[PATCH] mx6cuboxi: Do not print devicetree model

Fabio Estevam festevam at gmail.com
Wed Mar 27 18:03:59 CET 2024


The mx6cuboxi_defconfig target supports several board
variants. All of these variants use the hummingboard devicetree in U-Boot.

Currently, the devicetree model as well as the board variant name
are shown:

U-Boot 2024.04-rc5-00003-g774ec4fda8 (Mar 27 2024 - 16:48:35 +0100)

...
Model: SolidRun HummingBoard2 Dual/Quad (1.5som+emmc)
Board: MX6 Cubox-i
...

Printing the devicetree model that is used internally by U-Boot
may confuse users.

Unselect the CONFIG_DISPLAY_BOARDINFO option so that only the
board name is printed instead.

Signed-off-by: Fabio Estevam <festevam at gmail.com>
---
 configs/mx6cuboxi_defconfig | 1 +
 1 file changed, 1 insertion(+)

diff --git a/configs/mx6cuboxi_defconfig b/configs/mx6cuboxi_defconfig
index 27ceb22599a6..e3aba715aa58 100644
--- a/configs/mx6cuboxi_defconfig
+++ b/configs/mx6cuboxi_defconfig
@@ -28,6 +28,7 @@ CONFIG_BOOTCOMMAND="run findfdt; run finduuid; run distro_bootcmd"
 CONFIG_USE_PREBOOT=y
 CONFIG_PREBOOT="if hdmidet; then usb start; setenv stdin  serial,usbkbd; setenv stdout serial,vidconsole; setenv stderr serial,vidconsole; else setenv stdin  serial; setenv stdout serial; setenv stderr serial; fi;"
 CONFIG_SYS_PBSIZE=532
+# CONFIG_DISPLAY_BOARDINFO is not set
 CONFIG_BOARD_EARLY_INIT_F=y
 CONFIG_SPL_SYS_MALLOC=y
 CONFIG_SPL_FS_EXT4=y
-- 
2.34.1



More information about the U-Boot mailing list