[PATCH] configs: rockchip: rock-pi-s: enable environment

[Jonas Karlman]

Hi Trevor,

On 2024-03-05 03:10, Trevor Woerner wrote:
> Following the pattern of other Rockchip devices, enable the U-Boot environment
> to be stored in MMC. This patch specifically assumes the environment will be
> stored on the SDcard.

This board support optional emmc (sd nand), forcing env to sd-card does
not sound like a good idea, ideally the env is stored in the media where
TPL/SPL is running from.

Please note that booting from emmc is not working in current state, I
have an incoming series to improve support for this and other rk3308
boards. Hoping to have it on list later this week, see [1] for current
work-in-progress patches. It enables full support for usb otg/host, ums,
rockusb, emmc/sd nand, ethernet, ethaddr from serial#, rnd and fit
checksum validation on this board (tested on a v1.3 board).

[1] https://github.com/Kwiboo/u-boot-rockchip/commits/rk3308-2024.04

Regards,
Jonas

> 
> Signed-off-by: Trevor Woerner <twoerner at gmail.com>
> ---
>  configs/rock-pi-s-rk3308_defconfig | 2 ++
>  1 file changed, 2 insertions(+)
> 
> diff --git a/configs/rock-pi-s-rk3308_defconfig b/configs/rock-pi-s-rk3308_defconfig
> index 9908a4b4f457..af2cddcc2553 100644
> --- a/configs/rock-pi-s-rk3308_defconfig
> +++ b/configs/rock-pi-s-rk3308_defconfig
> @@ -54,7 +54,9 @@ CONFIG_EFI_PARTITION_ENTRIES_NUMBERS=64
>  CONFIG_SPL_OF_CONTROL=y
>  CONFIG_OF_LIVE=y
>  CONFIG_OF_SPL_REMOVE_PROPS="pinctrl-0 pinctrl-names clock-names interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents"
> +CONFIG_ENV_IS_IN_MMC=y
>  CONFIG_SYS_RELOC_GD_ENV_ADDR=y
> +CONFIG_SYS_MMC_ENV_DEV=1
>  CONFIG_REGMAP=y
>  CONFIG_SYSCON=y
>  CONFIG_CLK=y