[PATCH 1/4] configs: j7200_evm_*_defconfig: Enable OSPI configs

[Aniket Limaye]

Add the necessary configs required for OSPI functionality.
Also update the ospi flash partition offsets as per the devicetree.

Signed-off-by: Aniket Limaye <a-limaye at ti.com>
---
 configs/j7200_evm_a72_defconfig | 10 ++++++++--
 configs/j7200_evm_r5_defconfig  |  9 +++++++--
 2 files changed, 15 insertions(+), 4 deletions(-)

diff --git a/configs/j7200_evm_a72_defconfig b/configs/j7200_evm_a72_defconfig
index 2863472794..9ded9b2707 100644
--- a/configs/j7200_evm_a72_defconfig
+++ b/configs/j7200_evm_a72_defconfig
@@ -10,6 +10,8 @@ CONFIG_SOC_K3_J721E=y
 CONFIG_TARGET_J7200_A72_EVM=y
 CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
 CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x80480000
+CONFIG_SF_DEFAULT_SPEED=25000000
+CONFIG_SF_DEFAULT_MODE=0
 CONFIG_ENV_SIZE=0x20000
 CONFIG_DM_GPIO=y
 CONFIG_SPL_DM_SPI=y
@@ -61,7 +63,7 @@ CONFIG_SPL_RAM_DEVICE=y
 # CONFIG_SPL_SPI_FLASH_TINY is not set
 CONFIG_SPL_SPI_FLASH_SFDP_SUPPORT=y
 CONFIG_SPL_SPI_LOAD=y
-CONFIG_SYS_SPI_U_BOOT_OFFS=0x280000
+CONFIG_SYS_SPI_U_BOOT_OFFS=0x300000
 CONFIG_SPL_YMODEM_SUPPORT=y
 CONFIG_SYS_MAXARGS=64
 CONFIG_CMD_ASKENV=y
@@ -141,7 +143,11 @@ CONFIG_FLASH_CFI_MTD=y
 CONFIG_SYS_FLASH_CFI=y
 CONFIG_SYS_MAX_FLASH_BANKS_DETECT=y
 CONFIG_DM_SPI_FLASH=y
-CONFIG_SPI_FLASH_STMICRO=y
+CONFIG_SPI_FLASH_SFDP_SUPPORT=y
+CONFIG_SPI_FLASH_SOFT_RESET=y
+CONFIG_SPI_FLASH_SOFT_RESET_ON_BOOT=y
+CONFIG_SPI_FLASH_SPANSION=y
+CONFIG_SPI_FLASH_S28HX_T=y
 # CONFIG_SPI_FLASH_USE_4K_SECTORS is not set
 CONFIG_SPI_FLASH_MTD=y
 CONFIG_MULTIPLEXER=y
diff --git a/configs/j7200_evm_r5_defconfig b/configs/j7200_evm_r5_defconfig
index 05eea55cfe..de5aaaece8 100644
--- a/configs/j7200_evm_r5_defconfig
+++ b/configs/j7200_evm_r5_defconfig
@@ -10,6 +10,8 @@ CONFIG_K3_EARLY_CONS=y
 CONFIG_TARGET_J7200_R5_EVM=y
 CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
 CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x41cf5bfc
+CONFIG_SF_DEFAULT_SPEED=25000000
+CONFIG_SF_DEFAULT_MODE=0
 CONFIG_ENV_SIZE=0x20000
 CONFIG_DM_GPIO=y
 CONFIG_SPL_DM_SPI=y
@@ -60,7 +62,7 @@ CONFIG_SPL_REMOTEPROC=y
 # CONFIG_SPL_SPI_FLASH_TINY is not set
 CONFIG_SPL_SPI_FLASH_SFDP_SUPPORT=y
 CONFIG_SPL_SPI_LOAD=y
-CONFIG_SYS_SPI_U_BOOT_OFFS=0x80000
+CONFIG_SYS_SPI_U_BOOT_OFFS=0x100000
 CONFIG_SPL_YMODEM_SUPPORT=y
 CONFIG_HUSH_PARSER=y
 CONFIG_SYS_MAXARGS=64
@@ -117,7 +119,10 @@ CONFIG_SYS_FLASH_CFI=y
 CONFIG_SYS_MAX_FLASH_BANKS_DETECT=y
 CONFIG_DM_SPI_FLASH=y
 CONFIG_SPI_FLASH_SFDP_SUPPORT=y
-CONFIG_SPI_FLASH_STMICRO=y
+CONFIG_SPI_FLASH_SOFT_RESET=y
+CONFIG_SPI_FLASH_SOFT_RESET_ON_BOOT=y
+CONFIG_SPI_FLASH_SPANSION=y
+CONFIG_SPI_FLASH_S28HX_T=y
 CONFIG_PINCTRL=y
 # CONFIG_PINCTRL_GENERIC is not set
 CONFIG_SPL_PINCTRL=y
-- 
2.34.1