[PATCH v3 07/11] phy: phy-imx8m-pcie: Add support for i.MX8M{M/P} PCIe PHY

Sumit Garg sumit.garg at linaro.org
Fri Mar 22 05:36:06 CET 2024


On Fri, 22 Mar 2024 at 00:47, Marek Vasut <marex at denx.de> wrote:
>
> On 3/21/24 1:40 PM, Sumit Garg wrote:
> > On Thu, 14 Mar 2024 at 09:46, Marek Vasut <marex at denx.de> wrote:
> >>
> >> On 3/12/24 8:03 AM, Sumit Garg wrote:
> >>> Add initial support for i.MX8M{M/P} PCIe PHY. On i.MX8M{M/P} SoCs PCIe
> >>> PHY initialization moved to this standalone PHY driver.
> >>>
> >>> Inspired from counterpart Linux kernel v6.8-rc3 driver:
> >>> drivers/phy/freescale/phy-fsl-imx8m-pcie.c. Use last Linux kernel driver
> >>> reference commit 7559e7572c03 ("phy: Explicitly include correct DT
> >>> includes").
> >>
> >> [...]
> >>
> >>> +static int imx8_pcie_phy_probe(struct udevice *dev)
> >>> +{
> >>> +     struct imx8_pcie_phy *imx8_phy = dev_get_priv(dev);
> >>> +     ofnode gpr;
> >>> +     int ret = 0;
> >>> +
> >>> +     imx8_phy->drvdata = (void *)dev_get_driver_data(dev);
> >>> +     imx8_phy->base = dev_read_addr(dev);
> >>> +     if (!imx8_phy->base)
> >>> +             return -EINVAL;
> >>> +
> >>> +     /* get PHY refclk pad mode */
> >>> +     dev_read_u32(dev, "fsl,refclk-pad-mode", &imx8_phy->refclk_pad_mode);
> >>> +
> >>> +     imx8_phy->tx_deemph_gen1 = dev_read_u32_default(dev,
> >>> +                                                     "fsl,tx-deemph-gen1",
> >>> +                                                     0);
> >>> +     imx8_phy->tx_deemph_gen2 = dev_read_u32_default(dev,
> >>> +                                                     "fsl,tx-deemph-gen2",
> >>> +                                                     0);
> >>> +     imx8_phy->clkreq_unused = dev_read_bool(dev, "fsl,clkreq-unsupported");
> >>> +
> >>> +     /* Grab GPR config register range */
> >>> +     gpr = ofnode_by_compatible(ofnode_null(), imx8_phy->drvdata->gpr);
> >>> +     if (ofnode_equal(gpr, ofnode_null())) {
> >>> +             dev_err(dev, "unable to find GPR node\n");
> >>> +             return -ENODEV;
> >>> +     }
> >>> +
> >>> +     imx8_phy->iomuxc_gpr = syscon_node_to_regmap(gpr);
> >>> +     if (IS_ERR(imx8_phy->iomuxc_gpr)) {
> >>> +             dev_err(dev, "unable to find iomuxc registers\n");
> >>> +             return PTR_ERR(imx8_phy->iomuxc_gpr);
> >>> +     }
> >>
> >> syscon_regmap_lookup_by_compatible() should simplify these two steps ^ .
> >>
> >
> > After a close look, that API isn't supported by U-Boot yet. So I will
> > keep the existing implementation with your review tag. I hope that's
> > fine with you.
>
> Oh, uh, I had a local patch from previous round of PCIe experiments, I
> just sent it out, you are on CC. Can you do a follow up fix once this
> series V4 is in ?

Sure I can do that as a followup once your patch is merged.

-Sumit


More information about the U-Boot mailing list