[PATCH v3 0/4]

[Volodymyr Babchuk]

Set of pre-req patches for Qualcomm SA8155P-ADP board support.

This path series consist of generic qcom changes that may benefit
different boards. It is the part of the bigger series that adds
SA8155P-ADP support, but I am posting this limited set because there
are other developers who depend on those changes and I am not ready to
post other patches of the bigger series.


Changes in v3:
 - Replaced fdt_valid() with fdt_check_header()
 - Added "depends POWER_DOMAIN" to Kconfig (see note)
 - Use readl_poll_timeout() instead of open coded wait loop
 - Print warning if power domain can't be enabled/disabled

Changes in v2:
 - New patch in v2
 - Reworked qcom_cc_bind() function
 - Added timeout to qcom_power_set()
 - Minor fixes in register names and formatting

Volodymyr Babchuk (4):
  qcom: board: validate fdt before trying to use it
  clk: qcom: clear div mask before assigning a new divider
  clk: qcom: add support for power domains uclass
  pinctrl: qcom: pass pin number to get_function_mux callback

 arch/arm/mach-snapdragon/board.c       |   5 +-
 drivers/clk/qcom/Kconfig               |   2 +-
 drivers/clk/qcom/clock-qcom.c          | 135 ++++++++++++++++++++++---
 drivers/clk/qcom/clock-qcom.h          |   6 ++
 drivers/pinctrl/qcom/pinctrl-apq8016.c |   3 +-
 drivers/pinctrl/qcom/pinctrl-apq8096.c |   3 +-
 drivers/pinctrl/qcom/pinctrl-ipq4019.c |   3 +-
 drivers/pinctrl/qcom/pinctrl-qcom.c    |   4 +-
 drivers/pinctrl/qcom/pinctrl-qcom.h    |   3 +-
 drivers/pinctrl/qcom/pinctrl-qcs404.c  |   3 +-
 drivers/pinctrl/qcom/pinctrl-sdm845.c  |   3 +-
 11 files changed, 146 insertions(+), 24 deletions(-)

-- 
2.43.0