[PATCH u-boot-mvebu v3 09/18] arm: mvebu: system-controller: Rework to use UCLASS_SYSCON
Stefan Roese
sr at denx.de
Thu Mar 28 10:59:28 CET 2024
On 3/27/24 17:23, Marek Behún wrote:
> The system-controller driver for 32-bit Armada is currently registered
> as UCLASS_RESET, since it only provides enabling/disabling PCIe ports.
>
> Rework it as UCLASS_SYSCON and bind mvebu-reset as a child device.
>
> Signed-off-by: Marek Behún <kabel at kernel.org>
Reviewed-by: Stefan Roese <sr at denx.de>
Thanks,
Stefan
> ---
> arch/arm/mach-mvebu/Kconfig | 11 ++++
> arch/arm/mach-mvebu/Makefile | 2 +-
> arch/arm/mach-mvebu/system-controller.c | 76 ++++++++++++++-----------
> 3 files changed, 54 insertions(+), 35 deletions(-)
>
> diff --git a/arch/arm/mach-mvebu/Kconfig b/arch/arm/mach-mvebu/Kconfig
> index 2058c95ca2..62a2bc5958 100644
> --- a/arch/arm/mach-mvebu/Kconfig
> +++ b/arch/arm/mach-mvebu/Kconfig
> @@ -18,6 +18,7 @@ config ARMADA_32BIT
> select TOOLS_KWBIMAGE if SPL
> select SPL_SYS_NO_VECTOR_TABLE if SPL
> select ARCH_VERY_EARLY_INIT
> + select ARMADA_32BIT_SYSCON_RESET if DM_RESET
>
> # ARMv7 SoCs...
> config ARMADA_375
> @@ -456,6 +457,16 @@ config SF_DEFAULT_MODE
> default 0x0
> depends on MVEBU_SPL_BOOT_DEVICE_SPI
>
> +config ARMADA_32BIT_SYSCON_RESET
> + bool "Support Armada XP/375/38x/39x reset controller"
> + depends on ARMADA_32BIT
> + depends on DM_RESET
> + select REGMAP
> + select SYSCON
> + help
> + Build support for Armada XP/375/38x/39x reset controller. This is
> + needed for PCIe support.
> +
> source "board/solidrun/clearfog/Kconfig"
> source "board/kobol/helios4/Kconfig"
>
> diff --git a/arch/arm/mach-mvebu/Makefile b/arch/arm/mach-mvebu/Makefile
> index ef790d97fe..d44ca3a0df 100644
> --- a/arch/arm/mach-mvebu/Makefile
> +++ b/arch/arm/mach-mvebu/Makefile
> @@ -28,7 +28,7 @@ obj-$(CONFIG_ARMADA_38X) += ../../../drivers/ddr/marvell/a38x/xor.o
> obj-$(CONFIG_ARMADA_XP) += ../../../drivers/ddr/marvell/axp/xor.o
> obj-$(CONFIG_ARMADA_MSYS) += ../../../drivers/ddr/marvell/axp/xor.o
>
> -obj-$(CONFIG_DM_RESET) += system-controller.o
> +obj-$(CONFIG_ARMADA_32BIT_SYSCON_RESET) += system-controller.o
>
> ifdef CONFIG_ARMADA_38X
> obj-$(CONFIG_MVEBU_EFUSE) += efuse.o
> diff --git a/arch/arm/mach-mvebu/system-controller.c b/arch/arm/mach-mvebu/system-controller.c
> index 7cdde11cbd..c5c05922f2 100644
> --- a/arch/arm/mach-mvebu/system-controller.c
> +++ b/arch/arm/mach-mvebu/system-controller.c
> @@ -1,19 +1,21 @@
> // SPDX-License-Identifier: GPL-2.0+
> -// (C) 2021 Pali Rohár <pali at kernel.org>
> +/*
> + * Copyright (C) 2021 Pali Rohár <pali at kernel.org>
> + * Copyright (C) 2024 Marek Behún <kabel at kernel.org>
> + */
>
> #include <common.h>
> #include <dm.h>
> +#include <dm/lists.h>
> +#include <regmap.h>
> #include <reset-uclass.h>
> +#include <syscon.h>
> #include <asm/io.h>
>
> #define MVEBU_SOC_CONTROL_1_REG 0x4
>
> #define MVEBU_PCIE_ID 0
>
> -struct mvebu_reset_data {
> - void *base;
> -};
> -
> static int mvebu_reset_of_xlate(struct reset_ctl *rst,
> struct ofnode_phandle_args *args)
> {
> @@ -46,46 +48,33 @@ static int mvebu_reset_free(struct reset_ctl *rst)
>
> static int mvebu_reset_assert(struct reset_ctl *rst)
> {
> - struct mvebu_reset_data *data = dev_get_priv(rst->dev);
> + struct regmap *regmap = syscon_get_regmap(rst->dev->parent);
>
> - clrbits_32(data->base + MVEBU_SOC_CONTROL_1_REG, BIT(rst->data));
> - return 0;
> + return regmap_update_bits(regmap, MVEBU_SOC_CONTROL_1_REG,
> + BIT(rst->data), 0);
> }
>
> static int mvebu_reset_deassert(struct reset_ctl *rst)
> {
> - struct mvebu_reset_data *data = dev_get_priv(rst->dev);
> + struct regmap *regmap = syscon_get_regmap(rst->dev->parent);
>
> - setbits_32(data->base + MVEBU_SOC_CONTROL_1_REG, BIT(rst->data));
> - return 0;
> + return regmap_update_bits(regmap, MVEBU_SOC_CONTROL_1_REG,
> + BIT(rst->data), BIT(rst->data));
> }
>
> static int mvebu_reset_status(struct reset_ctl *rst)
> {
> - struct mvebu_reset_data *data = dev_get_priv(rst->dev);
> + struct regmap *regmap = syscon_get_regmap(rst->dev->parent);
> + uint val;
> + int ret;
>
> - return !(readl(data->base + MVEBU_SOC_CONTROL_1_REG) & BIT(rst->data));
> -}
> -
> -static int mvebu_reset_of_to_plat(struct udevice *dev)
> -{
> - struct mvebu_reset_data *data = dev_get_priv(dev);
> + ret = regmap_read(regmap, MVEBU_SOC_CONTROL_1_REG, &val);
> + if (ret < 0)
> + return ret;
>
> - data->base = dev_read_addr_ptr(dev);
> - if (!data->base)
> - return -EINVAL;
> -
> - return 0;
> + return !(val & BIT(rst->data));
> }
>
> -static const struct udevice_id mvebu_reset_of_match[] = {
> - { .compatible = "marvell,armada-370-xp-system-controller" },
> - { .compatible = "marvell,armada-375-system-controller" },
> - { .compatible = "marvell,armada-380-system-controller" },
> - { .compatible = "marvell,armada-390-system-controller" },
> - { },
> -};
> -
> static const struct reset_ops mvebu_reset_ops = {
> .of_xlate = mvebu_reset_of_xlate,
> .request = mvebu_reset_request,
> @@ -98,8 +87,27 @@ static const struct reset_ops mvebu_reset_ops = {
> U_BOOT_DRIVER(mvebu_reset) = {
> .name = "mvebu-reset",
> .id = UCLASS_RESET,
> - .of_match = mvebu_reset_of_match,
> - .of_to_plat = mvebu_reset_of_to_plat,
> - .priv_auto = sizeof(struct mvebu_reset_data),
> .ops = &mvebu_reset_ops,
> };
> +
> +static int mvebu_syscon_bind(struct udevice *dev)
> +{
> + /* bind also mvebu-reset, with the same ofnode */
> + return device_bind_driver_to_node(dev, "mvebu-reset", "mvebu-reset",
> + dev_ofnode(dev), NULL);
> +}
> +
> +static const struct udevice_id mvebu_syscon_of_match[] = {
> + { .compatible = "marvell,armada-370-xp-system-controller" },
> + { .compatible = "marvell,armada-375-system-controller" },
> + { .compatible = "marvell,armada-380-system-controller" },
> + { .compatible = "marvell,armada-390-system-controller" },
> + { },
> +};
> +
> +U_BOOT_DRIVER(mvebu_syscon) = {
> + .name = "mvebu-system-controller",
> + .id = UCLASS_SYSCON,
> + .of_match = mvebu_syscon_of_match,
> + .bind = mvebu_syscon_bind,
> +};
Viele Grüße,
Stefan Roese
--
DENX Software Engineering GmbH, Managing Director: Erika Unter
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-51 Fax: (+49)-8142-66989-80 Email: sr at denx.de
More information about the U-Boot
mailing list