[PATCH v7] remoteproc: uclass: Add methods to load firmware to rproc and boot rproc
MD Danish Anwar
danishanwar at ti.com
Thu Mar 21 11:28:19 CET 2024
Add APIs to set a firmware_name to a rproc and boot the rproc with the
same firmware.
Clients can call rproc_set_firmware() API to set firmware_name for a rproc
whereas rproc_boot() will load the firmware set by rproc_set_firmware() to
a buffer by calling request_firmware_into_buf(). rproc_boot() will then
load the firmware file to the remote processor and start the remote
processor.
Signed-off-by: MD Danish Anwar <danishanwar at ti.com>
Acked-by: Ravi Gunasekaran <r-gunasekaran at ti.com>
Reviewed-by: Roger Quadros <rogerq at kernel.org>
---
Changes from v6 to v7:
*) Removed selecting FS_LOADER by default in remoteproc Kconfig.
*) Wrapped the rproc APIs using FS_LOADER inside #ifdef CONFIG_FS_LOADER.
*) Added Reviewed-by tag from Roger Quadros <rogerq at kernel.org>
Changes from v5 to v6:
*) Collected Acked-by tag from Ravi Gunasekaran <r-gunasekaran at ti.com>
*) Fixed few typos as pointed out by Roger Quadros <rogerq at kernel.org>
*) Added if condition to check if uc_pdata->fw_name exists and free it
before the strndup as suggested by Roger Quadros <rogerq at kernel.org>
Changes from v4 to v5:
*) Added Kconfig option REMOTEPROC_MAX_FW_SIZE to set max firmware size
that can be loaded to a rproc.
*) Added freeing of address in rproc_boot() as pointed out by Ravi.
*) Allocating the address at a later point in rproc_boot()
*) Rebased on latest u-boot/master [commit
9e00b6993f724da9699ef12573307afea8c19284]
Changes from v3 to v4:
*) No functional change. Splitted the patch out of the series as suggested
by Nishant.
*) Droppped the RFC tag.
v6: https://lore.kernel.org/all/20240228120645.958316-1-danishanwar@ti.com/
v5: https://lore.kernel.org/all/20240217122602.3402774-1-danishanwar@ti.com/
v4: https://lore.kernel.org/all/20240130063322.2345057-1-danishanwar@ti.com/
v3: https://lore.kernel.org/all/20240124064930.1787929-4-danishanwar@ti.com/
drivers/remoteproc/Kconfig | 7 ++
drivers/remoteproc/rproc-uclass.c | 104 ++++++++++++++++++++++++++++++
include/remoteproc.h | 34 ++++++++++
3 files changed, 145 insertions(+)
diff --git a/drivers/remoteproc/Kconfig b/drivers/remoteproc/Kconfig
index 781de530af..a49802c132 100644
--- a/drivers/remoteproc/Kconfig
+++ b/drivers/remoteproc/Kconfig
@@ -102,4 +102,11 @@ config REMOTEPROC_TI_IPU
help
Say 'y' here to add support for TI' K3 remoteproc driver.
+config REMOTEPROC_MAX_FW_SIZE
+ hex "Maximum size of firmware file that needs to be loaded to the remote processor"
+ default 0x10000
+ help
+ Maximum size of the firmware file (elf, binary) that needs to be
+ loaded to the remote processor.
+
endmenu
diff --git a/drivers/remoteproc/rproc-uclass.c b/drivers/remoteproc/rproc-uclass.c
index 28b362c887..aa7f7586a8 100644
--- a/drivers/remoteproc/rproc-uclass.c
+++ b/drivers/remoteproc/rproc-uclass.c
@@ -13,6 +13,7 @@
#include <log.h>
#include <malloc.h>
#include <virtio_ring.h>
+#include <fs_loader.h>
#include <remoteproc.h>
#include <asm/io.h>
#include <dm/device-internal.h>
@@ -961,3 +962,106 @@ unsigned long rproc_parse_resource_table(struct udevice *dev, struct rproc *cfg)
return 1;
}
+
+int rproc_set_firmware(struct udevice *rproc_dev, const char *fw_name)
+{
+ struct dm_rproc_uclass_pdata *uc_pdata;
+ int len;
+ char *p;
+
+ if (!rproc_dev || !fw_name)
+ return -EINVAL;
+
+ uc_pdata = dev_get_uclass_plat(rproc_dev);
+ if (!uc_pdata)
+ return -EINVAL;
+
+ len = strcspn(fw_name, "\n");
+ if (!len) {
+ debug("invalid firmware name\n");
+ return -EINVAL;
+ }
+
+ if (uc_pdata->fw_name)
+ free(uc_pdata->fw_name);
+
+ p = strndup(fw_name, len);
+ if (!p)
+ return -ENOMEM;
+
+ uc_pdata->fw_name = p;
+
+ return 0;
+}
+
+#if CONFIG_IS_ENABLED(FS_LOADER)
+int rproc_boot(struct udevice *rproc_dev)
+{
+ struct dm_rproc_uclass_pdata *uc_pdata;
+ struct udevice *fs_loader;
+ int core_id, ret = 0;
+ char *firmware;
+ void *addr;
+
+ if (!rproc_dev)
+ return -EINVAL;
+
+ uc_pdata = dev_get_uclass_plat(rproc_dev);
+ if (!uc_pdata)
+ return -EINVAL;
+
+ core_id = dev_seq(rproc_dev);
+ firmware = uc_pdata->fw_name;
+ if (!firmware) {
+ debug("No firmware name set for rproc core %d\n", core_id);
+ return -EINVAL;
+ }
+
+ /* Initialize all rproc cores */
+ if (!rproc_is_initialized()) {
+ ret = rproc_init();
+ if (ret) {
+ debug("rproc_init() failed: %d\n", ret);
+ return ret;
+ }
+ }
+
+ /* Loading firmware to a given address */
+ ret = get_fs_loader(&fs_loader);
+ if (ret) {
+ debug("could not get fs loader: %d\n", ret);
+ return ret;
+ }
+
+ if (CONFIG_REMOTEPROC_MAX_FW_SIZE) {
+ addr = malloc(CONFIG_REMOTEPROC_MAX_FW_SIZE);
+ if (!addr)
+ return -ENOMEM;
+ } else {
+ debug("CONFIG_REMOTEPROC_MAX_FW_SIZE not defined\n");
+ return -EINVAL;
+ }
+
+ ret = request_firmware_into_buf(fs_loader, firmware, addr, CONFIG_REMOTEPROC_MAX_FW_SIZE,
+ 0);
+ if (ret < 0) {
+ debug("could not request %s: %d\n", firmware, ret);
+ goto free_buffer;
+ }
+
+ ret = rproc_load(core_id, (ulong)addr, ret);
+ if (ret) {
+ debug("failed to load %s to rproc core %d from addr 0x%08lX err %d\n",
+ uc_pdata->fw_name, core_id, (ulong)addr, ret);
+ goto free_buffer;
+ }
+
+ ret = rproc_start(core_id);
+ if (ret)
+ debug("failed to start rproc core %d\n", core_id);
+
+free_buffer:
+ free(addr);
+ return ret;
+}
+#endif
diff --git a/include/remoteproc.h b/include/remoteproc.h
index 91a88791a4..6f8068e149 100644
--- a/include/remoteproc.h
+++ b/include/remoteproc.h
@@ -403,6 +403,7 @@ enum rproc_mem_type {
* @name: Platform-specific way of naming the Remote proc
* @mem_type: one of 'enum rproc_mem_type'
* @driver_plat_data: driver specific platform data that may be needed.
+ * @fw_name: firmware name
*
* This can be accessed with dev_get_uclass_plat() for any UCLASS_REMOTEPROC
* device.
@@ -412,6 +413,7 @@ struct dm_rproc_uclass_pdata {
const char *name;
enum rproc_mem_type mem_type;
void *driver_plat_data;
+ char *fw_name;
};
/**
@@ -705,6 +707,34 @@ unsigned long rproc_parse_resource_table(struct udevice *dev,
struct resource_table *rproc_find_resource_table(struct udevice *dev,
unsigned int addr,
int *tablesz);
+/**
+ * rproc_set_firmware() - assign a new firmware name
+ * @rproc_dev: device for which new firmware name is being assigned
+ * @fw_name: new firmware name to be assigned
+ *
+ * This function allows remoteproc drivers or clients to configure a custom
+ * firmware name. The function does not trigger a remote processor boot,
+ * only sets the firmware name used for a subsequent boot.
+ *
+ * This function sets the fw_name field in uclass pdata of the Remote proc
+ *
+ * Return: 0 on success or a negative value upon failure
+ */
+int rproc_set_firmware(struct udevice *rproc_dev, const char *fw_name);
+
+/**
+ * rproc_boot() - boot a remote processor
+ * @rproc_dev: rproc device to boot
+ *
+ * Boot a remote processor (i.e. load its firmware, power it on, ...).
+ *
+ * This function first loads the firmware set in the uclass pdata of Remote
+ * processor to a buffer and then loads firmware to the remote processor
+ * using rproc_load().
+ *
+ * Return: 0 on success, and an appropriate error value otherwise
+ */
+int rproc_boot(struct udevice *rproc_dev);
#else
static inline int rproc_init(void) { return -ENOSYS; }
static inline int rproc_dev_init(int id) { return -ENOSYS; }
@@ -744,6 +774,10 @@ static inline int rproc_elf_load_rsc_table(struct udevice *dev, ulong fw_addr,
ulong fw_size, ulong *rsc_addr,
ulong *rsc_size)
{ return -ENOSYS; }
+static inline int rproc_set_firmware(struct udevice *rproc_dev, const char *fw_name)
+{ return -ENOSYS; }
+static inline int rproc_boot(struct udevice *rproc_dev)
+{ return -ENOSYS; }
#endif
#endif /* _RPROC_H_ */
base-commit: e50cb36cb5e772d5bbd30d070faedf7323406364
--
2.34.1
More information about the U-Boot
mailing list