[PATCH 2/4] imx: imx8mm_evk: convert to OF_UPSTREAM

Peng Fan (OSS) peng.fan at oss.nxp.com
Thu Mar 28 03:26:35 CET 2024


From: Peng Fan <peng.fan at nxp.com>

Convert i.MX8MM EVK to OF_UPSTREAM

Signed-off-by: Peng Fan <peng.fan at nxp.com>
---
 arch/arm/dts/imx8mm-evk.dts       | 128 --------
 arch/arm/dts/imx8mm-evk.dtsi      | 615 --------------------------------------
 arch/arm/mach-imx/imx8m/Kconfig   |   1 +
 configs/imx8mm_evk_defconfig      |   2 +-
 configs/imx8mm_evk_fspi_defconfig |   2 +-
 5 files changed, 3 insertions(+), 745 deletions(-)

diff --git a/arch/arm/dts/imx8mm-evk.dts b/arch/arm/dts/imx8mm-evk.dts
deleted file mode 100644
index a2b24d4d4e3..00000000000
--- a/arch/arm/dts/imx8mm-evk.dts
+++ /dev/null
@@ -1,128 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Copyright 2019-2020 NXP
- */
-
-/dts-v1/;
-
-#include <dt-bindings/usb/pd.h>
-#include "imx8mm-evk.dtsi"
-
-/ {
-	model = "FSL i.MX8MM EVK board";
-	compatible = "fsl,imx8mm-evk", "fsl,imx8mm";
-
-	aliases {
-		spi0 = &flexspi;
-	};
-};
-
-&ddrc {
-	operating-points-v2 = <&ddrc_opp_table>;
-
-	ddrc_opp_table: opp-table {
-		compatible = "operating-points-v2";
-
-		opp-25M {
-			opp-hz = /bits/ 64 <25000000>;
-		};
-
-		opp-100M {
-			opp-hz = /bits/ 64 <100000000>;
-		};
-
-		opp-750M {
-			opp-hz = /bits/ 64 <750000000>;
-		};
-	};
-};
-
-&flexspi {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_flexspi>;
-	status = "okay";
-
-	flash at 0 {
-		reg = <0>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "jedec,spi-nor";
-		spi-max-frequency = <80000000>;
-		spi-tx-bus-width = <1>;
-		spi-rx-bus-width = <4>;
-	};
-};
-
-&usdhc3 {
-	assigned-clocks = <&clk IMX8MM_CLK_USDHC3_ROOT>;
-	assigned-clock-rates = <400000000>;
-	pinctrl-names = "default", "state_100mhz", "state_200mhz";
-	pinctrl-0 = <&pinctrl_usdhc3>;
-	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
-	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
-	bus-width = <8>;
-	non-removable;
-	status = "okay";
-};
-
-&iomuxc {
-	pinctrl_flexspi: flexspigrp {
-		fsl,pins = <
-			MX8MM_IOMUXC_NAND_ALE_QSPI_A_SCLK               0x1c2
-			MX8MM_IOMUXC_NAND_CE0_B_QSPI_A_SS0_B            0x82
-			MX8MM_IOMUXC_NAND_DATA00_QSPI_A_DATA0           0x82
-			MX8MM_IOMUXC_NAND_DATA01_QSPI_A_DATA1           0x82
-			MX8MM_IOMUXC_NAND_DATA02_QSPI_A_DATA2           0x82
-			MX8MM_IOMUXC_NAND_DATA03_QSPI_A_DATA3           0x82
-		>;
-	};
-
-	pinctrl_usdhc3: usdhc3grp {
-		fsl,pins = <
-			MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK               0x190
-			MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD               0x1d0
-			MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0           0x1d0
-			MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1           0x1d0
-			MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2           0x1d0
-			MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2           0x1d0
-			MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3           0x1d0
-			MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4             0x1d0
-			MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5            0x1d0
-			MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6            0x1d0
-			MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7              0x1d0
-			MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE           0x190
-		>;
-	};
-
-	pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp {
-		fsl,pins = <
-			MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK               0x194
-			MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD               0x1d4
-			MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0           0x1d4
-			MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1           0x1d4
-			MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2           0x1d4
-			MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3           0x1d4
-			MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4             0x1d4
-			MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5            0x1d4
-			MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6            0x1d4
-			MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7              0x1d4
-			MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE           0x194
-		>;
-	};
-
-	pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp {
-		fsl,pins = <
-			MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK               0x196
-			MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD               0x1d6
-			MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0           0x1d6
-			MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1           0x1d6
-			MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2           0x1d6
-			MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3           0x1d6
-			MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4             0x1d6
-			MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5            0x1d6
-			MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6            0x1d6
-			MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7              0x1d6
-			MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE           0x196
-		>;
-	};
-};
diff --git a/arch/arm/dts/imx8mm-evk.dtsi b/arch/arm/dts/imx8mm-evk.dtsi
deleted file mode 100644
index 7d6317d95b1..00000000000
--- a/arch/arm/dts/imx8mm-evk.dtsi
+++ /dev/null
@@ -1,615 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Copyright 2020 NXP
- */
-
-/dts-v1/;
-
-#include <dt-bindings/phy/phy-imx8-pcie.h>
-#include <dt-bindings/usb/pd.h>
-#include "imx8mm.dtsi"
-
-/ {
-	chosen {
-		stdout-path = &uart2;
-	};
-
-	memory at 40000000 {
-		device_type = "memory";
-		reg = <0x0 0x40000000 0 0x80000000>;
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_gpio_led>;
-
-		status {
-			label = "status";
-			gpios = <&gpio3 16 GPIO_ACTIVE_HIGH>;
-			default-state = "on";
-		};
-	};
-
-	pcie0_refclk: pcie0-refclk {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <100000000>;
-	};
-
-	reg_pcie0: regulator-pcie {
-		compatible = "regulator-fixed";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_pcie0_reg>;
-		regulator-name = "MPCIE_3V3";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		gpio = <&gpio1 5 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-	};
-
-	reg_usdhc2_vmmc: regulator-usdhc2 {
-		compatible = "regulator-fixed";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_reg_usdhc2_vmmc>;
-		regulator-name = "VSD_3V3";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-	};
-
-	backlight: backlight {
-		compatible = "pwm-backlight";
-		pwms = <&pwm1 0 5000000 0>;
-		brightness-levels = <0 255>;
-		num-interpolated-steps = <255>;
-		default-brightness-level = <250>;
-	};
-
-	ir-receiver {
-		compatible = "gpio-ir-receiver";
-		gpios = <&gpio1 13 GPIO_ACTIVE_LOW>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_ir>;
-		linux,autosuspend-period = <125>;
-	};
-
-	audio_codec_bt_sco: audio-codec-bt-sco {
-		compatible = "linux,bt-sco";
-		#sound-dai-cells = <1>;
-	};
-
-	wm8524: audio-codec {
-		#sound-dai-cells = <0>;
-		compatible = "wlf,wm8524";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_gpio_wlf>;
-		wlf,mute-gpios = <&gpio5 21 GPIO_ACTIVE_LOW>;
-	};
-
-	sound-bt-sco {
-		compatible = "simple-audio-card";
-		simple-audio-card,name = "bt-sco-audio";
-		simple-audio-card,format = "dsp_a";
-		simple-audio-card,bitclock-inversion;
-		simple-audio-card,frame-master = <&btcpu>;
-		simple-audio-card,bitclock-master = <&btcpu>;
-
-		btcpu: simple-audio-card,cpu {
-			sound-dai = <&sai2>;
-			dai-tdm-slot-num = <2>;
-			dai-tdm-slot-width = <16>;
-		};
-
-		simple-audio-card,codec {
-			sound-dai = <&audio_codec_bt_sco 1>;
-		};
-	};
-
-	sound-wm8524 {
-		compatible = "simple-audio-card";
-		simple-audio-card,name = "wm8524-audio";
-		simple-audio-card,format = "i2s";
-		simple-audio-card,frame-master = <&cpudai>;
-		simple-audio-card,bitclock-master = <&cpudai>;
-		simple-audio-card,widgets =
-			"Line", "Left Line Out Jack",
-			"Line", "Right Line Out Jack";
-		simple-audio-card,routing =
-			"Left Line Out Jack", "LINEVOUTL",
-			"Right Line Out Jack", "LINEVOUTR";
-
-		cpudai: simple-audio-card,cpu {
-			sound-dai = <&sai3>;
-			dai-tdm-slot-num = <2>;
-			dai-tdm-slot-width = <32>;
-		};
-
-		simple-audio-card,codec {
-			sound-dai = <&wm8524>;
-			clocks = <&clk IMX8MM_CLK_SAI3_ROOT>;
-		};
-	};
-};
-
-&A53_0 {
-	cpu-supply = <&buck2_reg>;
-};
-
-&A53_1 {
-	cpu-supply = <&buck2_reg>;
-};
-
-&A53_2 {
-	cpu-supply = <&buck2_reg>;
-};
-
-&A53_3 {
-	cpu-supply = <&buck2_reg>;
-};
-
-&fec1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_fec1>;
-	phy-mode = "rgmii-id";
-	phy-handle = <&ethphy0>;
-	fsl,magic-packet;
-	status = "okay";
-
-	mdio {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		ethphy0: ethernet-phy at 0 {
-			compatible = "ethernet-phy-ieee802.3-c22";
-			reg = <0>;
-			reset-gpios = <&gpio4 22 GPIO_ACTIVE_LOW>;
-			reset-assert-us = <10000>;
-			qca,disable-smarteee;
-			vddio-supply = <&vddio>;
-
-			vddio: vddio-regulator {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-			};
-		};
-	};
-};
-
-&i2c1 {
-	clock-frequency = <400000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c1>;
-	status = "okay";
-
-	pmic at 4b {
-		compatible = "rohm,bd71847";
-		reg = <0x4b>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_pmic>;
-		interrupt-parent = <&gpio1>;
-		interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
-		rohm,reset-snvs-powered;
-
-		#clock-cells = <0>;
-		clocks = <&osc_32k 0>;
-		clock-output-names = "clk-32k-out";
-
-		regulators {
-			buck1_reg: BUCK1 {
-				regulator-name = "buck1";
-				regulator-min-microvolt = <700000>;
-				regulator-max-microvolt = <1300000>;
-				regulator-boot-on;
-				regulator-always-on;
-				regulator-ramp-delay = <1250>;
-			};
-
-			buck2_reg: BUCK2 {
-				regulator-name = "buck2";
-				regulator-min-microvolt = <700000>;
-				regulator-max-microvolt = <1300000>;
-				regulator-boot-on;
-				regulator-always-on;
-				regulator-ramp-delay = <1250>;
-				rohm,dvs-run-voltage = <1000000>;
-				rohm,dvs-idle-voltage = <900000>;
-			};
-
-			buck3_reg: BUCK3 {
-				// BUCK5 in datasheet
-				regulator-name = "buck3";
-				regulator-min-microvolt = <700000>;
-				regulator-max-microvolt = <1350000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			buck4_reg: BUCK4 {
-				// BUCK6 in datasheet
-				regulator-name = "buck4";
-				regulator-min-microvolt = <3000000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			buck5_reg: BUCK5 {
-				// BUCK7 in datasheet
-				regulator-name = "buck5";
-				regulator-min-microvolt = <1605000>;
-				regulator-max-microvolt = <1995000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			buck6_reg: BUCK6 {
-				// BUCK8 in datasheet
-				regulator-name = "buck6";
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <1400000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			ldo1_reg: LDO1 {
-				regulator-name = "ldo1";
-				regulator-min-microvolt = <1600000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			ldo2_reg: LDO2 {
-				regulator-name = "ldo2";
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <900000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			ldo3_reg: LDO3 {
-				regulator-name = "ldo3";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			ldo4_reg: LDO4 {
-				regulator-name = "ldo4";
-				regulator-min-microvolt = <900000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			ldo6_reg: LDO6 {
-				regulator-name = "ldo6";
-				regulator-min-microvolt = <900000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-		};
-	};
-};
-
-&i2c2 {
-	clock-frequency = <400000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c2>;
-	status = "okay";
-
-	ptn5110: tcpc at 50 {
-		compatible = "nxp,ptn5110";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_typec1>;
-		reg = <0x50>;
-		interrupt-parent = <&gpio2>;
-		interrupts = <11 8>;
-		status = "okay";
-
-		port {
-			typec1_dr_sw: endpoint {
-				remote-endpoint = <&usb1_drd_sw>;
-			};
-		};
-
-		typec1_con: connector {
-			compatible = "usb-c-connector";
-			label = "USB-C";
-			power-role = "dual";
-			data-role = "dual";
-			try-power-role = "sink";
-			source-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)>;
-			sink-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)
-				     PDO_VAR(5000, 20000, 3000)>;
-			op-sink-microwatt = <15000000>;
-			self-powered;
-		};
-	};
-};
-
-&i2c3 {
-	clock-frequency = <400000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c3>;
-	status = "okay";
-
-	pca6416: gpio at 20 {
-		compatible = "ti,tca6416";
-		reg = <0x20>;
-		gpio-controller;
-		#gpio-cells = <2>;
-	};
-};
-
-&pcie_phy {
-	fsl,refclk-pad-mode = <IMX8_PCIE_REFCLK_PAD_INPUT>;
-	fsl,tx-deemph-gen1 = <0x2d>;
-	fsl,tx-deemph-gen2 = <0xf>;
-	clocks = <&pcie0_refclk>;
-	status = "okay";
-};
-
-&pcie0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pcie0>;
-	reset-gpio = <&gpio4 21 GPIO_ACTIVE_LOW>;
-	clocks = <&clk IMX8MM_CLK_PCIE1_ROOT>, <&clk IMX8MM_CLK_PCIE1_AUX>,
-		 <&pcie0_refclk>;
-	clock-names = "pcie", "pcie_aux", "pcie_bus";
-	assigned-clocks = <&clk IMX8MM_CLK_PCIE1_AUX>,
-			  <&clk IMX8MM_CLK_PCIE1_CTRL>;
-	assigned-clock-rates = <10000000>, <250000000>;
-	assigned-clock-parents = <&clk IMX8MM_SYS_PLL2_50M>,
-				 <&clk IMX8MM_SYS_PLL2_250M>;
-	vpcie-supply = <&reg_pcie0>;
-	status = "okay";
-};
-
-&sai2 {
-	#sound-dai-cells = <0>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_sai2>;
-	assigned-clocks = <&clk IMX8MM_CLK_SAI2>;
-	assigned-clock-parents = <&clk IMX8MM_AUDIO_PLL1_OUT>;
-	assigned-clock-rates = <24576000>;
-	status = "okay";
-};
-
-&sai3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_sai3>;
-	assigned-clocks = <&clk IMX8MM_CLK_SAI3>;
-	assigned-clock-parents = <&clk IMX8MM_AUDIO_PLL1_OUT>;
-	assigned-clock-rates = <24576000>;
-	status = "okay";
-};
-
-&snvs_pwrkey {
-	status = "okay";
-};
-
-&uart2 { /* console */
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart2>;
-	status = "okay";
-};
-
-&usbotg1 {
-	dr_mode = "otg";
-	hnp-disable;
-	srp-disable;
-	adp-disable;
-	usb-role-switch;
-	disable-over-current;
-	samsung,picophy-pre-emp-curr-control = <3>;
-	samsung,picophy-dc-vol-level-adjust = <7>;
-	status = "okay";
-
-	port {
-		usb1_drd_sw: endpoint {
-			remote-endpoint = <&typec1_dr_sw>;
-		};
-	};
-};
-
-&usdhc2 {
-	assigned-clocks = <&clk IMX8MM_CLK_USDHC2>;
-	assigned-clock-rates = <200000000>;
-	pinctrl-names = "default", "state_100mhz", "state_200mhz";
-	pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
-	pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>;
-	pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>;
-	cd-gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
-	bus-width = <4>;
-	vmmc-supply = <&reg_usdhc2_vmmc>;
-	status = "okay";
-};
-
-&wdog1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_wdog>;
-	fsl,ext-reset-output;
-	status = "okay";
-};
-
-&pwm1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_backlight>;
-	status = "okay";
-};
-
-&iomuxc {
-	pinctrl_fec1: fec1grp {
-		fsl,pins = <
-			MX8MM_IOMUXC_ENET_MDC_ENET1_MDC			0x3
-			MX8MM_IOMUXC_ENET_MDIO_ENET1_MDIO		0x3
-			MX8MM_IOMUXC_ENET_TD3_ENET1_RGMII_TD3		0x1f
-			MX8MM_IOMUXC_ENET_TD2_ENET1_RGMII_TD2		0x1f
-			MX8MM_IOMUXC_ENET_TD1_ENET1_RGMII_TD1		0x1f
-			MX8MM_IOMUXC_ENET_TD0_ENET1_RGMII_TD0		0x1f
-			MX8MM_IOMUXC_ENET_RD3_ENET1_RGMII_RD3		0x91
-			MX8MM_IOMUXC_ENET_RD2_ENET1_RGMII_RD2		0x91
-			MX8MM_IOMUXC_ENET_RD1_ENET1_RGMII_RD1		0x91
-			MX8MM_IOMUXC_ENET_RD0_ENET1_RGMII_RD0		0x91
-			MX8MM_IOMUXC_ENET_TXC_ENET1_RGMII_TXC		0x1f
-			MX8MM_IOMUXC_ENET_RXC_ENET1_RGMII_RXC		0x91
-			MX8MM_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL	0x91
-			MX8MM_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL	0x1f
-			MX8MM_IOMUXC_SAI2_RXC_GPIO4_IO22		0x19
-		>;
-	};
-
-	pinctrl_gpio_led: gpioledgrp {
-		fsl,pins = <
-			MX8MM_IOMUXC_NAND_READY_B_GPIO3_IO16	0x19
-		>;
-	};
-
-	pinctrl_ir: irgrp {
-		fsl,pins = <
-			MX8MM_IOMUXC_GPIO1_IO13_GPIO1_IO13              0x4f
-		>;
-	};
-
-	pinctrl_gpio_wlf: gpiowlfgrp {
-		fsl,pins = <
-			MX8MM_IOMUXC_I2C4_SDA_GPIO5_IO21	0xd6
-		>;
-	};
-
-	pinctrl_i2c1: i2c1grp {
-		fsl,pins = <
-			MX8MM_IOMUXC_I2C1_SCL_I2C1_SCL			0x400001c3
-			MX8MM_IOMUXC_I2C1_SDA_I2C1_SDA			0x400001c3
-		>;
-	};
-
-	pinctrl_i2c2: i2c2grp {
-		fsl,pins = <
-			MX8MM_IOMUXC_I2C2_SCL_I2C2_SCL			0x400001c3
-			MX8MM_IOMUXC_I2C2_SDA_I2C2_SDA			0x400001c3
-		>;
-	};
-
-	pinctrl_i2c3: i2c3grp {
-		fsl,pins = <
-			MX8MM_IOMUXC_I2C3_SCL_I2C3_SCL			0x400001c3
-			MX8MM_IOMUXC_I2C3_SDA_I2C3_SDA			0x400001c3
-		>;
-	};
-
-	pinctrl_pcie0: pcie0grp {
-		fsl,pins = <
-			MX8MM_IOMUXC_I2C4_SCL_PCIE1_CLKREQ_B    0x61
-			MX8MM_IOMUXC_SAI2_RXFS_GPIO4_IO21       0x41
-		>;
-	};
-
-	pinctrl_pcie0_reg: pcie0reggrp {
-		fsl,pins = <
-			MX8MM_IOMUXC_GPIO1_IO05_GPIO1_IO5       0x41
-		>;
-	};
-
-	pinctrl_pmic: pmicirqgrp {
-		fsl,pins = <
-			MX8MM_IOMUXC_GPIO1_IO03_GPIO1_IO3		0x141
-		>;
-	};
-
-	pinctrl_reg_usdhc2_vmmc: regusdhc2vmmcgrp {
-		fsl,pins = <
-			MX8MM_IOMUXC_SD2_RESET_B_GPIO2_IO19	0x41
-		>;
-	};
-
-	pinctrl_sai2: sai2grp {
-		fsl,pins = <
-			MX8MM_IOMUXC_SAI2_TXC_SAI2_TX_BCLK      0xd6
-			MX8MM_IOMUXC_SAI2_TXFS_SAI2_TX_SYNC     0xd6
-			MX8MM_IOMUXC_SAI2_TXD0_SAI2_TX_DATA0    0xd6
-			MX8MM_IOMUXC_SAI2_RXD0_SAI2_RX_DATA0    0xd6
-		>;
-	};
-
-	pinctrl_sai3: sai3grp {
-		fsl,pins = <
-			MX8MM_IOMUXC_SAI3_TXFS_SAI3_TX_SYNC     0xd6
-			MX8MM_IOMUXC_SAI3_TXC_SAI3_TX_BCLK      0xd6
-			MX8MM_IOMUXC_SAI3_MCLK_SAI3_MCLK        0xd6
-			MX8MM_IOMUXC_SAI3_TXD_SAI3_TX_DATA0     0xd6
-		>;
-	};
-
-	pinctrl_typec1: typec1grp {
-		fsl,pins = <
-			MX8MM_IOMUXC_SD1_STROBE_GPIO2_IO11	0x159
-		>;
-	};
-
-	pinctrl_uart2: uart2grp {
-		fsl,pins = <
-			MX8MM_IOMUXC_UART2_RXD_UART2_DCE_RX	0x140
-			MX8MM_IOMUXC_UART2_TXD_UART2_DCE_TX	0x140
-		>;
-	};
-
-	pinctrl_usdhc2_gpio: usdhc2grpgpiogrp {
-		fsl,pins = <
-			MX8MM_IOMUXC_GPIO1_IO15_GPIO1_IO15	0x1c4
-		>;
-	};
-
-	pinctrl_usdhc2: usdhc2grp {
-		fsl,pins = <
-			MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK		0x190
-			MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD		0x1d0
-			MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0	0x1d0
-			MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1	0x1d0
-			MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2	0x1d0
-			MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3	0x1d0
-			MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT	0x1d0
-		>;
-	};
-
-	pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
-		fsl,pins = <
-			MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK		0x194
-			MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD		0x1d4
-			MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0	0x1d4
-			MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1	0x1d4
-			MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2	0x1d4
-			MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3	0x1d4
-			MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT	0x1d0
-		>;
-	};
-
-	pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
-		fsl,pins = <
-			MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK		0x196
-			MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD		0x1d6
-			MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0	0x1d6
-			MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1	0x1d6
-			MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2	0x1d6
-			MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3	0x1d6
-			MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT	0x1d0
-		>;
-	};
-
-	pinctrl_wdog: wdoggrp {
-		fsl,pins = <
-			MX8MM_IOMUXC_GPIO1_IO02_WDOG1_WDOG_B	0x166
-		>;
-	};
-
-	pinctrl_backlight: backlightgrp {
-		fsl,pins = <
-			MX8MM_IOMUXC_GPIO1_IO01_PWM1_OUT	0x06
-		>;
-	};
-};
diff --git a/arch/arm/mach-imx/imx8m/Kconfig b/arch/arm/mach-imx/imx8m/Kconfig
index 6f68ee2c27d..dd139c1b223 100644
--- a/arch/arm/mach-imx/imx8m/Kconfig
+++ b/arch/arm/mach-imx/imx8m/Kconfig
@@ -79,6 +79,7 @@ config TARGET_IMX8MM_EVK
 	select FSL_CAAM
 	select ARCH_MISC_INIT
 	select SPL_CRYPTO if SPL
+	imply OF_UPSTREAM
 
 config TARGET_IMX8MM_ICORE_MX8MM
 	bool "Engicam i.Core MX8M Mini SOM"
diff --git a/configs/imx8mm_evk_defconfig b/configs/imx8mm_evk_defconfig
index b51e3931d24..e41facd8513 100644
--- a/configs/imx8mm_evk_defconfig
+++ b/configs/imx8mm_evk_defconfig
@@ -8,7 +8,7 @@ CONFIG_SPL_LIBGENERIC_SUPPORT=y
 CONFIG_ENV_SIZE=0x1000
 CONFIG_ENV_OFFSET=0x400000
 CONFIG_DM_GPIO=y
-CONFIG_DEFAULT_DEVICE_TREE="imx8mm-evk"
+CONFIG_DEFAULT_DEVICE_TREE="freescale/imx8mm-evk"
 CONFIG_SPL_TEXT_BASE=0x7E1000
 CONFIG_TARGET_IMX8MM_EVK=y
 CONFIG_SYS_MONITOR_LEN=524288
diff --git a/configs/imx8mm_evk_fspi_defconfig b/configs/imx8mm_evk_fspi_defconfig
index 34e8071611b..3aaf7a4d0d5 100644
--- a/configs/imx8mm_evk_fspi_defconfig
+++ b/configs/imx8mm_evk_fspi_defconfig
@@ -11,7 +11,7 @@ CONFIG_ENV_SIZE=0x1000
 CONFIG_ENV_OFFSET=0x400000
 CONFIG_IMX_CONFIG="board/freescale/imx8mm_evk/imximage-8mm-lpddr4-fspi.cfg"
 CONFIG_DM_GPIO=y
-CONFIG_DEFAULT_DEVICE_TREE="imx8mm-evk"
+CONFIG_DEFAULT_DEVICE_TREE="freescale/imx8mm-evk"
 CONFIG_SPL_TEXT_BASE=0x7E2000
 CONFIG_TARGET_IMX8MM_EVK=y
 CONFIG_SYS_MONITOR_LEN=524288

-- 
2.35.3



More information about the U-Boot mailing list