[PATCH v2 06/11] net: dwc_eth_qos: Move log_debug statements on top of case block
Marek Vasut
marex at denx.de
Tue Mar 26 13:07:27 CET 2024
Move the log_debug() calls on top of the bit manipulation code.
No functional change.
Reviewed-by: Patrice Chotard <patrice.chotard at foss.st.com>
Signed-off-by: Marek Vasut <marex at denx.de>
---
Cc: Christophe Roullier <christophe.roullier at st.com>
Cc: Joe Hershberger <joe.hershberger at ni.com>
Cc: Patrice Chotard <patrice.chotard at foss.st.com>
Cc: Patrick Delaunay <patrick.delaunay at foss.st.com>
Cc: Ramon Fried <rfried.dev at gmail.com>
Cc: u-boot at dh-electronics.com
Cc: uboot-stm32 at st-md-mailman.stormreply.com
---
V2: Add RB from Patrice
---
drivers/net/dwc_eth_qos_stm32.c | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/drivers/net/dwc_eth_qos_stm32.c b/drivers/net/dwc_eth_qos_stm32.c
index 7545026b158..38037c47954 100644
--- a/drivers/net/dwc_eth_qos_stm32.c
+++ b/drivers/net/dwc_eth_qos_stm32.c
@@ -143,34 +143,34 @@ static int eqos_probe_syscfg_stm32(struct udevice *dev,
switch (interface_type) {
case PHY_INTERFACE_MODE_MII:
+ log_debug("PHY_INTERFACE_MODE_MII\n");
value = FIELD_PREP(SYSCFG_PMCSETR_ETH_SEL_MASK,
SYSCFG_PMCSETR_ETH_SEL_GMII_MII);
value |= SYSCFG_PMCSETR_ETH_REF_CLK_SEL;
- log_debug("PHY_INTERFACE_MODE_MII\n");
break;
case PHY_INTERFACE_MODE_GMII:
+ log_debug("PHY_INTERFACE_MODE_GMII\n");
value = FIELD_PREP(SYSCFG_PMCSETR_ETH_SEL_MASK,
SYSCFG_PMCSETR_ETH_SEL_GMII_MII);
if (eth_clk_sel_reg)
value |= SYSCFG_PMCSETR_ETH_CLK_SEL;
- log_debug("PHY_INTERFACE_MODE_GMII\n");
break;
case PHY_INTERFACE_MODE_RMII:
+ log_debug("PHY_INTERFACE_MODE_RMII\n");
value = FIELD_PREP(SYSCFG_PMCSETR_ETH_SEL_MASK,
SYSCFG_PMCSETR_ETH_SEL_RMII);
if (eth_ref_clk_sel_reg)
value |= SYSCFG_PMCSETR_ETH_REF_CLK_SEL;
- log_debug("PHY_INTERFACE_MODE_RMII\n");
break;
case PHY_INTERFACE_MODE_RGMII:
case PHY_INTERFACE_MODE_RGMII_ID:
case PHY_INTERFACE_MODE_RGMII_RXID:
case PHY_INTERFACE_MODE_RGMII_TXID:
+ log_debug("PHY_INTERFACE_MODE_RGMII\n");
value = FIELD_PREP(SYSCFG_PMCSETR_ETH_SEL_MASK,
SYSCFG_PMCSETR_ETH_SEL_RGMII);
if (eth_clk_sel_reg)
value |= SYSCFG_PMCSETR_ETH_CLK_SEL;
- log_debug("PHY_INTERFACE_MODE_RGMII\n");
break;
default:
log_debug("Do not manage %d interface\n",
--
2.43.0
More information about the U-Boot
mailing list