[PATCH v2 1/4] rockchip: Update the default USB Product ID value

[Kever Yang]

On 2024/3/11 02:50, Jonas Karlman wrote:
> RK3036 is using the USB product id normally used by RK3066B, and RK3328
> is using the product id normally used by RK3368.
>
> Fix this and update the default USB_GADGET_PRODUCT_NUM Kconfig option
> for remaining supported Rockchip SoCs to match the product id used in
> Maskrom mode.
>
> Also remove a reference to an undefined ROCKCHIP_RK3229 Kconfig symbol.
>
> Signed-off-by: Jonas Karlman <jonas at kwiboo.se>
Reviewed-by: Kever Yang <kever.yang at rock-chips.com>

Thanks,
- Kever
> ---
> v2:
> - Update commit message
> ---
>   drivers/usb/gadget/Kconfig | 15 ++++++++++++---
>   1 file changed, 12 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/usb/gadget/Kconfig b/drivers/usb/gadget/Kconfig
> index c72a8047635c..4621a6fd5e64 100644
> --- a/drivers/usb/gadget/Kconfig
> +++ b/drivers/usb/gadget/Kconfig
> @@ -70,12 +70,21 @@ config USB_GADGET_PRODUCT_NUM
>   	hex "Product ID of the USB device"
>   	default 0x701a if ARCH_TEGRA
>   	default 0x1010 if ARCH_SUNXI
> -	default 0x310a if ROCKCHIP_RK3036
> +	default 0x110a if ROCKCHIP_RV1108
> +	default 0x110b if ROCKCHIP_RV1126
>   	default 0x300a if ROCKCHIP_RK3066
> +	default 0x301a if ROCKCHIP_RK3036
> +	default 0x310b if ROCKCHIP_RK3188
>   	default 0x310c if ROCKCHIP_RK3128
> -	default 0x320a if ROCKCHIP_RK3229 || ROCKCHIP_RK3288
> -	default 0x330a if ROCKCHIP_RK3328
> +	default 0x320a if ROCKCHIP_RK3288
> +	default 0x320b if ROCKCHIP_RK322X
> +	default 0x320c if ROCKCHIP_RK3328
> +	default 0x330a if ROCKCHIP_RK3368
>   	default 0x330c if ROCKCHIP_RK3399
> +	default 0x330d if ROCKCHIP_PX30
> +	default 0x330e if ROCKCHIP_RK3308
> +	default 0x350a if ROCKCHIP_RK3568
> +	default 0x350b if ROCKCHIP_RK3588
>   	default 0x0
>   	help
>   	  Product ID of the USB device emulated, reported to the host device.