[PATCH v2 10/12] rockchip: theobroma-systems: puma: Migrate to use IO-domain driver

Jonas Karlman jonas at kwiboo.se
Wed Mar 13 00:36:20 CET 2024


Switch to use the IO-domain driver to configure IO-domain based on
device tree instead of a setup_iodomain() function.

Signed-off-by: Jonas Karlman <jonas at kwiboo.se>
Reviewed-by: Kever Yang <kever.yang at rock-chips.com>
---
v2:
- Collect r-b tag
---
 .../puma_rk3399/puma-rk3399.c                 | 21 -------------------
 configs/puma-rk3399_defconfig                 |  1 +
 2 files changed, 1 insertion(+), 21 deletions(-)

diff --git a/board/theobroma-systems/puma_rk3399/puma-rk3399.c b/board/theobroma-systems/puma_rk3399/puma-rk3399.c
index 8b998ef45565..eeb8a99231e4 100644
--- a/board/theobroma-systems/puma_rk3399/puma-rk3399.c
+++ b/board/theobroma-systems/puma_rk3399/puma-rk3399.c
@@ -3,31 +3,10 @@
  * (C) Copyright 2017 Theobroma Systems Design und Consulting GmbH
  */
 
-#include <dm.h>
-#include <syscon.h>
-#include <dm/pinctrl.h>
-#include <asm/arch-rockchip/clock.h>
-#include <asm/arch-rockchip/hardware.h>
-#include <asm/arch-rockchip/grf_rk3399.h>
 #include "../common/common.h"
 
-static void setup_iodomain(void)
-{
-	const u32 GRF_IO_VSEL_GPIO4CD_SHIFT = 3;
-	struct rk3399_grf_regs *grf =
-	    syscon_get_first_range(ROCKCHIP_SYSCON_GRF);
-
-	/*
-	 * Set bit 3 in GRF_IO_VSEL so PCIE_RST# works (pin GPIO4_C6).
-	 * Linux assumes that PCIE_RST# works out of the box as it probes
-	 * PCIe before loading the iodomain driver.
-	 */
-	rk_setreg(&grf->io_vsel, 1 << GRF_IO_VSEL_GPIO4CD_SHIFT);
-}
-
 int rockchip_early_misc_init_r(void)
 {
-	setup_iodomain();
 	setup_boottargets();
 
 	return 0;
diff --git a/configs/puma-rk3399_defconfig b/configs/puma-rk3399_defconfig
index 7e76ec5076f9..c2759e1a9520 100644
--- a/configs/puma-rk3399_defconfig
+++ b/configs/puma-rk3399_defconfig
@@ -66,6 +66,7 @@ CONFIG_GPIO_HOG=y
 CONFIG_SPL_GPIO_HOG=y
 CONFIG_ROCKCHIP_GPIO=y
 CONFIG_SYS_I2C_ROCKCHIP=y
+CONFIG_ROCKCHIP_IODOMAIN=y
 CONFIG_MMC_DW=y
 CONFIG_MMC_DW_ROCKCHIP=y
 CONFIG_MMC_SDHCI=y
-- 
2.43.2



More information about the U-Boot mailing list