[PATCH 1/6] arm: spl: xea: Remove I2S pins configuration from early initialization

[Lukasz Majewski]

XEA is not supporting and using I2S codec, so there is no need to
configure pins for it.

Signed-off-by: Lukasz Majewski <lukma at denx.de>
---

 board/liebherr/xea/spl_xea.c | 7 -------
 1 file changed, 7 deletions(-)

diff --git a/board/liebherr/xea/spl_xea.c b/board/liebherr/xea/spl_xea.c
index df354cac64..551ed6fbae 100644
--- a/board/liebherr/xea/spl_xea.c
+++ b/board/liebherr/xea/spl_xea.c
@@ -112,13 +112,6 @@ const iomux_cfg_t iomux_setup[] = {
 	MX28_PAD_I2C0_SCL__I2C0_SCL,
 	MX28_PAD_I2C0_SDA__I2C0_SDA,
 
-	/* I2S Codec */
-	MX28_PAD_SAIF0_BITCLK__SAIF0_BITCLK,
-	MX28_PAD_SAIF0_LRCLK__SAIF0_LRCLK,
-	MX28_PAD_SAIF0_MCLK__SAIF0_MCLK,
-	MX28_PAD_SAIF0_SDATA0__SAIF0_SDATA0,
-	MX28_PAD_SAIF1_SDATA0__SAIF1_SDATA0,
-
 	/* PWR-Hold */
 	MX28_PAD_SPDIF__GPIO_3_27,
 
-- 
2.39.2