[PATCH v2 1/2] arm: socfpga: arria10: add option to reprogram the FPGA every reboot

[Marek Vasut]

On 3/8/24 6:12 PM, Michał Barnaś wrote:
> Add Kconfig that enables FPGA reprogramming with warm boot on Arria 10.
> This option allows to change the bitstream on the filesystem and apply
> changes with warm reboot without the need for a power cycle.
> 
> Signed-off-by: Michał Barnaś <barnas at google.com>
> ---
> 
> Changes in v2:
> - Rebase on current master branch
> 
>   arch/arm/mach-socfpga/Kconfig   | 8 ++++++++
>   arch/arm/mach-socfpga/spl_a10.c | 8 ++++++++
>   2 files changed, 16 insertions(+)
> 
> diff --git a/arch/arm/mach-socfpga/Kconfig b/arch/arm/mach-socfpga/Kconfig
> index 114d243812..89303f1f16 100644
> --- a/arch/arm/mach-socfpga/Kconfig
> +++ b/arch/arm/mach-socfpga/Kconfig
> @@ -80,6 +80,14 @@ config TARGET_SOCFPGA_ARRIA10
>   	imply FPGA_SOCFPGA
>   	imply SPL_USE_TINY_PRINTF
>   
> +config TARGET_SOCFPGA_ARRIA10_ALWAYS_REPROGRAM

This is not TARGET (as in SoC), but a regular config option, so please 
drop the TARGET_ prefix .

> +	bool "Always reprogram Arria 10 FPGA"
> +	depends on TARGET_SOCFPGA_ARRIA10
> +	help
> +	  Arria 10 FPGA is only programmed during the cold boot.
> +	  This option forces the FPGA to be reprogrammed every reboot,
> +	  allowing to change the bitstream and apply it with warm reboot.
> +
>   config TARGET_SOCFPGA_CYCLONE5
>   	bool
>   	select TARGET_SOCFPGA_GEN5
> diff --git a/arch/arm/mach-socfpga/spl_a10.c b/arch/arm/mach-socfpga/spl_a10.c
> index 9edbbf4a29..d5d3327a42 100644
> --- a/arch/arm/mach-socfpga/spl_a10.c
> +++ b/arch/arm/mach-socfpga/spl_a10.c
> @@ -122,7 +122,11 @@ void spl_board_init(void)
>   	arch_early_init_r();
>   
>   	/* If the full FPGA is already loaded, ie.from EPCQ, config fpga pins */
> +#ifdef CONFIG_TARGET_SOCFPGA_ARRIA10_ALWAYS_REPROGRAM
> +	if (is_regular_boot_valid()) {
> +#else
>   	if (is_fpgamgr_user_mode()) {
> +#endif

Use CONFIG_IS_ENABLED() or IS_ENABLED() macro please .