[PATCH 10/11] rockchip: theobroma-systems: puma: Migrate to use IO-domain driver
Kever Yang
kever.yang at rock-chips.com
Mon Mar 11 10:39:34 CET 2024
On 2024/2/18 02:35, Jonas Karlman wrote:
> Switch to use the IO-domain driver to configure IO-domain based on
> device tree instead of a setup_iodomain() function.
>
> Signed-off-by: Jonas Karlman <jonas at kwiboo.se>
Reviewed-by: Kever Yang <kever.yang at rock-chips.com>
Thanks,
- Kever
> ---
> This should be runtime tested by someone with a puma device. All DT
> props and driver seem to be enabled and I expect the io_vsel to be
> configured with correct value.
> ---
> .../puma_rk3399/puma-rk3399.c | 21 -------------------
> configs/puma-rk3399_defconfig | 1 +
> 2 files changed, 1 insertion(+), 21 deletions(-)
>
> diff --git a/board/theobroma-systems/puma_rk3399/puma-rk3399.c b/board/theobroma-systems/puma_rk3399/puma-rk3399.c
> index 8b998ef45565..eeb8a99231e4 100644
> --- a/board/theobroma-systems/puma_rk3399/puma-rk3399.c
> +++ b/board/theobroma-systems/puma_rk3399/puma-rk3399.c
> @@ -3,31 +3,10 @@
> * (C) Copyright 2017 Theobroma Systems Design und Consulting GmbH
> */
>
> -#include <dm.h>
> -#include <syscon.h>
> -#include <dm/pinctrl.h>
> -#include <asm/arch-rockchip/clock.h>
> -#include <asm/arch-rockchip/hardware.h>
> -#include <asm/arch-rockchip/grf_rk3399.h>
> #include "../common/common.h"
>
> -static void setup_iodomain(void)
> -{
> - const u32 GRF_IO_VSEL_GPIO4CD_SHIFT = 3;
> - struct rk3399_grf_regs *grf =
> - syscon_get_first_range(ROCKCHIP_SYSCON_GRF);
> -
> - /*
> - * Set bit 3 in GRF_IO_VSEL so PCIE_RST# works (pin GPIO4_C6).
> - * Linux assumes that PCIE_RST# works out of the box as it probes
> - * PCIe before loading the iodomain driver.
> - */
> - rk_setreg(&grf->io_vsel, 1 << GRF_IO_VSEL_GPIO4CD_SHIFT);
> -}
> -
> int rockchip_early_misc_init_r(void)
> {
> - setup_iodomain();
> setup_boottargets();
>
> return 0;
> diff --git a/configs/puma-rk3399_defconfig b/configs/puma-rk3399_defconfig
> index 818bfdf9aa9b..e30305abfafd 100644
> --- a/configs/puma-rk3399_defconfig
> +++ b/configs/puma-rk3399_defconfig
> @@ -66,6 +66,7 @@ CONFIG_GPIO_HOG=y
> CONFIG_SPL_GPIO_HOG=y
> CONFIG_ROCKCHIP_GPIO=y
> CONFIG_SYS_I2C_ROCKCHIP=y
> +CONFIG_ROCKCHIP_IODOMAIN=y
> CONFIG_MMC_DW=y
> CONFIG_MMC_DW_ROCKCHIP=y
> CONFIG_MMC_SDHCI=y
More information about the U-Boot
mailing list