[PATCH v2 4/4] rockchip: Migrate to use DM_USB_GADGET on RK3328
Kever Yang
kever.yang at rock-chips.com
Wed Mar 13 11:45:01 CET 2024
Hi Jonas,
Again, not able to apply changes for rk3328 defconfig.
Thanks,
- Kever
On 2024/3/11 02:51, Jonas Karlman wrote:
> USB gadget is not working fully as expected on RK3328, it uses a
> board_usb_init() function to initialize the DWC2 OTG port.
>
> The board_usb_init() function does not intgrate with the generic phy
> framework and as a result the USB phy is not properly configured before
> or after USB gadget use.
>
> Having both USB_DWC2 and DWC2_OTG enabled for the same board is also
> causing some issues.
>
> Trying to use rockusb or ums command after usb stop result in a freeze
> due to usb stop is putting the phy in a suspended state.
>
> => usb start
> => usb stop
> => ums 0 mmc 0
> --> freeze due to usb phy is suspended <--
>
> Fix this by only using one of USB_DWC2 (host) or DWC2_OTG (peripheral)
> depending on the most likely usage of the otg port and by migrating to
> use DM_USB_GADGET instead of a board_usb_init() function.
>
> The nanopi-r2 and orangepi-r1-plus variants share OTG and power using a
> Type-C connector, mark these boards dr_mode as peripheral, the most
> likely usage is for recovery and image download.
>
> The rock64 and roc-cc currently use dr_mode as host, remove the DWC2_OTG
> driver from these boards to ensure that the USB_DWC2 driver is used.
>
> The rock-pi-e board does not enable the usb20_otg node so both USB_DWC2
> and DWC2_OTG is removed from this board.
>
> Enable RockUSB and UMS on all boards with a otg port in peripheral mode.
>
> Also with the migration to DM_USB_GADGET completed the U-Boot specific
> change to reorder usb nodes in the soc device tree can be reverted.
>
> Signed-off-by: Jonas Karlman <jonas at kwiboo.se>
> Reviewed-by: Kever Yang <kever.yang at rock-chips.com>
> ---
> v2:
> - Drop use of DWC3_GENERIC and revert to use XHCI_DWC3 for USB 3.0 host
> for devices using another port with otg/peripheral dr_mode to work
> around build errors when mixing DWC3_GENERIC and DWC2_OTG.
> - Collect r-b tag
> ---
> arch/arm/dts/rk3328-nanopi-r2s-u-boot.dtsi | 4 ++
> .../rk3328-orangepi-r1-plus-lts-u-boot.dtsi | 4 ++
> .../dts/rk3328-orangepi-r1-plus-u-boot.dtsi | 4 ++
> arch/arm/dts/rk3328-roc-cc-u-boot.dtsi | 4 ++
> arch/arm/dts/rk3328-rock-pi-e-u-boot.dtsi | 9 ++++
> arch/arm/dts/rk3328-rock64-u-boot.dtsi | 4 ++
> arch/arm/dts/rk3328-u-boot.dtsi | 4 --
> arch/arm/dts/rk3328.dtsi | 41 ++++++++-----------
> configs/evb-rk3328_defconfig | 7 +++-
> configs/nanopi-r2c-plus-rk3328_defconfig | 7 +++-
> configs/nanopi-r2c-rk3328_defconfig | 7 +++-
> configs/nanopi-r2s-rk3328_defconfig | 7 +++-
> configs/orangepi-r1-plus-lts-rk3328_defconfig | 7 +++-
> configs/orangepi-r1-plus-rk3328_defconfig | 7 +++-
> configs/roc-cc-rk3328_defconfig | 7 ----
> configs/rock-pi-e-rk3328_defconfig | 7 ----
> configs/rock64-rk3328_defconfig | 6 ---
> 17 files changed, 75 insertions(+), 61 deletions(-)
>
> diff --git a/arch/arm/dts/rk3328-nanopi-r2s-u-boot.dtsi b/arch/arm/dts/rk3328-nanopi-r2s-u-boot.dtsi
> index cca4f06145cf..4fa170eeaf8d 100644
> --- a/arch/arm/dts/rk3328-nanopi-r2s-u-boot.dtsi
> +++ b/arch/arm/dts/rk3328-nanopi-r2s-u-boot.dtsi
> @@ -15,6 +15,10 @@
> bootph-all;
> };
>
> +&usb20_otg {
> + dr_mode = "peripheral";
> +};
> +
> &vcc_io_sdio {
> bootph-pre-ram;
> };
> diff --git a/arch/arm/dts/rk3328-orangepi-r1-plus-lts-u-boot.dtsi b/arch/arm/dts/rk3328-orangepi-r1-plus-lts-u-boot.dtsi
> index 0dbe5a01f986..0a9423cd9c7e 100644
> --- a/arch/arm/dts/rk3328-orangepi-r1-plus-lts-u-boot.dtsi
> +++ b/arch/arm/dts/rk3328-orangepi-r1-plus-lts-u-boot.dtsi
> @@ -33,6 +33,10 @@
> bootph-pre-ram;
> };
>
> +&usb20_otg {
> + dr_mode = "peripheral";
> +};
> +
> &vcc_sd {
> bootph-pre-ram;
> };
> diff --git a/arch/arm/dts/rk3328-orangepi-r1-plus-u-boot.dtsi b/arch/arm/dts/rk3328-orangepi-r1-plus-u-boot.dtsi
> index 1af75ada1a62..1096821fc5d3 100644
> --- a/arch/arm/dts/rk3328-orangepi-r1-plus-u-boot.dtsi
> +++ b/arch/arm/dts/rk3328-orangepi-r1-plus-u-boot.dtsi
> @@ -33,6 +33,10 @@
> bootph-pre-ram;
> };
>
> +&usb20_otg {
> + dr_mode = "peripheral";
> +};
> +
> &vcc_sd {
> bootph-pre-ram;
> };
> diff --git a/arch/arm/dts/rk3328-roc-cc-u-boot.dtsi b/arch/arm/dts/rk3328-roc-cc-u-boot.dtsi
> index 47d74964fd0c..582d6ba49b4e 100644
> --- a/arch/arm/dts/rk3328-roc-cc-u-boot.dtsi
> +++ b/arch/arm/dts/rk3328-roc-cc-u-boot.dtsi
> @@ -29,6 +29,10 @@
> };
> };
>
> +&usb20_otg {
> + hnp-srp-disable;
> +};
> +
> &vcc_sd {
> bootph-pre-ram;
> };
> diff --git a/arch/arm/dts/rk3328-rock-pi-e-u-boot.dtsi b/arch/arm/dts/rk3328-rock-pi-e-u-boot.dtsi
> index 9ed0aef1ecc9..d314bfad6fc0 100644
> --- a/arch/arm/dts/rk3328-rock-pi-e-u-boot.dtsi
> +++ b/arch/arm/dts/rk3328-rock-pi-e-u-boot.dtsi
> @@ -29,6 +29,15 @@
> };
> };
>
> +&u2phy_host {
> + phy-supply = <&vcc_host_5v>;
> +};
> +
> +&vcc_host_5v {
> + /delete-property/ regulator-always-on;
> + /delete-property/ regulator-boot-on;
> +};
> +
> &vcc_sd {
> bootph-pre-ram;
> };
> diff --git a/arch/arm/dts/rk3328-rock64-u-boot.dtsi b/arch/arm/dts/rk3328-rock64-u-boot.dtsi
> index 85426495c3d8..551cff6f24f6 100644
> --- a/arch/arm/dts/rk3328-rock64-u-boot.dtsi
> +++ b/arch/arm/dts/rk3328-rock64-u-boot.dtsi
> @@ -55,6 +55,10 @@
> bootph-pre-ram;
> };
>
> +&usb20_otg {
> + hnp-srp-disable;
> +};
> +
> &vcc_sd {
> bootph-pre-ram;
> };
> diff --git a/arch/arm/dts/rk3328-u-boot.dtsi b/arch/arm/dts/rk3328-u-boot.dtsi
> index 4d43fe2fb51a..e0c6aee58aba 100644
> --- a/arch/arm/dts/rk3328-u-boot.dtsi
> +++ b/arch/arm/dts/rk3328-u-boot.dtsi
> @@ -130,10 +130,6 @@
> bootph-all;
> };
>
> -&usb20_otg {
> - hnp-srp-disable;
> -};
> -
> #ifdef CONFIG_ROCKCHIP_SPI_IMAGE
> &binman {
> simple-bin-spi {
> diff --git a/arch/arm/dts/rk3328.dtsi b/arch/arm/dts/rk3328.dtsi
> index fe81b97bbe78..fb5dcf6e9327 100644
> --- a/arch/arm/dts/rk3328.dtsi
> +++ b/arch/arm/dts/rk3328.dtsi
> @@ -965,6 +965,22 @@
> };
> };
>
> + usb20_otg: usb at ff580000 {
> + compatible = "rockchip,rk3328-usb", "rockchip,rk3066-usb",
> + "snps,dwc2";
> + reg = <0x0 0xff580000 0x0 0x40000>;
> + interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&cru HCLK_OTG>;
> + clock-names = "otg";
> + dr_mode = "otg";
> + g-np-tx-fifo-size = <16>;
> + g-rx-fifo-size = <280>;
> + g-tx-fifo-size = <256 128 128 64 32 16>;
> + phys = <&u2phy_otg>;
> + phy-names = "usb2-phy";
> + status = "disabled";
> + };
> +
> usb_host0_ehci: usb at ff5c0000 {
> compatible = "generic-ehci";
> reg = <0x0 0xff5c0000 0x0 0x10000>;
> @@ -1004,31 +1020,6 @@
> status = "disabled";
> };
>
> - /*
> - * U-Boot Specific Change
> - *
> - * The OTG controller must come after the USB host pair for it
> - * to work. This is likely due to lack of support for the USB
> - * PHYs. This must be manually changed after each device tree
> - * sync. There is no clean way to handle this in -u-boot.dtsi
> - * files.
> - */
> - usb20_otg: usb at ff580000 {
> - compatible = "rockchip,rk3328-usb", "rockchip,rk3066-usb",
> - "snps,dwc2";
> - reg = <0x0 0xff580000 0x0 0x40000>;
> - interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
> - clocks = <&cru HCLK_OTG>;
> - clock-names = "otg";
> - dr_mode = "otg";
> - g-np-tx-fifo-size = <16>;
> - g-rx-fifo-size = <280>;
> - g-tx-fifo-size = <256 128 128 64 32 16>;
> - phys = <&u2phy_otg>;
> - phy-names = "usb2-phy";
> - status = "disabled";
> - };
> -
> gic: interrupt-controller at ff811000 {
> compatible = "arm,gic-400";
> #interrupt-cells = <3>;
> diff --git a/configs/evb-rk3328_defconfig b/configs/evb-rk3328_defconfig
> index 4fa8a7d365a4..75a0e0f286bd 100644
> --- a/configs/evb-rk3328_defconfig
> +++ b/configs/evb-rk3328_defconfig
> @@ -31,6 +31,8 @@ CONFIG_CMD_GPIO=y
> CONFIG_CMD_GPT=y
> CONFIG_CMD_MMC=y
> CONFIG_CMD_USB=y
> +CONFIG_CMD_ROCKUSB=y
> +CONFIG_CMD_USB_MASS_STORAGE=y
> # CONFIG_CMD_SETEXPR is not set
> CONFIG_CMD_TIME=y
> CONFIG_CMD_REGULATOR=y
> @@ -83,17 +85,18 @@ CONFIG_SYSINFO=y
> CONFIG_SYSRESET=y
> # CONFIG_TPL_SYSRESET is not set
> CONFIG_USB=y
> +CONFIG_DM_USB_GADGET=y
> CONFIG_USB_XHCI_HCD=y
> +CONFIG_USB_XHCI_DWC3=y
> CONFIG_USB_EHCI_HCD=y
> CONFIG_USB_EHCI_GENERIC=y
> CONFIG_USB_OHCI_HCD=y
> CONFIG_USB_OHCI_GENERIC=y
> -CONFIG_USB_DWC2=y
> CONFIG_USB_DWC3=y
> # CONFIG_USB_DWC3_GADGET is not set
> -CONFIG_USB_DWC3_GENERIC=y
> CONFIG_USB_GADGET=y
> CONFIG_USB_GADGET_DWC2_OTG=y
> +CONFIG_USB_FUNCTION_ROCKUSB=y
> CONFIG_SPL_TINY_MEMSET=y
> CONFIG_TPL_TINY_MEMSET=y
> CONFIG_ERRNO_STR=y
> diff --git a/configs/nanopi-r2c-plus-rk3328_defconfig b/configs/nanopi-r2c-plus-rk3328_defconfig
> index 5302fd91a0f5..beef682a582e 100644
> --- a/configs/nanopi-r2c-plus-rk3328_defconfig
> +++ b/configs/nanopi-r2c-plus-rk3328_defconfig
> @@ -33,6 +33,8 @@ CONFIG_CMD_GPIO=y
> CONFIG_CMD_GPT=y
> CONFIG_CMD_MMC=y
> CONFIG_CMD_USB=y
> +CONFIG_CMD_ROCKUSB=y
> +CONFIG_CMD_USB_MASS_STORAGE=y
> # CONFIG_CMD_SETEXPR is not set
> CONFIG_CMD_TIME=y
> CONFIG_CMD_REGULATOR=y
> @@ -90,17 +92,18 @@ CONFIG_SYSINFO=y
> CONFIG_SYSRESET=y
> # CONFIG_TPL_SYSRESET is not set
> CONFIG_USB=y
> +CONFIG_DM_USB_GADGET=y
> CONFIG_USB_XHCI_HCD=y
> +CONFIG_USB_XHCI_DWC3=y
> CONFIG_USB_EHCI_HCD=y
> CONFIG_USB_EHCI_GENERIC=y
> CONFIG_USB_OHCI_HCD=y
> CONFIG_USB_OHCI_GENERIC=y
> -CONFIG_USB_DWC2=y
> CONFIG_USB_DWC3=y
> # CONFIG_USB_DWC3_GADGET is not set
> -CONFIG_USB_DWC3_GENERIC=y
> CONFIG_USB_GADGET=y
> CONFIG_USB_GADGET_DWC2_OTG=y
> +CONFIG_USB_FUNCTION_ROCKUSB=y
> CONFIG_SPL_TINY_MEMSET=y
> CONFIG_TPL_TINY_MEMSET=y
> CONFIG_ERRNO_STR=y
> diff --git a/configs/nanopi-r2c-rk3328_defconfig b/configs/nanopi-r2c-rk3328_defconfig
> index 5a722c182631..8960c1afaba5 100644
> --- a/configs/nanopi-r2c-rk3328_defconfig
> +++ b/configs/nanopi-r2c-rk3328_defconfig
> @@ -33,6 +33,8 @@ CONFIG_CMD_GPIO=y
> CONFIG_CMD_GPT=y
> CONFIG_CMD_MMC=y
> CONFIG_CMD_USB=y
> +CONFIG_CMD_ROCKUSB=y
> +CONFIG_CMD_USB_MASS_STORAGE=y
> # CONFIG_CMD_SETEXPR is not set
> CONFIG_CMD_TIME=y
> CONFIG_CMD_REGULATOR=y
> @@ -90,17 +92,18 @@ CONFIG_SYSINFO=y
> CONFIG_SYSRESET=y
> # CONFIG_TPL_SYSRESET is not set
> CONFIG_USB=y
> +CONFIG_DM_USB_GADGET=y
> CONFIG_USB_XHCI_HCD=y
> +CONFIG_USB_XHCI_DWC3=y
> CONFIG_USB_EHCI_HCD=y
> CONFIG_USB_EHCI_GENERIC=y
> CONFIG_USB_OHCI_HCD=y
> CONFIG_USB_OHCI_GENERIC=y
> -CONFIG_USB_DWC2=y
> CONFIG_USB_DWC3=y
> # CONFIG_USB_DWC3_GADGET is not set
> -CONFIG_USB_DWC3_GENERIC=y
> CONFIG_USB_GADGET=y
> CONFIG_USB_GADGET_DWC2_OTG=y
> +CONFIG_USB_FUNCTION_ROCKUSB=y
> CONFIG_SPL_TINY_MEMSET=y
> CONFIG_TPL_TINY_MEMSET=y
> CONFIG_ERRNO_STR=y
> diff --git a/configs/nanopi-r2s-rk3328_defconfig b/configs/nanopi-r2s-rk3328_defconfig
> index 985d02475ece..96e67e248d32 100644
> --- a/configs/nanopi-r2s-rk3328_defconfig
> +++ b/configs/nanopi-r2s-rk3328_defconfig
> @@ -33,6 +33,8 @@ CONFIG_CMD_GPIO=y
> CONFIG_CMD_GPT=y
> CONFIG_CMD_MMC=y
> CONFIG_CMD_USB=y
> +CONFIG_CMD_ROCKUSB=y
> +CONFIG_CMD_USB_MASS_STORAGE=y
> # CONFIG_CMD_SETEXPR is not set
> CONFIG_CMD_TIME=y
> CONFIG_CMD_REGULATOR=y
> @@ -90,17 +92,18 @@ CONFIG_SYSINFO=y
> CONFIG_SYSRESET=y
> # CONFIG_TPL_SYSRESET is not set
> CONFIG_USB=y
> +CONFIG_DM_USB_GADGET=y
> CONFIG_USB_XHCI_HCD=y
> +CONFIG_USB_XHCI_DWC3=y
> CONFIG_USB_EHCI_HCD=y
> CONFIG_USB_EHCI_GENERIC=y
> CONFIG_USB_OHCI_HCD=y
> CONFIG_USB_OHCI_GENERIC=y
> -CONFIG_USB_DWC2=y
> CONFIG_USB_DWC3=y
> # CONFIG_USB_DWC3_GADGET is not set
> -CONFIG_USB_DWC3_GENERIC=y
> CONFIG_USB_GADGET=y
> CONFIG_USB_GADGET_DWC2_OTG=y
> +CONFIG_USB_FUNCTION_ROCKUSB=y
> CONFIG_SPL_TINY_MEMSET=y
> CONFIG_TPL_TINY_MEMSET=y
> CONFIG_ERRNO_STR=y
> diff --git a/configs/orangepi-r1-plus-lts-rk3328_defconfig b/configs/orangepi-r1-plus-lts-rk3328_defconfig
> index e9f7a1306923..5fbbd5fc6558 100644
> --- a/configs/orangepi-r1-plus-lts-rk3328_defconfig
> +++ b/configs/orangepi-r1-plus-lts-rk3328_defconfig
> @@ -38,6 +38,8 @@ CONFIG_CMD_GPIO=y
> CONFIG_CMD_GPT=y
> CONFIG_CMD_MMC=y
> CONFIG_CMD_USB=y
> +CONFIG_CMD_ROCKUSB=y
> +CONFIG_CMD_USB_MASS_STORAGE=y
> # CONFIG_CMD_SETEXPR is not set
> CONFIG_CMD_TIME=y
> CONFIG_CMD_REGULATOR=y
> @@ -100,17 +102,18 @@ CONFIG_SYSINFO=y
> CONFIG_SYSRESET=y
> # CONFIG_TPL_SYSRESET is not set
> CONFIG_USB=y
> +CONFIG_DM_USB_GADGET=y
> CONFIG_USB_XHCI_HCD=y
> +CONFIG_USB_XHCI_DWC3=y
> CONFIG_USB_EHCI_HCD=y
> CONFIG_USB_EHCI_GENERIC=y
> CONFIG_USB_OHCI_HCD=y
> CONFIG_USB_OHCI_GENERIC=y
> -CONFIG_USB_DWC2=y
> CONFIG_USB_DWC3=y
> # CONFIG_USB_DWC3_GADGET is not set
> -CONFIG_USB_DWC3_GENERIC=y
> CONFIG_USB_GADGET=y
> CONFIG_USB_GADGET_DWC2_OTG=y
> +CONFIG_USB_FUNCTION_ROCKUSB=y
> CONFIG_SPL_TINY_MEMSET=y
> CONFIG_TPL_TINY_MEMSET=y
> CONFIG_ERRNO_STR=y
> diff --git a/configs/orangepi-r1-plus-rk3328_defconfig b/configs/orangepi-r1-plus-rk3328_defconfig
> index 6019f33ae3f5..c5afe5ea6e5c 100644
> --- a/configs/orangepi-r1-plus-rk3328_defconfig
> +++ b/configs/orangepi-r1-plus-rk3328_defconfig
> @@ -38,6 +38,8 @@ CONFIG_CMD_GPIO=y
> CONFIG_CMD_GPT=y
> CONFIG_CMD_MMC=y
> CONFIG_CMD_USB=y
> +CONFIG_CMD_ROCKUSB=y
> +CONFIG_CMD_USB_MASS_STORAGE=y
> # CONFIG_CMD_SETEXPR is not set
> CONFIG_CMD_TIME=y
> CONFIG_CMD_REGULATOR=y
> @@ -100,17 +102,18 @@ CONFIG_SYSINFO=y
> CONFIG_SYSRESET=y
> # CONFIG_TPL_SYSRESET is not set
> CONFIG_USB=y
> +CONFIG_DM_USB_GADGET=y
> CONFIG_USB_XHCI_HCD=y
> +CONFIG_USB_XHCI_DWC3=y
> CONFIG_USB_EHCI_HCD=y
> CONFIG_USB_EHCI_GENERIC=y
> CONFIG_USB_OHCI_HCD=y
> CONFIG_USB_OHCI_GENERIC=y
> -CONFIG_USB_DWC2=y
> CONFIG_USB_DWC3=y
> # CONFIG_USB_DWC3_GADGET is not set
> -CONFIG_USB_DWC3_GENERIC=y
> CONFIG_USB_GADGET=y
> CONFIG_USB_GADGET_DWC2_OTG=y
> +CONFIG_USB_FUNCTION_ROCKUSB=y
> CONFIG_SPL_TINY_MEMSET=y
> CONFIG_TPL_TINY_MEMSET=y
> CONFIG_ERRNO_STR=y
> diff --git a/configs/roc-cc-rk3328_defconfig b/configs/roc-cc-rk3328_defconfig
> index 191dbff928bb..6526d2606e72 100644
> --- a/configs/roc-cc-rk3328_defconfig
> +++ b/configs/roc-cc-rk3328_defconfig
> @@ -13,7 +13,6 @@ CONFIG_DEBUG_UART_BASE=0xFF130000
> CONFIG_DEBUG_UART_CLOCK=24000000
> CONFIG_SYS_LOAD_ADDR=0x800800
> CONFIG_DEBUG_UART=y
> -# CONFIG_ANDROID_BOOT_IMAGE is not set
> CONFIG_FIT=y
> CONFIG_FIT_VERBOSE=y
> CONFIG_SPL_FIT_SIGNATURE=y
> @@ -34,7 +33,6 @@ CONFIG_CMD_GPT=y
> CONFIG_CMD_MMC=y
> CONFIG_CMD_POWEROFF=y
> CONFIG_CMD_USB=y
> -CONFIG_CMD_USB_MASS_STORAGE=y
> # CONFIG_CMD_SETEXPR is not set
> CONFIG_CMD_TIME=y
> CONFIG_CMD_REGULATOR=y
> @@ -55,8 +53,6 @@ CONFIG_SPL_SYSCON=y
> CONFIG_TPL_SYSCON=y
> CONFIG_CLK=y
> CONFIG_SPL_CLK=y
> -CONFIG_FASTBOOT_BUF_ADDR=0x800800
> -CONFIG_FASTBOOT_CMD_OEM_FORMAT=y
> CONFIG_ROCKCHIP_GPIO=y
> CONFIG_SYS_I2C_ROCKCHIP=y
> CONFIG_MMC_DW=y
> @@ -97,10 +93,7 @@ CONFIG_USB_OHCI_HCD=y
> CONFIG_USB_OHCI_GENERIC=y
> CONFIG_USB_DWC2=y
> CONFIG_USB_DWC3=y
> -# CONFIG_USB_DWC3_GADGET is not set
> CONFIG_USB_DWC3_GENERIC=y
> -CONFIG_USB_GADGET=y
> -CONFIG_USB_GADGET_DWC2_OTG=y
> CONFIG_SPL_TINY_MEMSET=y
> CONFIG_TPL_TINY_MEMSET=y
> CONFIG_ERRNO_STR=y
> diff --git a/configs/rock-pi-e-rk3328_defconfig b/configs/rock-pi-e-rk3328_defconfig
> index e4f2123e0b17..23029255bca2 100644
> --- a/configs/rock-pi-e-rk3328_defconfig
> +++ b/configs/rock-pi-e-rk3328_defconfig
> @@ -13,7 +13,6 @@ CONFIG_DEBUG_UART_BASE=0xFF130000
> CONFIG_DEBUG_UART_CLOCK=24000000
> CONFIG_SYS_LOAD_ADDR=0x800800
> CONFIG_DEBUG_UART=y
> -# CONFIG_ANDROID_BOOT_IMAGE is not set
> CONFIG_FIT=y
> CONFIG_FIT_VERBOSE=y
> CONFIG_SPL_FIT_SIGNATURE=y
> @@ -52,8 +51,6 @@ CONFIG_SPL_SYSCON=y
> CONFIG_TPL_SYSCON=y
> CONFIG_CLK=y
> CONFIG_SPL_CLK=y
> -CONFIG_FASTBOOT_BUF_ADDR=0x800800
> -CONFIG_FASTBOOT_CMD_OEM_FORMAT=y
> CONFIG_ROCKCHIP_GPIO=y
> CONFIG_SYS_I2C_ROCKCHIP=y
> CONFIG_MMC_DW=y
> @@ -92,12 +89,8 @@ CONFIG_USB_EHCI_HCD=y
> CONFIG_USB_EHCI_GENERIC=y
> CONFIG_USB_OHCI_HCD=y
> CONFIG_USB_OHCI_GENERIC=y
> -CONFIG_USB_DWC2=y
> CONFIG_USB_DWC3=y
> -# CONFIG_USB_DWC3_GADGET is not set
> CONFIG_USB_DWC3_GENERIC=y
> -CONFIG_USB_GADGET=y
> -CONFIG_USB_GADGET_DWC2_OTG=y
> CONFIG_SPL_TINY_MEMSET=y
> CONFIG_TPL_TINY_MEMSET=y
> CONFIG_ERRNO_STR=y
> diff --git a/configs/rock64-rk3328_defconfig b/configs/rock64-rk3328_defconfig
> index f38431891bf8..b0be1d1d7633 100644
> --- a/configs/rock64-rk3328_defconfig
> +++ b/configs/rock64-rk3328_defconfig
> @@ -16,7 +16,6 @@ CONFIG_SPL_SPI_FLASH_SUPPORT=y
> CONFIG_SPL_SPI=y
> CONFIG_SYS_LOAD_ADDR=0x800800
> CONFIG_DEBUG_UART=y
> -# CONFIG_ANDROID_BOOT_IMAGE is not set
> CONFIG_FIT=y
> CONFIG_FIT_VERBOSE=y
> CONFIG_SPL_FIT_SIGNATURE=y
> @@ -59,8 +58,6 @@ CONFIG_SPL_SYSCON=y
> CONFIG_TPL_SYSCON=y
> CONFIG_CLK=y
> CONFIG_SPL_CLK=y
> -CONFIG_FASTBOOT_BUF_ADDR=0x800800
> -CONFIG_FASTBOOT_CMD_OEM_FORMAT=y
> CONFIG_ROCKCHIP_GPIO=y
> CONFIG_SYS_I2C_ROCKCHIP=y
> CONFIG_MMC_DW=y
> @@ -106,10 +103,7 @@ CONFIG_USB_OHCI_HCD=y
> CONFIG_USB_OHCI_GENERIC=y
> CONFIG_USB_DWC2=y
> CONFIG_USB_DWC3=y
> -# CONFIG_USB_DWC3_GADGET is not set
> CONFIG_USB_DWC3_GENERIC=y
> -CONFIG_USB_GADGET=y
> -CONFIG_USB_GADGET_DWC2_OTG=y
> CONFIG_SPL_TINY_MEMSET=y
> CONFIG_TPL_TINY_MEMSET=y
> CONFIG_ERRNO_STR=y
More information about the U-Boot
mailing list