[PATCH v3 14/14] qcom_defconfig: enable USB

[Caleb Connolly]

Enable support for the DWC3 USB controller and required dependencies for
Qualcomm boards, specifically the DB845c:
* IOMMU / SMMU
* USB high-speed PHYs
* Mass storage and ACM gadgets

Signed-off-by: Caleb Connolly <caleb.connolly at linaro.org>
---
 configs/qcom_defconfig | 49 ++++++++++++++++++++++++++-----------------------
 1 file changed, 26 insertions(+), 23 deletions(-)

diff --git a/configs/qcom_defconfig b/configs/qcom_defconfig
index eebd0d74bd51..156c205284dd 100644
--- a/configs/qcom_defconfig
+++ b/configs/qcom_defconfig
@@ -12,42 +12,63 @@ CONFIG_BOOTSTD_FULL=y
 CONFIG_BOOTDELAY=1
 CONFIG_USE_PREBOOT=y
 CONFIG_SAVE_PREV_BL_INITRAMFS_START_ADDR=y
 CONFIG_SYS_CBSIZE=512
+# CONFIG_SYS_DEVICE_NULLDEV is not set
 CONFIG_LOG_MAX_LEVEL=9
 CONFIG_LOG_DEFAULT_LEVEL=4
 # CONFIG_DISPLAY_CPUINFO is not set
 CONFIG_DISPLAY_BOARDINFO_LATE=y
 CONFIG_CMD_BOOTMENU=y
+CONFIG_CMD_EEPROM=y
+CONFIG_SYS_I2C_EEPROM_BUS=2
+CONFIG_SYS_I2C_EEPROM_ADDR_LEN=2
+CONFIG_SYS_EEPROM_PAGE_WRITE_BITS=5
+# CONFIG_CMD_BIND is not set
 CONFIG_CMD_CLK=y
 CONFIG_CMD_GPIO=y
+CONFIG_CMD_I2C=y
 CONFIG_CMD_MMC=y
 CONFIG_CMD_UFS=y
 CONFIG_CMD_USB=y
 CONFIG_CMD_CAT=y
 CONFIG_CMD_BMP=y
 CONFIG_CMD_LOG=y
 CONFIG_OF_LIVE=y
 # CONFIG_NET is not set
+CONFIG_DM_WARN=y
 # CONFIG_OFNODE_MULTI_TREE is not set
 CONFIG_BUTTON_QCOM_PMIC=y
 CONFIG_CLK=y
 CONFIG_CLK_QCOM_QCS404=y
 CONFIG_CLK_QCOM_SDM845=y
 CONFIG_MSM_GPIO=y
 CONFIG_QCOM_PMIC_GPIO=y
+CONFIG_DM_I2C=y
+CONFIG_SYS_I2C_QUP=y
+CONFIG_I2C_MUX=y
 CONFIG_DM_KEYBOARD=y
 CONFIG_BUTTON_KEYBOARD=y
+CONFIG_IOMMU=y
+CONFIG_QCOM_HYP_SMMU=y
+CONFIG_MISC=y
+CONFIG_NVMEM=y
+CONFIG_I2C_EEPROM=y
 CONFIG_MMC_HS200_SUPPORT=y
 CONFIG_MMC_SDHCI=y
 CONFIG_MMC_SDHCI_ADMA=y
 CONFIG_MMC_SDHCI_MSM=y
+CONFIG_DM_ETH_PHY=y
 CONFIG_PHY=y
+CONFIG_PHY_QCOM_QUSB2=y
+CONFIG_PHY_QCOM_USB_HS_7NM=y
 CONFIG_PINCTRL=y
 CONFIG_PINCTRL_QCOM_QCS404=y
 CONFIG_PINCTRL_QCOM_SDM845=y
 CONFIG_DM_PMIC=y
 CONFIG_PMIC_QCOM=y
+CONFIG_DM_REGULATOR=y
+CONFIG_DM_REGULATOR_FIXED=y
 CONFIG_SCSI=y
 CONFIG_MSM_SERIAL=y
 CONFIG_MSM_GENI_SERIAL=y
 CONFIG_SPMI_MSM=y
@@ -56,8 +77,13 @@ CONFIG_SYSINFO_SMBIOS=y
 CONFIG_USB=y
 CONFIG_USB_XHCI_HCD=y
 CONFIG_USB_XHCI_DWC3=y
 CONFIG_USB_DWC3=y
+CONFIG_USB_DWC3_GENERIC=y
+CONFIG_USB_GADGET=y
+CONFIG_USB_GADGET_DOWNLOAD=y
+CONFIG_USB_FUNCTION_MASS_STORAGE=y
+CONFIG_USB_FUNCTION_ACM=y
 CONFIG_UFS=y
 CONFIG_VIDEO=y
 # CONFIG_VIDEO_FONT_8X16 is not set
 CONFIG_VIDEO_FONT_16X32=y
@@ -66,27 +92,4 @@ CONFIG_NO_FB_CLEAR=y
 CONFIG_VIDEO_SIMPLE=y
 CONFIG_HEXDUMP=y
 # CONFIG_GENERATE_SMBIOS_TABLE is not set
 CONFIG_LMB_MAX_REGIONS=64
-CONFIG_CMD_DHCP=y
-CONFIG_CMD_EEPROM=y
-CONFIG_CMD_I2C=y
-CONFIG_CMD_PING=y
-CONFIG_DM_ETH=y
-CONFIG_DM_ETH_PHY=y
-CONFIG_DM_MDIO=y
-CONFIG_DWC_ETH_QOS=y
-CONFIG_DWC_ETH_QOS_QCOM=y
-CONFIG_RGMII=y
-CONFIG_PHY_MICREL=y
-CONFIG_PHY_MICREL_KSZ90X1=y
-CONFIG_MISC=y
-CONFIG_NVMEM=y
-CONFIG_DM_I2C=y
-CONFIG_I2C_SUPPORT=y
-CONFIG_I2C_MUX=y
-CONFIG_I2C_EEPROM=y
-CONFIG_SYS_I2C=y
-CONFIG_SYS_I2C_QUP=y
-CONFIG_SYS_I2C_EEPROM_BUS=2
-CONFIG_SYS_I2C_EEPROM_ADDR_LEN=2
-CONFIG_SYS_EEPROM_PAGE_WRITE_BITS=5

-- 
2.44.0