[PATCH] clk: Propagate clk_set_rate() if CLK_SET_PARENT_RATE present

[Sam Protsenko]

Sometimes clocks provided to a consumer might not have .set_rate
operation (like gate or mux clocks), but have CLK_SET_PARENT_RATE flag
set. In that case it's usually possible to find a parent up the tree
which is capable of setting the rate (div, pll, etc). Implement a simple
lookup procedure for such cases, to traverse the clock tree until
.set_rate capable parent is found, and use that parent to actually
change the rate. The search will stop once the first .set_rate capable
clock is found, which is usually enough to handle most cases.

Signed-off-by: Sam Protsenko <semen.protsenko at linaro.org>
---
 drivers/clk/clk-uclass.c | 16 ++++++++++++++--
 1 file changed, 14 insertions(+), 2 deletions(-)

diff --git a/drivers/clk/clk-uclass.c b/drivers/clk/clk-uclass.c
index ed6e60bc4841..755f05f34669 100644
--- a/drivers/clk/clk-uclass.c
+++ b/drivers/clk/clk-uclass.c
@@ -571,8 +571,20 @@ ulong clk_set_rate(struct clk *clk, ulong rate)
 		return 0;
 	ops = clk_dev_ops(clk->dev);
 
-	if (!ops->set_rate)
-		return -ENOSYS;
+	/* Try to find parents which can set rate */
+	while (!ops->set_rate) {
+		struct clk *parent;
+
+		if (!(clk->flags & CLK_SET_RATE_PARENT))
+			return -ENOSYS;
+
+		parent = clk_get_parent(clk);
+		if (IS_ERR_OR_NULL(parent) || !clk_valid(parent))
+			return -ENODEV;
+
+		clk = parent;
+		ops = clk_dev_ops(clk->dev);
+	}
 
 	/* get private clock struct used for cache */
 	clk_get_priv(clk, &clkp);
-- 
2.39.2