[PATCH v4 09/11] verdin-imx8mp_defconfig: Enable PCIe/NVMe support

[Sumit Garg]

Enable PCIe/NVMe support. Also, enable the reset driver which
is a prerequisite for PCIe support.

Acked-by: Francesco Dolcini <francesco.dolcini at toradex.com>
Tested-by: Marcel Ziswiler <marcel.ziswiler at toradex.com>
Signed-off-by: Sumit Garg <sumit.garg at linaro.org>
---
 configs/verdin-imx8mp_defconfig | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/configs/verdin-imx8mp_defconfig b/configs/verdin-imx8mp_defconfig
index 7ac5e65642c..b6194404baa 100644
--- a/configs/verdin-imx8mp_defconfig
+++ b/configs/verdin-imx8mp_defconfig
@@ -16,6 +16,7 @@ CONFIG_DEFAULT_DEVICE_TREE="imx8mp-verdin-wifi-dev"
 CONFIG_SPL_TEXT_BASE=0x920000
 CONFIG_TARGET_VERDIN_IMX8MP=y
 CONFIG_OF_LIBFDT_OVERLAY=y
+CONFIG_DM_RESET=y
 CONFIG_SYS_MONITOR_LEN=524288
 CONFIG_SPL_MMC=y
 CONFIG_SPL_SERIAL=y
@@ -26,6 +27,7 @@ CONFIG_SPL=y
 CONFIG_IMX_BOOTAUX=y
 CONFIG_SPL_IMX_ROMAPI_LOADADDR=0x48000000
 CONFIG_SYS_LOAD_ADDR=0x48200000
+CONFIG_PCI=y
 CONFIG_SYS_MEMTEST_START=0x40000000
 CONFIG_SYS_MEMTEST_END=0x80000000
 CONFIG_REMAKE_ELF=y
@@ -76,6 +78,7 @@ CONFIG_CMD_FUSE=y
 CONFIG_CMD_GPIO=y
 CONFIG_CMD_I2C=y
 CONFIG_CMD_MMC=y
+CONFIG_CMD_PCI=y
 CONFIG_CMD_READ=y
 CONFIG_CMD_USB=y
 CONFIG_CMD_USB_MASS_STORAGE=y
@@ -145,8 +148,11 @@ CONFIG_DWC_ETH_QOS_IMX=y
 CONFIG_FEC_MXC=y
 CONFIG_RGMII=y
 CONFIG_MII=y
+CONFIG_NVME_PCI=y
+CONFIG_PCIE_DW_IMX=y
 CONFIG_PHY=y
 CONFIG_PHY_IMX8MQ_USB=y
+CONFIG_PHY_IMX8M_PCIE=y
 CONFIG_PINCTRL=y
 CONFIG_SPL_PINCTRL=y
 CONFIG_PINCTRL_IMX8M=y
-- 
2.34.1