[PATCH v3 10/11] imx8mp_venice_defconfig: Enable PCIe/NVMe support

Sumit Garg sumit.garg at linaro.org
Tue Mar 12 08:03:37 CET 2024


From: Tim Harvey <tharvey at gateworks.com>

Enable PCIe/NVMe support. Also, enable the reset, regmap and syscon
drivers which are a prerequisite for PCIe support.

Signed-off-by: Tim Harvey <tharvey at gateworks.com>
---
 configs/imx8mp_venice_defconfig | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/configs/imx8mp_venice_defconfig b/configs/imx8mp_venice_defconfig
index 11b356b7785..ff7ea9811ed 100644
--- a/configs/imx8mp_venice_defconfig
+++ b/configs/imx8mp_venice_defconfig
@@ -12,6 +12,7 @@ CONFIG_DEFAULT_DEVICE_TREE="imx8mp-venice"
 CONFIG_SPL_TEXT_BASE=0x920000
 CONFIG_TARGET_IMX8MP_VENICE=y
 CONFIG_OF_LIBFDT_OVERLAY=y
+CONFIG_DM_RESET=y
 CONFIG_SYS_MONITOR_LEN=524288
 CONFIG_SPL_MMC=y
 CONFIG_SPL_SERIAL=y
@@ -21,6 +22,7 @@ CONFIG_SPL=y
 CONFIG_ENV_OFFSET_REDUND=0x3f8000
 CONFIG_SPL_IMX_ROMAPI_LOADADDR=0x48000000
 CONFIG_SYS_LOAD_ADDR=0x40480000
+CONFIG_PCI=y
 CONFIG_SYS_MEMTEST_START=0x40000000
 CONFIG_SYS_MEMTEST_END=0x80000000
 CONFIG_LTO=y
@@ -65,6 +67,7 @@ CONFIG_CMD_FUSE=y
 CONFIG_CMD_GPIO=y
 CONFIG_CMD_I2C=y
 CONFIG_CMD_MMC=y
+CONFIG_CMD_PCI=y
 CONFIG_CMD_USB=y
 CONFIG_SYS_DISABLE_AUTOLOAD=y
 CONFIG_CMD_CACHE=y
@@ -86,6 +89,8 @@ CONFIG_NET_RANDOM_ETHADDR=y
 CONFIG_IP_DEFRAG=y
 CONFIG_TFTP_BLOCKSIZE=4096
 CONFIG_SPL_DM=y
+CONFIG_REGMAP=y
+CONFIG_SYSCON=y
 CONFIG_CLK_COMPOSITE_CCF=y
 CONFIG_CLK_IMX8MP=y
 CONFIG_GPIO_HOG=y
@@ -114,7 +119,10 @@ CONFIG_FEC_MXC=y
 CONFIG_KSZ9477=y
 CONFIG_RGMII=y
 CONFIG_MII=y
+CONFIG_NVME_PCI=y
+CONFIG_PCIE_DW_IMX=y
 CONFIG_PHY_IMX8MQ_USB=y
+CONFIG_PHY_IMX8M_PCIE=y
 CONFIG_PINCTRL=y
 CONFIG_SPL_PINCTRL=y
 CONFIG_PINCTRL_IMX8M=y
-- 
2.34.1



More information about the U-Boot mailing list