[PATCH 1/5] configs: zynqmp: don't remove power-domains for spl device tree

[Michal Simek]

On 2/23/24 15:06, Steffen Dirkwinkel wrote:
> From: Steffen Dirkwinkel <s.dirkwinkel at beckhoff.com>
> 
> These are used during sdhci initialization as functions are called with
> node_id even if we're not talking to the firmware.
> 
> Signed-off-by: Steffen Dirkwinkel <s.dirkwinkel at beckhoff.com>
> ---
> 
>   configs/xilinx_zynqmp_virt_defconfig | 2 +-
>   1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/configs/xilinx_zynqmp_virt_defconfig b/configs/xilinx_zynqmp_virt_defconfig
> index 1fcae45e95d..a96b088534a 100644
> --- a/configs/xilinx_zynqmp_virt_defconfig
> +++ b/configs/xilinx_zynqmp_virt_defconfig
> @@ -107,7 +107,7 @@ CONFIG_PARTITION_TYPE_GUID=y
>   CONFIG_SPL_OF_CONTROL=y
>   CONFIG_OF_BOARD=y
>   CONFIG_OF_LIST="avnet-ultra96-rev1 zynqmp-a2197-revA zynqmp-e-a2197-00-revA zynqmp-e-a2197-00-revB zynqmp-g-a2197-00-revA zynqmp-m-a2197-01-revA zynqmp-m-a2197-02-revA zynqmp-m-a2197-03-revA zynqmp-p-a2197-00-revA zynqmp-zc1232-revA zynqmp-zc1254-revA zynqmp-zc1751-xm015-dc1 zynqmp-zc1751-xm016-dc2 zynqmp-zc1751-xm017-dc3 zynqmp-zc1751-xm018-dc4 zynqmp-zc1751-xm019-dc5 zynqmp-zcu100-revC zynqmp-zcu102-rev1.1 zynqmp-zcu102-rev1.0 zynqmp-zcu102-revA zynqmp-zcu102-revB zynqmp-zcu104-revA zynqmp-zcu104-revC zynqmp-zcu106-revA zynqmp-zcu106-rev1.0 zynqmp-zcu111-revA zynqmp-zcu1275-revA zynqmp-zcu1275-revB zynqmp-zcu1285-revA zynqmp-zcu208-revA zynqmp-zcu216-revA zynqmp-topic-miamimp-xilinx-xdp-v1r1 zynqmp-sm-k26-revA zynqmp-smk-k26-revA zynqmp-dlc21-revA"
> -CONFIG_OF_SPL_REMOVE_PROPS="pinctrl-0 pinctrl-names interrupt-parent interrupts iommus power-domains"
> +CONFIG_OF_SPL_REMOVE_PROPS="pinctrl-0 pinctrl-names interrupt-parent interrupts iommus"
>   CONFIG_ENV_IS_NOWHERE=y
>   CONFIG_ENV_IS_IN_FAT=y
>   CONFIG_ENV_IS_IN_NAND=y

just FYI. I have asked my colleague to take this to regression and see if there 
is any issue. I will let you know when I know more.

Thanks,
Michal