[PATCH] arm: dts: kirkwood: Enable upstream DT on Kirkwood boards

Tony Dinh mibodhi at gmail.com
Fri Mar 22 22:46:31 CET 2024


Hi Michael,

On Fri, Mar 22, 2024 at 2:10 PM Michael Walle <michael at walle.cc> wrote:
>
> Hi Tony,
>
> On Fri Mar 22, 2024 at 3:17 AM CET, Tony Dinh wrote:
> > Enable OF_UPSTREAM to use upstream DT and add marvell/ prefix to the
> > DEFAULT_DEVICE_TREE for Kirkwood boards. And so we can directly build
> > DTBs from dts/upstream/src/arm/marvell, and including *-u-boot.dtsi
> > files from arch/arm/dts/ directory.
>
> Thanks for taking care.
>
> > Signed-off-by: Tony Dinh <mibodhi at gmail.com>
>
> Tested-by: Michael Walle <michael at walle.cc> # on lschlv2
>
> lsxl should work too as it is just different in memory and cpu
> frequency settings.
>
> > ---
> >
> >  arch/arm/dts/kirkwood-lschlv2-u-boot.dtsi   | 6 ++++--
> >  arch/arm/dts/kirkwood-lsxhl-u-boot.dtsi     | 6 ++++--
>
> arch/arm/dts/kirkwood-lschlv2.dts
> arch/arm/dts/kirkwood-lsxhl.dts
>
> Should be then be removed.

Thanks for the lschlv2 review/test! I plan to send a follow-up patch
to remove the corresponding DTS and DTSI files.

All the best,
Tony


>
> -michael


More information about the U-Boot mailing list