[PATCH 1/7] arm: ti: am3517_evm: Migrate to OF_UPSTREAM
Adam Ford
aford173 at gmail.com
Tue Mar 26 21:23:39 CET 2024
With the feature of OF_UPSTREAM now available, the device trees
for the SOM and baseboard can now deleted and the device tree
locations need to point to the ti/omap directory.
Signed-off-by: Adam Ford <aford173 at gmail.com>
diff --git a/arch/arm/dts/am3517-evm.dts b/arch/arm/dts/am3517-evm.dts
deleted file mode 100644
index d21bb2ccd0..0000000000
--- a/arch/arm/dts/am3517-evm.dts
+++ /dev/null
@@ -1,339 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (C) 2011 Texas Instruments Incorporated - https://www.ti.com/
- */
-/dts-v1/;
-
-#include "am3517.dtsi"
-#include "am3517-som.dtsi"
-#include "am3517-evm-ui.dtsi"
-#include <dt-bindings/input/input.h>
-
-/ {
- model = "TI AM3517 EVM (AM3517/05 TMDSEVM3517)";
- compatible = "ti,am3517-evm", "ti,am3517", "ti,omap3";
-
- aliases {
- display0 = &lcd0;
- };
-
- chosen {
- stdout-path = &uart3;
- };
-
- memory at 80000000 {
- device_type = "memory";
- reg = <0x80000000 0x10000000>; /* 256 MB */
- };
-
- vmmc_fixed: vmmc {
- compatible = "regulator-fixed";
- regulator-name = "vmmc_fixed";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- };
-
- gpio-keys {
- compatible = "gpio-keys-polled";
- poll-interval = <100>;
-
- button-user {
- label = "User Push Button";
- linux,code = <BTN_0>;
- gpios = <&tca6416 5 GPIO_ACTIVE_LOW>;
- };
-
- switch-1 {
- label = "User Switch 1";
- linux,code = <BTN_1>;
- gpios = <&tca6416 8 GPIO_ACTIVE_LOW>;
- };
-
- switch-2 {
- label = "User Switch 2";
- linux,code = <BTN_2>;
- gpios = <&tca6416 9 GPIO_ACTIVE_LOW>;
- };
-
- switch-3 {
- label = "User Switch 3";
- linux,code = <BTN_3>;
- gpios = <&tca6416 10 GPIO_ACTIVE_LOW>;
- };
-
- switch-4 {
- label = "User Switch 4";
- linux,code = <BTN_4>;
- gpios = <&tca6416 11 GPIO_ACTIVE_LOW>;
- };
-
- switch-5 {
- label = "User Switch 5";
- linux,code = <BTN_5>;
- gpios = <&tca6416 12 GPIO_ACTIVE_LOW>;
- };
-
- switch-6 {
- label = "User Switch 6";
- linux,code = <BTN_6>;
- gpios = <&tca6416 13 GPIO_ACTIVE_LOW>;
- };
-
- switch-7 {
- label = "User Switch 7";
- linux,code = <BTN_7>;
- gpios = <&tca6416 14 GPIO_ACTIVE_LOW>;
- };
-
- switch-8 {
- label = "User Switch 8";
- linux,code = <BTN_8>;
- gpios = <&tca6416 15 GPIO_ACTIVE_LOW>;
- };
- };
-
- gpio-leds {
- compatible = "gpio-leds";
-
- pinctrl-names = "default";
- pinctrl-0 = <&leds_pins>;
-
- user_led_1 {
- label = "am3517evm:green:user_led_1";
- gpios = <&tca6416 7 GPIO_ACTIVE_LOW>;
- default-state = "on";
- };
-
- user_led_2 {
- label = "am3517evm:green:user_led_2";
- gpios = <&tca6416 6 GPIO_ACTIVE_LOW>;
- default-state = "on";
- };
-
- user_led_3 {
- label = "am3517evm:green:user_led_3";
- gpios = <&gpio1 11 GPIO_ACTIVE_HIGH>;
- linux,default-trigger = "mmc0"; /* SD/MMC card activity */
- };
-
- user_led_4 {
- label = "am3517evm:green:user_led_4";
- gpios = <&gpio1 31 GPIO_ACTIVE_HIGH>;
- linux,default-trigger = "heartbeat";
- };
- };
-
- lcd0: display at 0 {
- /* This isn't the exact LCD, but the timings meet spec */
- /* To make it work, set CONFIG_OMAP2_DSS_MIN_FCK_PER_PCK=4 */
- compatible = "newhaven,nhd-4.3-480272ef-atxl";
- label = "15";
- backlight = <&bl>;
- enable-gpios = <&gpio6 16 GPIO_ACTIVE_HIGH>; /* gpio176, lcd INI */
- vcc-supply = <&vdd_io_reg>;
-
- port {
- lcd_in: endpoint {
- remote-endpoint = <&dpi_out>;
- };
- };
- };
-
- bl: backlight {
- compatible = "pwm-backlight";
- pinctrl-names = "default";
- power-supply = <&vdd_io_reg>;
- pinctrl-0 = <&backlight_pins>;
- pwms = <&pwm11 0 5000000 0>;
- brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>;
- default-brightness-level = <7>;
- enable-gpios = <&gpio6 22 GPIO_ACTIVE_HIGH>; /* gpio_182 */
- };
-
- pwm11: pwm-11 {
- compatible = "ti,omap-dmtimer-pwm";
- pinctrl-names = "default";
- pinctrl-0 = <&pwm_pins>;
- ti,timers = <&timer11>;
- #pwm-cells = <3>;
- ti,clock-source = <0x01>;
- };
-
- /* HS USB Host PHY on PORT 1 */
- hsusb1_phy: hsusb1_phy {
- pinctrl-names = "default";
- pinctrl-0 = <&hsusb1_rst_pins>;
- compatible = "usb-nop-xceiv";
- reset-gpios = <&gpio2 25 GPIO_ACTIVE_LOW>; /* gpio_57 */
- #phy-cells = <0>;
- };
-};
-
-&davinci_emac {
- pinctrl-names = "default";
- pinctrl-0 = <ðernet_pins>;
- status = "okay";
-};
-
-&davinci_mdio {
- status = "okay";
-};
-
-&dss {
- status = "okay";
-
- pinctrl-names = "default";
- pinctrl-0 = <&dss_dpi_pins>;
-
- vdds_dsi-supply = <&vdd_io_reg>;
- vdda_video-supply = <&vdd_io_reg>;
-
- port {
- dpi_out: endpoint {
- remote-endpoint = <&lcd_in>;
- data-lines = <16>;
- };
- };
-};
-
-&i2c2 {
- clock-frequency = <400000>;
- /* User DIP swithes [1:8] / User LEDS [1:2] */
- tca6416: gpio at 21 {
- compatible = "ti,tca6416";
- reg = <0x21>;
- gpio-controller;
- #gpio-cells = <2>;
- vcc-supply = <&vdd_io_reg>;
- };
-};
-
-&i2c3 {
- clock-frequency = <400000>;
-};
-
-&mmc1 {
- status = "okay";
- pinctrl-names = "default";
- pinctrl-0 = <&mmc1_pins>;
- vmmc-supply = <&vmmc_fixed>;
- bus-width = <4>;
- wp-gpios = <&gpio4 30 GPIO_ACTIVE_HIGH>; /* gpio_126 */
- cd-gpios = <&gpio4 31 GPIO_ACTIVE_LOW>; /* gpio_127 */
-};
-
-&mmc3 {
- status = "disabled";
-};
-
-&usbhshost {
- pinctrl-names = "default";
- pinctrl-0 = <&hsusb1_pins>;
- port1-mode = "ehci-phy";
-};
-
-&usbhsehci {
- phys = <&hsusb1_phy>;
-};
-
-&omap3_pmx_core {
-
- ethernet_pins: pinmux_ethernet_pins {
- pinctrl-single,pins = <
- OMAP3_CORE1_IOPAD(0x21fe, PIN_INPUT | MUX_MODE0) /* rmii_mdio_data */
- OMAP3_CORE1_IOPAD(0x2200, MUX_MODE0) /* rmii_mdio_clk */
- OMAP3_CORE1_IOPAD(0x2202, PIN_INPUT_PULLDOWN | MUX_MODE0) /* rmii_rxd0 */
- OMAP3_CORE1_IOPAD(0x2204, PIN_INPUT_PULLDOWN | MUX_MODE0) /* rmii_rxd1 */
- OMAP3_CORE1_IOPAD(0x2206, PIN_INPUT_PULLDOWN | MUX_MODE0) /* rmii_crs_dv */
- OMAP3_CORE1_IOPAD(0x2208, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* rmii_rxer */
- OMAP3_CORE1_IOPAD(0x220a, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* rmii_txd0 */
- OMAP3_CORE1_IOPAD(0x220c, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* rmii_txd1 */
- OMAP3_CORE1_IOPAD(0x220e, PIN_OUTPUT_PULLDOWN |MUX_MODE0) /* rmii_txen */
- OMAP3_CORE1_IOPAD(0x2210, PIN_INPUT_PULLDOWN | MUX_MODE0) /* rmii_50mhz_clk */
- >;
- };
-
- leds_pins: pinmux_leds_pins {
- pinctrl-single,pins = <
- OMAP3_WKUP_IOPAD(0x2a24, PIN_OUTPUT_PULLUP | MUX_MODE4) /* jtag_emu0.gpio_11 */
- OMAP3_WKUP_IOPAD(0x2a26, PIN_OUTPUT_PULLUP | MUX_MODE4) /* jtag_emu1.gpio_31 */
- >;
- };
-
- mmc1_pins: pinmux_mmc1_pins {
- pinctrl-single,pins = <
- OMAP3_CORE1_IOPAD(0x2144, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_clk.sdmmc1_clk */
- OMAP3_CORE1_IOPAD(0x2146, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_cmd.sdmmc1_cmd */
- OMAP3_CORE1_IOPAD(0x2148, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat0.sdmmc1_dat0 */
- OMAP3_CORE1_IOPAD(0x214a, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat1.sdmmc1_dat1 */
- OMAP3_CORE1_IOPAD(0x214c, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat2.sdmmc1_dat2 */
- OMAP3_CORE1_IOPAD(0x214e, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat3.sdmmc1_dat3 */
- OMAP3_CORE1_IOPAD(0x2150, PIN_INPUT_PULLUP | MUX_MODE4) /* sdmmc1_dat4.gpio_126 */
- OMAP3_CORE1_IOPAD(0x2152, PIN_INPUT_PULLUP | MUX_MODE4) /* sdmmc1_dat5.gpio_127 */
- >;
- };
-
- pwm_pins: pinmux_pwm_pins {
- pinctrl-single,pins = <
- OMAP3_CORE1_IOPAD(0x21dc, PIN_OUTPUT | MUX_MODE1) /* mcspi2_cs0.gpt11_pwm */
- >;
- };
-
- backlight_pins: pinmux_backlight_pins {
- pinctrl-single,pins = <
- OMAP3_CORE1_IOPAD(0x21de, PIN_OUTPUT | MUX_MODE4) /* mcspi2_cs1.gpio_182 */
- >;
- };
-
- dss_dpi_pins: pinmux_dss_dpi_pins {
- pinctrl-single,pins = <
- OMAP3_CORE1_IOPAD(0x21d2, PIN_OUTPUT | MUX_MODE4) /* mcspi1_cs2.gpio_176 */
- OMAP3_CORE1_IOPAD(0x20d4, PIN_OUTPUT | MUX_MODE0) /* dss_pclk.dss_pclk */
- OMAP3_CORE1_IOPAD(0x20d6, PIN_OUTPUT | MUX_MODE0) /* dss_hsync.dss_hsync */
- OMAP3_CORE1_IOPAD(0x20d8, PIN_OUTPUT | MUX_MODE0) /* dss_vsync.dss_vsync */
- OMAP3_CORE1_IOPAD(0x20da, PIN_OUTPUT | MUX_MODE0) /* dss_acbias.dss_acbias */
- OMAP3_CORE1_IOPAD(0x20dc, PIN_OUTPUT | MUX_MODE0) /* dss_data0.dss_data0 */
- OMAP3_CORE1_IOPAD(0x20de, PIN_OUTPUT | MUX_MODE0) /* dss_data1.dss_data1 */
- OMAP3_CORE1_IOPAD(0x20e0, PIN_OUTPUT | MUX_MODE0) /* dss_data2.dss_data2 */
- OMAP3_CORE1_IOPAD(0x20e2, PIN_OUTPUT | MUX_MODE0) /* dss_data3.dss_data3 */
- OMAP3_CORE1_IOPAD(0x20e4, PIN_OUTPUT | MUX_MODE0) /* dss_data4.dss_data4 */
- OMAP3_CORE1_IOPAD(0x20e6, PIN_OUTPUT | MUX_MODE0) /* dss_data5.dss_data5 */
- OMAP3_CORE1_IOPAD(0x20e8, PIN_OUTPUT | MUX_MODE0) /* dss_data6.dss_data6 */
- OMAP3_CORE1_IOPAD(0x20ea, PIN_OUTPUT | MUX_MODE0) /* dss_data7.dss_data7 */
- OMAP3_CORE1_IOPAD(0x20ec, PIN_OUTPUT | MUX_MODE0) /* dss_data8.dss_data8 */
- OMAP3_CORE1_IOPAD(0x20ee, PIN_OUTPUT | MUX_MODE0) /* dss_data9.dss_data9 */
- OMAP3_CORE1_IOPAD(0x20f0, PIN_OUTPUT | MUX_MODE0) /* dss_data10.dss_data10 */
- OMAP3_CORE1_IOPAD(0x20f2, PIN_OUTPUT | MUX_MODE0) /* dss_data11.dss_data11 */
- OMAP3_CORE1_IOPAD(0x20f4, PIN_OUTPUT | MUX_MODE0) /* dss_data12.dss_data12 */
- OMAP3_CORE1_IOPAD(0x20f6, PIN_OUTPUT | MUX_MODE0) /* dss_data13.dss_data13 */
- OMAP3_CORE1_IOPAD(0x20f8, PIN_OUTPUT | MUX_MODE0) /* dss_data14.dss_data14 */
- OMAP3_CORE1_IOPAD(0x20fa, PIN_OUTPUT | MUX_MODE0) /* dss_data15.dss_data15 */
- >;
- };
-
- hsusb1_rst_pins: pinmux_hsusb1_rst_pins {
- pinctrl-single,pins = <
- OMAP3_CORE1_IOPAD(0x20ba, PIN_OUTPUT | MUX_MODE4) /* gpmc_ncs6.gpio_57 */
- >;
- };
-};
-
-&omap3_pmx_core2 {
-
- hsusb1_pins: pinmux_hsusb1_pins {
- pinctrl-single,pins = <
- OMAP3430_CORE2_IOPAD(0x25d8, PIN_OUTPUT | MUX_MODE3) /* etk_clk.hsusb1_stp */
- OMAP3430_CORE2_IOPAD(0x25da, PIN_OUTPUT | MUX_MODE3) /* etk_ctl.hsusb1_clk */
- OMAP3430_CORE2_IOPAD(0x25ec, PIN_INPUT | MUX_MODE3) /* etk_d8.hsusb1_dir */
- OMAP3430_CORE2_IOPAD(0x25ee, PIN_INPUT | MUX_MODE3) /* etk_d9.hsusb1_nxt */
- OMAP3430_CORE2_IOPAD(0x25dc, PIN_INPUT | MUX_MODE3) /* etk_d0.hsusb1_data0 */
- OMAP3430_CORE2_IOPAD(0x25de, PIN_INPUT | MUX_MODE3) /* etk_d1.hsusb1_data1 */
- OMAP3430_CORE2_IOPAD(0x25e0, PIN_INPUT | MUX_MODE3) /* etk_d2.hsusb1_data2 */
- OMAP3430_CORE2_IOPAD(0x25ea, PIN_INPUT | MUX_MODE3) /* etk_d7.hsusb1_data3 */
- OMAP3430_CORE2_IOPAD(0x25e4, PIN_INPUT | MUX_MODE3) /* etk_d4.hsusb1_data4 */
- OMAP3430_CORE2_IOPAD(0x25e6, PIN_INPUT | MUX_MODE3) /* etk_d5.hsusb1_data5 */
- OMAP3430_CORE2_IOPAD(0x25e8, PIN_INPUT | MUX_MODE3) /* etk_d6.hsusb1_data6 */
- OMAP3430_CORE2_IOPAD(0x25e2, PIN_INPUT | MUX_MODE3) /* etk_d3.hsusb1_data7 */
- >;
- };
-};
diff --git a/arch/arm/dts/am3517-som.dtsi b/arch/arm/dts/am3517-som.dtsi
deleted file mode 100644
index 8b669e2eaf..0000000000
--- a/arch/arm/dts/am3517-som.dtsi
+++ /dev/null
@@ -1,234 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (C) 2016 Derald D. Woods <woods.technical at gmail.com>
- *
- * Based on am3517-evm.dts
- */
-
-/ {
- cpus {
- cpu at 0 {
- cpu0-supply = <&vdd_core_reg>;
- };
- };
-
- wl12xx_buffer: wl12xx_buf {
- compatible = "regulator-fixed";
- regulator-name = "wl1271_buf";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- pinctrl-names = "default";
- pinctrl-0 = <&wl12xx_buffer_pins>;
- gpio = <&gpio5 1 GPIO_ACTIVE_LOW>; /* gpio 129 */
- regulator-always-on;
- vin-supply = <&vdd_1v8_reg>;
- };
-
- wl12xx_vmmc2: wl12xx_vmmc2 {
- compatible = "regulator-fixed";
- regulator-name = "vwl1271";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- pinctrl-names = "default";
- pinctrl-0 = <&wl12xx_wkup_pins>;
- gpio = <&gpio1 3 GPIO_ACTIVE_HIGH >; /* gpio 3 */
- startup-delay-us = <70000>;
- enable-active-high;
- regulator-always-on;
- vin-supply = <&wl12xx_buffer>;
- };
-};
-
-&gpmc {
- ranges = <0 0 0x30000000 0x1000000>; /* CS0: 16MB for NAND */
-
- nand at 0,0 {
- compatible = "ti,omap2-nand";
- linux,mtd-name = "micron,mt29f4g16abchch";
- reg = <0 0 4>; /* CS0, offset 0, IO size 4 */
- nand-bus-width = <16>;
- ti,nand-ecc-opt = "bch8";
- gpmc,sync-clk-ps = <0>;
- gpmc,cs-on-ns = <0>;
- gpmc,cs-rd-off-ns = <44>;
- gpmc,cs-wr-off-ns = <44>;
- gpmc,adv-on-ns = <6>;
- gpmc,adv-rd-off-ns = <34>;
- gpmc,adv-wr-off-ns = <44>;
- gpmc,we-off-ns = <40>;
- gpmc,oe-off-ns = <54>;
- gpmc,access-ns = <64>;
- gpmc,rd-cycle-ns = <82>;
- gpmc,wr-cycle-ns = <82>;
- gpmc,wr-access-ns = <40>;
- gpmc,wr-data-mux-bus-ns = <0>;
- gpmc,device-width = <2>;
- #address-cells = <1>;
- #size-cells = <1>;
- };
-};
-
-&i2c1 {
- clock-frequency = <400000>;
-
- s35390a: s35390a at 30 {
- compatible = "sii,s35390a";
- reg = <0x30>;
-
- pinctrl-names = "default";
- pinctrl-0 = <&rtc_pins>;
- interrupts-extended = <&gpio2 23 IRQ_TYPE_EDGE_FALLING>; /* gpio_55 */
- };
-
- tps: tps65023 at 48 {
- compatible = "ti,tps65023";
- reg = <0x48>;
-
- regulators {
- vdd_core_reg: VDCDC1 {
- regulator-name = "vdd_core";
- regulator-always-on;
- regulator-min-microvolt = <1200000>;
- regulator-max-microvolt = <1200000>;
- };
-
- vdd_io_reg: VDCDC2 {
- regulator-name = "vdd_io";
- regulator-always-on;
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- };
-
- vdd_1v8_reg: VDCDC3 {
- regulator-name = "vdd_1v8";
- regulator-always-on;
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- };
-
- vdd_usb18_reg: LDO1 {
- regulator-name = "vdd_usb18";
- regulator-always-on;
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- };
-
- vdd_usb33_reg: LDO2 {
- regulator-name = "vdd_usb33";
- regulator-always-on;
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- };
- };
- };
-
- touchscreen: tsc2004 at 4b {
- compatible = "ti,tsc2004";
- reg = <0x4b>;
-
- vio-supply = <&vdd_io_reg>;
-
- pinctrl-names = "default";
- pinctrl-0 = <&tsc2004_pins>;
- interrupts-extended = <&gpio3 1 IRQ_TYPE_EDGE_RISING>; /* gpio_65 */
-
- touchscreen-fuzz-x = <4>;
- touchscreen-fuzz-y = <7>;
- touchscreen-fuzz-pressure = <2>;
- touchscreen-size-x = <480>;
- touchscreen-size-y = <272>;
- touchscreen-max-pressure = <2048>;
-
- ti,x-plate-ohms = <280>;
- ti,esd-recovery-timeout-ms = <8000>;
- };
-};
-
-&mmc2 {
- interrupts-extended = <&intc 86 /* &omap3_pmx_core 0x12c */>;
-
- status = "okay";
- pinctrl-names = "default";
- pinctrl-0 = <&mmc2_pins>;
- vmmc-supply = <&wl12xx_vmmc2>;
- non-removable;
- bus-width = <4>;
- cap-power-off-card;
- #address-cells = <1>;
- #size-cells = <0>;
- wlcore: wlcore at 2 {
- compatible = "ti,wl1271";
- reg = <2>;
- interrupt-parent = <&gpio6>;
- interrupts = <10 IRQ_TYPE_EDGE_RISING>; /* gpio_170 */
- ref-clock-frequency = <26000000>;
- tcxo-clock-frequency = <26000000>;
- };
-};
-
-&uart2 {
- pinctrl-names = "default";
- pinctrl-0 = <&uart2_pins>;
-
- bluetooth {
- compatible = "ti,wl1271-st";
- enable-gpios = <&gpio2 24 GPIO_ACTIVE_HIGH>; /* gpio 56 */
- max-speed = <3000000>;
- };
-};
-
-&omap3_pmx_core {
-
- wl12xx_buffer_pins: pinmux_wl12xx_buffer_pins {
- pinctrl-single,pins = <
- OMAP3_CORE1_IOPAD(0x2156, PIN_OUTPUT | MUX_MODE4) /* mmc1_dat7.gpio_129 */
- >;
- };
-
- mmc2_pins: pinmux_mmc2_pins {
- pinctrl-single,pins = <
- OMAP3_CORE1_IOPAD(0x2158, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc2_clk.mmc2_clk */
- OMAP3_CORE1_IOPAD(0x215a, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc2_cmd.mmc2_cmd */
- OMAP3_CORE1_IOPAD(0x215c, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc2_dat0.mmc2_dat0 */
- OMAP3_CORE1_IOPAD(0x215e, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc2_dat1.mmc2_dat1 */
- OMAP3_CORE1_IOPAD(0x2160, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc2_dat2.mmc2_dat2 */
- OMAP3_CORE1_IOPAD(0x2162, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc2_dat3.mmc2_dat3 */
- OMAP3_CORE1_IOPAD(0x2164, PIN_OUTPUT | MUX_MODE1) /* mmc2_dat4.mmc2_dir_dat0 */
- OMAP3_CORE1_IOPAD(0x2166, PIN_OUTPUT | MUX_MODE1) /* mmc2_dat5.mmc2_dir_dat1 */
- OMAP3_CORE1_IOPAD(0x2168, PIN_OUTPUT | MUX_MODE1) /* mmc2_dat6.mmc2_dir_cmd */
- OMAP3_CORE1_IOPAD(0x216a, PIN_INPUT | MUX_MODE1) /* mmc2_dat7.mmc2_clkin */
- OMAP3_CORE1_IOPAD(0x21c6, PIN_INPUT_PULLUP | MUX_MODE4) /* hdq_sio.gpio_170 */
- >;
- };
-
- rtc_pins: pinmux_rtc_pins {
- pinctrl-single,pins = <
- OMAP3_CORE1_IOPAD(0x20b6, PIN_INPUT_PULLUP | MUX_MODE4) /* gpmc_ncs4.gpio_55 */
- >;
- };
-
- tsc2004_pins: pinmux_tsc2004_pins {
- pinctrl-single,pins = <
- OMAP3_CORE1_IOPAD(0x20d2, PIN_INPUT | MUX_MODE4) /* gpmc_wait3.gpio_65 */
- >;
- };
-
- uart2_pins: pinmux_uart2_pins {
- pinctrl-single,pins = <
- OMAP3_CORE1_IOPAD(0x2174, PIN_INPUT_PULLUP | MUX_MODE0) /* uart2_cts */
- OMAP3_CORE1_IOPAD(0x2176, PIN_OUTPUT_PULLUP | MUX_MODE0) /* uart2_rts */
- OMAP3_CORE1_IOPAD(0x2178, PIN_OUTPUT | MUX_MODE0) /* uart2_tx */
- OMAP3_CORE1_IOPAD(0x217a, PIN_INPUT | MUX_MODE0) /* uart2_rx */
- OMAP3_CORE1_IOPAD(0x20b8, PIN_INPUT | MUX_MODE0) /* gpio_56 */
- >;
- };
-};
-
-&omap3_pmx_wkup {
-
- wl12xx_wkup_pins: pinmux_wl12xx_wkup_pins {
- pinctrl-single,pins = <
- OMAP3_WKUP_IOPAD(0x2a0c, PIN_OUTPUT | MUX_MODE4) /* sys_boot1.gpio_3 */
- >;
- };
-};
diff --git a/arch/arm/dts/am3517.dtsi b/arch/arm/dts/am3517.dtsi
deleted file mode 100644
index 2633fae14b..0000000000
--- a/arch/arm/dts/am3517.dtsi
+++ /dev/null
@@ -1,109 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Device Tree Source for am3517 SoC
- *
- * Copyright (C) 2013 Texas Instruments Incorporated - https://www.ti.com/
- */
-
-#include "omap3.dtsi"
-
-/ {
- aliases {
- serial3 = &uart4;
- can = &hecc;
- };
-
- ocp at 68000000 {
- am35x_otg_hs: am35x_otg_hs at 5c040000 {
- compatible = "ti,omap3-musb";
- ti,hwmods = "am35x_otg_hs";
- status = "disabled";
- reg = <0x5c040000 0x1000>;
- interrupts = <71>;
- interrupt-names = "mc";
- };
-
- davinci_emac: ethernet at 5c000000 {
- compatible = "ti,am3517-emac";
- ti,hwmods = "davinci_emac";
- status = "disabled";
- reg = <0x5c000000 0x30000>;
- interrupts = <67 68 69 70>;
- syscon = <&scm_conf>;
- ti,davinci-ctrl-reg-offset = <0x10000>;
- ti,davinci-ctrl-mod-reg-offset = <0>;
- ti,davinci-ctrl-ram-offset = <0x20000>;
- ti,davinci-ctrl-ram-size = <0x2000>;
- ti,davinci-rmii-en = /bits/ 8 <1>;
- local-mac-address = [ 00 00 00 00 00 00 ];
- clocks = <&emac_ick>;
- clock-names = "ick";
- };
-
- davinci_mdio: mdio at 5c030000 {
- compatible = "ti,davinci_mdio";
- ti,hwmods = "davinci_mdio";
- status = "disabled";
- reg = <0x5c030000 0x1000>;
- bus_freq = <1000000>;
- #address-cells = <1>;
- #size-cells = <0>;
- clocks = <&emac_fck>;
- clock-names = "fck";
- };
-
- uart4: serial at 4809e000 {
- compatible = "ti,omap3-uart";
- ti,hwmods = "uart4";
- status = "disabled";
- reg = <0x4809e000 0x400>;
- interrupts = <84>;
- dmas = <&sdma 55 &sdma 54>;
- dma-names = "tx", "rx";
- clock-frequency = <48000000>;
- };
-
- omap3_pmx_core2: pinmux at 480025d8 {
- compatible = "ti,omap3-padconf", "pinctrl-single";
- reg = <0x480025d8 0x24>;
- #address-cells = <1>;
- #size-cells = <0>;
- #pinctrl-cells = <1>;
- #interrupt-cells = <1>;
- interrupt-controller;
- pinctrl-single,register-width = <16>;
- pinctrl-single,function-mask = <0xff1f>;
- };
-
- hecc: can at 5c050000 {
- compatible = "ti,am3517-hecc";
- status = "disabled";
- reg = <0x5c050000 0x80>,
- <0x5c053000 0x180>,
- <0x5c052000 0x200>;
- reg-names = "hecc", "hecc-ram", "mbx";
- interrupts = <24>;
- clocks = <&hecc_ck>;
- };
- };
-};
-
-/* Table Table 5-79 of the TRM shows 480ab000 is reserved */
-&usb_otg_hs {
- status = "disabled";
-};
-
-&iva {
- status = "disabled";
-};
-
-&mailbox {
- status = "disabled";
-};
-
-&mmu_isp {
- status = "disabled";
-};
-
-/include/ "am35xx-clocks.dtsi"
-/include/ "omap36xx-am35xx-omap3430es2plus-clocks.dtsi"
diff --git a/arch/arm/dts/am35xx-clocks.dtsi b/arch/arm/dts/am35xx-clocks.dtsi
deleted file mode 100644
index 220d0a5279..0000000000
--- a/arch/arm/dts/am35xx-clocks.dtsi
+++ /dev/null
@@ -1,125 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Device Tree Source for OMAP3 clock data
- *
- * Copyright (C) 2013 Texas Instruments, Inc.
- */
-&scm_clocks {
- emac_ick: emac_ick at 32c {
- #clock-cells = <0>;
- compatible = "ti,am35xx-gate-clock";
- clocks = <&ipss_ick>;
- reg = <0x032c>;
- ti,bit-shift = <1>;
- };
-
- emac_fck: emac_fck at 32c {
- #clock-cells = <0>;
- compatible = "ti,gate-clock";
- clocks = <&rmii_ck>;
- reg = <0x032c>;
- ti,bit-shift = <9>;
- };
-
- vpfe_ick: vpfe_ick at 32c {
- #clock-cells = <0>;
- compatible = "ti,am35xx-gate-clock";
- clocks = <&ipss_ick>;
- reg = <0x032c>;
- ti,bit-shift = <2>;
- };
-
- vpfe_fck: vpfe_fck at 32c {
- #clock-cells = <0>;
- compatible = "ti,gate-clock";
- clocks = <&pclk_ck>;
- reg = <0x032c>;
- ti,bit-shift = <10>;
- };
-
- hsotgusb_ick_am35xx: hsotgusb_ick_am35xx at 32c {
- #clock-cells = <0>;
- compatible = "ti,am35xx-gate-clock";
- clocks = <&ipss_ick>;
- reg = <0x032c>;
- ti,bit-shift = <0>;
- };
-
- hsotgusb_fck_am35xx: hsotgusb_fck_am35xx at 32c {
- #clock-cells = <0>;
- compatible = "ti,gate-clock";
- clocks = <&sys_ck>;
- reg = <0x032c>;
- ti,bit-shift = <8>;
- };
-
- hecc_ck: hecc_ck at 32c {
- #clock-cells = <0>;
- compatible = "ti,am35xx-gate-clock";
- clocks = <&sys_ck>;
- reg = <0x032c>;
- ti,bit-shift = <3>;
- };
-};
-&cm_clocks {
- ipss_ick: ipss_ick at a10 {
- #clock-cells = <0>;
- compatible = "ti,am35xx-interface-clock";
- clocks = <&core_l3_ick>;
- reg = <0x0a10>;
- ti,bit-shift = <4>;
- };
-
- rmii_ck: rmii_ck {
- #clock-cells = <0>;
- compatible = "fixed-clock";
- clock-frequency = <50000000>;
- };
-
- pclk_ck: pclk_ck {
- #clock-cells = <0>;
- compatible = "fixed-clock";
- clock-frequency = <27000000>;
- };
-
- uart4_ick_am35xx: uart4_ick_am35xx at a10 {
- #clock-cells = <0>;
- compatible = "ti,omap3-interface-clock";
- clocks = <&core_l4_ick>;
- reg = <0x0a10>;
- ti,bit-shift = <23>;
- };
-
- uart4_fck_am35xx: uart4_fck_am35xx at a00 {
- #clock-cells = <0>;
- compatible = "ti,wait-gate-clock";
- clocks = <&core_48m_fck>;
- reg = <0x0a00>;
- ti,bit-shift = <23>;
- };
-};
-
-&cm_clockdomains {
- core_l3_clkdm: core_l3_clkdm {
- compatible = "ti,clockdomain";
- clocks = <&sdrc_ick>, <&ipss_ick>, <&emac_ick>, <&vpfe_ick>,
- <&hsotgusb_ick_am35xx>, <&hsotgusb_fck_am35xx>,
- <&hecc_ck>;
- };
-
- core_l4_clkdm: core_l4_clkdm {
- compatible = "ti,clockdomain";
- clocks = <&cpefuse_fck>, <&ts_fck>, <&usbtll_fck>,
- <&usbtll_ick>, <&mmchs3_ick>, <&mmchs3_fck>,
- <&mmchs2_fck>, <&mmchs1_fck>, <&i2c3_fck>, <&i2c2_fck>,
- <&i2c1_fck>, <&mcspi4_fck>, <&mcspi3_fck>,
- <&mcspi2_fck>, <&mcspi1_fck>, <&uart2_fck>,
- <&uart1_fck>, <&hdq_fck>, <&mmchs2_ick>, <&mmchs1_ick>,
- <&hdq_ick>, <&mcspi4_ick>, <&mcspi3_ick>,
- <&mcspi2_ick>, <&mcspi1_ick>, <&i2c3_ick>, <&i2c2_ick>,
- <&i2c1_ick>, <&uart2_ick>, <&uart1_ick>, <&gpt11_ick>,
- <&gpt10_ick>, <&mcbsp5_ick>, <&mcbsp1_ick>,
- <&omapctrl_ick>, <&aes2_ick>, <&sha12_ick>,
- <&uart4_ick_am35xx>, <&uart4_fck_am35xx>;
- };
-};
diff --git a/configs/am3517_evm_defconfig b/configs/am3517_evm_defconfig
index 66bb4f6371..70498ca7fb 100644
--- a/configs/am3517_evm_defconfig
+++ b/configs/am3517_evm_defconfig
@@ -8,7 +8,7 @@ CONFIG_TI_COMMON_CMD_OPTIONS=y
CONFIG_NR_DRAM_BANKS=2
CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x4020ff00
-CONFIG_DEFAULT_DEVICE_TREE="am3517-evm"
+CONFIG_DEFAULT_DEVICE_TREE="ti/omap/am3517-evm"
CONFIG_SPL_TEXT_BASE=0x40200000
CONFIG_TARGET_AM3517_EVM=y
CONFIG_EMIF4=y
@@ -58,6 +58,7 @@ CONFIG_MTDPARTS_DEFAULT="mtdparts=omap2-nand.0:512k(MLO),1920k(u-boot),256k(u-bo
CONFIG_CMD_UBI=y
CONFIG_OF_CONTROL=y
CONFIG_SPL_OF_CONTROL=y
+CONFIG_OF_UPSTREAM=y
CONFIG_ENV_OVERWRITE=y
# CONFIG_ENV_IS_IN_FAT is not set
CONFIG_ENV_IS_IN_NAND=y
--
2.43.0
More information about the U-Boot
mailing list