[PATCH] xilinx: versal-net: Add support for saving env based on bootmode

[Venkatesh Yadav Abbarapu]

Enable saving variables to MMC(FAT) and SPI based on primary
bootmode. If bootmode is JTAG, dont save env anywhere(NOWHERE).

Enable ENV_FAT_DEVICE_AND_PART="0:auto" for versal-net platform as well.

Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu at amd.com>
---
 board/xilinx/versal-net/board.c          | 30 ++++++++++++++++++++++++
 configs/xilinx_versal_net_virt_defconfig |  3 +++
 env/Kconfig                              |  2 +-
 3 files changed, 34 insertions(+), 1 deletion(-)

diff --git a/board/xilinx/versal-net/board.c b/board/xilinx/versal-net/board.c
index 990ca1650a..aecaeb6574 100644
--- a/board/xilinx/versal-net/board.c
+++ b/board/xilinx/versal-net/board.c
@@ -371,3 +371,33 @@ int dram_init(void)
 void reset_cpu(void)
 {
 }
+
+enum env_location env_get_location(enum env_operation op, int prio)
+{
+	u8 bootmode = versal_net_get_bootmode();
+
+	if (prio)
+		return ENVL_UNKNOWN;
+
+	switch (bootmode) {
+	case EMMC_MODE:
+	case SD_MODE:
+	case SD1_LSHFT_MODE:
+	case SD_MODE1:
+		if (IS_ENABLED(CONFIG_ENV_IS_IN_FAT))
+			return ENVL_FAT;
+		if (IS_ENABLED(CONFIG_ENV_IS_IN_EXT4))
+			return ENVL_EXT4;
+		return ENVL_NOWHERE;
+	case OSPI_MODE:
+	case QSPI_MODE_24BIT:
+	case QSPI_MODE_32BIT:
+		if (IS_ENABLED(CONFIG_ENV_IS_IN_SPI_FLASH))
+			return ENVL_SPI_FLASH;
+		return ENVL_NOWHERE;
+	case JTAG_MODE:
+	case SELECTMAP_MODE:
+	default:
+		return ENVL_NOWHERE;
+	}
+}
diff --git a/configs/xilinx_versal_net_virt_defconfig b/configs/xilinx_versal_net_virt_defconfig
index 29cebe2713..40c6a29a16 100644
--- a/configs/xilinx_versal_net_virt_defconfig
+++ b/configs/xilinx_versal_net_virt_defconfig
@@ -60,6 +60,9 @@ CONFIG_PARTITION_TYPE_GUID=y
 CONFIG_OF_BOARD=y
 CONFIG_DTB_RESELECT=y
 CONFIG_MULTI_DTB_FIT=y
+CONFIG_ENV_IS_NOWHERE=y
+CONFIG_ENV_IS_IN_FAT=y
+CONFIG_ENV_IS_IN_SPI_FLASH=y
 CONFIG_SYS_REDUNDAND_ENVIRONMENT=y
 CONFIG_SYS_RELOC_GD_ENV_ADDR=y
 CONFIG_NET_RANDOM_ETHADDR=y
diff --git a/env/Kconfig b/env/Kconfig
index 7885c8bf83..1f8e90af55 100644
--- a/env/Kconfig
+++ b/env/Kconfig
@@ -472,7 +472,7 @@ config ENV_FAT_DEVICE_AND_PART
 	string "Device and partition for where to store the environemt in FAT"
 	depends on ENV_IS_IN_FAT
 	default "0:1" if TI_COMMON_CMD_OPTIONS
-	default "0:auto" if ARCH_ZYNQ || ARCH_ZYNQMP || ARCH_VERSAL
+	default "0:auto" if ARCH_ZYNQ || ARCH_ZYNQMP || ARCH_VERSAL || ARCH_VERSAL_NET
 	default ":auto" if ARCH_SUNXI
 	default "0" if ARCH_AT91
 	help
-- 
2.17.1