers/net/ftgmac100.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/ftgmac100.c b/drivers/net/ftgmac100.c
index 9b536fd5ab..256a519020 100644
--- a/drivers/net/ftgmac100.c
+++ b/drivers/net/ftgmac100.c
@@ -223,7 +223,7 @@ static int ftgmac100_phy_init(struct udevice *dev)
struct phy_device *phydev;
int ret;
- if (IS_ENABLED(CONFIG_DM_MDIO))
+ if (IS_ENABLED(CONFIG_DM_MDIO) && priv->phy_mode != PHY_INTERFACE_MODE_NCSI)
phydev = dm_eth_phy_connect(dev);
else
phydev = phy_connect(priv->bus, priv->phy_addr, dev, priv->phy_mode);
--
2.25.1
More information about the U-Boot
mailing list