[PATCH] mx6cuboxi: Fix Ethernet after DT sync with Linux

[Fabio Estevam]

Hi Josua,

On Thu, Mar 28, 2024 at 10:03 AM Josua Mayer <josua at solid-run.com> wrote:

> I suggest changing their status to disabled, and keeping the nodes.
> >> +
> >> +            phy: ethernet-phy at 0 {
> > This node name is shared with upstream imx6qdl-sr-som.dtsi
> Give this one a u-boot-only internal name, maybe ethernet-phy at ff
...
> Just disable the u-boot-internal phy node unconditionally, or delete it.
> Because u-boot DTB is synced with upstream, the code below will update status properties
> for the standard etherent-phy@[0,1,4] nodes used by Linux.

Thanks for the suggestions.

My imx6-cuboxi board does not turn on anymore, unfortunately.

As I cannot test it, I am not comfortable doing the changes.

I hope you or Christian can submit a proper fix.