[PATCH v2 3/4] rockchip: board: Use a common USB Product ID for UMS

[Jonas Karlman]

Change to use the common Product ID 0x0010 when the ums command is used.

This matches downstream vendor U-Boot and is a Product ID that tools
such as rkdeveloptool and RKDevTool will identify as MSC mode.

Signed-off-by: Jonas Karlman <jonas at kwiboo.se>
Reviewed-by: Kever Yang <kever.yang at rock-chips.com>
---
v2:
- No change
- Collect r-b tag
---
 arch/arm/mach-rockchip/board.c | 17 ++++++++++++++++-
 1 file changed, 16 insertions(+), 1 deletion(-)

diff --git a/arch/arm/mach-rockchip/board.c b/arch/arm/mach-rockchip/board.c
index f84ff542aea9..e9cfba756639 100644
--- a/arch/arm/mach-rockchip/board.c
+++ b/arch/arm/mach-rockchip/board.c
@@ -221,8 +221,23 @@ void enable_caches(void)
 #endif
 
 #if IS_ENABLED(CONFIG_USB_GADGET)
-#if IS_ENABLED(CONFIG_USB_GADGET_DWC2_OTG) && !IS_ENABLED(CONFIG_DM_USB_GADGET)
 #include <usb.h>
+
+#if IS_ENABLED(CONFIG_USB_GADGET_DOWNLOAD)
+#define ROCKCHIP_G_DNL_UMS_PRODUCT_NUM	0x0010
+
+int g_dnl_bind_fixup(struct usb_device_descriptor *dev, const char *name)
+{
+	if (!strcmp(name, "usb_dnl_ums"))
+		put_unaligned(ROCKCHIP_G_DNL_UMS_PRODUCT_NUM, &dev->idProduct);
+	else
+		put_unaligned(CONFIG_USB_GADGET_PRODUCT_NUM, &dev->idProduct);
+
+	return 0;
+}
+#endif /* CONFIG_USB_GADGET_DOWNLOAD */
+
+#if IS_ENABLED(CONFIG_USB_GADGET_DWC2_OTG) && !IS_ENABLED(CONFIG_DM_USB_GADGET)
 #include <linux/usb/otg.h>
 #include <usb/dwc2_udc.h>
 
-- 
2.43.2