[PATCH] configs: imx8mp_beacon: Fall back to using TF-A

[Adam Ford]

When the board was originally added, it enabled some features which
allowed it to bypass Trusted Firmware, but as the feature set of
Linux grew and more features became available, the U-Boot config
options which bypassed TF-A caused issues, so it needs to return
to the standard operating mode of using TF-A or the system no
longer boots.

Fixes: ab53bd43dbde ("arm64: imx: Add support for imx8mp-beacon-kit")
Signed-off-by: Adam Ford <aford173 at gmail.com>

diff --git a/configs/imx8mp_beacon_defconfig b/configs/imx8mp_beacon_defconfig
index 29162ac9a4..9d09dd4a7c 100644
--- a/configs/imx8mp_beacon_defconfig
+++ b/configs/imx8mp_beacon_defconfig
@@ -14,7 +14,6 @@ CONFIG_ENV_OFFSET=0xFFFFDE00
 CONFIG_DM_GPIO=y
 CONFIG_DEFAULT_DEVICE_TREE="imx8mp-beacon-kit"
 CONFIG_SPL_TEXT_BASE=0x920000
-CONFIG_SYS_HAS_ARMV8_SECURE_BASE=y
 CONFIG_TARGET_IMX8MP_BEACON=y
 CONFIG_SYS_MONITOR_LEN=524288
 CONFIG_SPL_MMC=y
@@ -23,13 +22,8 @@ CONFIG_SPL_DRIVERS_MISC=y
 CONFIG_SPL_STACK=0x960000
 CONFIG_SPL=y
 CONFIG_ARMV8_SPL_EXCEPTION_VECTORS=y
-CONFIG_ARMV8_MULTIENTRY=y
 CONFIG_ARMV8_SET_SMPEN=y
 # CONFIG_PSCI_RESET is not set
-CONFIG_ARMV8_PSCI=y
-CONFIG_ARMV8_PSCI_CPUS_PER_CLUSTER=4
-CONFIG_ARMV8_PSCI_RELOCATE=y
-CONFIG_ARMV8_SECURE_BASE=0x970000
 CONFIG_ARMV8_EA_EL3_FIRST=y
 CONFIG_SPL_IMX_ROMAPI_LOADADDR=0x48000000
 CONFIG_SYS_LOAD_ADDR=0x40480000
@@ -85,7 +79,6 @@ CONFIG_ENV_IS_IN_MMC=y
 CONFIG_SYS_RELOC_GD_ENV_ADDR=y
 CONFIG_SYS_MMC_ENV_DEV=2
 CONFIG_SYS_MMC_ENV_PART=2
-CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y
 CONFIG_USE_ETHPRIME=y
 CONFIG_ETHPRIME="eth1"
 CONFIG_SPL_DM=y
-- 
2.43.0