[PATCH v2 2/5] phycore_imx8mp: Move default bootcmd to board env
Teresa Remmet
T.Remmet at phytec.de
Tue Mar 12 15:14:27 CET 2024
Am Dienstag, dem 12.03.2024 um 09:59 +0100 schrieb Leonard Anderweit:
> Move the default bootcmd from the defconfig to the board environment.
> No change in functionality.
>
> Signed-off-by: Leonard Anderweit <l.anderweit at phytec.de>
Tested-by: Teresa Remmet <t.remmet at phytec.de>
> ---
> board/phytec/phycore_imx8mp/phycore_imx8mp.env | 12 ++++++++++++
> configs/phycore-imx8mp_defconfig | 2 --
> 2 files changed, 12 insertions(+), 2 deletions(-)
>
> diff --git a/board/phytec/phycore_imx8mp/phycore_imx8mp.env
> b/board/phytec/phycore_imx8mp/phycore_imx8mp.env
> index 6d15b7f3dc9f..73202c3b129a 100644
> --- a/board/phytec/phycore_imx8mp/phycore_imx8mp.env
> +++ b/board/phytec/phycore_imx8mp/phycore_imx8mp.env
> @@ -1,3 +1,15 @@
> +bootcmd=
> + if test ${dofastboot} = 1; then
> + fastboot 0;
> + fi;
> + mmc dev ${mmcdev};
> + if mmc rescan; then
> + if run loadimage; then
> + run mmcboot;
> + else
> + run netboot;
> + fi;
> + fi;
> console=ttymxc0,115200
> dofastboot=0
> emmc_dev=2
> diff --git a/configs/phycore-imx8mp_defconfig b/configs/phycore-
> imx8mp_defconfig
> index b3a7bbd79bb6..fd492eba3c10 100644
> --- a/configs/phycore-imx8mp_defconfig
> +++ b/configs/phycore-imx8mp_defconfig
> @@ -25,8 +25,6 @@ CONFIG_FIT=y
> CONFIG_FIT_EXTERNAL_OFFSET=0x3000
> CONFIG_SPL_LOAD_FIT=y
> CONFIG_OF_SYSTEM_SETUP=y
> -CONFIG_USE_BOOTCOMMAND=y
> -CONFIG_BOOTCOMMAND="if test ${dofastboot} = 1; then fastboot 0; fi;
> mmc dev ${mmcdev}; if mmc rescan; then if run loadimage; then run
> mmcboot; else run netboot; fi; fi;"
> CONFIG_DEFAULT_FDT_FILE="oftree"
> CONFIG_SYS_CBSIZE=2048
> CONFIG_SYS_PBSIZE=2074
--
PHYTEC Messtechnik GmbH | Barcelona-Allee 1 | 55129 Mainz, Germany
Geschäftsführer: Dipl.-Ing. Michael Mitezki, Dipl.-Ing. Bodo Huber,
Dipl.-Ing. (FH) Markus Lickes | Handelsregister Mainz HRB 4656 |
Finanzamt Mainz | St.Nr. 266500608, DE 149059855
More information about the U-Boot
mailing list