[PATCH v3] test: dm: add button_cmd test

Mattijs Korpershoek mkorpershoek at baylibre.com
Thu Mar 21 11:08:03 CET 2024


Hi Caleb,

Thank you for the patch.

On mar., mars 19, 2024 at 13:24, Caleb Connolly <caleb.connolly at linaro.org> wrote:

> Add a test for the button_cmd feature. This validates that commands can
> be mapped to two buttons, that the correct command runs based on which
> button is pressed, that only 1 command is run, and that no command runs
> if button_cmd_0_name is wrong or unset.
>
> Additionally, fix a potential uninitialised variable use caught by these
> tests, the btn variable in get_button_cmd() is assumed to be null if
> button_get_by_label() fails, but it's actually used uninitialised in
> that case.
>
> CONFIG_BUTTON is now enabled automatically and was removed when running
> save_defconfig.
>
> Fixes: e761035b6423 ("boot: add support for button commands")
> Signed-off-by: Caleb Connolly <caleb.connolly at linaro.org>

Reviewed-by: Mattijs Korpershoek <mkorpershoek at baylibre.com>

> ---
> Pipeline: https://source.denx.de/u-boot/custodians/u-boot-snapdragon/-/pipelines/19995
> Changes in v3:
> - Enable CONFIG_BUTTON_CMD for sandbox_flattree as well.
> - Link to v2: https://lore.kernel.org/u-boot/20240305145111.1391645-1-caleb.connolly@linaro.org
>
> Changes in v2:
> - Explicitly assign btn as NULL in get_button_cmd(). This fixes a
>   bug where if the undefined variable is non-zero the
>   button_get_by_label() check would fail and result in invalid memory
>   being accessed.
> - Enable CONFIG_BUTTON_CMD for sandbox64 as well as sandbox.
> - Link to v1: https://lore.kernel.org/u-boot/20240214170357.4091708-1-caleb.connolly@linaro.org/
> ---
>  common/button_cmd.c                |  2 +-
>  configs/sandbox64_defconfig        |  1 +
>  configs/sandbox_defconfig          |  1 +
>  configs/sandbox_flattree_defconfig |  1 +
>  test/dm/button.c                   | 96 ++++++++++++++++++++++++++++++
>  5 files changed, 100 insertions(+), 1 deletion(-)
>
> diff --git a/common/button_cmd.c b/common/button_cmd.c
> index b6a8434d6f29..8642c26735cc 100644
> --- a/common/button_cmd.c
> +++ b/common/button_cmd.c
> @@ -32,9 +32,9 @@ struct button_cmd {
>   */
>  static int get_button_cmd(int n, struct button_cmd *cmd)
>  {
>  	const char *cmd_str;
> -	struct udevice *btn;
> +	struct udevice *btn = NULL;
>  	char buf[24];
>  
>  	snprintf(buf, sizeof(buf), "button_cmd_%d_name", n);
>  	cmd->btn_name = env_get(buf);
> diff --git a/configs/sandbox64_defconfig b/configs/sandbox64_defconfig
> index 3be9a00a8575..a62faf772482 100644
> --- a/configs/sandbox64_defconfig
> +++ b/configs/sandbox64_defconfig
> @@ -10,8 +10,9 @@ CONFIG_PCI=y
>  CONFIG_SANDBOX64=y
>  CONFIG_DEBUG_UART=y
>  CONFIG_SYS_MEMTEST_START=0x00100000
>  CONFIG_SYS_MEMTEST_END=0x00101000
> +CONFIG_BUTTON_CMD=y
>  CONFIG_FIT=y
>  CONFIG_FIT_SIGNATURE=y
>  CONFIG_FIT_VERBOSE=y
>  CONFIG_LEGACY_IMAGE_FORMAT=y
> diff --git a/configs/sandbox_defconfig b/configs/sandbox_defconfig
> index 4ad10363e91b..93b52f2de5cf 100644
> --- a/configs/sandbox_defconfig
> +++ b/configs/sandbox_defconfig
> @@ -9,8 +9,9 @@ CONFIG_SYS_LOAD_ADDR=0x0
>  CONFIG_PCI=y
>  CONFIG_DEBUG_UART=y
>  CONFIG_SYS_MEMTEST_START=0x00100000
>  CONFIG_SYS_MEMTEST_END=0x00101000
> +CONFIG_BUTTON_CMD=y
>  CONFIG_FIT=y
>  CONFIG_FIT_RSASSA_PSS=y
>  CONFIG_FIT_CIPHER=y
>  CONFIG_FIT_VERBOSE=y
> diff --git a/configs/sandbox_flattree_defconfig b/configs/sandbox_flattree_defconfig
> index 039018627527..6bf8874e722e 100644
> --- a/configs/sandbox_flattree_defconfig
> +++ b/configs/sandbox_flattree_defconfig
> @@ -7,8 +7,9 @@ CONFIG_SYS_LOAD_ADDR=0x0
>  CONFIG_PCI=y
>  CONFIG_DEBUG_UART=y
>  CONFIG_SYS_MEMTEST_START=0x00100000
>  CONFIG_SYS_MEMTEST_END=0x00101000
> +CONFIG_BUTTON_CMD=y
>  CONFIG_FIT=y
>  CONFIG_FIT_SIGNATURE=y
>  CONFIG_FIT_VERBOSE=y
>  CONFIG_LEGACY_IMAGE_FORMAT=y
> diff --git a/test/dm/button.c b/test/dm/button.c
> index 3318668df25a..830d96fbef34 100644
> --- a/test/dm/button.c
> +++ b/test/dm/button.c
> @@ -130,4 +130,100 @@ static int dm_test_button_keys_adc(struct unit_test_state *uts)
>  
>  	return 0;
>  }
>  DM_TEST(dm_test_button_keys_adc, UT_TESTF_SCAN_PDATA | UT_TESTF_SCAN_FDT);
> +
> +/* Test of the button uclass using the button_gpio driver */
> +static int dm_test_button_cmd(struct unit_test_state *uts)
> +{
> +	struct udevice *btn1_dev, *btn2_dev, *gpio;
> +	const char *envstr;
> +
> +#define BTN1_GPIO 3
> +#define BTN2_GPIO 4
> +#define BTN1_PASS_VAR "test_button_cmds_0"
> +#define BTN2_PASS_VAR "test_button_cmds_1"
> +
> +	/*
> +	 * Buttons 1 and 2 are connected to gpio_a gpios 3 and 4 respectively.
> +	 * set the GPIOs to known values and then check that the appropriate
> +	 * commands are run when invoking process_button_cmds().
> +	 */
> +	ut_assertok(uclass_get_device(UCLASS_BUTTON, 1, &btn1_dev));
> +	ut_assertok(uclass_get_device(UCLASS_BUTTON, 2, &btn2_dev));
> +	ut_assertok(uclass_get_device(UCLASS_GPIO, 1, &gpio));
> +
> +	/*
> +	 * Map a command to button 1 and check that it process_button_cmds()
> +	 * runs it if called with button 1 pressed.
> +	 */
> +	ut_assertok(env_set("button_cmd_0_name", "button1"));
> +	ut_assertok(env_set("button_cmd_0", "env set " BTN1_PASS_VAR " PASS"));
> +	ut_assertok(sandbox_gpio_set_value(gpio, BTN1_GPIO, 1));
> +	/* Sanity check that the button is actually pressed */
> +	ut_asserteq(BUTTON_ON, button_get_state(btn1_dev));
> +	process_button_cmds();
> +	ut_assertnonnull((envstr = env_get(BTN1_PASS_VAR)));
> +	ut_asserteq_str(envstr, "PASS");
> +
> +	/* Clear result */
> +	ut_assertok(env_set(BTN1_PASS_VAR, NULL));
> +
> +	/*
> +	 * Map a command for button 2, press it, check that only the command
> +	 * for button 1 runs because it comes first and is also pressed.
> +	 */
> +	ut_assertok(env_set("button_cmd_1_name", "button2"));
> +	ut_assertok(env_set("button_cmd_1", "env set " BTN2_PASS_VAR " PASS"));
> +	ut_assertok(sandbox_gpio_set_value(gpio, BTN2_GPIO, 1));
> +	ut_asserteq(BUTTON_ON, button_get_state(btn2_dev));
> +	process_button_cmds();
> +	/* Check that button 1 triggered again */
> +	ut_assertnonnull((envstr = env_get(BTN1_PASS_VAR)));
> +	ut_asserteq_str(envstr, "PASS");
> +	/* And button 2 didn't */
> +	ut_assertnull(env_get(BTN2_PASS_VAR));
> +
> +	/* Clear result */
> +	ut_assertok(env_set(BTN1_PASS_VAR, NULL));
> +
> +	/*
> +	 * Release button 1 and check that the command for button 2 is run
> +	 */
> +	ut_assertok(sandbox_gpio_set_value(gpio, BTN1_GPIO, 0));
> +	process_button_cmds();
> +	ut_assertnull(env_get(BTN1_PASS_VAR));
> +	/* Check that the command for button 2 ran */
> +	ut_assertnonnull((envstr = env_get(BTN2_PASS_VAR)));
> +	ut_asserteq_str(envstr, "PASS");
> +
> +	/* Clear result */
> +	ut_assertok(env_set(BTN2_PASS_VAR, NULL));
> +
> +	/*
> +	 * Unset "button_cmd_0_name" and check that no commands run even
> +	 * with both buttons pressed.
> +	 */
> +	ut_assertok(env_set("button_cmd_0_name", NULL));
> +	/* Press button 1 (button 2 is already pressed )*/
> +	ut_assertok(sandbox_gpio_set_value(gpio, BTN1_GPIO, 1));
> +	ut_asserteq(BUTTON_ON, button_get_state(btn1_dev));
> +	process_button_cmds();
> +	ut_assertnull(env_get(BTN1_PASS_VAR));
> +	ut_assertnull(env_get(BTN2_PASS_VAR));
> +
> +	/*
> +	 * Check that no command is run if the button name is wrong.
> +	 */
> +	ut_assertok(env_set("button_cmd_0_name", "invalid_button"));
> +	process_button_cmds();
> +	ut_assertnull(env_get(BTN1_PASS_VAR));
> +	ut_assertnull(env_get(BTN2_PASS_VAR));
> +
> +#undef BTN1_PASS_VAR
> +#undef BTN2_PASS_VAR
> +#undef BTN1_GPIO
> +#undef BTN2_GPIO
> +
> +	return 0;
> +}
> +DM_TEST(dm_test_button_cmd, UT_TESTF_SCAN_PDATA | UT_TESTF_SCAN_FDT);
> -- 
> 2.44.0


More information about the U-Boot mailing list