[PATCH v4 15/20] rockchip: rk3588: bind MMC controllers in U-Boot proper pre-reloc

[Quentin Schulz]

From: Quentin Schulz <quentin.schulz at theobroma-systems.com>

Since commit 9e644284ab81 ("dm: core: Report bootph-pre-ram/sram node as
pre-reloc after relocation"), bootph-pre-ram doesn't make U-Boot proper
bind the device before relocation.

While this is usually not much of an issue, it is when there's a lookup
for devices by code running before the relocation. Such is the case of
env_init() which calls env_driver_lookup() which calls
env_get_location() which is a weak symbol and may call
arch_env_get_location() also a weak symbol. Those are two functions that
may traverse UCLASS to find some devices (e.g.
board/theobroma-systems/common/common.c:arch_env_get_location()).

This allows something in the env_init() call stack to be able to use
uclasses for SD and eMMC controller on RK3588S/RK3588. This aligns the
behavior with what seems to be all SoCs except RK356x family.

Additionally, if any other env function (e.g. env_load) were to be used
before relocation, this is also required as otherwise it wouldn't be
able to find the MMC device(s).

Cc: Quentin Schulz <foss+uboot at 0leil.net>
Reviewed-by: Kever Yang <kever.yang at rock-chips.com>
Signed-off-by: Quentin Schulz <quentin.schulz at theobroma-systems.com>
---
 arch/arm/dts/rk3588s-u-boot.dtsi | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/arch/arm/dts/rk3588s-u-boot.dtsi b/arch/arm/dts/rk3588s-u-boot.dtsi
index bf3b1ea8a3c..ac67c777ade 100644
--- a/arch/arm/dts/rk3588s-u-boot.dtsi
+++ b/arch/arm/dts/rk3588s-u-boot.dtsi
@@ -188,11 +188,13 @@
 
 &sdmmc {
 	bootph-pre-ram;
+	bootph-some-ram;
 	u-boot,spl-fifo-mode;
 };
 
 &sdhci {
 	bootph-pre-ram;
+	bootph-some-ram;
 	u-boot,spl-fifo-mode;
 };
 

-- 
2.44.0