[PATCH] configs: rockchip: rock5b: enable environment

[Christopher Obbard]

Hi Jonas & Trevor,

On Tue, 2024-03-05 at 10:31 +0100, Jonas Karlman wrote:
> Hi Trevor,
> 
> On 2024-03-05 03:10, Trevor Woerner wrote:
> > Following the pattern of other Rockchip devices, enable the U-Boot
> > environment to be stored in MMC. This patch specifically assumes the
> > environment will be stored on the SDcard.
> 
> This board has SPI flash, so storing env in SPI flash is probably a
> better default.

I agree with that.

> However, preferably the env should be stored/loaded from
> the same device that TPL/SPL was loaded from.

Do you know if there is some mechanism in U-Boot to do this already ?

It could be useful to enable autodetection on many boards which can boot U-
Boot from either SPI flash / eMMC / SD card.


Cheers!

Chris

> 
> Regards,
> Jonas
> 
> > 
> > Signed-off-by: Trevor Woerner <twoerner at gmail.com>
> > ---
> >  configs/rock5b-rk3588_defconfig | 2 ++
> >  1 file changed, 2 insertions(+)
> > 
> > diff --git a/configs/rock5b-rk3588_defconfig b/configs/rock5b-
> > rk3588_defconfig
> > index 0595325e8107..64a242003aa1 100644
> > --- a/configs/rock5b-rk3588_defconfig
> > +++ b/configs/rock5b-rk3588_defconfig
> > @@ -60,6 +60,8 @@ CONFIG_CMD_REGULATOR=y
> >  CONFIG_SPL_OF_CONTROL=y
> >  CONFIG_OF_LIVE=y
> >  CONFIG_OF_SPL_REMOVE_PROPS="clock-names interrupt-parent assigned-clocks
> > assigned-clock-rates assigned-clock-parents"
> > +CONFIG_ENV_IS_IN_MMC=y
> > +CONFIG_SYS_MMC_ENV_DEV=1
> >  CONFIG_SPL_DM_SEQ_ALIAS=y
> >  CONFIG_SPL_REGMAP=y
> >  CONFIG_SPL_SYSCON=y
>