[PATCH v3 5/6] rockchip: Use common bss and stack addresses on RK356x

Kever Yang kever.yang at rock-chips.com
Mon Mar 11 10:57:32 CET 2024


On 2024/3/3 03:16, Jonas Karlman wrote:
> Currently the following memory layout is typically used on RK356x:
> [    0, 256K) - SPL binary
> [ 256K,   2M) - TF-A / reserved
> [   -X,   4M) - SPL pre-reloc stack (SPL_STACK)
> [-128K,   4M)   - pre-reloc malloc heap (SPL_SYS_MALLOC_F_LEN)
> [   -X,   6M) - SPL reloc stack (SPL_STACK_R_ADDR)
> [   5M,   6M)   - reloc malloc heap (SPL_STACK_R_MALLOC_SIMPLE_LEN)
> [  10M,   +X) - U-Boot proper binary (TEXT_BASE)
> [   -X,  12M) - U-Boot proper pre-reloc stack (CUSTOM_SYS_INIT_SP_ADDR)
> [-128K,  12M)   - pre-reloc malloc heap (SYS_MALLOC_F_LEN)
> [  64M, +16K) - SPL bss (SPL_BSS_START_ADDR, SPL_BSS_MAX_SIZE)
>
> SPL can safely load U-Boot proper + FDT to [10M, 12M-128K) with this
> layout.
>
> Migrate to use common bss, stack and malloc heap size and addresses to
> remove this size limitation.
>
> Signed-off-by: Jonas Karlman <jonas at kwiboo.se>
Reviewed-by: Kever Yang <kever.yang at rock-chips.com>

Thanks,
- Kever
> ---
>   arch/arm/mach-rockchip/rk3568/Kconfig     |  7 +++++--
>   configs/anbernic-rgxx3-rk3566_defconfig   | 13 -------------
>   configs/bpi-r2-pro-rk3568_defconfig       | 13 -------------
>   configs/evb-rk3568_defconfig              | 13 -------------
>   configs/generic-rk3568_defconfig          | 13 -------------
>   configs/lubancat-2-rk3568_defconfig       | 13 -------------
>   configs/nanopi-r5c-rk3568_defconfig       | 13 -------------
>   configs/nanopi-r5s-rk3568_defconfig       | 13 -------------
>   configs/odroid-m1-rk3568_defconfig        | 13 -------------
>   configs/quartz64-a-rk3566_defconfig       | 13 -------------
>   configs/quartz64-b-rk3566_defconfig       | 13 -------------
>   configs/radxa-cm3-io-rk3566_defconfig     | 13 -------------
>   configs/radxa-e25-rk3568_defconfig        | 13 -------------
>   configs/rock-3a-rk3568_defconfig          | 13 -------------
>   configs/soquartz-blade-rk3566_defconfig   | 13 -------------
>   configs/soquartz-cm4-rk3566_defconfig     | 13 -------------
>   configs/soquartz-model-a-rk3566_defconfig | 13 -------------
>   17 files changed, 5 insertions(+), 210 deletions(-)
>
> diff --git a/arch/arm/mach-rockchip/rk3568/Kconfig b/arch/arm/mach-rockchip/rk3568/Kconfig
> index baa51349f4be..af537d912a62 100644
> --- a/arch/arm/mach-rockchip/rk3568/Kconfig
> +++ b/arch/arm/mach-rockchip/rk3568/Kconfig
> @@ -38,8 +38,11 @@ config ROCKCHIP_STIMER_BASE
>   config SYS_SOC
>   	default "rk3568"
>   
> -config SYS_MALLOC_F_LEN
> -	default 0x20000
> +config ROCKCHIP_COMMON_STACK_ADDR
> +	default y
> +
> +config TEXT_BASE
> +	default 0x00a00000
>   
>   source "board/rockchip/evb_rk3568/Kconfig"
>   source "board/anbernic/rgxx3_rk3566/Kconfig"
> diff --git a/configs/anbernic-rgxx3-rk3566_defconfig b/configs/anbernic-rgxx3-rk3566_defconfig
> index ed6643d9d4fa..2b484fcaef5e 100644
> --- a/configs/anbernic-rgxx3-rk3566_defconfig
> +++ b/configs/anbernic-rgxx3-rk3566_defconfig
> @@ -2,22 +2,14 @@ CONFIG_ARM=y
>   CONFIG_SKIP_LOWLEVEL_INIT=y
>   CONFIG_COUNTER_FREQUENCY=24000000
>   CONFIG_ARCH_ROCKCHIP=y
> -CONFIG_TEXT_BASE=0x00a00000
> -CONFIG_SPL_LIBCOMMON_SUPPORT=y
> -CONFIG_SPL_LIBGENERIC_SUPPORT=y
>   CONFIG_NR_DRAM_BANKS=2
> -CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
> -CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0xc00000
>   CONFIG_DEFAULT_DEVICE_TREE="rk3566-anbernic-rgxx3"
>   CONFIG_ROCKCHIP_RK3568=y
>   CONFIG_SPL_ROCKCHIP_BACK_TO_BROM=y
> -CONFIG_SPL_ROCKCHIP_COMMON_BOARD=y
>   CONFIG_ROCKCHIP_RK8XX_DISABLE_BOOT_ON_POWERON=y
>   CONFIG_SPL_MMC=y
>   CONFIG_SPL_SERIAL=y
> -CONFIG_SPL_STACK_R_ADDR=0x600000
>   CONFIG_TARGET_ANBERNIC_RGXX3_RK3566=y
> -CONFIG_SPL_STACK=0x400000
>   CONFIG_DEBUG_UART_BASE=0xFE660000
>   CONFIG_DEBUG_UART_CLOCK=24000000
>   CONFIG_SYS_LOAD_ADDR=0xc00800
> @@ -34,13 +26,8 @@ CONFIG_DISPLAY_BOARDINFO_LATE=y
>   CONFIG_BOARD_RNG_SEED=y
>   CONFIG_SPL_MAX_SIZE=0x20000
>   CONFIG_SPL_PAD_TO=0x7f8000
> -CONFIG_SPL_HAS_BSS_LINKER_SECTION=y
> -CONFIG_SPL_BSS_START_ADDR=0x4000000
> -CONFIG_SPL_BSS_MAX_SIZE=0x4000
>   CONFIG_SPL_BOARD_INIT=y
>   # CONFIG_SPL_RAW_IMAGE_SUPPORT is not set
> -# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set
> -CONFIG_SPL_STACK_R=y
>   CONFIG_SPL_ATF=y
>   CONFIG_CMD_PWM=y
>   CONFIG_CMD_GPT=y
> diff --git a/configs/bpi-r2-pro-rk3568_defconfig b/configs/bpi-r2-pro-rk3568_defconfig
> index e6e0e6fc6fa6..5cc95241ba43 100644
> --- a/configs/bpi-r2-pro-rk3568_defconfig
> +++ b/configs/bpi-r2-pro-rk3568_defconfig
> @@ -2,18 +2,10 @@ CONFIG_ARM=y
>   CONFIG_SKIP_LOWLEVEL_INIT=y
>   CONFIG_COUNTER_FREQUENCY=24000000
>   CONFIG_ARCH_ROCKCHIP=y
> -CONFIG_TEXT_BASE=0x00a00000
> -CONFIG_SPL_LIBCOMMON_SUPPORT=y
> -CONFIG_SPL_LIBGENERIC_SUPPORT=y
>   CONFIG_NR_DRAM_BANKS=2
> -CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
> -CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0xc00000
>   CONFIG_DEFAULT_DEVICE_TREE="rk3568-bpi-r2-pro"
>   CONFIG_ROCKCHIP_RK3568=y
> -CONFIG_SPL_ROCKCHIP_COMMON_BOARD=y
>   CONFIG_SPL_SERIAL=y
> -CONFIG_SPL_STACK_R_ADDR=0x600000
> -CONFIG_SPL_STACK=0x400000
>   CONFIG_DEBUG_UART_BASE=0xFE660000
>   CONFIG_DEBUG_UART_CLOCK=24000000
>   CONFIG_SYS_LOAD_ADDR=0xc00800
> @@ -30,12 +22,7 @@ CONFIG_DEFAULT_FDT_FILE="rockchip/rk3568-bpi-r2-pro.dtb"
>   CONFIG_DISPLAY_BOARDINFO_LATE=y
>   CONFIG_SPL_MAX_SIZE=0x40000
>   CONFIG_SPL_PAD_TO=0x7f8000
> -CONFIG_SPL_HAS_BSS_LINKER_SECTION=y
> -CONFIG_SPL_BSS_START_ADDR=0x4000000
> -CONFIG_SPL_BSS_MAX_SIZE=0x4000
>   # CONFIG_SPL_RAW_IMAGE_SUPPORT is not set
> -# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set
> -CONFIG_SPL_STACK_R=y
>   CONFIG_SPL_ATF=y
>   CONFIG_SYS_PROMPT="BPI-R2PRO> "
>   CONFIG_CMD_GPIO=y
> diff --git a/configs/evb-rk3568_defconfig b/configs/evb-rk3568_defconfig
> index cb9b87ff12cb..6e8061f5f487 100644
> --- a/configs/evb-rk3568_defconfig
> +++ b/configs/evb-rk3568_defconfig
> @@ -2,18 +2,10 @@ CONFIG_ARM=y
>   CONFIG_SKIP_LOWLEVEL_INIT=y
>   CONFIG_COUNTER_FREQUENCY=24000000
>   CONFIG_ARCH_ROCKCHIP=y
> -CONFIG_TEXT_BASE=0x00a00000
> -CONFIG_SPL_LIBCOMMON_SUPPORT=y
> -CONFIG_SPL_LIBGENERIC_SUPPORT=y
>   CONFIG_NR_DRAM_BANKS=2
> -CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
> -CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0xc00000
>   CONFIG_DEFAULT_DEVICE_TREE="rk3568-evb"
>   CONFIG_ROCKCHIP_RK3568=y
> -CONFIG_SPL_ROCKCHIP_COMMON_BOARD=y
>   CONFIG_SPL_SERIAL=y
> -CONFIG_SPL_STACK_R_ADDR=0x600000
> -CONFIG_SPL_STACK=0x400000
>   CONFIG_DEBUG_UART_BASE=0xFE660000
>   CONFIG_DEBUG_UART_CLOCK=24000000
>   CONFIG_SYS_LOAD_ADDR=0xc00800
> @@ -28,12 +20,7 @@ CONFIG_DEFAULT_FDT_FILE="rockchip/rk3568-evb.dtb"
>   CONFIG_DISPLAY_BOARDINFO_LATE=y
>   CONFIG_SPL_MAX_SIZE=0x40000
>   CONFIG_SPL_PAD_TO=0x7f8000
> -CONFIG_SPL_HAS_BSS_LINKER_SECTION=y
> -CONFIG_SPL_BSS_START_ADDR=0x4000000
> -CONFIG_SPL_BSS_MAX_SIZE=0x4000
>   # CONFIG_SPL_RAW_IMAGE_SUPPORT is not set
> -# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set
> -CONFIG_SPL_STACK_R=y
>   CONFIG_SPL_ATF=y
>   CONFIG_CMD_GPIO=y
>   CONFIG_CMD_GPT=y
> diff --git a/configs/generic-rk3568_defconfig b/configs/generic-rk3568_defconfig
> index 8fb79c9b4403..e7d5e55bbfd8 100644
> --- a/configs/generic-rk3568_defconfig
> +++ b/configs/generic-rk3568_defconfig
> @@ -2,18 +2,10 @@ CONFIG_ARM=y
>   CONFIG_SKIP_LOWLEVEL_INIT=y
>   CONFIG_COUNTER_FREQUENCY=24000000
>   CONFIG_ARCH_ROCKCHIP=y
> -CONFIG_TEXT_BASE=0x00a00000
> -CONFIG_SPL_LIBCOMMON_SUPPORT=y
> -CONFIG_SPL_LIBGENERIC_SUPPORT=y
>   CONFIG_NR_DRAM_BANKS=2
> -CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
> -CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0xc00000
>   CONFIG_DEFAULT_DEVICE_TREE="rk3568-generic"
>   CONFIG_ROCKCHIP_RK3568=y
> -CONFIG_SPL_ROCKCHIP_COMMON_BOARD=y
>   CONFIG_SPL_SERIAL=y
> -CONFIG_SPL_STACK_R_ADDR=0x600000
> -CONFIG_SPL_STACK=0x400000
>   CONFIG_DEBUG_UART_BASE=0xFE660000
>   CONFIG_DEBUG_UART_CLOCK=24000000
>   CONFIG_SYS_LOAD_ADDR=0xc00800
> @@ -28,12 +20,7 @@ CONFIG_DEFAULT_FDT_FILE="rockchip/rk3568-generic.dtb"
>   CONFIG_DISPLAY_BOARDINFO_LATE=y
>   CONFIG_SPL_MAX_SIZE=0x40000
>   CONFIG_SPL_PAD_TO=0x7f8000
> -CONFIG_SPL_HAS_BSS_LINKER_SECTION=y
> -CONFIG_SPL_BSS_START_ADDR=0x4000000
> -CONFIG_SPL_BSS_MAX_SIZE=0x4000
>   # CONFIG_SPL_RAW_IMAGE_SUPPORT is not set
> -# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set
> -CONFIG_SPL_STACK_R=y
>   CONFIG_SPL_ATF=y
>   CONFIG_CMD_GPIO=y
>   CONFIG_CMD_GPT=y
> diff --git a/configs/lubancat-2-rk3568_defconfig b/configs/lubancat-2-rk3568_defconfig
> index 80ae6ec3a2e9..1c50a0ccbe60 100644
> --- a/configs/lubancat-2-rk3568_defconfig
> +++ b/configs/lubancat-2-rk3568_defconfig
> @@ -2,18 +2,10 @@ CONFIG_ARM=y
>   CONFIG_SKIP_LOWLEVEL_INIT=y
>   CONFIG_COUNTER_FREQUENCY=24000000
>   CONFIG_ARCH_ROCKCHIP=y
> -CONFIG_TEXT_BASE=0x00a00000
> -CONFIG_SPL_LIBCOMMON_SUPPORT=y
> -CONFIG_SPL_LIBGENERIC_SUPPORT=y
>   CONFIG_NR_DRAM_BANKS=2
> -CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
> -CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0xc00000
>   CONFIG_DEFAULT_DEVICE_TREE="rk3568-lubancat-2"
>   CONFIG_ROCKCHIP_RK3568=y
> -CONFIG_SPL_ROCKCHIP_COMMON_BOARD=y
>   CONFIG_SPL_SERIAL=y
> -CONFIG_SPL_STACK_R_ADDR=0x600000
> -CONFIG_SPL_STACK=0x400000
>   CONFIG_DEBUG_UART_BASE=0xFE660000
>   CONFIG_DEBUG_UART_CLOCK=24000000
>   CONFIG_SYS_LOAD_ADDR=0xc00800
> @@ -28,12 +20,7 @@ CONFIG_DEFAULT_FDT_FILE="rockchip/rk3568-lubancat-2.dtb"
>   CONFIG_DISPLAY_BOARDINFO_LATE=y
>   CONFIG_SPL_MAX_SIZE=0x40000
>   CONFIG_SPL_PAD_TO=0x7f8000
> -CONFIG_SPL_HAS_BSS_LINKER_SECTION=y
> -CONFIG_SPL_BSS_START_ADDR=0x4000000
> -CONFIG_SPL_BSS_MAX_SIZE=0x4000
>   # CONFIG_SPL_RAW_IMAGE_SUPPORT is not set
> -# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set
> -CONFIG_SPL_STACK_R=y
>   CONFIG_SPL_ATF=y
>   CONFIG_CMD_GPIO=y
>   CONFIG_CMD_GPT=y
> diff --git a/configs/nanopi-r5c-rk3568_defconfig b/configs/nanopi-r5c-rk3568_defconfig
> index f5a472d03d78..0f1a9461a0ce 100644
> --- a/configs/nanopi-r5c-rk3568_defconfig
> +++ b/configs/nanopi-r5c-rk3568_defconfig
> @@ -3,18 +3,10 @@ CONFIG_SKIP_LOWLEVEL_INIT=y
>   CONFIG_SYS_HAS_NONCACHED_MEMORY=y
>   CONFIG_COUNTER_FREQUENCY=24000000
>   CONFIG_ARCH_ROCKCHIP=y
> -CONFIG_TEXT_BASE=0x00a00000
> -CONFIG_SPL_LIBCOMMON_SUPPORT=y
> -CONFIG_SPL_LIBGENERIC_SUPPORT=y
>   CONFIG_NR_DRAM_BANKS=2
> -CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
> -CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0xc00000
>   CONFIG_DEFAULT_DEVICE_TREE="rk3568-nanopi-r5c"
>   CONFIG_ROCKCHIP_RK3568=y
> -CONFIG_SPL_ROCKCHIP_COMMON_BOARD=y
>   CONFIG_SPL_SERIAL=y
> -CONFIG_SPL_STACK_R_ADDR=0x600000
> -CONFIG_SPL_STACK=0x400000
>   CONFIG_DEBUG_UART_BASE=0xFE660000
>   CONFIG_DEBUG_UART_CLOCK=24000000
>   CONFIG_SYS_LOAD_ADDR=0xc00800
> @@ -30,12 +22,7 @@ CONFIG_DEFAULT_FDT_FILE="rockchip/rk3568-nanopi-r5c.dtb"
>   CONFIG_DISPLAY_BOARDINFO_LATE=y
>   CONFIG_SPL_MAX_SIZE=0x40000
>   CONFIG_SPL_PAD_TO=0x7f8000
> -CONFIG_SPL_HAS_BSS_LINKER_SECTION=y
> -CONFIG_SPL_BSS_START_ADDR=0x4000000
> -CONFIG_SPL_BSS_MAX_SIZE=0x4000
>   # CONFIG_SPL_RAW_IMAGE_SUPPORT is not set
> -# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set
> -CONFIG_SPL_STACK_R=y
>   CONFIG_SPL_ATF=y
>   CONFIG_CMD_GPIO=y
>   CONFIG_CMD_GPT=y
> diff --git a/configs/nanopi-r5s-rk3568_defconfig b/configs/nanopi-r5s-rk3568_defconfig
> index 99692d341f44..4ebf0cc9ee88 100644
> --- a/configs/nanopi-r5s-rk3568_defconfig
> +++ b/configs/nanopi-r5s-rk3568_defconfig
> @@ -3,18 +3,10 @@ CONFIG_SKIP_LOWLEVEL_INIT=y
>   CONFIG_SYS_HAS_NONCACHED_MEMORY=y
>   CONFIG_COUNTER_FREQUENCY=24000000
>   CONFIG_ARCH_ROCKCHIP=y
> -CONFIG_TEXT_BASE=0x00a00000
> -CONFIG_SPL_LIBCOMMON_SUPPORT=y
> -CONFIG_SPL_LIBGENERIC_SUPPORT=y
>   CONFIG_NR_DRAM_BANKS=2
> -CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
> -CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0xc00000
>   CONFIG_DEFAULT_DEVICE_TREE="rk3568-nanopi-r5s"
>   CONFIG_ROCKCHIP_RK3568=y
> -CONFIG_SPL_ROCKCHIP_COMMON_BOARD=y
>   CONFIG_SPL_SERIAL=y
> -CONFIG_SPL_STACK_R_ADDR=0x600000
> -CONFIG_SPL_STACK=0x400000
>   CONFIG_DEBUG_UART_BASE=0xFE660000
>   CONFIG_DEBUG_UART_CLOCK=24000000
>   CONFIG_SYS_LOAD_ADDR=0xc00800
> @@ -30,12 +22,7 @@ CONFIG_DEFAULT_FDT_FILE="rockchip/rk3568-nanopi-r5s.dtb"
>   CONFIG_DISPLAY_BOARDINFO_LATE=y
>   CONFIG_SPL_MAX_SIZE=0x40000
>   CONFIG_SPL_PAD_TO=0x7f8000
> -CONFIG_SPL_HAS_BSS_LINKER_SECTION=y
> -CONFIG_SPL_BSS_START_ADDR=0x4000000
> -CONFIG_SPL_BSS_MAX_SIZE=0x4000
>   # CONFIG_SPL_RAW_IMAGE_SUPPORT is not set
> -# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set
> -CONFIG_SPL_STACK_R=y
>   CONFIG_SPL_ATF=y
>   CONFIG_CMD_GPIO=y
>   CONFIG_CMD_GPT=y
> diff --git a/configs/odroid-m1-rk3568_defconfig b/configs/odroid-m1-rk3568_defconfig
> index 3130e341e776..b5ed9e4bc98e 100644
> --- a/configs/odroid-m1-rk3568_defconfig
> +++ b/configs/odroid-m1-rk3568_defconfig
> @@ -2,22 +2,14 @@ CONFIG_ARM=y
>   CONFIG_SKIP_LOWLEVEL_INIT=y
>   CONFIG_COUNTER_FREQUENCY=24000000
>   CONFIG_ARCH_ROCKCHIP=y
> -CONFIG_TEXT_BASE=0x00a00000
> -CONFIG_SPL_LIBCOMMON_SUPPORT=y
> -CONFIG_SPL_LIBGENERIC_SUPPORT=y
>   CONFIG_NR_DRAM_BANKS=2
> -CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
> -CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0xc00000
>   CONFIG_SF_DEFAULT_SPEED=24000000
>   CONFIG_SF_DEFAULT_MODE=0x1000
>   CONFIG_DEFAULT_DEVICE_TREE="rk3568-odroid-m1"
>   CONFIG_ROCKCHIP_RK3568=y
> -CONFIG_SPL_ROCKCHIP_COMMON_BOARD=y
>   CONFIG_ROCKCHIP_SPI_IMAGE=y
>   CONFIG_SPL_SERIAL=y
> -CONFIG_SPL_STACK_R_ADDR=0x600000
>   CONFIG_TARGET_ODROID_M1_RK3568=y
> -CONFIG_SPL_STACK=0x400000
>   CONFIG_DEBUG_UART_BASE=0xFE660000
>   CONFIG_DEBUG_UART_CLOCK=24000000
>   CONFIG_SPL_SPI_FLASH_SUPPORT=y
> @@ -36,12 +28,7 @@ CONFIG_DEFAULT_FDT_FILE="rockchip/rk3568-odroid-m1.dtb"
>   CONFIG_DISPLAY_BOARDINFO_LATE=y
>   CONFIG_SPL_MAX_SIZE=0x40000
>   CONFIG_SPL_PAD_TO=0x7f8000
> -CONFIG_SPL_HAS_BSS_LINKER_SECTION=y
> -CONFIG_SPL_BSS_START_ADDR=0x4000000
> -CONFIG_SPL_BSS_MAX_SIZE=0x4000
>   # CONFIG_SPL_RAW_IMAGE_SUPPORT is not set
> -# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set
> -CONFIG_SPL_STACK_R=y
>   CONFIG_SPL_SPI_LOAD=y
>   CONFIG_SYS_SPI_U_BOOT_OFFS=0x100000
>   CONFIG_SPL_ATF=y
> diff --git a/configs/quartz64-a-rk3566_defconfig b/configs/quartz64-a-rk3566_defconfig
> index ade08867f60f..fef80439d89b 100644
> --- a/configs/quartz64-a-rk3566_defconfig
> +++ b/configs/quartz64-a-rk3566_defconfig
> @@ -2,23 +2,15 @@ CONFIG_ARM=y
>   CONFIG_SKIP_LOWLEVEL_INIT=y
>   CONFIG_COUNTER_FREQUENCY=24000000
>   CONFIG_ARCH_ROCKCHIP=y
> -CONFIG_TEXT_BASE=0x00a00000
>   CONFIG_SPL_GPIO=y
> -CONFIG_SPL_LIBCOMMON_SUPPORT=y
> -CONFIG_SPL_LIBGENERIC_SUPPORT=y
>   CONFIG_NR_DRAM_BANKS=2
> -CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
> -CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0xc00000
>   CONFIG_SF_DEFAULT_SPEED=24000000
>   CONFIG_SF_DEFAULT_MODE=0x2000
>   CONFIG_DEFAULT_DEVICE_TREE="rk3566-quartz64-a"
>   CONFIG_ROCKCHIP_RK3568=y
> -CONFIG_SPL_ROCKCHIP_COMMON_BOARD=y
>   CONFIG_ROCKCHIP_SPI_IMAGE=y
>   CONFIG_SPL_SERIAL=y
> -CONFIG_SPL_STACK_R_ADDR=0x600000
>   CONFIG_TARGET_QUARTZ64_RK3566=y
> -CONFIG_SPL_STACK=0x400000
>   CONFIG_DEBUG_UART_BASE=0xFE660000
>   CONFIG_DEBUG_UART_CLOCK=24000000
>   CONFIG_SPL_SPI_FLASH_SUPPORT=y
> @@ -37,12 +29,7 @@ CONFIG_DEFAULT_FDT_FILE="rockchip/rk3566-quartz64-a.dtb"
>   CONFIG_DISPLAY_BOARDINFO_LATE=y
>   CONFIG_SPL_MAX_SIZE=0x40000
>   CONFIG_SPL_PAD_TO=0x7f8000
> -CONFIG_SPL_HAS_BSS_LINKER_SECTION=y
> -CONFIG_SPL_BSS_START_ADDR=0x4000000
> -CONFIG_SPL_BSS_MAX_SIZE=0x4000
>   # CONFIG_SPL_RAW_IMAGE_SUPPORT is not set
> -# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set
> -CONFIG_SPL_STACK_R=y
>   CONFIG_SPL_POWER=y
>   CONFIG_SPL_SPI_LOAD=y
>   CONFIG_SYS_SPI_U_BOOT_OFFS=0x60000
> diff --git a/configs/quartz64-b-rk3566_defconfig b/configs/quartz64-b-rk3566_defconfig
> index 8d01db54407d..bb541ed1af63 100644
> --- a/configs/quartz64-b-rk3566_defconfig
> +++ b/configs/quartz64-b-rk3566_defconfig
> @@ -2,22 +2,14 @@ CONFIG_ARM=y
>   CONFIG_SKIP_LOWLEVEL_INIT=y
>   CONFIG_COUNTER_FREQUENCY=24000000
>   CONFIG_ARCH_ROCKCHIP=y
> -CONFIG_TEXT_BASE=0x00a00000
> -CONFIG_SPL_LIBCOMMON_SUPPORT=y
> -CONFIG_SPL_LIBGENERIC_SUPPORT=y
>   CONFIG_NR_DRAM_BANKS=2
> -CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
> -CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0xc00000
>   CONFIG_SF_DEFAULT_SPEED=24000000
>   CONFIG_SF_DEFAULT_MODE=0x2000
>   CONFIG_DEFAULT_DEVICE_TREE="rk3566-quartz64-b"
>   CONFIG_ROCKCHIP_RK3568=y
> -CONFIG_SPL_ROCKCHIP_COMMON_BOARD=y
>   CONFIG_ROCKCHIP_SPI_IMAGE=y
>   CONFIG_SPL_SERIAL=y
> -CONFIG_SPL_STACK_R_ADDR=0x600000
>   CONFIG_TARGET_QUARTZ64_RK3566=y
> -CONFIG_SPL_STACK=0x400000
>   CONFIG_DEBUG_UART_BASE=0xFE660000
>   CONFIG_DEBUG_UART_CLOCK=24000000
>   CONFIG_SPL_SPI_FLASH_SUPPORT=y
> @@ -36,12 +28,7 @@ CONFIG_DEFAULT_FDT_FILE="rockchip/rk3566-quartz64-b.dtb"
>   CONFIG_DISPLAY_BOARDINFO_LATE=y
>   CONFIG_SPL_MAX_SIZE=0x40000
>   CONFIG_SPL_PAD_TO=0x7f8000
> -CONFIG_SPL_HAS_BSS_LINKER_SECTION=y
> -CONFIG_SPL_BSS_START_ADDR=0x4000000
> -CONFIG_SPL_BSS_MAX_SIZE=0x4000
>   # CONFIG_SPL_RAW_IMAGE_SUPPORT is not set
> -# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set
> -CONFIG_SPL_STACK_R=y
>   CONFIG_SPL_SPI_LOAD=y
>   CONFIG_SYS_SPI_U_BOOT_OFFS=0x60000
>   CONFIG_SPL_ATF=y
> diff --git a/configs/radxa-cm3-io-rk3566_defconfig b/configs/radxa-cm3-io-rk3566_defconfig
> index 4b606dcb8e94..bf61db44d3a4 100644
> --- a/configs/radxa-cm3-io-rk3566_defconfig
> +++ b/configs/radxa-cm3-io-rk3566_defconfig
> @@ -2,18 +2,10 @@ CONFIG_ARM=y
>   CONFIG_SKIP_LOWLEVEL_INIT=y
>   CONFIG_COUNTER_FREQUENCY=24000000
>   CONFIG_ARCH_ROCKCHIP=y
> -CONFIG_TEXT_BASE=0x00a00000
> -CONFIG_SPL_LIBCOMMON_SUPPORT=y
> -CONFIG_SPL_LIBGENERIC_SUPPORT=y
>   CONFIG_NR_DRAM_BANKS=2
> -CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
> -CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0xc00000
>   CONFIG_DEFAULT_DEVICE_TREE="rk3566-radxa-cm3-io"
>   CONFIG_ROCKCHIP_RK3568=y
> -CONFIG_SPL_ROCKCHIP_COMMON_BOARD=y
>   CONFIG_SPL_SERIAL=y
> -CONFIG_SPL_STACK_R_ADDR=0x600000
> -CONFIG_SPL_STACK=0x400000
>   CONFIG_DEBUG_UART_BASE=0xFE660000
>   CONFIG_DEBUG_UART_CLOCK=24000000
>   CONFIG_SYS_LOAD_ADDR=0xc00800
> @@ -28,12 +20,7 @@ CONFIG_DEFAULT_FDT_FILE="rockchip/rk3566-radxa-cm3-io.dtb"
>   CONFIG_DISPLAY_BOARDINFO_LATE=y
>   CONFIG_SPL_MAX_SIZE=0x40000
>   CONFIG_SPL_PAD_TO=0x7f8000
> -CONFIG_SPL_HAS_BSS_LINKER_SECTION=y
> -CONFIG_SPL_BSS_START_ADDR=0x4000000
> -CONFIG_SPL_BSS_MAX_SIZE=0x4000
>   # CONFIG_SPL_RAW_IMAGE_SUPPORT is not set
> -# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set
> -CONFIG_SPL_STACK_R=y
>   CONFIG_SPL_ATF=y
>   CONFIG_CMD_GPIO=y
>   CONFIG_CMD_GPT=y
> diff --git a/configs/radxa-e25-rk3568_defconfig b/configs/radxa-e25-rk3568_defconfig
> index fedb137877ab..43aa8ec20e48 100644
> --- a/configs/radxa-e25-rk3568_defconfig
> +++ b/configs/radxa-e25-rk3568_defconfig
> @@ -3,18 +3,10 @@ CONFIG_SKIP_LOWLEVEL_INIT=y
>   CONFIG_SYS_HAS_NONCACHED_MEMORY=y
>   CONFIG_COUNTER_FREQUENCY=24000000
>   CONFIG_ARCH_ROCKCHIP=y
> -CONFIG_TEXT_BASE=0x00a00000
> -CONFIG_SPL_LIBCOMMON_SUPPORT=y
> -CONFIG_SPL_LIBGENERIC_SUPPORT=y
>   CONFIG_NR_DRAM_BANKS=2
> -CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
> -CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0xc00000
>   CONFIG_DEFAULT_DEVICE_TREE="rk3568-radxa-e25"
>   CONFIG_ROCKCHIP_RK3568=y
> -CONFIG_SPL_ROCKCHIP_COMMON_BOARD=y
>   CONFIG_SPL_SERIAL=y
> -CONFIG_SPL_STACK_R_ADDR=0x600000
> -CONFIG_SPL_STACK=0x400000
>   CONFIG_DEBUG_UART_BASE=0xFE660000
>   CONFIG_DEBUG_UART_CLOCK=24000000
>   CONFIG_SYS_LOAD_ADDR=0xc00800
> @@ -31,12 +23,7 @@ CONFIG_DEFAULT_FDT_FILE="rockchip/rk3568-radxa-e25.dtb"
>   CONFIG_DISPLAY_BOARDINFO_LATE=y
>   CONFIG_SPL_MAX_SIZE=0x40000
>   CONFIG_SPL_PAD_TO=0x7f8000
> -CONFIG_SPL_HAS_BSS_LINKER_SECTION=y
> -CONFIG_SPL_BSS_START_ADDR=0x4000000
> -CONFIG_SPL_BSS_MAX_SIZE=0x4000
>   # CONFIG_SPL_RAW_IMAGE_SUPPORT is not set
> -# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set
> -CONFIG_SPL_STACK_R=y
>   CONFIG_SPL_ATF=y
>   CONFIG_CMD_GPIO=y
>   CONFIG_CMD_GPT=y
> diff --git a/configs/rock-3a-rk3568_defconfig b/configs/rock-3a-rk3568_defconfig
> index 18372a570eb7..c161bc974fb0 100644
> --- a/configs/rock-3a-rk3568_defconfig
> +++ b/configs/rock-3a-rk3568_defconfig
> @@ -2,21 +2,13 @@ CONFIG_ARM=y
>   CONFIG_SKIP_LOWLEVEL_INIT=y
>   CONFIG_COUNTER_FREQUENCY=24000000
>   CONFIG_ARCH_ROCKCHIP=y
> -CONFIG_TEXT_BASE=0x00a00000
> -CONFIG_SPL_LIBCOMMON_SUPPORT=y
> -CONFIG_SPL_LIBGENERIC_SUPPORT=y
>   CONFIG_NR_DRAM_BANKS=2
> -CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
> -CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0xc00000
>   CONFIG_SF_DEFAULT_SPEED=24000000
>   CONFIG_SF_DEFAULT_MODE=0x2000
>   CONFIG_DEFAULT_DEVICE_TREE="rk3568-rock-3a"
>   CONFIG_ROCKCHIP_RK3568=y
> -CONFIG_SPL_ROCKCHIP_COMMON_BOARD=y
>   CONFIG_ROCKCHIP_SPI_IMAGE=y
>   CONFIG_SPL_SERIAL=y
> -CONFIG_SPL_STACK_R_ADDR=0x600000
> -CONFIG_SPL_STACK=0x400000
>   CONFIG_DEBUG_UART_BASE=0xFE660000
>   CONFIG_DEBUG_UART_CLOCK=24000000
>   CONFIG_SPL_SPI_FLASH_SUPPORT=y
> @@ -35,12 +27,7 @@ CONFIG_DEFAULT_FDT_FILE="rockchip/rk3568-rock-3a.dtb"
>   CONFIG_DISPLAY_BOARDINFO_LATE=y
>   CONFIG_SPL_MAX_SIZE=0x40000
>   CONFIG_SPL_PAD_TO=0x7f8000
> -CONFIG_SPL_HAS_BSS_LINKER_SECTION=y
> -CONFIG_SPL_BSS_START_ADDR=0x4000000
> -CONFIG_SPL_BSS_MAX_SIZE=0x4000
>   # CONFIG_SPL_RAW_IMAGE_SUPPORT is not set
> -# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set
> -CONFIG_SPL_STACK_R=y
>   CONFIG_SPL_SPI_LOAD=y
>   CONFIG_SYS_SPI_U_BOOT_OFFS=0x60000
>   CONFIG_SPL_ATF=y
> diff --git a/configs/soquartz-blade-rk3566_defconfig b/configs/soquartz-blade-rk3566_defconfig
> index 9693cc2f9eb9..b9ac6b9f33d5 100644
> --- a/configs/soquartz-blade-rk3566_defconfig
> +++ b/configs/soquartz-blade-rk3566_defconfig
> @@ -2,19 +2,11 @@ CONFIG_ARM=y
>   CONFIG_SKIP_LOWLEVEL_INIT=y
>   CONFIG_COUNTER_FREQUENCY=24000000
>   CONFIG_ARCH_ROCKCHIP=y
> -CONFIG_TEXT_BASE=0x00a00000
> -CONFIG_SPL_LIBCOMMON_SUPPORT=y
> -CONFIG_SPL_LIBGENERIC_SUPPORT=y
>   CONFIG_NR_DRAM_BANKS=2
> -CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
> -CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0xc00000
>   CONFIG_DEFAULT_DEVICE_TREE="rk3566-soquartz-blade"
>   CONFIG_ROCKCHIP_RK3568=y
> -CONFIG_SPL_ROCKCHIP_COMMON_BOARD=y
>   CONFIG_SPL_SERIAL=y
> -CONFIG_SPL_STACK_R_ADDR=0x600000
>   CONFIG_TARGET_QUARTZ64_RK3566=y
> -CONFIG_SPL_STACK=0x400000
>   CONFIG_DEBUG_UART_BASE=0xFE660000
>   CONFIG_DEBUG_UART_CLOCK=24000000
>   CONFIG_SYS_LOAD_ADDR=0xc00800
> @@ -31,12 +23,7 @@ CONFIG_DEFAULT_FDT_FILE="rockchip/rk3566-soquartz-blade.dtb"
>   CONFIG_DISPLAY_BOARDINFO_LATE=y
>   CONFIG_SPL_MAX_SIZE=0x40000
>   CONFIG_SPL_PAD_TO=0x7f8000
> -CONFIG_SPL_HAS_BSS_LINKER_SECTION=y
> -CONFIG_SPL_BSS_START_ADDR=0x4000000
> -CONFIG_SPL_BSS_MAX_SIZE=0x4000
>   # CONFIG_SPL_RAW_IMAGE_SUPPORT is not set
> -# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set
> -CONFIG_SPL_STACK_R=y
>   CONFIG_SPL_ATF=y
>   CONFIG_CMD_GPIO=y
>   CONFIG_CMD_GPT=y
> diff --git a/configs/soquartz-cm4-rk3566_defconfig b/configs/soquartz-cm4-rk3566_defconfig
> index 9c6b12d23028..e87a6392c527 100644
> --- a/configs/soquartz-cm4-rk3566_defconfig
> +++ b/configs/soquartz-cm4-rk3566_defconfig
> @@ -2,19 +2,11 @@ CONFIG_ARM=y
>   CONFIG_SKIP_LOWLEVEL_INIT=y
>   CONFIG_COUNTER_FREQUENCY=24000000
>   CONFIG_ARCH_ROCKCHIP=y
> -CONFIG_TEXT_BASE=0x00a00000
> -CONFIG_SPL_LIBCOMMON_SUPPORT=y
> -CONFIG_SPL_LIBGENERIC_SUPPORT=y
>   CONFIG_NR_DRAM_BANKS=2
> -CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
> -CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0xc00000
>   CONFIG_DEFAULT_DEVICE_TREE="rk3566-soquartz-cm4"
>   CONFIG_ROCKCHIP_RK3568=y
> -CONFIG_SPL_ROCKCHIP_COMMON_BOARD=y
>   CONFIG_SPL_SERIAL=y
> -CONFIG_SPL_STACK_R_ADDR=0x600000
>   CONFIG_TARGET_QUARTZ64_RK3566=y
> -CONFIG_SPL_STACK=0x400000
>   CONFIG_DEBUG_UART_BASE=0xFE660000
>   CONFIG_DEBUG_UART_CLOCK=24000000
>   CONFIG_SYS_LOAD_ADDR=0xc00800
> @@ -31,12 +23,7 @@ CONFIG_DEFAULT_FDT_FILE="rockchip/rk3566-soquartz-cm4.dtb"
>   CONFIG_DISPLAY_BOARDINFO_LATE=y
>   CONFIG_SPL_MAX_SIZE=0x40000
>   CONFIG_SPL_PAD_TO=0x7f8000
> -CONFIG_SPL_HAS_BSS_LINKER_SECTION=y
> -CONFIG_SPL_BSS_START_ADDR=0x4000000
> -CONFIG_SPL_BSS_MAX_SIZE=0x4000
>   # CONFIG_SPL_RAW_IMAGE_SUPPORT is not set
> -# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set
> -CONFIG_SPL_STACK_R=y
>   CONFIG_SPL_ATF=y
>   CONFIG_CMD_GPIO=y
>   CONFIG_CMD_GPT=y
> diff --git a/configs/soquartz-model-a-rk3566_defconfig b/configs/soquartz-model-a-rk3566_defconfig
> index fd72d78a47a8..b2c1684515e8 100644
> --- a/configs/soquartz-model-a-rk3566_defconfig
> +++ b/configs/soquartz-model-a-rk3566_defconfig
> @@ -2,19 +2,11 @@ CONFIG_ARM=y
>   CONFIG_SKIP_LOWLEVEL_INIT=y
>   CONFIG_COUNTER_FREQUENCY=24000000
>   CONFIG_ARCH_ROCKCHIP=y
> -CONFIG_TEXT_BASE=0x00a00000
> -CONFIG_SPL_LIBCOMMON_SUPPORT=y
> -CONFIG_SPL_LIBGENERIC_SUPPORT=y
>   CONFIG_NR_DRAM_BANKS=2
> -CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
> -CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0xc00000
>   CONFIG_DEFAULT_DEVICE_TREE="rk3566-soquartz-model-a"
>   CONFIG_ROCKCHIP_RK3568=y
> -CONFIG_SPL_ROCKCHIP_COMMON_BOARD=y
>   CONFIG_SPL_SERIAL=y
> -CONFIG_SPL_STACK_R_ADDR=0x600000
>   CONFIG_TARGET_QUARTZ64_RK3566=y
> -CONFIG_SPL_STACK=0x400000
>   CONFIG_DEBUG_UART_BASE=0xFE660000
>   CONFIG_DEBUG_UART_CLOCK=24000000
>   CONFIG_SYS_LOAD_ADDR=0xc00800
> @@ -31,12 +23,7 @@ CONFIG_DEFAULT_FDT_FILE="rockchip/rk3566-soquartz-model-a.dtb"
>   CONFIG_DISPLAY_BOARDINFO_LATE=y
>   CONFIG_SPL_MAX_SIZE=0x40000
>   CONFIG_SPL_PAD_TO=0x7f8000
> -CONFIG_SPL_HAS_BSS_LINKER_SECTION=y
> -CONFIG_SPL_BSS_START_ADDR=0x4000000
> -CONFIG_SPL_BSS_MAX_SIZE=0x4000
>   # CONFIG_SPL_RAW_IMAGE_SUPPORT is not set
> -# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set
> -CONFIG_SPL_STACK_R=y
>   CONFIG_SPL_ATF=y
>   CONFIG_CMD_GPIO=y
>   CONFIG_CMD_GPT=y


More information about the U-Boot mailing list