[PATCH u-boot-mvebu v3 08/18] arm: mvebu: spl: Do not build mvebu-reset in SPL

[Marek Behún]

Commit 35e29e89a386 ("arm: mvebu: Implement simple mvebu-reset driver
for enabling/disabling PCIe ports") made it so that the mvebu reset
driver for enabling/disabling PCIe ports is build if CONFIG_DM_RESET is
enabled. This is because PCI_MVEBU depends on DM_RESET.

But the driver should not be built for SPL. Indeed the PCI_MVEBU driver
is not supported in SPL now, and so the mvebu-reset driver is not needed.

Signed-off-by: Marek Behún <kabel at kernel.org>
---
 arch/arm/mach-mvebu/Makefile | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/arch/arm/mach-mvebu/Makefile b/arch/arm/mach-mvebu/Makefile
index 0584ed2be5..ef790d97fe 100644
--- a/arch/arm/mach-mvebu/Makefile
+++ b/arch/arm/mach-mvebu/Makefile
@@ -22,13 +22,14 @@ else # CONFIG_ARCH_KIRKWOOD
 obj-y	= cpu.o
 obj-y	+= dram.o
 obj-y	+= lowlevel.o
-obj-$(CONFIG_DM_RESET) += system-controller.o
 ifndef CONFIG_SPL_BUILD
 obj-$(CONFIG_ARMADA_375) += ../../../drivers/ddr/marvell/axp/xor.o
 obj-$(CONFIG_ARMADA_38X) += ../../../drivers/ddr/marvell/a38x/xor.o
 obj-$(CONFIG_ARMADA_XP) += ../../../drivers/ddr/marvell/axp/xor.o
 obj-$(CONFIG_ARMADA_MSYS) += ../../../drivers/ddr/marvell/axp/xor.o
 
+obj-$(CONFIG_DM_RESET) += system-controller.o
+
 ifdef CONFIG_ARMADA_38X
 obj-$(CONFIG_MVEBU_EFUSE) += efuse.o
 endif
-- 
2.43.2