[PATCH u-boot-mvebu v2 00/18] Turris Omnia - New board revision support

Marek Behún kabel at kernel.org
Sat Mar 23 19:06:53 CET 2024


Hi Stefan,

this is v2 of series adding support for new board revision of Turris
Omnia.

See v1 at
  https://patchwork.ozlabs.org/project/uboot/cover/20240304152148.3847-1-kabel@kernel.org/

Changes since v1:
- MCU firmware features can be 32-bit wide, updated the code to support
  reading 32 bits of features (both in board driver and in gpio driver)
- gpio driver now moved to misc, since it handles more functionality
  (rng, sysreset)
- mvebu system-controller driver expanded to also support UCLASS_SYSRESET,
  configurable by config option
- LTO enabled by default for Turris Omnia, otherwise it won't fit into
  the space reserved for U-Boot with these changes
- enabled the poweroff command (via sysreset) in defconfig (new MCU
  firmware can power off the board voltage regulators)
- enabled the rng command in defconfig

Marek Behún (18):
  arm: mvebu: turris_omnia: Enable LTO by default on Turris Omnia
  arm: mvebu: turris_omnia: Add header containing MCU command interface
    and use it
  arm: mvebu: turris_{omnia, mox}: Don't print model two times
  arm: mvebu: turris_omnia: Update MCU status and features reading
  arm: mvebu: turris_omnia: Implement getting board information from MCU
  arm: mvebu: turris_omnia: Print board ECDSA public key if available
  arm: mvebu: turris_omnia: Disable Atmel SHA node if not present
  arm: mvebu: spl: Do not build mvebu-reset in SPL
  arm: mvebu: system-controller: Rework to use UCLASS_SYSCON
  arm: mvebu: system-controller: Select mvebu-reset if DM_RESET &&
    PCI_MVEBU
  arm: mvebu: system-controller: Add support for SYSRESET
  gpio: turris_omnia_mcu: Use byteorder conversion functions
  gpio: turris_omnia_mcu: Update firmware features reading
  gpio: turris_omnia_mcu: Add support for system power off via sysreset
  arm: mvebu: turris_omnia: Enable poweroff command via sysreset in
    defconfig
  cmd: rng: Print "Abort" on -EINTR
  misc: turris_omnia_mcu: Add support for rng provided by MCU
  arm: mvebu: turris_omnia: Enable rng command in defconfig

 arch/arm/mach-mvebu/Kconfig              |  25 ++
 arch/arm/mach-mvebu/Makefile             |   3 +-
 arch/arm/mach-mvebu/cpu.c                |   2 +
 arch/arm/mach-mvebu/system-controller.c  | 144 ++++++--
 board/CZ.NIC/turris_atsha_otp.c          |  27 +-
 board/CZ.NIC/turris_mox/turris_mox.c     |   5 +-
 board/CZ.NIC/turris_omnia/Makefile       |   2 +-
 board/CZ.NIC/turris_omnia/turris_omnia.c | 310 ++++++++++++-----
 cmd/rng.c                                |   7 +-
 configs/turris_omnia_defconfig           |   6 +
 drivers/gpio/Kconfig                     |   7 -
 drivers/gpio/Makefile                    |   1 -
 drivers/gpio/turris_omnia_mcu.c          | 316 -----------------
 drivers/misc/Kconfig                     |  11 +
 drivers/misc/Makefile                    |   1 +
 drivers/misc/turris_omnia_mcu.c          | 411 +++++++++++++++++++++++
 include/turris-omnia-mcu-interface.h     | 238 +++++++++++++
 17 files changed, 1034 insertions(+), 482 deletions(-)
 delete mode 100644 drivers/gpio/turris_omnia_mcu.c
 create mode 100644 drivers/misc/turris_omnia_mcu.c
 create mode 100644 include/turris-omnia-mcu-interface.h

-- 
2.43.2



More information about the U-Boot mailing list