[PATCH v2 0/3] dt-bindings: arm: bcm: raspberrypi,bcm2835-firmware: Drive-by fixes

[Stefan Wahren]

Hi,

[add Peter and Ivan]

Am 26.03.24 um 20:58 schrieb Laurent Pinchart:
> Hello,
>
> This small series includes a few drive-by fixes for DT validation
> errors.
>
> The first patch has been posted previously in v1 ([1], and now addresses
> a small review comment. I think it's good to go.
>
> The next two patches address the same issue as "[PATCH 1/2] dt-bindings:
> arm: bcm: raspberrypi,bcm2835-firmware: Add missing properties" ([2]),
> but this time with a (hopefully) correct approach. Patch 2/3 starts by
> fixing the raspberrypi-bcm2835-firmware driver, removing the need for DT
> properties that are specified in bcm2835-rpi.dtsi but not documented in
> the corresponding bindings. Patch 3/3 can then drop those properties,
> getting rid of the warnings.
since this series drops properties from the device tree, does anyone
have the chance to test it with a recent U-Boot?
>
> [1] https://lore.kernel.org/linux-arm-kernel/20240326004902.17054-3-laurent.pinchart@ideasonboard.com/
> [2] https://lore.kernel.org/linux-arm-kernel/20240326004902.17054-2-laurent.pinchart@ideasonboard.com/
>
> Laurent Pinchart (3):
>    dt-bindings: arm: bcm: raspberrypi,bcm2835-firmware: Add gpio child
>      node
>    firmware: raspberrypi: Use correct device for DMA mappings
>    ARM: dts: bcm283x: Drop unneeded properties in the bcm2835-firmware
>      node
>
>   .../arm/bcm/raspberrypi,bcm2835-firmware.yaml | 30 +++++++++++++++++++
>   .../gpio/raspberrypi,firmware-gpio.txt        | 30 -------------------
>   arch/arm/boot/dts/broadcom/bcm2835-rpi.dtsi   |  4 ---
>   drivers/firmware/raspberrypi.c                |  7 +++--
>   4 files changed, 34 insertions(+), 37 deletions(-)
>   delete mode 100644 Documentation/devicetree/bindings/gpio/raspberrypi,firmware-gpio.txt
>