[PATCH v2 5/5] dts: meson: Drop redundant G12A, G12B & SM1 devicetree files
Neil Armstrong
neil.armstrong at linaro.org
Fri Mar 29 18:51:52 CET 2024
Since meson G12A, G12B & SM1 based boards switched to using upstream DT,
so drop redundant files from arch/arm/dts directory. Only *-u-boot.dtsi files
kept in arch/arm/dts directory for these boards.
Cc: Sumit Garg <sumit.garg at linaro.org>
Acked-by: Viacheslav Bocharov <adeep at lexina.in>
Reviewed-by: Sumit Garg <sumit.garg at linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong at linaro.org>
---
arch/arm/dts/Makefile | 23 +-
arch/arm/dts/meson-g12-common.dtsi | 2493 --------------------
arch/arm/dts/meson-g12.dtsi | 385 ---
arch/arm/dts/meson-g12a-radxa-zero.dts | 405 ----
arch/arm/dts/meson-g12a-sei510.dts | 566 -----
arch/arm/dts/meson-g12a-u200.dts | 308 ---
arch/arm/dts/meson-g12a.dtsi | 140 --
arch/arm/dts/meson-g12b-a311d-bananapi-m2s.dts | 33 -
arch/arm/dts/meson-g12b-a311d-khadas-vim3.dts | 41 -
arch/arm/dts/meson-g12b-a311d.dtsi | 149 --
arch/arm/dts/meson-g12b-bananapi-cm4-cm4io.dts | 165 --
arch/arm/dts/meson-g12b-bananapi-cm4.dtsi | 388 ---
arch/arm/dts/meson-g12b-bananapi.dtsi | 521 ----
arch/arm/dts/meson-g12b-gsking-x.dts | 133 --
arch/arm/dts/meson-g12b-gtking-pro.dts | 142 --
arch/arm/dts/meson-g12b-gtking.dts | 163 --
arch/arm/dts/meson-g12b-khadas-vim3.dtsi | 107 -
arch/arm/dts/meson-g12b-odroid-go-ultra.dts | 722 ------
arch/arm/dts/meson-g12b-odroid-n2-plus.dts | 31 -
arch/arm/dts/meson-g12b-odroid-n2.dts | 15 -
arch/arm/dts/meson-g12b-odroid-n2.dtsi | 303 ---
arch/arm/dts/meson-g12b-odroid-n2l.dts | 125 -
arch/arm/dts/meson-g12b-odroid.dtsi | 445 ----
arch/arm/dts/meson-g12b-radxa-zero2.dts | 489 ----
arch/arm/dts/meson-g12b-s922x-bananapi-m2s.dts | 14 -
arch/arm/dts/meson-g12b-s922x.dtsi | 139 --
arch/arm/dts/meson-g12b-w400.dtsi | 425 ----
arch/arm/dts/meson-g12b.dtsi | 146 --
arch/arm/dts/meson-khadas-vim3.dtsi | 534 -----
arch/arm/dts/meson-sm1-bananapi-m2-pro.dts | 97 -
arch/arm/dts/meson-sm1-bananapi-m5.dts | 221 --
arch/arm/dts/meson-sm1-bananapi.dtsi | 435 ----
arch/arm/dts/meson-sm1-khadas-vim3l.dts | 113 -
arch/arm/dts/meson-sm1-odroid-c4.dts | 48 -
arch/arm/dts/meson-sm1-odroid-hc4.dts | 140 --
arch/arm/dts/meson-sm1-odroid.dtsi | 449 ----
arch/arm/dts/meson-sm1-sei610.dts | 616 -----
arch/arm/dts/meson-sm1.dtsi | 550 -----
include/dt-bindings/gpio/meson-g12a-gpio.h | 114 -
include/dt-bindings/power/meson-g12a-power.h | 13 -
include/dt-bindings/power/meson-sm1-power.h | 18 -
.../reset/amlogic,meson-axg-audio-arb.h | 19 -
.../reset/amlogic,meson-g12a-audio-reset.h | 53 -
.../dt-bindings/reset/amlogic,meson-g12a-reset.h | 137 --
include/dt-bindings/sound/meson-g12a-toacodec.h | 10 -
include/dt-bindings/sound/meson-g12a-tohdmitx.h | 13 -
46 files changed, 2 insertions(+), 12594 deletions(-)
diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
index 135e08df3c..afa068ed55 100644
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -219,27 +219,8 @@ dtb-$(CONFIG_ARCH_S5P4418) += \
s5p4418-nanopi2.dtb
dtb-$(CONFIG_ARCH_MESON) += \
- meson-a1-ad401.dtb \
- meson-g12a-radxa-zero.dtb \
- meson-g12a-sei510.dtb \
- meson-g12a-u200.dtb \
- meson-g12b-a311d-bananapi-m2s.dtb \
- meson-g12b-a311d-khadas-vim3.dtb \
- meson-g12b-bananapi-cm4-cm4io.dtb \
- meson-g12b-gsking-x.dtb \
- meson-g12b-gtking.dtb \
- meson-g12b-gtking-pro.dtb \
- meson-g12b-odroid-go-ultra.dtb \
- meson-g12b-odroid-n2.dtb \
- meson-g12b-odroid-n2l.dtb \
- meson-g12b-odroid-n2-plus.dtb \
- meson-g12b-radxa-zero2.dtb \
- meson-sm1-bananapi-m2-pro.dtb \
- meson-sm1-bananapi-m5.dtb \
- meson-sm1-khadas-vim3l.dtb \
- meson-sm1-odroid-c4.dtb \
- meson-sm1-odroid-hc4.dtb \
- meson-sm1-sei610.dtb
+ meson-a1-ad401.dtb
+
dtb-$(CONFIG_ARCH_TEGRA) += tegra20-harmony.dtb \
tegra20-medcom-wide.dtb \
tegra20-paz00.dtb \
diff --git a/arch/arm/dts/meson-g12-common.dtsi b/arch/arm/dts/meson-g12-common.dtsi
deleted file mode 100644
index 9dbd50820b..0000000000
--- a/arch/arm/dts/meson-g12-common.dtsi
+++ /dev/null
@@ -1,2493 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Copyright (c) 2018 Amlogic, Inc. All rights reserved.
- */
-
-#include <dt-bindings/phy/phy.h>
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/clock/g12a-clkc.h>
-#include <dt-bindings/clock/g12a-aoclkc.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/interrupt-controller/arm-gic.h>
-#include <dt-bindings/reset/amlogic,meson-g12a-reset.h>
-#include <dt-bindings/thermal/thermal.h>
-
-/ {
- interrupt-parent = <&gic>;
- #address-cells = <2>;
- #size-cells = <2>;
-
- aliases {
- mmc0 = &sd_emmc_b; /* SD card */
- mmc1 = &sd_emmc_c; /* eMMC */
- mmc2 = &sd_emmc_a; /* SDIO */
- };
-
- chosen {
- #address-cells = <2>;
- #size-cells = <2>;
- ranges;
-
- simplefb_cvbs: framebuffer-cvbs {
- compatible = "amlogic,simple-framebuffer",
- "simple-framebuffer";
- amlogic,pipeline = "vpu-cvbs";
- clocks = <&clkc CLKID_HDMI>,
- <&clkc CLKID_HTX_PCLK>,
- <&clkc CLKID_VPU_INTR>;
- status = "disabled";
- };
-
- simplefb_hdmi: framebuffer-hdmi {
- compatible = "amlogic,simple-framebuffer",
- "simple-framebuffer";
- amlogic,pipeline = "vpu-hdmi";
- clocks = <&clkc CLKID_HDMI>,
- <&clkc CLKID_HTX_PCLK>,
- <&clkc CLKID_VPU_INTR>;
- status = "disabled";
- };
- };
-
- efuse: efuse {
- compatible = "amlogic,meson-gxbb-efuse";
- clocks = <&clkc CLKID_EFUSE>;
- #address-cells = <1>;
- #size-cells = <1>;
- read-only;
- secure-monitor = <&sm>;
- };
-
- gpu_opp_table: opp-table-gpu {
- compatible = "operating-points-v2";
-
- opp-124999998 {
- opp-hz = /bits/ 64 <124999998>;
- opp-microvolt = <800000>;
- };
- opp-249999996 {
- opp-hz = /bits/ 64 <249999996>;
- opp-microvolt = <800000>;
- };
- opp-285714281 {
- opp-hz = /bits/ 64 <285714281>;
- opp-microvolt = <800000>;
- };
- opp-399999994 {
- opp-hz = /bits/ 64 <399999994>;
- opp-microvolt = <800000>;
- };
- opp-499999992 {
- opp-hz = /bits/ 64 <499999992>;
- opp-microvolt = <800000>;
- };
- opp-666666656 {
- opp-hz = /bits/ 64 <666666656>;
- opp-microvolt = <800000>;
- };
- opp-799999987 {
- opp-hz = /bits/ 64 <799999987>;
- opp-microvolt = <800000>;
- };
- };
-
- psci {
- compatible = "arm,psci-1.0";
- method = "smc";
- };
-
- reserved-memory {
- #address-cells = <2>;
- #size-cells = <2>;
- ranges;
-
- /* 3 MiB reserved for ARM Trusted Firmware (BL31) */
- secmon_reserved: secmon at 5000000 {
- reg = <0x0 0x05000000 0x0 0x300000>;
- no-map;
- };
-
- /* 32 MiB reserved for ARM Trusted Firmware (BL32) */
- secmon_reserved_bl32: secmon at 5300000 {
- reg = <0x0 0x05300000 0x0 0x2000000>;
- no-map;
- };
-
- linux,cma {
- compatible = "shared-dma-pool";
- reusable;
- size = <0x0 0x10000000>;
- alignment = <0x0 0x400000>;
- linux,cma-default;
- };
- };
-
- sm: secure-monitor {
- compatible = "amlogic,meson-gxbb-sm";
- };
-
- soc {
- compatible = "simple-bus";
- #address-cells = <2>;
- #size-cells = <2>;
- ranges;
-
- pcie: pcie at fc000000 {
- compatible = "amlogic,g12a-pcie", "snps,dw-pcie";
- reg = <0x0 0xfc000000 0x0 0x400000>,
- <0x0 0xff648000 0x0 0x2000>,
- <0x0 0xfc400000 0x0 0x200000>;
- reg-names = "elbi", "cfg", "config";
- interrupts = <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>;
- #interrupt-cells = <1>;
- interrupt-map-mask = <0 0 0 0>;
- interrupt-map = <0 0 0 0 &gic GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>;
- bus-range = <0x0 0xff>;
- #address-cells = <3>;
- #size-cells = <2>;
- device_type = "pci";
- ranges = <0x81000000 0 0 0x0 0xfc600000 0 0x00100000>,
- <0x82000000 0 0xfc700000 0x0 0xfc700000 0 0x1900000>;
-
- clocks = <&clkc CLKID_PCIE_PHY
- &clkc CLKID_PCIE_COMB
- &clkc CLKID_PCIE_PLL>;
- clock-names = "general",
- "pclk",
- "port";
- resets = <&reset RESET_PCIE_CTRL_A>,
- <&reset RESET_PCIE_APB>;
- reset-names = "port",
- "apb";
- num-lanes = <1>;
- phys = <&usb3_pcie_phy PHY_TYPE_PCIE>;
- phy-names = "pcie";
- status = "disabled";
- };
-
- ethmac: ethernet at ff3f0000 {
- compatible = "amlogic,meson-g12a-dwmac",
- "snps,dwmac-3.70a",
- "snps,dwmac";
- reg = <0x0 0xff3f0000 0x0 0x10000>,
- <0x0 0xff634540 0x0 0x8>;
- interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "macirq";
- clocks = <&clkc CLKID_ETH>,
- <&clkc CLKID_FCLK_DIV2>,
- <&clkc CLKID_MPLL2>,
- <&clkc CLKID_FCLK_DIV2>;
- clock-names = "stmmaceth", "clkin0", "clkin1",
- "timing-adjustment";
- rx-fifo-depth = <4096>;
- tx-fifo-depth = <2048>;
- status = "disabled";
-
- mdio0: mdio {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "snps,dwmac-mdio";
- };
- };
-
- apb: bus at ff600000 {
- compatible = "simple-bus";
- reg = <0x0 0xff600000 0x0 0x200000>;
- #address-cells = <2>;
- #size-cells = <2>;
- ranges = <0x0 0x0 0x0 0xff600000 0x0 0x200000>;
-
- hdmi_tx: hdmi-tx at 0 {
- compatible = "amlogic,meson-g12a-dw-hdmi";
- reg = <0x0 0x0 0x0 0x10000>;
- interrupts = <GIC_SPI 57 IRQ_TYPE_EDGE_RISING>;
- resets = <&reset RESET_HDMITX_CAPB3>,
- <&reset RESET_HDMITX_PHY>,
- <&reset RESET_HDMITX>;
- reset-names = "hdmitx_apb", "hdmitx", "hdmitx_phy";
- clocks = <&clkc CLKID_HDMI>,
- <&clkc CLKID_HTX_PCLK>,
- <&clkc CLKID_VPU_INTR>;
- clock-names = "isfr", "iahb", "venci";
- #address-cells = <1>;
- #size-cells = <0>;
- #sound-dai-cells = <0>;
- status = "disabled";
-
- /* VPU VENC Input */
- hdmi_tx_venc_port: port at 0 {
- reg = <0>;
-
- hdmi_tx_in: endpoint {
- remote-endpoint = <&hdmi_tx_out>;
- };
- };
-
- /* TMDS Output */
- hdmi_tx_tmds_port: port at 1 {
- reg = <1>;
- };
- };
-
- apb_efuse: bus at 30000 {
- compatible = "simple-bus";
- reg = <0x0 0x30000 0x0 0x2000>;
- #address-cells = <2>;
- #size-cells = <2>;
- ranges = <0x0 0x0 0x0 0x30000 0x0 0x2000>;
-
- hwrng: rng at 218 {
- compatible = "amlogic,meson-rng";
- reg = <0x0 0x218 0x0 0x4>;
- clocks = <&clkc CLKID_RNG0>;
- clock-names = "core";
- };
- };
-
- acodec: audio-controller at 32000 {
- compatible = "amlogic,t9015";
- reg = <0x0 0x32000 0x0 0x14>;
- #sound-dai-cells = <0>;
- sound-name-prefix = "ACODEC";
- clocks = <&clkc CLKID_AUDIO_CODEC>;
- clock-names = "pclk";
- resets = <&reset RESET_AUDIO_CODEC>;
- status = "disabled";
- };
-
- periphs: bus at 34400 {
- compatible = "simple-bus";
- reg = <0x0 0x34400 0x0 0x400>;
- #address-cells = <2>;
- #size-cells = <2>;
- ranges = <0x0 0x0 0x0 0x34400 0x0 0x400>;
-
- periphs_pinctrl: pinctrl at 40 {
- compatible = "amlogic,meson-g12a-periphs-pinctrl";
- #address-cells = <2>;
- #size-cells = <2>;
- ranges;
-
- gpio: bank at 40 {
- reg = <0x0 0x40 0x0 0x4c>,
- <0x0 0xe8 0x0 0x18>,
- <0x0 0x120 0x0 0x18>,
- <0x0 0x2c0 0x0 0x40>,
- <0x0 0x340 0x0 0x1c>;
- reg-names = "gpio",
- "pull",
- "pull-enable",
- "mux",
- "ds";
- gpio-controller;
- #gpio-cells = <2>;
- gpio-ranges = <&periphs_pinctrl 0 0 86>;
- };
-
- cec_ao_a_h_pins: cec_ao_a_h {
- mux {
- groups = "cec_ao_a_h";
- function = "cec_ao_a_h";
- bias-disable;
- };
- };
-
- cec_ao_b_h_pins: cec_ao_b_h {
- mux {
- groups = "cec_ao_b_h";
- function = "cec_ao_b_h";
- bias-disable;
- };
- };
-
- emmc_ctrl_pins: emmc-ctrl {
- mux-0 {
- groups = "emmc_cmd";
- function = "emmc";
- bias-pull-up;
- drive-strength-microamp = <4000>;
- };
-
- mux-1 {
- groups = "emmc_clk";
- function = "emmc";
- bias-disable;
- drive-strength-microamp = <4000>;
- };
- };
-
- emmc_data_4b_pins: emmc-data-4b {
- mux-0 {
- groups = "emmc_nand_d0",
- "emmc_nand_d1",
- "emmc_nand_d2",
- "emmc_nand_d3";
- function = "emmc";
- bias-pull-up;
- drive-strength-microamp = <4000>;
- };
- };
-
- emmc_data_8b_pins: emmc-data-8b {
- mux-0 {
- groups = "emmc_nand_d0",
- "emmc_nand_d1",
- "emmc_nand_d2",
- "emmc_nand_d3",
- "emmc_nand_d4",
- "emmc_nand_d5",
- "emmc_nand_d6",
- "emmc_nand_d7";
- function = "emmc";
- bias-pull-up;
- drive-strength-microamp = <4000>;
- };
- };
-
- emmc_ds_pins: emmc-ds {
- mux {
- groups = "emmc_nand_ds";
- function = "emmc";
- bias-pull-down;
- drive-strength-microamp = <4000>;
- };
- };
-
- emmc_clk_gate_pins: emmc_clk_gate {
- mux {
- groups = "BOOT_8";
- function = "gpio_periphs";
- bias-pull-down;
- drive-strength-microamp = <4000>;
- };
- };
-
- hdmitx_ddc_pins: hdmitx_ddc {
- mux {
- groups = "hdmitx_sda",
- "hdmitx_sck";
- function = "hdmitx";
- bias-disable;
- drive-strength-microamp = <4000>;
- };
- };
-
- hdmitx_hpd_pins: hdmitx_hpd {
- mux {
- groups = "hdmitx_hpd_in";
- function = "hdmitx";
- bias-disable;
- };
- };
-
-
- i2c0_sda_c_pins: i2c0-sda-c {
- mux {
- groups = "i2c0_sda_c";
- function = "i2c0";
- bias-disable;
- drive-strength-microamp = <3000>;
-
- };
- };
-
- i2c0_sck_c_pins: i2c0-sck-c {
- mux {
- groups = "i2c0_sck_c";
- function = "i2c0";
- bias-disable;
- drive-strength-microamp = <3000>;
- };
- };
-
- i2c0_sda_z0_pins: i2c0-sda-z0 {
- mux {
- groups = "i2c0_sda_z0";
- function = "i2c0";
- bias-disable;
- drive-strength-microamp = <3000>;
- };
- };
-
- i2c0_sck_z1_pins: i2c0-sck-z1 {
- mux {
- groups = "i2c0_sck_z1";
- function = "i2c0";
- bias-disable;
- drive-strength-microamp = <3000>;
- };
- };
-
- i2c0_sda_z7_pins: i2c0-sda-z7 {
- mux {
- groups = "i2c0_sda_z7";
- function = "i2c0";
- bias-disable;
- drive-strength-microamp = <3000>;
- };
- };
-
- i2c0_sda_z8_pins: i2c0-sda-z8 {
- mux {
- groups = "i2c0_sda_z8";
- function = "i2c0";
- bias-disable;
- drive-strength-microamp = <3000>;
- };
- };
-
- i2c1_sda_x_pins: i2c1-sda-x {
- mux {
- groups = "i2c1_sda_x";
- function = "i2c1";
- bias-disable;
- drive-strength-microamp = <3000>;
- };
- };
-
- i2c1_sck_x_pins: i2c1-sck-x {
- mux {
- groups = "i2c1_sck_x";
- function = "i2c1";
- bias-disable;
- drive-strength-microamp = <3000>;
- };
- };
-
- i2c1_sda_h2_pins: i2c1-sda-h2 {
- mux {
- groups = "i2c1_sda_h2";
- function = "i2c1";
- bias-disable;
- drive-strength-microamp = <3000>;
- };
- };
-
- i2c1_sck_h3_pins: i2c1-sck-h3 {
- mux {
- groups = "i2c1_sck_h3";
- function = "i2c1";
- bias-disable;
- drive-strength-microamp = <3000>;
- };
- };
-
- i2c1_sda_h6_pins: i2c1-sda-h6 {
- mux {
- groups = "i2c1_sda_h6";
- function = "i2c1";
- bias-disable;
- drive-strength-microamp = <3000>;
- };
- };
-
- i2c1_sck_h7_pins: i2c1-sck-h7 {
- mux {
- groups = "i2c1_sck_h7";
- function = "i2c1";
- bias-disable;
- drive-strength-microamp = <3000>;
- };
- };
-
- i2c2_sda_x_pins: i2c2-sda-x {
- mux {
- groups = "i2c2_sda_x";
- function = "i2c2";
- bias-disable;
- drive-strength-microamp = <3000>;
- };
- };
-
- i2c2_sck_x_pins: i2c2-sck-x {
- mux {
- groups = "i2c2_sck_x";
- function = "i2c2";
- bias-disable;
- drive-strength-microamp = <3000>;
- };
- };
-
- i2c2_sda_z_pins: i2c2-sda-z {
- mux {
- groups = "i2c2_sda_z";
- function = "i2c2";
- bias-disable;
- drive-strength-microamp = <3000>;
- };
- };
-
- i2c2_sck_z_pins: i2c2-sck-z {
- mux {
- groups = "i2c2_sck_z";
- function = "i2c2";
- bias-disable;
- drive-strength-microamp = <3000>;
- };
- };
-
- i2c3_sda_h_pins: i2c3-sda-h {
- mux {
- groups = "i2c3_sda_h";
- function = "i2c3";
- bias-disable;
- drive-strength-microamp = <3000>;
- };
- };
-
- i2c3_sck_h_pins: i2c3-sck-h {
- mux {
- groups = "i2c3_sck_h";
- function = "i2c3";
- bias-disable;
- drive-strength-microamp = <3000>;
- };
- };
-
- i2c3_sda_a_pins: i2c3-sda-a {
- mux {
- groups = "i2c3_sda_a";
- function = "i2c3";
- bias-disable;
- drive-strength-microamp = <3000>;
- };
- };
-
- i2c3_sck_a_pins: i2c3-sck-a {
- mux {
- groups = "i2c3_sck_a";
- function = "i2c3";
- bias-disable;
- drive-strength-microamp = <3000>;
- };
- };
-
- mclk0_a_pins: mclk0-a {
- mux {
- groups = "mclk0_a";
- function = "mclk0";
- bias-disable;
- drive-strength-microamp = <3000>;
- };
- };
-
- mclk1_a_pins: mclk1-a {
- mux {
- groups = "mclk1_a";
- function = "mclk1";
- bias-disable;
- drive-strength-microamp = <3000>;
- };
- };
-
- mclk1_x_pins: mclk1-x {
- mux {
- groups = "mclk1_x";
- function = "mclk1";
- bias-disable;
- drive-strength-microamp = <3000>;
- };
- };
-
- mclk1_z_pins: mclk1-z {
- mux {
- groups = "mclk1_z";
- function = "mclk1";
- bias-disable;
- drive-strength-microamp = <3000>;
- };
- };
-
- nor_pins: nor {
- mux {
- groups = "nor_d",
- "nor_q",
- "nor_c",
- "nor_cs";
- function = "nor";
- bias-disable;
- };
- };
-
- pdm_din0_a_pins: pdm-din0-a {
- mux {
- groups = "pdm_din0_a";
- function = "pdm";
- bias-disable;
- };
- };
-
- pdm_din0_c_pins: pdm-din0-c {
- mux {
- groups = "pdm_din0_c";
- function = "pdm";
- bias-disable;
- };
- };
-
- pdm_din0_x_pins: pdm-din0-x {
- mux {
- groups = "pdm_din0_x";
- function = "pdm";
- bias-disable;
- };
- };
-
- pdm_din0_z_pins: pdm-din0-z {
- mux {
- groups = "pdm_din0_z";
- function = "pdm";
- bias-disable;
- };
- };
-
- pdm_din1_a_pins: pdm-din1-a {
- mux {
- groups = "pdm_din1_a";
- function = "pdm";
- bias-disable;
- };
- };
-
- pdm_din1_c_pins: pdm-din1-c {
- mux {
- groups = "pdm_din1_c";
- function = "pdm";
- bias-disable;
- };
- };
-
- pdm_din1_x_pins: pdm-din1-x {
- mux {
- groups = "pdm_din1_x";
- function = "pdm";
- bias-disable;
- };
- };
-
- pdm_din1_z_pins: pdm-din1-z {
- mux {
- groups = "pdm_din1_z";
- function = "pdm";
- bias-disable;
- };
- };
-
- pdm_din2_a_pins: pdm-din2-a {
- mux {
- groups = "pdm_din2_a";
- function = "pdm";
- bias-disable;
- };
- };
-
- pdm_din2_c_pins: pdm-din2-c {
- mux {
- groups = "pdm_din2_c";
- function = "pdm";
- bias-disable;
- };
- };
-
- pdm_din2_x_pins: pdm-din2-x {
- mux {
- groups = "pdm_din2_x";
- function = "pdm";
- bias-disable;
- };
- };
-
- pdm_din2_z_pins: pdm-din2-z {
- mux {
- groups = "pdm_din2_z";
- function = "pdm";
- bias-disable;
- };
- };
-
- pdm_din3_a_pins: pdm-din3-a {
- mux {
- groups = "pdm_din3_a";
- function = "pdm";
- bias-disable;
- };
- };
-
- pdm_din3_c_pins: pdm-din3-c {
- mux {
- groups = "pdm_din3_c";
- function = "pdm";
- bias-disable;
- };
- };
-
- pdm_din3_x_pins: pdm-din3-x {
- mux {
- groups = "pdm_din3_x";
- function = "pdm";
- bias-disable;
- };
- };
-
- pdm_din3_z_pins: pdm-din3-z {
- mux {
- groups = "pdm_din3_z";
- function = "pdm";
- bias-disable;
- };
- };
-
- pdm_dclk_a_pins: pdm-dclk-a {
- mux {
- groups = "pdm_dclk_a";
- function = "pdm";
- bias-disable;
- drive-strength-microamp = <500>;
- };
- };
-
- pdm_dclk_c_pins: pdm-dclk-c {
- mux {
- groups = "pdm_dclk_c";
- function = "pdm";
- bias-disable;
- drive-strength-microamp = <500>;
- };
- };
-
- pdm_dclk_x_pins: pdm-dclk-x {
- mux {
- groups = "pdm_dclk_x";
- function = "pdm";
- bias-disable;
- drive-strength-microamp = <500>;
- };
- };
-
- pdm_dclk_z_pins: pdm-dclk-z {
- mux {
- groups = "pdm_dclk_z";
- function = "pdm";
- bias-disable;
- drive-strength-microamp = <500>;
- };
- };
-
- pwm_a_pins: pwm-a {
- mux {
- groups = "pwm_a";
- function = "pwm_a";
- bias-disable;
- };
- };
-
- pwm_b_x7_pins: pwm-b-x7 {
- mux {
- groups = "pwm_b_x7";
- function = "pwm_b";
- bias-disable;
- };
- };
-
- pwm_b_x19_pins: pwm-b-x19 {
- mux {
- groups = "pwm_b_x19";
- function = "pwm_b";
- bias-disable;
- };
- };
-
- pwm_c_c_pins: pwm-c-c {
- mux {
- groups = "pwm_c_c";
- function = "pwm_c";
- bias-disable;
- };
- };
-
- pwm_c_x5_pins: pwm-c-x5 {
- mux {
- groups = "pwm_c_x5";
- function = "pwm_c";
- bias-disable;
- };
- };
-
- pwm_c_x8_pins: pwm-c-x8 {
- mux {
- groups = "pwm_c_x8";
- function = "pwm_c";
- bias-disable;
- };
- };
-
- pwm_d_x3_pins: pwm-d-x3 {
- mux {
- groups = "pwm_d_x3";
- function = "pwm_d";
- bias-disable;
- };
- };
-
- pwm_d_x6_pins: pwm-d-x6 {
- mux {
- groups = "pwm_d_x6";
- function = "pwm_d";
- bias-disable;
- };
- };
-
- pwm_e_pins: pwm-e {
- mux {
- groups = "pwm_e";
- function = "pwm_e";
- bias-disable;
- };
- };
-
- pwm_f_z_pins: pwm-f-z {
- mux {
- groups = "pwm_f_z";
- function = "pwm_f";
- bias-disable;
- };
- };
-
- pwm_f_a_pins: pwm-f-a {
- mux {
- groups = "pwm_f_a";
- function = "pwm_f";
- bias-disable;
- };
- };
-
- pwm_f_x_pins: pwm-f-x {
- mux {
- groups = "pwm_f_x";
- function = "pwm_f";
- bias-disable;
- };
- };
-
- pwm_f_h_pins: pwm-f-h {
- mux {
- groups = "pwm_f_h";
- function = "pwm_f";
- bias-disable;
- };
- };
-
- sdcard_c_pins: sdcard_c {
- mux-0 {
- groups = "sdcard_d0_c",
- "sdcard_d1_c",
- "sdcard_d2_c",
- "sdcard_d3_c",
- "sdcard_cmd_c";
- function = "sdcard";
- bias-pull-up;
- drive-strength-microamp = <4000>;
- };
-
- mux-1 {
- groups = "sdcard_clk_c";
- function = "sdcard";
- bias-disable;
- drive-strength-microamp = <4000>;
- };
- };
-
- sdcard_clk_gate_c_pins: sdcard_clk_gate_c {
- mux {
- groups = "GPIOC_4";
- function = "gpio_periphs";
- bias-pull-down;
- drive-strength-microamp = <4000>;
- };
- };
-
- sdcard_z_pins: sdcard_z {
- mux-0 {
- groups = "sdcard_d0_z",
- "sdcard_d1_z",
- "sdcard_d2_z",
- "sdcard_d3_z",
- "sdcard_cmd_z";
- function = "sdcard";
- bias-pull-up;
- drive-strength-microamp = <4000>;
- };
-
- mux-1 {
- groups = "sdcard_clk_z";
- function = "sdcard";
- bias-disable;
- drive-strength-microamp = <4000>;
- };
- };
-
- sdcard_clk_gate_z_pins: sdcard_clk_gate_z {
- mux {
- groups = "GPIOZ_6";
- function = "gpio_periphs";
- bias-pull-down;
- drive-strength-microamp = <4000>;
- };
- };
-
- sdio_pins: sdio {
- mux {
- groups = "sdio_d0",
- "sdio_d1",
- "sdio_d2",
- "sdio_d3",
- "sdio_clk",
- "sdio_cmd";
- function = "sdio";
- bias-disable;
- drive-strength-microamp = <4000>;
- };
- };
-
- sdio_clk_gate_pins: sdio_clk_gate {
- mux {
- groups = "GPIOX_4";
- function = "gpio_periphs";
- bias-pull-down;
- drive-strength-microamp = <4000>;
- };
- };
-
- spdif_in_a10_pins: spdif-in-a10 {
- mux {
- groups = "spdif_in_a10";
- function = "spdif_in";
- bias-disable;
- };
- };
-
- spdif_in_a12_pins: spdif-in-a12 {
- mux {
- groups = "spdif_in_a12";
- function = "spdif_in";
- bias-disable;
- };
- };
-
- spdif_in_h_pins: spdif-in-h {
- mux {
- groups = "spdif_in_h";
- function = "spdif_in";
- bias-disable;
- };
- };
-
- spdif_out_h_pins: spdif-out-h {
- mux {
- groups = "spdif_out_h";
- function = "spdif_out";
- drive-strength-microamp = <500>;
- bias-disable;
- };
- };
-
- spdif_out_a11_pins: spdif-out-a11 {
- mux {
- groups = "spdif_out_a11";
- function = "spdif_out";
- drive-strength-microamp = <500>;
- bias-disable;
- };
- };
-
- spdif_out_a13_pins: spdif-out-a13 {
- mux {
- groups = "spdif_out_a13";
- function = "spdif_out";
- drive-strength-microamp = <500>;
- bias-disable;
- };
- };
-
- spicc0_x_pins: spicc0-x {
- mux {
- groups = "spi0_mosi_x",
- "spi0_miso_x",
- "spi0_clk_x";
- function = "spi0";
- drive-strength-microamp = <4000>;
- bias-disable;
- };
- };
-
- spicc0_ss0_x_pins: spicc0-ss0-x {
- mux {
- groups = "spi0_ss0_x";
- function = "spi0";
- drive-strength-microamp = <4000>;
- bias-disable;
- };
- };
-
- spicc0_c_pins: spicc0-c {
- mux {
- groups = "spi0_mosi_c",
- "spi0_miso_c",
- "spi0_ss0_c",
- "spi0_clk_c";
- function = "spi0";
- drive-strength-microamp = <4000>;
- bias-disable;
- };
- };
-
- spicc1_pins: spicc1 {
- mux {
- groups = "spi1_mosi",
- "spi1_miso",
- "spi1_clk";
- function = "spi1";
- drive-strength-microamp = <4000>;
- };
- };
-
- spicc1_ss0_pins: spicc1-ss0 {
- mux {
- groups = "spi1_ss0";
- function = "spi1";
- drive-strength-microamp = <4000>;
- bias-disable;
- };
- };
-
- tdm_a_din0_pins: tdm-a-din0 {
- mux {
- groups = "tdm_a_din0";
- function = "tdm_a";
- bias-disable;
- };
- };
-
-
- tdm_a_din1_pins: tdm-a-din1 {
- mux {
- groups = "tdm_a_din1";
- function = "tdm_a";
- bias-disable;
- };
- };
-
- tdm_a_dout0_pins: tdm-a-dout0 {
- mux {
- groups = "tdm_a_dout0";
- function = "tdm_a";
- bias-disable;
- drive-strength-microamp = <3000>;
- };
- };
-
- tdm_a_dout1_pins: tdm-a-dout1 {
- mux {
- groups = "tdm_a_dout1";
- function = "tdm_a";
- bias-disable;
- drive-strength-microamp = <3000>;
- };
- };
-
- tdm_a_fs_pins: tdm-a-fs {
- mux {
- groups = "tdm_a_fs";
- function = "tdm_a";
- bias-disable;
- drive-strength-microamp = <3000>;
- };
- };
-
- tdm_a_sclk_pins: tdm-a-sclk {
- mux {
- groups = "tdm_a_sclk";
- function = "tdm_a";
- bias-disable;
- drive-strength-microamp = <3000>;
- };
- };
-
- tdm_a_slv_fs_pins: tdm-a-slv-fs {
- mux {
- groups = "tdm_a_slv_fs";
- function = "tdm_a";
- bias-disable;
- };
- };
-
-
- tdm_a_slv_sclk_pins: tdm-a-slv-sclk {
- mux {
- groups = "tdm_a_slv_sclk";
- function = "tdm_a";
- bias-disable;
- };
- };
-
- tdm_b_din0_pins: tdm-b-din0 {
- mux {
- groups = "tdm_b_din0";
- function = "tdm_b";
- bias-disable;
- };
- };
-
- tdm_b_din1_pins: tdm-b-din1 {
- mux {
- groups = "tdm_b_din1";
- function = "tdm_b";
- bias-disable;
- };
- };
-
- tdm_b_din2_pins: tdm-b-din2 {
- mux {
- groups = "tdm_b_din2";
- function = "tdm_b";
- bias-disable;
- };
- };
-
- tdm_b_din3_a_pins: tdm-b-din3-a {
- mux {
- groups = "tdm_b_din3_a";
- function = "tdm_b";
- bias-disable;
- };
- };
-
- tdm_b_din3_h_pins: tdm-b-din3-h {
- mux {
- groups = "tdm_b_din3_h";
- function = "tdm_b";
- bias-disable;
- };
- };
-
- tdm_b_dout0_pins: tdm-b-dout0 {
- mux {
- groups = "tdm_b_dout0";
- function = "tdm_b";
- bias-disable;
- drive-strength-microamp = <3000>;
- };
- };
-
- tdm_b_dout1_pins: tdm-b-dout1 {
- mux {
- groups = "tdm_b_dout1";
- function = "tdm_b";
- bias-disable;
- drive-strength-microamp = <3000>;
- };
- };
-
- tdm_b_dout2_pins: tdm-b-dout2 {
- mux {
- groups = "tdm_b_dout2";
- function = "tdm_b";
- bias-disable;
- drive-strength-microamp = <3000>;
- };
- };
-
- tdm_b_dout3_a_pins: tdm-b-dout3-a {
- mux {
- groups = "tdm_b_dout3_a";
- function = "tdm_b";
- bias-disable;
- drive-strength-microamp = <3000>;
- };
- };
-
- tdm_b_dout3_h_pins: tdm-b-dout3-h {
- mux {
- groups = "tdm_b_dout3_h";
- function = "tdm_b";
- bias-disable;
- drive-strength-microamp = <3000>;
- };
- };
-
- tdm_b_fs_pins: tdm-b-fs {
- mux {
- groups = "tdm_b_fs";
- function = "tdm_b";
- bias-disable;
- drive-strength-microamp = <3000>;
- };
- };
-
- tdm_b_sclk_pins: tdm-b-sclk {
- mux {
- groups = "tdm_b_sclk";
- function = "tdm_b";
- bias-disable;
- drive-strength-microamp = <3000>;
- };
- };
-
- tdm_b_slv_fs_pins: tdm-b-slv-fs {
- mux {
- groups = "tdm_b_slv_fs";
- function = "tdm_b";
- bias-disable;
- };
- };
-
- tdm_b_slv_sclk_pins: tdm-b-slv-sclk {
- mux {
- groups = "tdm_b_slv_sclk";
- function = "tdm_b";
- bias-disable;
- };
- };
-
- tdm_c_din0_a_pins: tdm-c-din0-a {
- mux {
- groups = "tdm_c_din0_a";
- function = "tdm_c";
- bias-disable;
- };
- };
-
- tdm_c_din0_z_pins: tdm-c-din0-z {
- mux {
- groups = "tdm_c_din0_z";
- function = "tdm_c";
- bias-disable;
- };
- };
-
- tdm_c_din1_a_pins: tdm-c-din1-a {
- mux {
- groups = "tdm_c_din1_a";
- function = "tdm_c";
- bias-disable;
- };
- };
-
- tdm_c_din1_z_pins: tdm-c-din1-z {
- mux {
- groups = "tdm_c_din1_z";
- function = "tdm_c";
- bias-disable;
- };
- };
-
- tdm_c_din2_a_pins: tdm-c-din2-a {
- mux {
- groups = "tdm_c_din2_a";
- function = "tdm_c";
- bias-disable;
- };
- };
-
- eth_leds_pins: eth-leds {
- mux {
- groups = "eth_link_led",
- "eth_act_led";
- function = "eth";
- bias-disable;
- };
- };
-
- eth_pins: eth {
- mux {
- groups = "eth_mdio",
- "eth_mdc",
- "eth_rgmii_rx_clk",
- "eth_rx_dv",
- "eth_rxd0",
- "eth_rxd1",
- "eth_txen",
- "eth_txd0",
- "eth_txd1";
- function = "eth";
- drive-strength-microamp = <4000>;
- bias-disable;
- };
- };
-
- eth_rgmii_pins: eth-rgmii {
- mux {
- groups = "eth_rxd2_rgmii",
- "eth_rxd3_rgmii",
- "eth_rgmii_tx_clk",
- "eth_txd2_rgmii",
- "eth_txd3_rgmii";
- function = "eth";
- drive-strength-microamp = <4000>;
- bias-disable;
- };
- };
-
- tdm_c_din2_z_pins: tdm-c-din2-z {
- mux {
- groups = "tdm_c_din2_z";
- function = "tdm_c";
- bias-disable;
- };
- };
-
- tdm_c_din3_a_pins: tdm-c-din3-a {
- mux {
- groups = "tdm_c_din3_a";
- function = "tdm_c";
- bias-disable;
- };
- };
-
- tdm_c_din3_z_pins: tdm-c-din3-z {
- mux {
- groups = "tdm_c_din3_z";
- function = "tdm_c";
- bias-disable;
- };
- };
-
- tdm_c_dout0_a_pins: tdm-c-dout0-a {
- mux {
- groups = "tdm_c_dout0_a";
- function = "tdm_c";
- bias-disable;
- drive-strength-microamp = <3000>;
- };
- };
-
- tdm_c_dout0_z_pins: tdm-c-dout0-z {
- mux {
- groups = "tdm_c_dout0_z";
- function = "tdm_c";
- bias-disable;
- drive-strength-microamp = <3000>;
- };
- };
-
- tdm_c_dout1_a_pins: tdm-c-dout1-a {
- mux {
- groups = "tdm_c_dout1_a";
- function = "tdm_c";
- bias-disable;
- drive-strength-microamp = <3000>;
- };
- };
-
- tdm_c_dout1_z_pins: tdm-c-dout1-z {
- mux {
- groups = "tdm_c_dout1_z";
- function = "tdm_c";
- bias-disable;
- drive-strength-microamp = <3000>;
- };
- };
-
- tdm_c_dout2_a_pins: tdm-c-dout2-a {
- mux {
- groups = "tdm_c_dout2_a";
- function = "tdm_c";
- bias-disable;
- drive-strength-microamp = <3000>;
- };
- };
-
- tdm_c_dout2_z_pins: tdm-c-dout2-z {
- mux {
- groups = "tdm_c_dout2_z";
- function = "tdm_c";
- bias-disable;
- drive-strength-microamp = <3000>;
- };
- };
-
- tdm_c_dout3_a_pins: tdm-c-dout3-a {
- mux {
- groups = "tdm_c_dout3_a";
- function = "tdm_c";
- bias-disable;
- drive-strength-microamp = <3000>;
- };
- };
-
- tdm_c_dout3_z_pins: tdm-c-dout3-z {
- mux {
- groups = "tdm_c_dout3_z";
- function = "tdm_c";
- bias-disable;
- drive-strength-microamp = <3000>;
- };
- };
-
- tdm_c_fs_a_pins: tdm-c-fs-a {
- mux {
- groups = "tdm_c_fs_a";
- function = "tdm_c";
- bias-disable;
- drive-strength-microamp = <3000>;
- };
- };
-
- tdm_c_fs_z_pins: tdm-c-fs-z {
- mux {
- groups = "tdm_c_fs_z";
- function = "tdm_c";
- bias-disable;
- drive-strength-microamp = <3000>;
- };
- };
-
- tdm_c_sclk_a_pins: tdm-c-sclk-a {
- mux {
- groups = "tdm_c_sclk_a";
- function = "tdm_c";
- bias-disable;
- drive-strength-microamp = <3000>;
- };
- };
-
- tdm_c_sclk_z_pins: tdm-c-sclk-z {
- mux {
- groups = "tdm_c_sclk_z";
- function = "tdm_c";
- bias-disable;
- drive-strength-microamp = <3000>;
- };
- };
-
- tdm_c_slv_fs_a_pins: tdm-c-slv-fs-a {
- mux {
- groups = "tdm_c_slv_fs_a";
- function = "tdm_c";
- bias-disable;
- };
- };
-
- tdm_c_slv_fs_z_pins: tdm-c-slv-fs-z {
- mux {
- groups = "tdm_c_slv_fs_z";
- function = "tdm_c";
- bias-disable;
- };
- };
-
- tdm_c_slv_sclk_a_pins: tdm-c-slv-sclk-a {
- mux {
- groups = "tdm_c_slv_sclk_a";
- function = "tdm_c";
- bias-disable;
- };
- };
-
- tdm_c_slv_sclk_z_pins: tdm-c-slv-sclk-z {
- mux {
- groups = "tdm_c_slv_sclk_z";
- function = "tdm_c";
- bias-disable;
- };
- };
-
- uart_a_pins: uart-a {
- mux {
- groups = "uart_a_tx",
- "uart_a_rx";
- function = "uart_a";
- bias-disable;
- };
- };
-
- uart_a_cts_rts_pins: uart-a-cts-rts {
- mux {
- groups = "uart_a_cts",
- "uart_a_rts";
- function = "uart_a";
- bias-disable;
- };
- };
-
- uart_b_pins: uart-b {
- mux {
- groups = "uart_b_tx",
- "uart_b_rx";
- function = "uart_b";
- bias-disable;
- };
- };
-
- uart_c_pins: uart-c {
- mux {
- groups = "uart_c_tx",
- "uart_c_rx";
- function = "uart_c";
- bias-disable;
- };
- };
-
- uart_c_cts_rts_pins: uart-c-cts-rts {
- mux {
- groups = "uart_c_cts",
- "uart_c_rts";
- function = "uart_c";
- bias-disable;
- };
- };
- };
- };
-
- cpu_temp: temperature-sensor at 34800 {
- compatible = "amlogic,g12a-cpu-thermal",
- "amlogic,g12a-thermal";
- reg = <0x0 0x34800 0x0 0x50>;
- interrupts = <GIC_SPI 35 IRQ_TYPE_EDGE_RISING>;
- clocks = <&clkc CLKID_TS>;
- #thermal-sensor-cells = <0>;
- amlogic,ao-secure = <&sec_AO>;
- };
-
- ddr_temp: temperature-sensor at 34c00 {
- compatible = "amlogic,g12a-ddr-thermal",
- "amlogic,g12a-thermal";
- reg = <0x0 0x34c00 0x0 0x50>;
- interrupts = <GIC_SPI 36 IRQ_TYPE_EDGE_RISING>;
- clocks = <&clkc CLKID_TS>;
- #thermal-sensor-cells = <0>;
- amlogic,ao-secure = <&sec_AO>;
- };
-
- usb2_phy0: phy at 36000 {
- compatible = "amlogic,g12a-usb2-phy";
- reg = <0x0 0x36000 0x0 0x2000>;
- clocks = <&xtal>;
- clock-names = "xtal";
- resets = <&reset RESET_USB_PHY20>;
- reset-names = "phy";
- #phy-cells = <0>;
- };
-
- dmc: bus at 38000 {
- compatible = "simple-bus";
- reg = <0x0 0x38000 0x0 0x400>;
- #address-cells = <2>;
- #size-cells = <2>;
- ranges = <0x0 0x0 0x0 0x38000 0x0 0x400>;
-
- canvas: video-lut at 48 {
- compatible = "amlogic,canvas";
- reg = <0x0 0x48 0x0 0x14>;
- };
- };
-
- usb2_phy1: phy at 3a000 {
- compatible = "amlogic,g12a-usb2-phy";
- reg = <0x0 0x3a000 0x0 0x2000>;
- clocks = <&xtal>;
- clock-names = "xtal";
- resets = <&reset RESET_USB_PHY21>;
- reset-names = "phy";
- #phy-cells = <0>;
- };
-
- hiu: bus at 3c000 {
- compatible = "simple-bus";
- reg = <0x0 0x3c000 0x0 0x1400>;
- #address-cells = <2>;
- #size-cells = <2>;
- ranges = <0x0 0x0 0x0 0x3c000 0x0 0x1400>;
-
- hhi: system-controller at 0 {
- compatible = "amlogic,meson-gx-hhi-sysctrl",
- "simple-mfd", "syscon";
- reg = <0 0 0 0x400>;
-
- clkc: clock-controller {
- compatible = "amlogic,g12a-clkc";
- #clock-cells = <1>;
- clocks = <&xtal>;
- clock-names = "xtal";
- };
-
- pwrc: power-controller {
- compatible = "amlogic,meson-g12a-pwrc";
- #power-domain-cells = <1>;
- amlogic,ao-sysctrl = <&rti>;
- resets = <&reset RESET_VIU>,
- <&reset RESET_VENC>,
- <&reset RESET_VCBUS>,
- <&reset RESET_BT656>,
- <&reset RESET_RDMA>,
- <&reset RESET_VENCI>,
- <&reset RESET_VENCP>,
- <&reset RESET_VDAC>,
- <&reset RESET_VDI6>,
- <&reset RESET_VENCL>,
- <&reset RESET_VID_LOCK>;
- reset-names = "viu", "venc", "vcbus", "bt656",
- "rdma", "venci", "vencp", "vdac",
- "vdi6", "vencl", "vid_lock";
- clocks = <&clkc CLKID_VPU>,
- <&clkc CLKID_VAPB>;
- clock-names = "vpu", "vapb";
- /*
- * VPU clocking is provided by two identical clock paths
- * VPU_0 and VPU_1 muxed to a single clock by a glitch
- * free mux to safely change frequency while running.
- * Same for VAPB but with a final gate after the glitch free mux.
- */
- assigned-clocks = <&clkc CLKID_VPU_0_SEL>,
- <&clkc CLKID_VPU_0>,
- <&clkc CLKID_VPU>, /* Glitch free mux */
- <&clkc CLKID_VAPB_0_SEL>,
- <&clkc CLKID_VAPB_0>,
- <&clkc CLKID_VAPB_SEL>; /* Glitch free mux */
- assigned-clock-parents = <&clkc CLKID_FCLK_DIV3>,
- <0>, /* Do Nothing */
- <&clkc CLKID_VPU_0>,
- <&clkc CLKID_FCLK_DIV4>,
- <0>, /* Do Nothing */
- <&clkc CLKID_VAPB_0>;
- assigned-clock-rates = <0>, /* Do Nothing */
- <666666666>,
- <0>, /* Do Nothing */
- <0>, /* Do Nothing */
- <250000000>,
- <0>; /* Do Nothing */
- };
- };
- };
-
- usb3_pcie_phy: phy at 46000 {
- compatible = "amlogic,g12a-usb3-pcie-phy";
- reg = <0x0 0x46000 0x0 0x2000>;
- clocks = <&clkc CLKID_PCIE_PLL>;
- clock-names = "ref_clk";
- resets = <&reset RESET_PCIE_PHY>;
- reset-names = "phy";
- assigned-clocks = <&clkc CLKID_PCIE_PLL>;
- assigned-clock-rates = <100000000>;
- #phy-cells = <1>;
- };
-
- eth_phy: mdio-multiplexer at 4c000 {
- compatible = "amlogic,g12a-mdio-mux";
- reg = <0x0 0x4c000 0x0 0xa4>;
- clocks = <&clkc CLKID_ETH_PHY>,
- <&xtal>,
- <&clkc CLKID_MPLL_50M>;
- clock-names = "pclk", "clkin0", "clkin1";
- mdio-parent-bus = <&mdio0>;
- #address-cells = <1>;
- #size-cells = <0>;
-
- ext_mdio: mdio at 0 {
- reg = <0>;
- #address-cells = <1>;
- #size-cells = <0>;
- };
-
- int_mdio: mdio at 1 {
- reg = <1>;
- #address-cells = <1>;
- #size-cells = <0>;
-
- internal_ephy: ethernet_phy at 8 {
- compatible = "ethernet-phy-id0180.3301",
- "ethernet-phy-ieee802.3-c22";
- interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
- reg = <8>;
- max-speed = <100>;
- };
- };
- };
- };
-
- pmu: pmu at ff638000 {
- reg = <0x0 0xff638000 0x0 0x100>,
- <0x0 0xff638c00 0x0 0x100>;
- interrupts = <GIC_SPI 52 IRQ_TYPE_EDGE_RISING>;
- };
-
- aobus: bus at ff800000 {
- compatible = "simple-bus";
- reg = <0x0 0xff800000 0x0 0x100000>;
- #address-cells = <2>;
- #size-cells = <2>;
- ranges = <0x0 0x0 0x0 0xff800000 0x0 0x100000>;
-
- rti: sys-ctrl at 0 {
- compatible = "amlogic,meson-gx-ao-sysctrl",
- "simple-mfd", "syscon";
- reg = <0x0 0x0 0x0 0x100>;
- #address-cells = <2>;
- #size-cells = <2>;
- ranges = <0x0 0x0 0x0 0x0 0x0 0x100>;
-
- clkc_AO: clock-controller {
- compatible = "amlogic,meson-g12a-aoclkc";
- #clock-cells = <1>;
- #reset-cells = <1>;
- clocks = <&xtal>, <&clkc CLKID_CLK81>;
- clock-names = "xtal", "mpeg-clk";
- };
-
- ao_pinctrl: pinctrl at 14 {
- compatible = "amlogic,meson-g12a-aobus-pinctrl";
- #address-cells = <2>;
- #size-cells = <2>;
- ranges;
-
- gpio_ao: bank at 14 {
- reg = <0x0 0x14 0x0 0x8>,
- <0x0 0x1c 0x0 0x8>,
- <0x0 0x24 0x0 0x14>;
- reg-names = "mux",
- "ds",
- "gpio";
- gpio-controller;
- #gpio-cells = <2>;
- gpio-ranges = <&ao_pinctrl 0 0 15>;
- };
-
- i2c_ao_sck_pins: i2c_ao_sck_pins {
- mux {
- groups = "i2c_ao_sck";
- function = "i2c_ao";
- bias-disable;
- drive-strength-microamp = <3000>;
- };
- };
-
- i2c_ao_sda_pins: i2c_ao_sda {
- mux {
- groups = "i2c_ao_sda";
- function = "i2c_ao";
- bias-disable;
- drive-strength-microamp = <3000>;
- };
- };
-
- i2c_ao_sck_e_pins: i2c_ao_sck_e {
- mux {
- groups = "i2c_ao_sck_e";
- function = "i2c_ao";
- bias-disable;
- drive-strength-microamp = <3000>;
- };
- };
-
- i2c_ao_sda_e_pins: i2c_ao_sda_e {
- mux {
- groups = "i2c_ao_sda_e";
- function = "i2c_ao";
- bias-disable;
- drive-strength-microamp = <3000>;
- };
- };
-
- mclk0_ao_pins: mclk0-ao {
- mux {
- groups = "mclk0_ao";
- function = "mclk0_ao";
- bias-disable;
- drive-strength-microamp = <3000>;
- };
- };
-
- tdm_ao_b_din0_pins: tdm-ao-b-din0 {
- mux {
- groups = "tdm_ao_b_din0";
- function = "tdm_ao_b";
- bias-disable;
- };
- };
-
- spdif_ao_out_pins: spdif-ao-out {
- mux {
- groups = "spdif_ao_out";
- function = "spdif_ao_out";
- drive-strength-microamp = <500>;
- bias-disable;
- };
- };
-
- tdm_ao_b_din1_pins: tdm-ao-b-din1 {
- mux {
- groups = "tdm_ao_b_din1";
- function = "tdm_ao_b";
- bias-disable;
- };
- };
-
- tdm_ao_b_din2_pins: tdm-ao-b-din2 {
- mux {
- groups = "tdm_ao_b_din2";
- function = "tdm_ao_b";
- bias-disable;
- };
- };
-
- tdm_ao_b_dout0_pins: tdm-ao-b-dout0 {
- mux {
- groups = "tdm_ao_b_dout0";
- function = "tdm_ao_b";
- bias-disable;
- drive-strength-microamp = <3000>;
- };
- };
-
- tdm_ao_b_dout1_pins: tdm-ao-b-dout1 {
- mux {
- groups = "tdm_ao_b_dout1";
- function = "tdm_ao_b";
- bias-disable;
- drive-strength-microamp = <3000>;
- };
- };
-
- tdm_ao_b_dout2_pins: tdm-ao-b-dout2 {
- mux {
- groups = "tdm_ao_b_dout2";
- function = "tdm_ao_b";
- bias-disable;
- drive-strength-microamp = <3000>;
- };
- };
-
- tdm_ao_b_fs_pins: tdm-ao-b-fs {
- mux {
- groups = "tdm_ao_b_fs";
- function = "tdm_ao_b";
- bias-disable;
- drive-strength-microamp = <3000>;
- };
- };
-
- tdm_ao_b_sclk_pins: tdm-ao-b-sclk {
- mux {
- groups = "tdm_ao_b_sclk";
- function = "tdm_ao_b";
- bias-disable;
- drive-strength-microamp = <3000>;
- };
- };
-
- tdm_ao_b_slv_fs_pins: tdm-ao-b-slv-fs {
- mux {
- groups = "tdm_ao_b_slv_fs";
- function = "tdm_ao_b";
- bias-disable;
- };
- };
-
- tdm_ao_b_slv_sclk_pins: tdm-ao-b-slv-sclk {
- mux {
- groups = "tdm_ao_b_slv_sclk";
- function = "tdm_ao_b";
- bias-disable;
- };
- };
-
- uart_ao_a_pins: uart-a-ao {
- mux {
- groups = "uart_ao_a_tx",
- "uart_ao_a_rx";
- function = "uart_ao_a";
- bias-disable;
- };
- };
-
- uart_ao_a_cts_rts_pins: uart-ao-a-cts-rts {
- mux {
- groups = "uart_ao_a_cts",
- "uart_ao_a_rts";
- function = "uart_ao_a";
- bias-disable;
- };
- };
-
- uart_ao_b_2_3_pins: uart-ao-b-2-3 {
- mux {
- groups = "uart_ao_b_tx_2",
- "uart_ao_b_rx_3";
- function = "uart_ao_b";
- bias-disable;
- };
- };
-
- uart_ao_b_8_9_pins: uart-ao-b-8-9 {
- mux {
- groups = "uart_ao_b_tx_8",
- "uart_ao_b_rx_9";
- function = "uart_ao_b";
- bias-disable;
- };
- };
-
- uart_ao_b_cts_rts_pins: uart-ao-b-cts-rts {
- mux {
- groups = "uart_ao_b_cts",
- "uart_ao_b_rts";
- function = "uart_ao_b";
- bias-disable;
- };
- };
-
- pwm_a_e_pins: pwm-a-e {
- mux {
- groups = "pwm_a_e";
- function = "pwm_a_e";
- bias-disable;
- };
- };
-
- pwm_ao_a_pins: pwm-ao-a {
- mux {
- groups = "pwm_ao_a";
- function = "pwm_ao_a";
- bias-disable;
- };
- };
-
- pwm_ao_b_pins: pwm-ao-b {
- mux {
- groups = "pwm_ao_b";
- function = "pwm_ao_b";
- bias-disable;
- };
- };
-
- pwm_ao_c_4_pins: pwm-ao-c-4 {
- mux {
- groups = "pwm_ao_c_4";
- function = "pwm_ao_c";
- bias-disable;
- };
- };
-
- pwm_ao_c_6_pins: pwm-ao-c-6 {
- mux {
- groups = "pwm_ao_c_6";
- function = "pwm_ao_c";
- bias-disable;
- };
- };
-
- pwm_ao_d_5_pins: pwm-ao-d-5 {
- mux {
- groups = "pwm_ao_d_5";
- function = "pwm_ao_d";
- bias-disable;
- };
- };
-
- pwm_ao_d_10_pins: pwm-ao-d-10 {
- mux {
- groups = "pwm_ao_d_10";
- function = "pwm_ao_d";
- bias-disable;
- };
- };
-
- pwm_ao_d_e_pins: pwm-ao-d-e {
- mux {
- groups = "pwm_ao_d_e";
- function = "pwm_ao_d";
- };
- };
-
- remote_input_ao_pins: remote-input-ao {
- mux {
- groups = "remote_ao_input";
- function = "remote_ao_input";
- bias-disable;
- };
- };
- };
- };
-
- vrtc: rtc at a8 {
- compatible = "amlogic,meson-vrtc";
- reg = <0x0 0x000a8 0x0 0x4>;
- };
-
- cec_AO: cec at 100 {
- compatible = "amlogic,meson-gx-ao-cec";
- reg = <0x0 0x00100 0x0 0x14>;
- interrupts = <GIC_SPI 199 IRQ_TYPE_EDGE_RISING>;
- clocks = <&clkc_AO CLKID_AO_CEC>;
- clock-names = "core";
- status = "disabled";
- };
-
- sec_AO: ao-secure at 140 {
- compatible = "amlogic,meson-gx-ao-secure", "syscon";
- reg = <0x0 0x140 0x0 0x140>;
- amlogic,has-chip-id;
- };
-
- cecb_AO: cec at 280 {
- compatible = "amlogic,meson-g12a-ao-cec";
- reg = <0x0 0x00280 0x0 0x1c>;
- interrupts = <GIC_SPI 203 IRQ_TYPE_EDGE_RISING>;
- clocks = <&clkc_AO CLKID_AO_CTS_OSCIN>;
- clock-names = "oscin";
- status = "disabled";
- };
-
- pwm_AO_cd: pwm at 2000 {
- compatible = "amlogic,meson-g12a-ao-pwm-cd";
- reg = <0x0 0x2000 0x0 0x20>;
- #pwm-cells = <3>;
- status = "disabled";
- };
-
- uart_AO: serial at 3000 {
- compatible = "amlogic,meson-gx-uart",
- "amlogic,meson-ao-uart";
- reg = <0x0 0x3000 0x0 0x18>;
- interrupts = <GIC_SPI 193 IRQ_TYPE_EDGE_RISING>;
- clocks = <&xtal>, <&clkc_AO CLKID_AO_UART>, <&xtal>;
- clock-names = "xtal", "pclk", "baud";
- status = "disabled";
- };
-
- uart_AO_B: serial at 4000 {
- compatible = "amlogic,meson-gx-uart",
- "amlogic,meson-ao-uart";
- reg = <0x0 0x4000 0x0 0x18>;
- interrupts = <GIC_SPI 197 IRQ_TYPE_EDGE_RISING>;
- clocks = <&xtal>, <&clkc_AO CLKID_AO_UART2>, <&xtal>;
- clock-names = "xtal", "pclk", "baud";
- status = "disabled";
- };
-
- i2c_AO: i2c at 5000 {
- compatible = "amlogic,meson-axg-i2c";
- status = "disabled";
- reg = <0x0 0x05000 0x0 0x20>;
- interrupts = <GIC_SPI 195 IRQ_TYPE_EDGE_RISING>;
- #address-cells = <1>;
- #size-cells = <0>;
- clocks = <&clkc CLKID_I2C>;
- };
-
- pwm_AO_ab: pwm at 7000 {
- compatible = "amlogic,meson-g12a-ao-pwm-ab";
- reg = <0x0 0x7000 0x0 0x20>;
- #pwm-cells = <3>;
- status = "disabled";
- };
-
- ir: ir at 8000 {
- compatible = "amlogic,meson-gxbb-ir";
- reg = <0x0 0x8000 0x0 0x20>;
- interrupts = <GIC_SPI 196 IRQ_TYPE_EDGE_RISING>;
- status = "disabled";
- };
-
- saradc: adc at 9000 {
- compatible = "amlogic,meson-g12a-saradc",
- "amlogic,meson-saradc";
- reg = <0x0 0x9000 0x0 0x48>;
- #io-channel-cells = <1>;
- interrupts = <GIC_SPI 200 IRQ_TYPE_EDGE_RISING>;
- clocks = <&xtal>,
- <&clkc_AO CLKID_AO_SAR_ADC>,
- <&clkc_AO CLKID_AO_SAR_ADC_CLK>,
- <&clkc_AO CLKID_AO_SAR_ADC_SEL>;
- clock-names = "clkin", "core", "adc_clk", "adc_sel";
- status = "disabled";
- };
- };
-
- vdec: video-decoder at ff620000 {
- compatible = "amlogic,g12a-vdec";
- reg = <0x0 0xff620000 0x0 0x10000>,
- <0x0 0xffd0e180 0x0 0xe4>;
- reg-names = "dos", "esparser";
- interrupts = <GIC_SPI 44 IRQ_TYPE_EDGE_RISING>,
- <GIC_SPI 32 IRQ_TYPE_EDGE_RISING>;
- interrupt-names = "vdec", "esparser";
-
- amlogic,ao-sysctrl = <&rti>;
- amlogic,canvas = <&canvas>;
-
- clocks = <&clkc CLKID_PARSER>,
- <&clkc CLKID_DOS>,
- <&clkc CLKID_VDEC_1>,
- <&clkc CLKID_VDEC_HEVC>,
- <&clkc CLKID_VDEC_HEVCF>;
- clock-names = "dos_parser", "dos", "vdec_1",
- "vdec_hevc", "vdec_hevcf";
- resets = <&reset RESET_PARSER>;
- reset-names = "esparser";
- };
-
- vpu: vpu at ff900000 {
- compatible = "amlogic,meson-g12a-vpu";
- reg = <0x0 0xff900000 0x0 0x100000>,
- <0x0 0xff63c000 0x0 0x1000>;
- reg-names = "vpu", "hhi";
- interrupts = <GIC_SPI 3 IRQ_TYPE_EDGE_RISING>;
- #address-cells = <1>;
- #size-cells = <0>;
- amlogic,canvas = <&canvas>;
-
- /* CVBS VDAC output port */
- cvbs_vdac_port: port at 0 {
- reg = <0>;
- };
-
- /* HDMI-TX output port */
- hdmi_tx_port: port at 1 {
- reg = <1>;
-
- hdmi_tx_out: endpoint {
- remote-endpoint = <&hdmi_tx_in>;
- };
- };
- };
-
- gic: interrupt-controller at ffc01000 {
- compatible = "arm,gic-400";
- reg = <0x0 0xffc01000 0 0x1000>,
- <0x0 0xffc02000 0 0x2000>,
- <0x0 0xffc04000 0 0x2000>,
- <0x0 0xffc06000 0 0x2000>;
- interrupt-controller;
- interrupts = <GIC_PPI 9
- (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_HIGH)>;
- #interrupt-cells = <3>;
- #address-cells = <0>;
- };
-
- cbus: bus at ffd00000 {
- compatible = "simple-bus";
- reg = <0x0 0xffd00000 0x0 0x100000>;
- #address-cells = <2>;
- #size-cells = <2>;
- ranges = <0x0 0x0 0x0 0xffd00000 0x0 0x100000>;
-
- reset: reset-controller at 1004 {
- compatible = "amlogic,meson-axg-reset";
- reg = <0x0 0x1004 0x0 0x9c>;
- #reset-cells = <1>;
- };
-
- gpio_intc: interrupt-controller at f080 {
- compatible = "amlogic,meson-g12a-gpio-intc",
- "amlogic,meson-gpio-intc";
- reg = <0x0 0xf080 0x0 0x10>;
- interrupt-controller;
- #interrupt-cells = <2>;
- amlogic,channel-interrupts = <64 65 66 67 68 69 70 71>;
- };
-
- watchdog: watchdog at f0d0 {
- compatible = "amlogic,meson-gxbb-wdt";
- reg = <0x0 0xf0d0 0x0 0x10>;
- clocks = <&xtal>;
- };
-
- spicc0: spi at 13000 {
- compatible = "amlogic,meson-g12a-spicc";
- reg = <0x0 0x13000 0x0 0x44>;
- interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clkc CLKID_SPICC0>,
- <&clkc CLKID_SPICC0_SCLK>;
- clock-names = "core", "pclk";
- #address-cells = <1>;
- #size-cells = <0>;
- status = "disabled";
- };
-
- spicc1: spi at 15000 {
- compatible = "amlogic,meson-g12a-spicc";
- reg = <0x0 0x15000 0x0 0x44>;
- interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clkc CLKID_SPICC1>,
- <&clkc CLKID_SPICC1_SCLK>;
- clock-names = "core", "pclk";
- #address-cells = <1>;
- #size-cells = <0>;
- status = "disabled";
- };
-
- spifc: spi at 14000 {
- compatible = "amlogic,meson-gxbb-spifc";
- status = "disabled";
- reg = <0x0 0x14000 0x0 0x80>;
- #address-cells = <1>;
- #size-cells = <0>;
- clocks = <&clkc CLKID_CLK81>;
- };
-
- pwm_ef: pwm at 19000 {
- compatible = "amlogic,meson-g12a-ee-pwm";
- reg = <0x0 0x19000 0x0 0x20>;
- #pwm-cells = <3>;
- status = "disabled";
- };
-
- pwm_cd: pwm at 1a000 {
- compatible = "amlogic,meson-g12a-ee-pwm";
- reg = <0x0 0x1a000 0x0 0x20>;
- #pwm-cells = <3>;
- status = "disabled";
- };
-
- pwm_ab: pwm at 1b000 {
- compatible = "amlogic,meson-g12a-ee-pwm";
- reg = <0x0 0x1b000 0x0 0x20>;
- #pwm-cells = <3>;
- status = "disabled";
- };
-
- i2c3: i2c at 1c000 {
- compatible = "amlogic,meson-axg-i2c";
- status = "disabled";
- reg = <0x0 0x1c000 0x0 0x20>;
- interrupts = <GIC_SPI 39 IRQ_TYPE_EDGE_RISING>;
- #address-cells = <1>;
- #size-cells = <0>;
- clocks = <&clkc CLKID_I2C>;
- };
-
- i2c2: i2c at 1d000 {
- compatible = "amlogic,meson-axg-i2c";
- status = "disabled";
- reg = <0x0 0x1d000 0x0 0x20>;
- interrupts = <GIC_SPI 215 IRQ_TYPE_EDGE_RISING>;
- #address-cells = <1>;
- #size-cells = <0>;
- clocks = <&clkc CLKID_I2C>;
- };
-
- i2c1: i2c at 1e000 {
- compatible = "amlogic,meson-axg-i2c";
- status = "disabled";
- reg = <0x0 0x1e000 0x0 0x20>;
- interrupts = <GIC_SPI 214 IRQ_TYPE_EDGE_RISING>;
- #address-cells = <1>;
- #size-cells = <0>;
- clocks = <&clkc CLKID_I2C>;
- };
-
- i2c0: i2c at 1f000 {
- compatible = "amlogic,meson-axg-i2c";
- status = "disabled";
- reg = <0x0 0x1f000 0x0 0x20>;
- interrupts = <GIC_SPI 21 IRQ_TYPE_EDGE_RISING>;
- #address-cells = <1>;
- #size-cells = <0>;
- clocks = <&clkc CLKID_I2C>;
- };
-
- clk_msr: clock-measure at 18000 {
- compatible = "amlogic,meson-g12a-clk-measure";
- reg = <0x0 0x18000 0x0 0x10>;
- };
-
- uart_C: serial at 22000 {
- compatible = "amlogic,meson-gx-uart";
- reg = <0x0 0x22000 0x0 0x18>;
- interrupts = <GIC_SPI 93 IRQ_TYPE_EDGE_RISING>;
- clocks = <&xtal>, <&clkc CLKID_UART2>, <&xtal>;
- clock-names = "xtal", "pclk", "baud";
- status = "disabled";
- };
-
- uart_B: serial at 23000 {
- compatible = "amlogic,meson-gx-uart";
- reg = <0x0 0x23000 0x0 0x18>;
- interrupts = <GIC_SPI 75 IRQ_TYPE_EDGE_RISING>;
- clocks = <&xtal>, <&clkc CLKID_UART1>, <&xtal>;
- clock-names = "xtal", "pclk", "baud";
- status = "disabled";
- };
-
- uart_A: serial at 24000 {
- compatible = "amlogic,meson-gx-uart";
- reg = <0x0 0x24000 0x0 0x18>;
- interrupts = <GIC_SPI 26 IRQ_TYPE_EDGE_RISING>;
- clocks = <&xtal>, <&clkc CLKID_UART0>, <&xtal>;
- clock-names = "xtal", "pclk", "baud";
- status = "disabled";
- fifo-size = <128>;
- };
- };
-
- sd_emmc_a: sd at ffe03000 {
- compatible = "amlogic,meson-axg-mmc";
- reg = <0x0 0xffe03000 0x0 0x800>;
- interrupts = <GIC_SPI 189 IRQ_TYPE_EDGE_RISING>;
- status = "disabled";
- clocks = <&clkc CLKID_SD_EMMC_A>,
- <&clkc CLKID_SD_EMMC_A_CLK0>,
- <&clkc CLKID_FCLK_DIV2>;
- clock-names = "core", "clkin0", "clkin1";
- resets = <&reset RESET_SD_EMMC_A>;
- };
-
- sd_emmc_b: sd at ffe05000 {
- compatible = "amlogic,meson-axg-mmc";
- reg = <0x0 0xffe05000 0x0 0x800>;
- interrupts = <GIC_SPI 190 IRQ_TYPE_EDGE_RISING>;
- status = "disabled";
- clocks = <&clkc CLKID_SD_EMMC_B>,
- <&clkc CLKID_SD_EMMC_B_CLK0>,
- <&clkc CLKID_FCLK_DIV2>;
- clock-names = "core", "clkin0", "clkin1";
- resets = <&reset RESET_SD_EMMC_B>;
- };
-
- sd_emmc_c: mmc at ffe07000 {
- compatible = "amlogic,meson-axg-mmc";
- reg = <0x0 0xffe07000 0x0 0x800>;
- interrupts = <GIC_SPI 191 IRQ_TYPE_EDGE_RISING>;
- status = "disabled";
- clocks = <&clkc CLKID_SD_EMMC_C>,
- <&clkc CLKID_SD_EMMC_C_CLK0>,
- <&clkc CLKID_FCLK_DIV2>;
- clock-names = "core", "clkin0", "clkin1";
- resets = <&reset RESET_SD_EMMC_C>;
- };
-
- usb: usb at ffe09000 {
- status = "disabled";
- compatible = "amlogic,meson-g12a-usb-ctrl";
- reg = <0x0 0xffe09000 0x0 0xa0>;
- interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
- #address-cells = <2>;
- #size-cells = <2>;
- ranges;
-
- clocks = <&clkc CLKID_USB>;
- resets = <&reset RESET_USB>;
-
- dr_mode = "otg";
-
- phys = <&usb2_phy0>, <&usb2_phy1>,
- <&usb3_pcie_phy PHY_TYPE_USB3>;
- phy-names = "usb2-phy0", "usb2-phy1", "usb3-phy0";
-
- dwc2: usb at ff400000 {
- compatible = "amlogic,meson-g12a-usb", "snps,dwc2";
- reg = <0x0 0xff400000 0x0 0x40000>;
- interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clkc CLKID_USB1_DDR_BRIDGE>;
- clock-names = "otg";
- phys = <&usb2_phy1>;
- phy-names = "usb2-phy";
- dr_mode = "peripheral";
- g-rx-fifo-size = <192>;
- g-np-tx-fifo-size = <128>;
- g-tx-fifo-size = <128 128 16 16 16>;
- };
-
- dwc3: usb at ff500000 {
- compatible = "snps,dwc3";
- reg = <0x0 0xff500000 0x0 0x100000>;
- interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
- dr_mode = "host";
- snps,dis_u2_susphy_quirk;
- snps,quirk-frame-length-adjustment = <0x20>;
- snps,parkmode-disable-ss-quirk;
- };
- };
-
- mali: gpu at ffe40000 {
- compatible = "amlogic,meson-g12a-mali", "arm,mali-bifrost";
- reg = <0x0 0xffe40000 0x0 0x40000>;
- interrupt-parent = <&gic>;
- interrupts = <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "job", "mmu", "gpu";
- clocks = <&clkc CLKID_MALI>;
- resets = <&reset RESET_DVALIN_CAPB3>, <&reset RESET_DVALIN>;
- operating-points-v2 = <&gpu_opp_table>;
- #cooling-cells = <2>;
- };
- };
-
- thermal-zones {
- cpu_thermal: cpu-thermal {
- polling-delay = <1000>;
- polling-delay-passive = <100>;
- thermal-sensors = <&cpu_temp>;
-
- trips {
- cpu_passive: cpu-passive {
- temperature = <85000>; /* millicelsius */
- hysteresis = <2000>; /* millicelsius */
- type = "passive";
- };
-
- cpu_hot: cpu-hot {
- temperature = <95000>; /* millicelsius */
- hysteresis = <2000>; /* millicelsius */
- type = "hot";
- };
-
- cpu_critical: cpu-critical {
- temperature = <110000>; /* millicelsius */
- hysteresis = <2000>; /* millicelsius */
- type = "critical";
- };
- };
- };
-
- ddr_thermal: ddr-thermal {
- polling-delay = <1000>;
- polling-delay-passive = <100>;
- thermal-sensors = <&ddr_temp>;
-
- trips {
- ddr_passive: ddr-passive {
- temperature = <85000>; /* millicelsius */
- hysteresis = <2000>; /* millicelsius */
- type = "passive";
- };
-
- ddr_critical: ddr-critical {
- temperature = <110000>; /* millicelsius */
- hysteresis = <2000>; /* millicelsius */
- type = "critical";
- };
- };
-
- cooling-maps {
- map {
- trip = <&ddr_passive>;
- cooling-device = <&mali THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
- };
- };
- };
- };
-
- timer {
- compatible = "arm,armv8-timer";
- interrupts = <GIC_PPI 13
- (GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>,
- <GIC_PPI 14
- (GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>,
- <GIC_PPI 11
- (GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>,
- <GIC_PPI 10
- (GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>;
- arm,no-tick-in-suspend;
- };
-
- xtal: xtal-clk {
- compatible = "fixed-clock";
- clock-frequency = <24000000>;
- clock-output-names = "xtal";
- #clock-cells = <0>;
- };
-
-};
diff --git a/arch/arm/dts/meson-g12.dtsi b/arch/arm/dts/meson-g12.dtsi
deleted file mode 100644
index 6a1f4dcf64..0000000000
--- a/arch/arm/dts/meson-g12.dtsi
+++ /dev/null
@@ -1,385 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Copyright (c) 2019 BayLibre, SAS
- * Author: Jerome Brunet <jbrunet at baylibre.com>
- */
-
-#include "meson-g12-common.dtsi"
-#include <dt-bindings/clock/axg-audio-clkc.h>
-#include <dt-bindings/power/meson-g12a-power.h>
-#include <dt-bindings/reset/amlogic,meson-axg-audio-arb.h>
-#include <dt-bindings/reset/amlogic,meson-g12a-audio-reset.h>
-
-/ {
- tdmif_a: audio-controller-0 {
- compatible = "amlogic,axg-tdm-iface";
- #sound-dai-cells = <0>;
- sound-name-prefix = "TDM_A";
- clocks = <&clkc_audio AUD_CLKID_MST_A_MCLK>,
- <&clkc_audio AUD_CLKID_MST_A_SCLK>,
- <&clkc_audio AUD_CLKID_MST_A_LRCLK>;
- clock-names = "mclk", "sclk", "lrclk";
- status = "disabled";
- };
-
- tdmif_b: audio-controller-1 {
- compatible = "amlogic,axg-tdm-iface";
- #sound-dai-cells = <0>;
- sound-name-prefix = "TDM_B";
- clocks = <&clkc_audio AUD_CLKID_MST_B_MCLK>,
- <&clkc_audio AUD_CLKID_MST_B_SCLK>,
- <&clkc_audio AUD_CLKID_MST_B_LRCLK>;
- clock-names = "mclk", "sclk", "lrclk";
- status = "disabled";
- };
-
- tdmif_c: audio-controller-2 {
- compatible = "amlogic,axg-tdm-iface";
- #sound-dai-cells = <0>;
- sound-name-prefix = "TDM_C";
- clocks = <&clkc_audio AUD_CLKID_MST_C_MCLK>,
- <&clkc_audio AUD_CLKID_MST_C_SCLK>,
- <&clkc_audio AUD_CLKID_MST_C_LRCLK>;
- clock-names = "mclk", "sclk", "lrclk";
- status = "disabled";
- };
-};
-
-&apb {
- pdm: audio-controller at 40000 {
- compatible = "amlogic,g12a-pdm",
- "amlogic,axg-pdm";
- reg = <0x0 0x40000 0x0 0x34>;
- #sound-dai-cells = <0>;
- sound-name-prefix = "PDM";
- clocks = <&clkc_audio AUD_CLKID_PDM>,
- <&clkc_audio AUD_CLKID_PDM_DCLK>,
- <&clkc_audio AUD_CLKID_PDM_SYSCLK>;
- clock-names = "pclk", "dclk", "sysclk";
- resets = <&clkc_audio AUD_RESET_PDM>;
- status = "disabled";
- };
-
- audio: bus at 42000 {
- compatible = "simple-bus";
- reg = <0x0 0x42000 0x0 0x2000>;
- #address-cells = <2>;
- #size-cells = <2>;
- ranges = <0x0 0x0 0x0 0x42000 0x0 0x2000>;
-
- clkc_audio: clock-controller at 0 {
- status = "disabled";
- compatible = "amlogic,g12a-audio-clkc";
- reg = <0x0 0x0 0x0 0xb4>;
- #clock-cells = <1>;
- #reset-cells = <1>;
-
- clocks = <&clkc CLKID_AUDIO>,
- <&clkc CLKID_MPLL0>,
- <&clkc CLKID_MPLL1>,
- <&clkc CLKID_MPLL2>,
- <&clkc CLKID_MPLL3>,
- <&clkc CLKID_HIFI_PLL>,
- <&clkc CLKID_FCLK_DIV3>,
- <&clkc CLKID_FCLK_DIV4>,
- <&clkc CLKID_GP0_PLL>;
- clock-names = "pclk",
- "mst_in0",
- "mst_in1",
- "mst_in2",
- "mst_in3",
- "mst_in4",
- "mst_in5",
- "mst_in6",
- "mst_in7";
-
- resets = <&reset RESET_AUDIO>;
- };
-
- toddr_a: audio-controller at 100 {
- compatible = "amlogic,g12a-toddr",
- "amlogic,axg-toddr";
- reg = <0x0 0x100 0x0 0x2c>;
- #sound-dai-cells = <0>;
- sound-name-prefix = "TODDR_A";
- interrupts = <GIC_SPI 148 IRQ_TYPE_EDGE_RISING>;
- clocks = <&clkc_audio AUD_CLKID_TODDR_A>;
- resets = <&arb AXG_ARB_TODDR_A>,
- <&clkc_audio AUD_RESET_TODDR_A>;
- reset-names = "arb", "rst";
- amlogic,fifo-depth = <512>;
- status = "disabled";
- };
-
- toddr_b: audio-controller at 140 {
- compatible = "amlogic,g12a-toddr",
- "amlogic,axg-toddr";
- reg = <0x0 0x140 0x0 0x2c>;
- #sound-dai-cells = <0>;
- sound-name-prefix = "TODDR_B";
- interrupts = <GIC_SPI 149 IRQ_TYPE_EDGE_RISING>;
- clocks = <&clkc_audio AUD_CLKID_TODDR_B>;
- resets = <&arb AXG_ARB_TODDR_B>,
- <&clkc_audio AUD_RESET_TODDR_B>;
- reset-names = "arb", "rst";
- amlogic,fifo-depth = <256>;
- status = "disabled";
- };
-
- toddr_c: audio-controller at 180 {
- compatible = "amlogic,g12a-toddr",
- "amlogic,axg-toddr";
- reg = <0x0 0x180 0x0 0x2c>;
- #sound-dai-cells = <0>;
- sound-name-prefix = "TODDR_C";
- interrupts = <GIC_SPI 150 IRQ_TYPE_EDGE_RISING>;
- clocks = <&clkc_audio AUD_CLKID_TODDR_C>;
- resets = <&arb AXG_ARB_TODDR_C>,
- <&clkc_audio AUD_RESET_TODDR_C>;
- reset-names = "arb", "rst";
- amlogic,fifo-depth = <256>;
- status = "disabled";
- };
-
- frddr_a: audio-controller at 1c0 {
- compatible = "amlogic,g12a-frddr",
- "amlogic,axg-frddr";
- reg = <0x0 0x1c0 0x0 0x2c>;
- #sound-dai-cells = <0>;
- sound-name-prefix = "FRDDR_A";
- interrupts = <GIC_SPI 152 IRQ_TYPE_EDGE_RISING>;
- clocks = <&clkc_audio AUD_CLKID_FRDDR_A>;
- resets = <&arb AXG_ARB_FRDDR_A>,
- <&clkc_audio AUD_RESET_FRDDR_A>;
- reset-names = "arb", "rst";
- amlogic,fifo-depth = <512>;
- status = "disabled";
- };
-
- frddr_b: audio-controller at 200 {
- compatible = "amlogic,g12a-frddr",
- "amlogic,axg-frddr";
- reg = <0x0 0x200 0x0 0x2c>;
- #sound-dai-cells = <0>;
- sound-name-prefix = "FRDDR_B";
- interrupts = <GIC_SPI 153 IRQ_TYPE_EDGE_RISING>;
- clocks = <&clkc_audio AUD_CLKID_FRDDR_B>;
- resets = <&arb AXG_ARB_FRDDR_B>,
- <&clkc_audio AUD_RESET_FRDDR_B>;
- reset-names = "arb", "rst";
- amlogic,fifo-depth = <256>;
- status = "disabled";
- };
-
- frddr_c: audio-controller at 240 {
- compatible = "amlogic,g12a-frddr",
- "amlogic,axg-frddr";
- reg = <0x0 0x240 0x0 0x2c>;
- #sound-dai-cells = <0>;
- sound-name-prefix = "FRDDR_C";
- interrupts = <GIC_SPI 154 IRQ_TYPE_EDGE_RISING>;
- clocks = <&clkc_audio AUD_CLKID_FRDDR_C>;
- resets = <&arb AXG_ARB_FRDDR_C>,
- <&clkc_audio AUD_RESET_FRDDR_C>;
- reset-names = "arb", "rst";
- amlogic,fifo-depth = <256>;
- status = "disabled";
- };
-
- arb: reset-controller at 280 {
- status = "disabled";
- compatible = "amlogic,meson-axg-audio-arb";
- reg = <0x0 0x280 0x0 0x4>;
- #reset-cells = <1>;
- clocks = <&clkc_audio AUD_CLKID_DDR_ARB>;
- };
-
- tdmin_a: audio-controller at 300 {
- compatible = "amlogic,g12a-tdmin",
- "amlogic,axg-tdmin";
- reg = <0x0 0x300 0x0 0x40>;
- sound-name-prefix = "TDMIN_A";
- resets = <&clkc_audio AUD_RESET_TDMIN_A>;
- clocks = <&clkc_audio AUD_CLKID_TDMIN_A>,
- <&clkc_audio AUD_CLKID_TDMIN_A_SCLK>,
- <&clkc_audio AUD_CLKID_TDMIN_A_SCLK_SEL>,
- <&clkc_audio AUD_CLKID_TDMIN_A_LRCLK>,
- <&clkc_audio AUD_CLKID_TDMIN_A_LRCLK>;
- clock-names = "pclk", "sclk", "sclk_sel",
- "lrclk", "lrclk_sel";
- status = "disabled";
- };
-
- tdmin_b: audio-controller at 340 {
- compatible = "amlogic,g12a-tdmin",
- "amlogic,axg-tdmin";
- reg = <0x0 0x340 0x0 0x40>;
- sound-name-prefix = "TDMIN_B";
- resets = <&clkc_audio AUD_RESET_TDMIN_B>;
- clocks = <&clkc_audio AUD_CLKID_TDMIN_B>,
- <&clkc_audio AUD_CLKID_TDMIN_B_SCLK>,
- <&clkc_audio AUD_CLKID_TDMIN_B_SCLK_SEL>,
- <&clkc_audio AUD_CLKID_TDMIN_B_LRCLK>,
- <&clkc_audio AUD_CLKID_TDMIN_B_LRCLK>;
- clock-names = "pclk", "sclk", "sclk_sel",
- "lrclk", "lrclk_sel";
- status = "disabled";
- };
-
- tdmin_c: audio-controller at 380 {
- compatible = "amlogic,g12a-tdmin",
- "amlogic,axg-tdmin";
- reg = <0x0 0x380 0x0 0x40>;
- sound-name-prefix = "TDMIN_C";
- resets = <&clkc_audio AUD_RESET_TDMIN_C>;
- clocks = <&clkc_audio AUD_CLKID_TDMIN_C>,
- <&clkc_audio AUD_CLKID_TDMIN_C_SCLK>,
- <&clkc_audio AUD_CLKID_TDMIN_C_SCLK_SEL>,
- <&clkc_audio AUD_CLKID_TDMIN_C_LRCLK>,
- <&clkc_audio AUD_CLKID_TDMIN_C_LRCLK>;
- clock-names = "pclk", "sclk", "sclk_sel",
- "lrclk", "lrclk_sel";
- status = "disabled";
- };
-
- tdmin_lb: audio-controller at 3c0 {
- compatible = "amlogic,g12a-tdmin",
- "amlogic,axg-tdmin";
- reg = <0x0 0x3c0 0x0 0x40>;
- sound-name-prefix = "TDMIN_LB";
- resets = <&clkc_audio AUD_RESET_TDMIN_LB>;
- clocks = <&clkc_audio AUD_CLKID_TDMIN_LB>,
- <&clkc_audio AUD_CLKID_TDMIN_LB_SCLK>,
- <&clkc_audio AUD_CLKID_TDMIN_LB_SCLK_SEL>,
- <&clkc_audio AUD_CLKID_TDMIN_LB_LRCLK>,
- <&clkc_audio AUD_CLKID_TDMIN_LB_LRCLK>;
- clock-names = "pclk", "sclk", "sclk_sel",
- "lrclk", "lrclk_sel";
- status = "disabled";
- };
-
- spdifin: audio-controller at 400 {
- compatible = "amlogic,g12a-spdifin",
- "amlogic,axg-spdifin";
- reg = <0x0 0x400 0x0 0x30>;
- #sound-dai-cells = <0>;
- sound-name-prefix = "SPDIFIN";
- interrupts = <GIC_SPI 151 IRQ_TYPE_EDGE_RISING>;
- clocks = <&clkc_audio AUD_CLKID_SPDIFIN>,
- <&clkc_audio AUD_CLKID_SPDIFIN_CLK>;
- clock-names = "pclk", "refclk";
- resets = <&clkc_audio AUD_RESET_SPDIFIN>;
- status = "disabled";
- };
-
- spdifout: audio-controller at 480 {
- compatible = "amlogic,g12a-spdifout",
- "amlogic,axg-spdifout";
- reg = <0x0 0x480 0x0 0x50>;
- #sound-dai-cells = <0>;
- sound-name-prefix = "SPDIFOUT";
- clocks = <&clkc_audio AUD_CLKID_SPDIFOUT>,
- <&clkc_audio AUD_CLKID_SPDIFOUT_CLK>;
- clock-names = "pclk", "mclk";
- resets = <&clkc_audio AUD_RESET_SPDIFOUT>;
- status = "disabled";
- };
-
- tdmout_a: audio-controller at 500 {
- compatible = "amlogic,g12a-tdmout";
- reg = <0x0 0x500 0x0 0x40>;
- sound-name-prefix = "TDMOUT_A";
- resets = <&clkc_audio AUD_RESET_TDMOUT_A>;
- clocks = <&clkc_audio AUD_CLKID_TDMOUT_A>,
- <&clkc_audio AUD_CLKID_TDMOUT_A_SCLK>,
- <&clkc_audio AUD_CLKID_TDMOUT_A_SCLK_SEL>,
- <&clkc_audio AUD_CLKID_TDMOUT_A_LRCLK>,
- <&clkc_audio AUD_CLKID_TDMOUT_A_LRCLK>;
- clock-names = "pclk", "sclk", "sclk_sel",
- "lrclk", "lrclk_sel";
- status = "disabled";
- };
-
- tdmout_b: audio-controller at 540 {
- compatible = "amlogic,g12a-tdmout";
- reg = <0x0 0x540 0x0 0x40>;
- sound-name-prefix = "TDMOUT_B";
- resets = <&clkc_audio AUD_RESET_TDMOUT_B>;
- clocks = <&clkc_audio AUD_CLKID_TDMOUT_B>,
- <&clkc_audio AUD_CLKID_TDMOUT_B_SCLK>,
- <&clkc_audio AUD_CLKID_TDMOUT_B_SCLK_SEL>,
- <&clkc_audio AUD_CLKID_TDMOUT_B_LRCLK>,
- <&clkc_audio AUD_CLKID_TDMOUT_B_LRCLK>;
- clock-names = "pclk", "sclk", "sclk_sel",
- "lrclk", "lrclk_sel";
- status = "disabled";
- };
-
- tdmout_c: audio-controller at 580 {
- compatible = "amlogic,g12a-tdmout";
- reg = <0x0 0x580 0x0 0x40>;
- sound-name-prefix = "TDMOUT_C";
- resets = <&clkc_audio AUD_RESET_TDMOUT_C>;
- clocks = <&clkc_audio AUD_CLKID_TDMOUT_C>,
- <&clkc_audio AUD_CLKID_TDMOUT_C_SCLK>,
- <&clkc_audio AUD_CLKID_TDMOUT_C_SCLK_SEL>,
- <&clkc_audio AUD_CLKID_TDMOUT_C_LRCLK>,
- <&clkc_audio AUD_CLKID_TDMOUT_C_LRCLK>;
- clock-names = "pclk", "sclk", "sclk_sel",
- "lrclk", "lrclk_sel";
- status = "disabled";
- };
-
- spdifout_b: audio-controller at 680 {
- compatible = "amlogic,g12a-spdifout",
- "amlogic,axg-spdifout";
- reg = <0x0 0x680 0x0 0x50>;
- #sound-dai-cells = <0>;
- sound-name-prefix = "SPDIFOUT_B";
- clocks = <&clkc_audio AUD_CLKID_SPDIFOUT_B>,
- <&clkc_audio AUD_CLKID_SPDIFOUT_B_CLK>;
- clock-names = "pclk", "mclk";
- resets = <&clkc_audio AUD_RESET_SPDIFOUT_B>;
- status = "disabled";
- };
-
- toacodec: audio-controller at 740 {
- compatible = "amlogic,g12a-toacodec";
- reg = <0x0 0x740 0x0 0x4>;
- #sound-dai-cells = <1>;
- sound-name-prefix = "TOACODEC";
- resets = <&clkc_audio AUD_RESET_TOACODEC>;
- status = "disabled";
- };
-
- tohdmitx: audio-controller at 744 {
- compatible = "amlogic,g12a-tohdmitx";
- reg = <0x0 0x744 0x0 0x4>;
- #sound-dai-cells = <1>;
- sound-name-prefix = "TOHDMITX";
- resets = <&clkc_audio AUD_RESET_TOHDMITX>;
- status = "disabled";
- };
- };
-};
-
-ðmac {
- power-domains = <&pwrc PWRC_G12A_ETH_ID>;
-};
-
-&vpu {
- power-domains = <&pwrc PWRC_G12A_VPU_ID>;
-};
-
-&sd_emmc_a {
- amlogic,dram-access-quirk;
-};
-
-&simplefb_cvbs {
- power-domains = <&pwrc PWRC_G12A_VPU_ID>;
-};
-
-&simplefb_hdmi {
- power-domains = <&pwrc PWRC_G12A_VPU_ID>;
-};
-
diff --git a/arch/arm/dts/meson-g12a-radxa-zero.dts b/arch/arm/dts/meson-g12a-radxa-zero.dts
deleted file mode 100644
index e3bb6df42f..0000000000
--- a/arch/arm/dts/meson-g12a-radxa-zero.dts
+++ /dev/null
@@ -1,405 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Copyright (c) 2018 BayLibre SAS. All rights reserved.
- */
-
-/dts-v1/;
-
-#include "meson-g12a.dtsi"
-#include <dt-bindings/gpio/meson-g12a-gpio.h>
-#include <dt-bindings/sound/meson-g12a-tohdmitx.h>
-
-/ {
- compatible = "radxa,zero", "amlogic,g12a";
- model = "Radxa Zero";
-
- aliases {
- serial0 = &uart_AO;
- };
-
- chosen {
- stdout-path = "serial0:115200n8";
- };
-
- memory at 0 {
- device_type = "memory";
- reg = <0x0 0x0 0x0 0x40000000>;
- };
-
- cvbs-connector {
- status = "disabled";
- compatible = "composite-video-connector";
-
- port {
- cvbs_connector_in: endpoint {
- remote-endpoint = <&cvbs_vdac_out>;
- };
- };
- };
-
- hdmi-connector {
- compatible = "hdmi-connector";
- type = "a";
-
- port {
- hdmi_connector_in: endpoint {
- remote-endpoint = <&hdmi_tx_tmds_out>;
- };
- };
- };
-
- emmc_pwrseq: emmc-pwrseq {
- compatible = "mmc-pwrseq-emmc";
- reset-gpios = <&gpio BOOT_12 GPIO_ACTIVE_LOW>;
- };
-
- sdio_pwrseq: sdio-pwrseq {
- compatible = "mmc-pwrseq-simple";
- reset-gpios = <&gpio GPIOX_6 GPIO_ACTIVE_LOW>;
- clocks = <&wifi32k>;
- clock-names = "ext_clock";
- };
-
- ao_5v: regulator-ao_5v {
- compatible = "regulator-fixed";
- regulator-name = "AO_5V";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- regulator-always-on;
- };
-
- vcc_1v8: regulator-vcc_1v8 {
- compatible = "regulator-fixed";
- regulator-name = "VCC_1V8";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- vin-supply = <&vcc_3v3>;
- regulator-always-on;
- };
-
- vcc_3v3: regulator-vcc_3v3 {
- compatible = "regulator-fixed";
- regulator-name = "VCC_3V3";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- vin-supply = <&vddao_3v3>;
- regulator-always-on;
- };
-
- hdmi_pw: regulator-hdmi_pw {
- compatible = "regulator-fixed";
- regulator-name = "HDMI_PW";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- vin-supply = <&ao_5v>;
- regulator-always-on;
- };
-
- vddao_1v8: regulator-vddao_1v8 {
- compatible = "regulator-fixed";
- regulator-name = "VDDAO_1V8";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- vin-supply = <&vddao_3v3>;
- regulator-always-on;
- };
-
- vddao_3v3: regulator-vddao_3v3 {
- compatible = "regulator-fixed";
- regulator-name = "VDDAO_3V3";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- vin-supply = <&ao_5v>;
- regulator-always-on;
- };
-
- vddcpu: regulator-vddcpu {
- compatible = "pwm-regulator";
-
- regulator-name = "VDDCPU";
- regulator-min-microvolt = <721000>;
- regulator-max-microvolt = <1022000>;
-
- vin-supply = <&ao_5v>;
-
- pwms = <&pwm_AO_cd 1 1250 0>;
- pwm-dutycycle-range = <100 0>;
-
- regulator-boot-on;
- regulator-always-on;
- };
-
- sound {
- compatible = "amlogic,axg-sound-card";
- model = "RADXA-ZERO";
- audio-aux-devs = <&tdmout_b>;
- audio-routing = "TDMOUT_B IN 0", "FRDDR_A OUT 1",
- "TDMOUT_B IN 1", "FRDDR_B OUT 1",
- "TDMOUT_B IN 2", "FRDDR_C OUT 1",
- "TDM_B Playback", "TDMOUT_B OUT";
-
- assigned-clocks = <&clkc CLKID_MPLL2>,
- <&clkc CLKID_MPLL0>,
- <&clkc CLKID_MPLL1>;
- assigned-clock-parents = <0>, <0>, <0>;
- assigned-clock-rates = <294912000>,
- <270950400>,
- <393216000>;
- status = "okay";
-
- dai-link-0 {
- sound-dai = <&frddr_a>;
- };
-
- dai-link-1 {
- sound-dai = <&frddr_b>;
- };
-
- dai-link-2 {
- sound-dai = <&frddr_c>;
- };
-
- /* 8ch hdmi interface */
- dai-link-3 {
- sound-dai = <&tdmif_b>;
- dai-format = "i2s";
- dai-tdm-slot-tx-mask-0 = <1 1>;
- dai-tdm-slot-tx-mask-1 = <1 1>;
- dai-tdm-slot-tx-mask-2 = <1 1>;
- dai-tdm-slot-tx-mask-3 = <1 1>;
- mclk-fs = <256>;
-
- codec {
- sound-dai = <&tohdmitx TOHDMITX_I2S_IN_B>;
- };
- };
-
- dai-link-4 {
- sound-dai = <&tohdmitx TOHDMITX_I2S_OUT>;
-
- codec {
- sound-dai = <&hdmi_tx>;
- };
- };
- };
-
- wifi32k: wifi32k {
- compatible = "pwm-clock";
- #clock-cells = <0>;
- clock-frequency = <32768>;
- pwms = <&pwm_ef 0 30518 0>; /* PWM_E at 32.768KHz */
- };
-};
-
-&arb {
- status = "okay";
-};
-
-&cec_AO {
- pinctrl-0 = <&cec_ao_a_h_pins>;
- pinctrl-names = "default";
- status = "disabled";
- hdmi-phandle = <&hdmi_tx>;
-};
-
-&cecb_AO {
- pinctrl-0 = <&cec_ao_b_h_pins>;
- pinctrl-names = "default";
- status = "okay";
- hdmi-phandle = <&hdmi_tx>;
-};
-
-&clkc_audio {
- status = "okay";
-};
-
-&cpu0 {
- cpu-supply = <&vddcpu>;
- operating-points-v2 = <&cpu_opp_table>;
- clocks = <&clkc CLKID_CPU_CLK>;
- clock-latency = <50000>;
-};
-
-&cpu1 {
- cpu-supply = <&vddcpu>;
- operating-points-v2 = <&cpu_opp_table>;
- clocks = <&clkc CLKID_CPU_CLK>;
- clock-latency = <50000>;
-};
-
-&cpu2 {
- cpu-supply = <&vddcpu>;
- operating-points-v2 = <&cpu_opp_table>;
- clocks = <&clkc CLKID_CPU_CLK>;
- clock-latency = <50000>;
-};
-
-&cpu3 {
- cpu-supply = <&vddcpu>;
- operating-points-v2 = <&cpu_opp_table>;
- clocks = <&clkc CLKID_CPU_CLK>;
- clock-latency = <50000>;
-};
-
-&cvbs_vdac_port {
- cvbs_vdac_out: endpoint {
- remote-endpoint = <&cvbs_connector_in>;
- };
-};
-
-&frddr_a {
- status = "okay";
-};
-
-&frddr_b {
- status = "okay";
-};
-
-&frddr_c {
- status = "okay";
-};
-
-&hdmi_tx {
- status = "okay";
- pinctrl-0 = <&hdmitx_hpd_pins>, <&hdmitx_ddc_pins>;
- pinctrl-names = "default";
- hdmi-supply = <&hdmi_pw>;
-};
-
-&hdmi_tx_tmds_port {
- hdmi_tx_tmds_out: endpoint {
- remote-endpoint = <&hdmi_connector_in>;
- };
-};
-
-&ir {
- status = "disabled";
- pinctrl-0 = <&remote_input_ao_pins>;
- pinctrl-names = "default";
-};
-
-&pwm_AO_cd {
- pinctrl-0 = <&pwm_ao_d_e_pins>;
- pinctrl-names = "default";
- clocks = <&xtal>;
- clock-names = "clkin1";
- status = "okay";
-};
-
-&pwm_ef {
- status = "okay";
- pinctrl-0 = <&pwm_e_pins>;
- pinctrl-names = "default";
- clocks = <&xtal>;
- clock-names = "clkin0";
-};
-
-&saradc {
- status = "okay";
- vref-supply = <&vddao_1v8>;
-};
-
-/* SDIO */
-&sd_emmc_a {
- status = "okay";
- pinctrl-0 = <&sdio_pins>;
- pinctrl-1 = <&sdio_clk_gate_pins>;
- pinctrl-names = "default", "clk-gate";
- #address-cells = <1>;
- #size-cells = <0>;
-
- bus-width = <4>;
- cap-sd-highspeed;
- sd-uhs-sdr50;
- max-frequency = <100000000>;
-
- non-removable;
- disable-wp;
-
- /* WiFi firmware requires power to be kept while in suspend */
- keep-power-in-suspend;
-
- mmc-pwrseq = <&sdio_pwrseq>;
-
- vmmc-supply = <&vddao_3v3>;
- vqmmc-supply = <&vddao_1v8>;
-
- brcmf: wifi at 1 {
- reg = <1>;
- compatible = "brcm,bcm4329-fmac";
- };
-};
-
-/* SD card */
-&sd_emmc_b {
- status = "okay";
- pinctrl-0 = <&sdcard_c_pins>;
- pinctrl-1 = <&sdcard_clk_gate_c_pins>;
- pinctrl-names = "default", "clk-gate";
-
- bus-width = <4>;
- cap-sd-highspeed;
- max-frequency = <100000000>;
- disable-wp;
-
- cd-gpios = <&gpio GPIOC_6 GPIO_ACTIVE_LOW>;
- vmmc-supply = <&vddao_3v3>;
- vqmmc-supply = <&vddao_3v3>;
-};
-
-/* eMMC */
-&sd_emmc_c {
- status = "okay";
- pinctrl-0 = <&emmc_ctrl_pins>, <&emmc_data_8b_pins>, <&emmc_ds_pins>;
- pinctrl-1 = <&emmc_clk_gate_pins>;
- pinctrl-names = "default", "clk-gate";
-
- bus-width = <8>;
- cap-mmc-highspeed;
- mmc-ddr-1_8v;
- mmc-hs200-1_8v;
- max-frequency = <200000000>;
- disable-wp;
-
- mmc-pwrseq = <&emmc_pwrseq>;
- vmmc-supply = <&vcc_3v3>;
- vqmmc-supply = <&vcc_1v8>;
-};
-
-&tdmif_b {
- status = "okay";
-};
-
-&tdmout_b {
- status = "okay";
-};
-
-&tohdmitx {
- status = "okay";
-};
-
-&uart_A {
- status = "okay";
- pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>;
- pinctrl-names = "default";
- uart-has-rtscts;
-
- bluetooth {
- compatible = "brcm,bcm43438-bt";
- shutdown-gpios = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>;
- max-speed = <2000000>;
- clocks = <&wifi32k>;
- clock-names = "lpo";
- };
-};
-
-&uart_AO {
- status = "okay";
- pinctrl-0 = <&uart_ao_a_pins>;
- pinctrl-names = "default";
-};
-
-&usb {
- status = "okay";
- dr_mode = "host";
-};
diff --git a/arch/arm/dts/meson-g12a-sei510.dts b/arch/arm/dts/meson-g12a-sei510.dts
deleted file mode 100644
index 81269ccc24..0000000000
--- a/arch/arm/dts/meson-g12a-sei510.dts
+++ /dev/null
@@ -1,566 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Copyright (c) 2019 BayLibre SAS. All rights reserved.
- */
-
-/dts-v1/;
-
-#include "meson-g12a.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/gpio/meson-g12a-gpio.h>
-#include <dt-bindings/sound/meson-g12a-tohdmitx.h>
-
-/ {
- compatible = "seirobotics,sei510", "amlogic,g12a";
- model = "SEI Robotics SEI510";
-
- adc_keys {
- compatible = "adc-keys";
- io-channels = <&saradc 0>;
- io-channel-names = "buttons";
- keyup-threshold-microvolt = <1800000>;
-
- button-onoff {
- label = "On/Off";
- linux,code = <KEY_POWER>;
- press-threshold-microvolt = <1700000>;
- };
- };
-
- aliases {
- serial0 = &uart_AO;
- ethernet0 = ðmac;
- };
-
- mono_dac: audio-codec-0 {
- compatible = "maxim,max98357a";
- #sound-dai-cells = <0>;
- sound-name-prefix = "U16";
- sdmode-gpios = <&gpio GPIOX_8 GPIO_ACTIVE_HIGH>;
- };
-
- dmics: audio-codec-1 {
- #sound-dai-cells = <0>;
- compatible = "dmic-codec";
- num-channels = <2>;
- wakeup-delay-ms = <50>;
- status = "okay";
- sound-name-prefix = "MIC";
- };
-
- chosen {
- stdout-path = "serial0:115200n8";
- };
-
- cvbs-connector {
- compatible = "composite-video-connector";
-
- port {
- cvbs_connector_in: endpoint {
- remote-endpoint = <&cvbs_vdac_out>;
- };
- };
- };
-
- emmc_pwrseq: emmc-pwrseq {
- compatible = "mmc-pwrseq-emmc";
- reset-gpios = <&gpio BOOT_12 GPIO_ACTIVE_LOW>;
- };
-
- hdmi-connector {
- compatible = "hdmi-connector";
- type = "a";
-
- port {
- hdmi_connector_in: endpoint {
- remote-endpoint = <&hdmi_tx_tmds_out>;
- };
- };
- };
-
- memory at 0 {
- device_type = "memory";
- reg = <0x0 0x0 0x0 0x40000000>;
- };
-
- ao_5v: regulator-ao_5v {
- compatible = "regulator-fixed";
- regulator-name = "AO_5V";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- vin-supply = <&dc_in>;
- regulator-always-on;
- };
-
- dc_in: regulator-dc_in {
- compatible = "regulator-fixed";
- regulator-name = "DC_IN";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- regulator-always-on;
- };
-
- emmc_1v8: regulator-emmc_1v8 {
- compatible = "regulator-fixed";
- regulator-name = "EMMC_1V8";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- vin-supply = <&vddao_3v3>;
- regulator-always-on;
- };
-
- vddao_3v3: regulator-vddao_3v3 {
- compatible = "regulator-fixed";
- regulator-name = "VDDAO_3V3";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- vin-supply = <&dc_in>;
- regulator-always-on;
- };
-
- vddao_3v3_t: regultor-vddao_3v3_t {
- compatible = "regulator-fixed";
- regulator-name = "VDDAO_3V3_T";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- vin-supply = <&vddao_3v3>;
- gpio = <&gpio GPIOH_8 GPIO_OPEN_DRAIN>;
- enable-active-high;
- };
-
- vddcpu: regulator-vddcpu {
- /*
- * SY8120B1ABC DC/DC Regulator.
- */
- compatible = "pwm-regulator";
-
- regulator-name = "VDDCPU";
- regulator-min-microvolt = <721000>;
- regulator-max-microvolt = <1022000>;
-
- vin-supply = <&dc_in>;
-
- pwms = <&pwm_AO_cd 1 1250 0>;
- pwm-dutycycle-range = <100 0>;
-
- regulator-boot-on;
- regulator-always-on;
- };
-
- vddio_ao1v8: regulator-vddio_ao1v8 {
- compatible = "regulator-fixed";
- regulator-name = "VDDIO_AO1V8";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- vin-supply = <&vddao_3v3>;
- regulator-always-on;
- };
-
- reserved-memory {
- /* TEE Reserved Memory */
- bl32_reserved: bl32 at 5000000 {
- reg = <0x0 0x05300000 0x0 0x2000000>;
- no-map;
- };
- };
-
- sdio_pwrseq: sdio-pwrseq {
- compatible = "mmc-pwrseq-simple";
- reset-gpios = <&gpio GPIOX_6 GPIO_ACTIVE_LOW>;
- clocks = <&wifi32k>;
- clock-names = "ext_clock";
- };
-
- wifi32k: wifi32k {
- compatible = "pwm-clock";
- #clock-cells = <0>;
- clock-frequency = <32768>;
- pwms = <&pwm_ef 0 30518 0>; /* PWM_E at 32.768KHz */
- };
-
- sound {
- compatible = "amlogic,axg-sound-card";
- model = "SEI510";
- audio-aux-devs = <&tdmout_a>, <&tdmout_b>,
- <&tdmin_a>, <&tdmin_b>;
- audio-routing = "TDMOUT_A IN 0", "FRDDR_A OUT 0",
- "TDMOUT_A IN 1", "FRDDR_B OUT 0",
- "TDMOUT_A IN 2", "FRDDR_C OUT 0",
- "TDM_A Playback", "TDMOUT_A OUT",
- "TDMOUT_B IN 0", "FRDDR_A OUT 1",
- "TDMOUT_B IN 1", "FRDDR_B OUT 1",
- "TDMOUT_B IN 2", "FRDDR_C OUT 1",
- "TDM_B Playback", "TDMOUT_B OUT",
- "TODDR_A IN 4", "PDM Capture",
- "TODDR_B IN 4", "PDM Capture",
- "TODDR_C IN 4", "PDM Capture",
- "TDMIN_A IN 0", "TDM_A Capture",
- "TDMIN_A IN 3", "TDM_A Loopback",
- "TDMIN_B IN 0", "TDM_A Capture",
- "TDMIN_B IN 3", "TDM_A Loopback",
- "TDMIN_A IN 1", "TDM_B Capture",
- "TDMIN_A IN 4", "TDM_B Loopback",
- "TDMIN_B IN 1", "TDM_B Capture",
- "TDMIN_B IN 4", "TDM_B Loopback",
- "TODDR_A IN 0", "TDMIN_A OUT",
- "TODDR_B IN 0", "TDMIN_A OUT",
- "TODDR_C IN 0", "TDMIN_A OUT",
- "TODDR_A IN 1", "TDMIN_B OUT",
- "TODDR_B IN 1", "TDMIN_B OUT",
- "TODDR_C IN 1", "TDMIN_B OUT";
-
- assigned-clocks = <&clkc CLKID_MPLL2>,
- <&clkc CLKID_MPLL0>,
- <&clkc CLKID_MPLL1>;
- assigned-clock-parents = <0>, <0>, <0>;
- assigned-clock-rates = <294912000>,
- <270950400>,
- <393216000>;
- status = "okay";
-
- dai-link-0 {
- sound-dai = <&frddr_a>;
- };
-
- dai-link-1 {
- sound-dai = <&frddr_b>;
- };
-
- dai-link-2 {
- sound-dai = <&frddr_c>;
- };
-
- dai-link-3 {
- sound-dai = <&toddr_a>;
- };
-
- dai-link-4 {
- sound-dai = <&toddr_b>;
- };
-
- dai-link-5 {
- sound-dai = <&toddr_c>;
- };
-
- /* internal speaker interface */
- dai-link-6 {
- sound-dai = <&tdmif_a>;
- dai-format = "i2s";
- dai-tdm-slot-tx-mask-0 = <1 1>;
- mclk-fs = <256>;
-
- codec-0 {
- sound-dai = <&mono_dac>;
- };
-
- codec-1 {
- sound-dai = <&tohdmitx TOHDMITX_I2S_IN_A>;
- };
- };
-
- /* 8ch hdmi interface */
- dai-link-7 {
- sound-dai = <&tdmif_b>;
- dai-format = "i2s";
- dai-tdm-slot-tx-mask-0 = <1 1>;
- dai-tdm-slot-tx-mask-1 = <1 1>;
- dai-tdm-slot-tx-mask-2 = <1 1>;
- dai-tdm-slot-tx-mask-3 = <1 1>;
- mclk-fs = <256>;
-
- codec {
- sound-dai = <&tohdmitx TOHDMITX_I2S_IN_B>;
- };
- };
-
- /* internal digital mics */
- dai-link-8 {
- sound-dai = <&pdm>;
-
- codec {
- sound-dai = <&dmics>;
- };
- };
-
- /* hdmi glue */
- dai-link-9 {
- sound-dai = <&tohdmitx TOHDMITX_I2S_OUT>;
-
- codec {
- sound-dai = <&hdmi_tx>;
- };
- };
- };
-};
-
-&arb {
- status = "okay";
-};
-
-&cec_AO {
- pinctrl-0 = <&cec_ao_a_h_pins>;
- pinctrl-names = "default";
- status = "disabled";
- hdmi-phandle = <&hdmi_tx>;
-};
-
-&cecb_AO {
- pinctrl-0 = <&cec_ao_b_h_pins>;
- pinctrl-names = "default";
- status = "okay";
- hdmi-phandle = <&hdmi_tx>;
-};
-
-&clkc_audio {
- status = "okay";
-};
-
-&cpu0 {
- cpu-supply = <&vddcpu>;
- operating-points-v2 = <&cpu_opp_table>;
- clocks = <&clkc CLKID_CPU_CLK>;
- clock-latency = <50000>;
-};
-
-&cpu1 {
- cpu-supply = <&vddcpu>;
- operating-points-v2 = <&cpu_opp_table>;
- clocks = <&clkc CLKID_CPU_CLK>;
- clock-latency = <50000>;
-};
-
-&cpu2 {
- cpu-supply = <&vddcpu>;
- operating-points-v2 = <&cpu_opp_table>;
- clocks = <&clkc CLKID_CPU_CLK>;
- clock-latency = <50000>;
-};
-
-&cpu3 {
- cpu-supply = <&vddcpu>;
- operating-points-v2 = <&cpu_opp_table>;
- clocks = <&clkc CLKID_CPU_CLK>;
- clock-latency = <50000>;
-};
-
-&cvbs_vdac_port {
- cvbs_vdac_out: endpoint {
- remote-endpoint = <&cvbs_connector_in>;
- };
-};
-
-ðmac {
- status = "okay";
- phy-handle = <&internal_ephy>;
- phy-mode = "rmii";
-};
-
-&frddr_a {
- status = "okay";
-};
-
-&frddr_b {
- status = "okay";
-};
-
-&frddr_c {
- status = "okay";
-};
-
-&hdmi_tx {
- status = "okay";
- pinctrl-0 = <&hdmitx_hpd_pins>, <&hdmitx_ddc_pins>;
- pinctrl-names = "default";
-};
-
-&hdmi_tx_tmds_port {
- hdmi_tx_tmds_out: endpoint {
- remote-endpoint = <&hdmi_connector_in>;
- };
-};
-
-&i2c3 {
- status = "okay";
- pinctrl-0 = <&i2c3_sda_a_pins>, <&i2c3_sck_a_pins>;
- pinctrl-names = "default";
-};
-
-&ir {
- status = "okay";
- pinctrl-0 = <&remote_input_ao_pins>;
- pinctrl-names = "default";
-};
-
-&pwm_AO_cd {
- pinctrl-0 = <&pwm_ao_d_e_pins>;
- pinctrl-names = "default";
- clocks = <&xtal>;
- clock-names = "clkin1";
- status = "okay";
-};
-
-&pwm_ef {
- status = "okay";
- pinctrl-0 = <&pwm_e_pins>;
- pinctrl-names = "default";
- clocks = <&xtal>;
- clock-names = "clkin0";
-};
-
-&pdm {
- pinctrl-0 = <&pdm_din0_z_pins>, <&pdm_din1_z_pins>,
- <&pdm_din2_z_pins>, <&pdm_din3_z_pins>,
- <&pdm_dclk_z_pins>;
- pinctrl-names = "default";
- status = "okay";
-};
-
-&saradc {
- status = "okay";
- vref-supply = <&vddio_ao1v8>;
-};
-
-/* SDIO */
-&sd_emmc_a {
- status = "okay";
- pinctrl-0 = <&sdio_pins>;
- pinctrl-1 = <&sdio_clk_gate_pins>;
- pinctrl-names = "default", "clk-gate";
- #address-cells = <1>;
- #size-cells = <0>;
-
- bus-width = <4>;
- cap-sd-highspeed;
- sd-uhs-sdr50;
- max-frequency = <100000000>;
-
- non-removable;
- disable-wp;
-
- /* WiFi firmware requires power to be kept while in suspend */
- keep-power-in-suspend;
-
- mmc-pwrseq = <&sdio_pwrseq>;
-
- vmmc-supply = <&vddao_3v3>;
- vqmmc-supply = <&vddio_ao1v8>;
-
- brcmf: wifi at 1 {
- reg = <1>;
- compatible = "brcm,bcm4329-fmac";
- };
-};
-
-/* SD card */
-&sd_emmc_b {
- status = "okay";
- pinctrl-0 = <&sdcard_c_pins>;
- pinctrl-1 = <&sdcard_clk_gate_c_pins>;
- pinctrl-names = "default", "clk-gate";
-
- bus-width = <4>;
- cap-sd-highspeed;
- max-frequency = <50000000>;
- disable-wp;
-
- cd-gpios = <&gpio GPIOC_6 GPIO_ACTIVE_LOW>;
- vmmc-supply = <&vddao_3v3>;
- vqmmc-supply = <&vddao_3v3>;
-};
-
-/* eMMC */
-&sd_emmc_c {
- status = "okay";
- pinctrl-0 = <&emmc_ctrl_pins>, <&emmc_data_8b_pins>, <&emmc_ds_pins>;
- pinctrl-1 = <&emmc_clk_gate_pins>;
- pinctrl-names = "default", "clk-gate";
-
- bus-width = <8>;
- cap-mmc-highspeed;
- mmc-ddr-1_8v;
- mmc-hs200-1_8v;
- max-frequency = <200000000>;
- non-removable;
- disable-wp;
-
- mmc-pwrseq = <&emmc_pwrseq>;
- vmmc-supply = <&vddao_3v3>;
- vqmmc-supply = <&emmc_1v8>;
-};
-
-&tdmif_a {
- pinctrl-0 = <&tdm_a_dout0_pins>, <&tdm_a_fs_pins>, <&tdm_a_sclk_pins>;
- pinctrl-names = "default";
- status = "okay";
-
- assigned-clocks = <&clkc_audio AUD_CLKID_TDM_SCLK_PAD0>,
- <&clkc_audio AUD_CLKID_TDM_LRCLK_PAD0>;
- assigned-clock-parents = <&clkc_audio AUD_CLKID_MST_A_SCLK>,
- <&clkc_audio AUD_CLKID_MST_A_LRCLK>;
- assigned-clock-rates = <0>, <0>;
-};
-
-&tdmif_b {
- status = "okay";
-};
-
-&tdmin_a {
- status = "okay";
-};
-
-&tdmin_b {
- status = "okay";
-};
-
-&tdmout_a {
- status = "okay";
-};
-
-&tdmout_b {
- status = "okay";
-};
-
-&toddr_a {
- status = "okay";
-};
-
-&toddr_b {
- status = "okay";
-};
-
-&toddr_c {
- status = "okay";
-};
-
-&tohdmitx {
- status = "okay";
-};
-
-&uart_A {
- status = "okay";
- pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>;
- pinctrl-names = "default";
- uart-has-rtscts;
-
- bluetooth {
- compatible = "brcm,bcm43438-bt";
- shutdown-gpios = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>;
- max-speed = <2000000>;
- clocks = <&wifi32k>;
- clock-names = "lpo";
- vbat-supply = <&vddao_3v3>;
- vddio-supply = <&vddio_ao1v8>;
- };
-};
-
-&uart_AO {
- status = "okay";
- pinctrl-0 = <&uart_ao_a_pins>;
- pinctrl-names = "default";
-};
-
-&usb {
- status = "okay";
- dr_mode = "host";
-};
diff --git a/arch/arm/dts/meson-g12a-u200.dts b/arch/arm/dts/meson-g12a-u200.dts
deleted file mode 100644
index a26bfe7255..0000000000
--- a/arch/arm/dts/meson-g12a-u200.dts
+++ /dev/null
@@ -1,308 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Copyright (c) 2018 Amlogic, Inc. All rights reserved.
- */
-
-/dts-v1/;
-
-#include "meson-g12a.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/gpio/meson-g12a-gpio.h>
-
-/ {
- compatible = "amlogic,u200", "amlogic,g12a";
- model = "Amlogic Meson G12A U200 Development Board";
-
- aliases {
- serial0 = &uart_AO;
- ethernet0 = ðmac;
- };
-
- chosen {
- stdout-path = "serial0:115200n8";
- };
-
- cvbs-connector {
- compatible = "composite-video-connector";
-
- port {
- cvbs_connector_in: endpoint {
- remote-endpoint = <&cvbs_vdac_out>;
- };
- };
- };
-
- emmc_pwrseq: emmc-pwrseq {
- compatible = "mmc-pwrseq-emmc";
- reset-gpios = <&gpio BOOT_12 GPIO_ACTIVE_LOW>;
- };
-
- hdmi-connector {
- compatible = "hdmi-connector";
- type = "a";
-
- port {
- hdmi_connector_in: endpoint {
- remote-endpoint = <&hdmi_tx_tmds_out>;
- };
- };
- };
-
- memory at 0 {
- device_type = "memory";
- reg = <0x0 0x0 0x0 0x40000000>;
- };
-
- flash_1v8: regulator-flash_1v8 {
- compatible = "regulator-fixed";
- regulator-name = "FLASH_1V8";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- vin-supply = <&vcc_3v3>;
- regulator-always-on;
- };
-
- main_12v: regulator-main_12v {
- compatible = "regulator-fixed";
- regulator-name = "12V";
- regulator-min-microvolt = <12000000>;
- regulator-max-microvolt = <12000000>;
- regulator-always-on;
- };
-
- usb_pwr_en: regulator-usb_pwr_en {
- compatible = "regulator-fixed";
- regulator-name = "USB_PWR_EN";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- vin-supply = <&vcc_5v>;
-
- gpio = <&gpio GPIOH_6 GPIO_ACTIVE_HIGH>;
- enable-active-high;
- };
-
- vcc_1v8: regulator-vcc_1v8 {
- compatible = "regulator-fixed";
- regulator-name = "VCC_1V8";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- vin-supply = <&vcc_3v3>;
- regulator-always-on;
- };
-
- vcc_3v3: regulator-vcc_3v3 {
- compatible = "regulator-fixed";
- regulator-name = "VCC_3V3";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- vin-supply = <&vddao_3v3>;
- regulator-always-on;
- /* FIXME: actually controlled by VDDCPU_B_EN */
- };
-
- vcc_5v: regulator-vcc_5v {
- compatible = "regulator-fixed";
- regulator-name = "VCC_5V";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- vin-supply = <&main_12v>;
-
- gpio = <&gpio GPIOH_8 GPIO_OPEN_DRAIN>;
- enable-active-high;
- };
-
- vddao_1v8: regulator-vddao_1v8 {
- compatible = "regulator-fixed";
- regulator-name = "VDDAO_1V8";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- vin-supply = <&vddao_3v3>;
- regulator-always-on;
- };
-
- vddao_3v3: regulator-vddao_3v3 {
- compatible = "regulator-fixed";
- regulator-name = "VDDAO_3V3";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- vin-supply = <&main_12v>;
- regulator-always-on;
- };
-
- vddcpu: regulator-vddcpu {
- /*
- * MP8756GD Regulator.
- */
- compatible = "pwm-regulator";
-
- regulator-name = "VDDCPU";
- regulator-min-microvolt = <721000>;
- regulator-max-microvolt = <1022000>;
-
- vin-supply = <&main_12v>;
-
- pwms = <&pwm_AO_cd 1 1250 0>;
- pwm-dutycycle-range = <100 0>;
-
- regulator-boot-on;
- regulator-always-on;
- };
-};
-
-&cec_AO {
- pinctrl-0 = <&cec_ao_a_h_pins>;
- pinctrl-names = "default";
- status = "disabled";
- hdmi-phandle = <&hdmi_tx>;
-};
-
-&cecb_AO {
- pinctrl-0 = <&cec_ao_b_h_pins>;
- pinctrl-names = "default";
- status = "okay";
- hdmi-phandle = <&hdmi_tx>;
-};
-
-&cpu0 {
- cpu-supply = <&vddcpu>;
- operating-points-v2 = <&cpu_opp_table>;
- clocks = <&clkc CLKID_CPU_CLK>;
- clock-latency = <50000>;
-};
-
-&cpu1 {
- cpu-supply = <&vddcpu>;
- operating-points-v2 = <&cpu_opp_table>;
- clocks = <&clkc CLKID_CPU_CLK>;
- clock-latency = <50000>;
-};
-
-&cpu2 {
- cpu-supply = <&vddcpu>;
- operating-points-v2 = <&cpu_opp_table>;
- clocks = <&clkc CLKID_CPU_CLK>;
- clock-latency = <50000>;
-};
-
-&cpu3 {
- cpu-supply = <&vddcpu>;
- operating-points-v2 = <&cpu_opp_table>;
- clocks = <&clkc CLKID_CPU_CLK>;
- clock-latency = <50000>;
-};
-
-&cvbs_vdac_port {
- cvbs_vdac_out: endpoint {
- remote-endpoint = <&cvbs_connector_in>;
- };
-};
-
-ðmac {
- status = "okay";
- phy-handle = <&internal_ephy>;
- phy-mode = "rmii";
-};
-
-&hdmi_tx {
- status = "okay";
- pinctrl-0 = <&hdmitx_hpd_pins>, <&hdmitx_ddc_pins>;
- pinctrl-names = "default";
- hdmi-supply = <&vcc_5v>;
-};
-
-&hdmi_tx_tmds_port {
- hdmi_tx_tmds_out: endpoint {
- remote-endpoint = <&hdmi_connector_in>;
- };
-};
-
-&ir {
- status = "okay";
- pinctrl-0 = <&remote_input_ao_pins>;
- pinctrl-names = "default";
-};
-
-/* i2c Touch */
-&i2c0 {
- status = "okay";
- pinctrl-0 = <&i2c0_sda_z0_pins>, <&i2c0_sck_z1_pins>;
- pinctrl-names = "default";
-};
-
-/* i2c CM */
-&i2c2 {
- status = "okay";
- pinctrl-0 = <&i2c2_sda_z_pins>, <&i2c2_sck_z_pins>;
- pinctrl-names = "default";
-};
-
-/* i2c Audio */
-&i2c3 {
- status = "okay";
- pinctrl-0 = <&i2c3_sda_a_pins>, <&i2c3_sck_a_pins>;
- pinctrl-names = "default";
-};
-
-&pwm_AO_cd {
- pinctrl-0 = <&pwm_ao_d_e_pins>;
- pinctrl-names = "default";
- clocks = <&xtal>;
- clock-names = "clkin1";
- status = "okay";
-};
-
-/* SD card */
-&sd_emmc_b {
- status = "okay";
- pinctrl-0 = <&sdcard_c_pins>;
- pinctrl-1 = <&sdcard_clk_gate_c_pins>;
- pinctrl-names = "default", "clk-gate";
-
- bus-width = <4>;
- cap-sd-highspeed;
- max-frequency = <50000000>;
- disable-wp;
-
- cd-gpios = <&gpio GPIOC_6 GPIO_ACTIVE_LOW>;
- vmmc-supply = <&vddao_3v3>;
- vqmmc-supply = <&vddao_3v3>;
-};
-
-/* eMMC */
-&sd_emmc_c {
- status = "okay";
- pinctrl-0 = <&emmc_ctrl_pins>, <&emmc_data_8b_pins>, <&emmc_ds_pins>;
- pinctrl-1 = <&emmc_clk_gate_pins>;
- pinctrl-names = "default", "clk-gate";
-
- bus-width = <8>;
- cap-mmc-highspeed;
- mmc-ddr-1_8v;
- mmc-hs200-1_8v;
- max-frequency = <200000000>;
- non-removable;
- disable-wp;
-
- mmc-pwrseq = <&emmc_pwrseq>;
- vmmc-supply = <&vcc_3v3>;
- vqmmc-supply = <&flash_1v8>;
-};
-
-&uart_AO {
- status = "okay";
- pinctrl-0 = <&uart_ao_a_pins>;
- pinctrl-names = "default";
-};
-
-&usb {
- status = "okay";
- vbus-supply = <&usb_pwr_en>;
-};
-
-&usb2_phy0 {
- phy-supply = <&vcc_5v>;
-};
-
-&usb2_phy1 {
- phy-supply = <&vcc_5v>;
-};
diff --git a/arch/arm/dts/meson-g12a.dtsi b/arch/arm/dts/meson-g12a.dtsi
deleted file mode 100644
index 7677764eee..0000000000
--- a/arch/arm/dts/meson-g12a.dtsi
+++ /dev/null
@@ -1,140 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Copyright (c) 2018 Amlogic, Inc. All rights reserved.
- */
-
-#include "meson-g12.dtsi"
-
-/ {
- compatible = "amlogic,g12a";
-
- cpus {
- #address-cells = <0x2>;
- #size-cells = <0x0>;
-
- cpu0: cpu at 0 {
- device_type = "cpu";
- compatible = "arm,cortex-a53";
- reg = <0x0 0x0>;
- enable-method = "psci";
- next-level-cache = <&l2>;
- #cooling-cells = <2>;
- };
-
- cpu1: cpu at 1 {
- device_type = "cpu";
- compatible = "arm,cortex-a53";
- reg = <0x0 0x1>;
- enable-method = "psci";
- next-level-cache = <&l2>;
- #cooling-cells = <2>;
- };
-
- cpu2: cpu at 2 {
- device_type = "cpu";
- compatible = "arm,cortex-a53";
- reg = <0x0 0x2>;
- enable-method = "psci";
- next-level-cache = <&l2>;
- #cooling-cells = <2>;
- };
-
- cpu3: cpu at 3 {
- device_type = "cpu";
- compatible = "arm,cortex-a53";
- reg = <0x0 0x3>;
- enable-method = "psci";
- next-level-cache = <&l2>;
- #cooling-cells = <2>;
- };
-
- l2: l2-cache0 {
- compatible = "cache";
- cache-level = <2>;
- };
- };
-
- cpu_opp_table: opp-table {
- compatible = "operating-points-v2";
- opp-shared;
-
- opp-100000000 {
- opp-hz = /bits/ 64 <100000000>;
- opp-microvolt = <731000>;
- };
-
- opp-250000000 {
- opp-hz = /bits/ 64 <250000000>;
- opp-microvolt = <731000>;
- };
-
- opp-500000000 {
- opp-hz = /bits/ 64 <500000000>;
- opp-microvolt = <731000>;
- };
-
- opp-667000000 {
- opp-hz = /bits/ 64 <666666666>;
- opp-microvolt = <731000>;
- };
-
- opp-1000000000 {
- opp-hz = /bits/ 64 <1000000000>;
- opp-microvolt = <731000>;
- };
-
- opp-1200000000 {
- opp-hz = /bits/ 64 <1200000000>;
- opp-microvolt = <731000>;
- };
-
- opp-1398000000 {
- opp-hz = /bits/ 64 <1398000000>;
- opp-microvolt = <761000>;
- };
-
- opp-1512000000 {
- opp-hz = /bits/ 64 <1512000000>;
- opp-microvolt = <791000>;
- };
-
- opp-1608000000 {
- opp-hz = /bits/ 64 <1608000000>;
- opp-microvolt = <831000>;
- };
-
- opp-1704000000 {
- opp-hz = /bits/ 64 <1704000000>;
- opp-microvolt = <861000>;
- };
-
- opp-1800000000 {
- opp-hz = /bits/ 64 <1800000000>;
- opp-microvolt = <981000>;
- };
- };
-};
-
-&cpu_thermal {
- cooling-maps {
- map0 {
- trip = <&cpu_passive>;
- cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
- <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
- <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
- <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
- };
-
- map1 {
- trip = <&cpu_hot>;
- cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
- <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
- <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
- <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
- };
- };
-};
-
-&pmu {
- compatible = "amlogic,g12a-ddr-pmu";
-};
diff --git a/arch/arm/dts/meson-g12b-a311d-bananapi-m2s.dts b/arch/arm/dts/meson-g12b-a311d-bananapi-m2s.dts
deleted file mode 100644
index 31365316b2..0000000000
--- a/arch/arm/dts/meson-g12b-a311d-bananapi-m2s.dts
+++ /dev/null
@@ -1,33 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Copyright (c) 2023 Christian Hewitt <christianshewitt at gmail.com>
- */
-
-/dts-v1/;
-
-#include "meson-g12b-a311d.dtsi"
-#include "meson-g12b-bananapi.dtsi"
-
-/ {
- compatible = "bananapi,bpi-m2s", "amlogic,a311d", "amlogic,g12b";
- model = "BananaPi M2S";
-
- aliases {
- i2c0 = &i2c1;
- i2c1 = &i2c3;
- };
-};
-
-/* Camera (CSI) bus */
-&i2c1 {
- status = "okay";
- pinctrl-0 = <&i2c1_sda_h6_pins>, <&i2c1_sck_h7_pins>;
- pinctrl-names = "default";
-};
-
-/* Display (DSI) bus */
-&i2c3 {
- status = "okay";
- pinctrl-0 = <&i2c3_sda_a_pins>, <&i2c3_sck_a_pins>;
- pinctrl-names = "default";
-};
diff --git a/arch/arm/dts/meson-g12b-a311d-khadas-vim3.dts b/arch/arm/dts/meson-g12b-a311d-khadas-vim3.dts
deleted file mode 100644
index 124a809010..0000000000
--- a/arch/arm/dts/meson-g12b-a311d-khadas-vim3.dts
+++ /dev/null
@@ -1,41 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Copyright (c) 2019 BayLibre, SAS
- * Author: Neil Armstrong <narmstrong at baylibre.com>
- * Copyright (c) 2019 Christian Hewitt <christianshewitt at gmail.com>
- */
-
-/dts-v1/;
-
-#include "meson-g12b-a311d.dtsi"
-#include "meson-khadas-vim3.dtsi"
-#include "meson-g12b-khadas-vim3.dtsi"
-
-/ {
- compatible = "khadas,vim3", "amlogic,a311d", "amlogic,g12b";
-};
-
-/*
- * The VIM3 on-board MCU can mux the PCIe/USB3.0 shared differential
- * lines using a FUSB340TMX USB 3.1 SuperSpeed Data Switch between
- * an USB3.0 Type A connector and a M.2 Key M slot.
- * The PHY driving these differential lines is shared between
- * the USB3.0 controller and the PCIe Controller, thus only
- * a single controller can use it.
- * If the MCU is configured to mux the PCIe/USB3.0 differential lines
- * to the M.2 Key M slot, uncomment the following block to disable
- * USB3.0 from the USB Complex and enable the PCIe controller.
- * The End User is not expected to uncomment the following except for
- * testing purposes, but instead rely on the firmware/bootloader to
- * update these nodes accordingly if PCIe mode is selected by the MCU.
- */
-/*
-&pcie {
- status = "okay";
-};
-
-&usb {
- phys = <&usb2_phy0>, <&usb2_phy1>;
- phy-names = "usb2-phy0", "usb2-phy1";
-};
- */
diff --git a/arch/arm/dts/meson-g12b-a311d.dtsi b/arch/arm/dts/meson-g12b-a311d.dtsi
deleted file mode 100644
index d61f43052a..0000000000
--- a/arch/arm/dts/meson-g12b-a311d.dtsi
+++ /dev/null
@@ -1,149 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Copyright (c) 2019 BayLibre, SAS
- * Author: Neil Armstrong <narmstrong at baylibre.com>
- */
-
-#include "meson-g12b.dtsi"
-
-/ {
- cpu_opp_table_0: opp-table-0 {
- compatible = "operating-points-v2";
- opp-shared;
-
- opp-100000000 {
- opp-hz = /bits/ 64 <100000000>;
- opp-microvolt = <731000>;
- };
-
- opp-250000000 {
- opp-hz = /bits/ 64 <250000000>;
- opp-microvolt = <731000>;
- };
-
- opp-500000000 {
- opp-hz = /bits/ 64 <500000000>;
- opp-microvolt = <731000>;
- };
-
- opp-667000000 {
- opp-hz = /bits/ 64 <667000000>;
- opp-microvolt = <731000>;
- };
-
- opp-1000000000 {
- opp-hz = /bits/ 64 <1000000000>;
- opp-microvolt = <761000>;
- };
-
- opp-1200000000 {
- opp-hz = /bits/ 64 <1200000000>;
- opp-microvolt = <781000>;
- };
-
- opp-1398000000 {
- opp-hz = /bits/ 64 <1398000000>;
- opp-microvolt = <811000>;
- };
-
- opp-1512000000 {
- opp-hz = /bits/ 64 <1512000000>;
- opp-microvolt = <861000>;
- };
-
- opp-1608000000 {
- opp-hz = /bits/ 64 <1608000000>;
- opp-microvolt = <901000>;
- };
-
- opp-1704000000 {
- opp-hz = /bits/ 64 <1704000000>;
- opp-microvolt = <951000>;
- };
-
- opp-1800000000 {
- opp-hz = /bits/ 64 <1800000000>;
- opp-microvolt = <1001000>;
- };
- };
-
- cpub_opp_table_1: opp-table-1 {
- compatible = "operating-points-v2";
- opp-shared;
-
- opp-100000000 {
- opp-hz = /bits/ 64 <100000000>;
- opp-microvolt = <731000>;
- };
-
- opp-250000000 {
- opp-hz = /bits/ 64 <250000000>;
- opp-microvolt = <731000>;
- };
-
- opp-500000000 {
- opp-hz = /bits/ 64 <500000000>;
- opp-microvolt = <731000>;
- };
-
- opp-667000000 {
- opp-hz = /bits/ 64 <667000000>;
- opp-microvolt = <731000>;
- };
-
- opp-1000000000 {
- opp-hz = /bits/ 64 <1000000000>;
- opp-microvolt = <731000>;
- };
-
- opp-1200000000 {
- opp-hz = /bits/ 64 <1200000000>;
- opp-microvolt = <751000>;
- };
-
- opp-1398000000 {
- opp-hz = /bits/ 64 <1398000000>;
- opp-microvolt = <771000>;
- };
-
- opp-1512000000 {
- opp-hz = /bits/ 64 <1512000000>;
- opp-microvolt = <771000>;
- };
-
- opp-1608000000 {
- opp-hz = /bits/ 64 <1608000000>;
- opp-microvolt = <781000>;
- };
-
- opp-1704000000 {
- opp-hz = /bits/ 64 <1704000000>;
- opp-microvolt = <791000>;
- };
-
- opp-1800000000 {
- opp-hz = /bits/ 64 <1800000000>;
- opp-microvolt = <831000>;
- };
-
- opp-1908000000 {
- opp-hz = /bits/ 64 <1908000000>;
- opp-microvolt = <861000>;
- };
-
- opp-2016000000 {
- opp-hz = /bits/ 64 <2016000000>;
- opp-microvolt = <911000>;
- };
-
- opp-2108000000 {
- opp-hz = /bits/ 64 <2108000000>;
- opp-microvolt = <951000>;
- };
-
- opp-2208000000 {
- opp-hz = /bits/ 64 <2208000000>;
- opp-microvolt = <1011000>;
- };
- };
-};
diff --git a/arch/arm/dts/meson-g12b-bananapi-cm4-cm4io.dts b/arch/arm/dts/meson-g12b-bananapi-cm4-cm4io.dts
deleted file mode 100644
index 1b0c3881c6..0000000000
--- a/arch/arm/dts/meson-g12b-bananapi-cm4-cm4io.dts
+++ /dev/null
@@ -1,165 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Copyright (c) 2023 Neil Armstrong <neil.armstrong at linaro.org>
- */
-
-/dts-v1/;
-
-#include "meson-g12b-bananapi-cm4.dtsi"
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/leds/common.h>
-#include <dt-bindings/sound/meson-g12a-tohdmitx.h>
-
-/ {
- compatible = "bananapi,bpi-cm4io", "bananapi,bpi-cm4", "amlogic,a311d", "amlogic,g12b";
- model = "BananaPi BPI-CM4IO Baseboard with BPI-CM4 Module";
-
- aliases {
- ethernet0 = ðmac;
- i2c0 = &i2c1;
- i2c1 = &i2c3;
- };
-
- adc-keys {
- compatible = "adc-keys";
- io-channels = <&saradc 2>;
- io-channel-names = "buttons";
- keyup-threshold-microvolt = <1710000>;
-
- button-function {
- label = "Function";
- linux,code = <KEY_FN>;
- press-threshold-microvolt = <10000>;
- };
- };
-
- hdmi_connector: hdmi-connector {
- compatible = "hdmi-connector";
- type = "a";
-
- port {
- hdmi_connector_in: endpoint {
- remote-endpoint = <&hdmi_tx_tmds_out>;
- };
- };
- };
-
- leds {
- compatible = "gpio-leds";
-
- led-blue {
- color = <LED_COLOR_ID_BLUE>;
- function = LED_FUNCTION_STATUS;
- gpios = <&gpio_ao GPIOAO_7 GPIO_ACTIVE_HIGH>;
- linux,default-trigger = "heartbeat";
- };
-
- led-green {
- color = <LED_COLOR_ID_GREEN>;
- function = LED_FUNCTION_STATUS;
- gpios = <&gpio_ao GPIOAO_2 GPIO_ACTIVE_HIGH>;
- };
- };
-
- sound {
- compatible = "amlogic,axg-sound-card";
- model = "BPI-CM4IO";
- audio-aux-devs = <&tdmout_b>;
- audio-routing = "TDMOUT_B IN 0", "FRDDR_A OUT 1",
- "TDMOUT_B IN 1", "FRDDR_B OUT 1",
- "TDMOUT_B IN 2", "FRDDR_C OUT 1",
- "TDM_B Playback", "TDMOUT_B OUT";
-
- assigned-clocks = <&clkc CLKID_MPLL2>,
- <&clkc CLKID_MPLL0>,
- <&clkc CLKID_MPLL1>;
- assigned-clock-parents = <0>, <0>, <0>;
- assigned-clock-rates = <294912000>,
- <270950400>,
- <393216000>;
-
- dai-link-0 {
- sound-dai = <&frddr_a>;
- };
-
- dai-link-1 {
- sound-dai = <&frddr_b>;
- };
-
- dai-link-2 {
- sound-dai = <&frddr_c>;
- };
-
- /* 8ch hdmi interface */
- dai-link-3 {
- sound-dai = <&tdmif_b>;
- dai-format = "i2s";
- dai-tdm-slot-tx-mask-0 = <1 1>;
- dai-tdm-slot-tx-mask-1 = <1 1>;
- dai-tdm-slot-tx-mask-2 = <1 1>;
- dai-tdm-slot-tx-mask-3 = <1 1>;
- mclk-fs = <256>;
-
- codec {
- sound-dai = <&tohdmitx TOHDMITX_I2S_IN_B>;
- };
- };
-
- /* hdmi glue */
- dai-link-4 {
- sound-dai = <&tohdmitx TOHDMITX_I2S_OUT>;
-
- codec {
- sound-dai = <&hdmi_tx>;
- };
- };
- };
-};
-
-&cecb_AO {
- status = "okay";
-};
-
-ðmac {
- status = "okay";
-};
-
-&hdmi_tx {
- status = "okay";
-};
-
-&hdmi_tx_tmds_port {
- hdmi_tx_tmds_out: endpoint {
- remote-endpoint = <&hdmi_connector_in>;
- };
-};
-
-/* CSI port */
-&i2c1 {
- status = "okay";
-};
-
-/* DSI port for touchscreen */
-&i2c3 {
- status = "okay";
-};
-
-/* miniPCIe port with USB + SIM slot */
-&pcie {
- status = "okay";
-};
-
-&sd_emmc_b {
- status = "okay";
-};
-
-&tohdmitx {
- status = "okay";
-};
-
-/* Peripheral Only USB-C port */
-&usb {
- dr_mode = "peripheral";
-
- status = "okay";
-};
diff --git a/arch/arm/dts/meson-g12b-bananapi-cm4.dtsi b/arch/arm/dts/meson-g12b-bananapi-cm4.dtsi
deleted file mode 100644
index 97e522921b..0000000000
--- a/arch/arm/dts/meson-g12b-bananapi-cm4.dtsi
+++ /dev/null
@@ -1,388 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Copyright (c) 2023 Neil Armstrong <neil.armstrong at linaro.org>
- */
-
-#include "meson-g12b-a311d.dtsi"
-#include <dt-bindings/gpio/meson-g12a-gpio.h>
-
-/ {
- aliases {
- serial0 = &uart_AO;
- rtc1 = &vrtc;
- };
-
- chosen {
- stdout-path = "serial0:115200n8";
- };
-
- emmc_pwrseq: emmc-pwrseq {
- compatible = "mmc-pwrseq-emmc";
- reset-gpios = <&gpio BOOT_12 GPIO_ACTIVE_LOW>;
- };
-
- memory at 0 {
- device_type = "memory";
- reg = <0x0 0x0 0x0 0x40000000>;
- };
-
- sdio_pwrseq: sdio-pwrseq {
- compatible = "mmc-pwrseq-simple";
- reset-gpios = <&gpio GPIOAO_6 GPIO_ACTIVE_LOW>;
- clocks = <&wifi32k>;
- clock-names = "ext_clock";
- };
-
- emmc_1v8: regulator-emmc-1v8 {
- compatible = "regulator-fixed";
- regulator-name = "EMMC_1V8";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- vin-supply = <&vddao_3v3>;
- regulator-always-on;
- };
-
- dc_in: regulator-dc-in {
- compatible = "regulator-fixed";
- regulator-name = "DC_IN";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- regulator-always-on;
- };
-
- vddio_c: regulator-vddio-c {
- compatible = "regulator-gpio";
- regulator-name = "VDDIO_C";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <3300000>;
-
- enable-gpio = <&gpio_ao GPIOAO_3 GPIO_OPEN_DRAIN>;
- enable-active-high;
- regulator-always-on;
-
- gpios = <&gpio_ao GPIOAO_9 GPIO_OPEN_DRAIN>;
- gpios-states = <1>;
-
- states = <1800000 0>,
- <3300000 1>;
- };
-
- vddao_1v8: regulator-vddao-1v8 {
- compatible = "regulator-fixed";
- regulator-name = "VDDAO_1V8";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- vin-supply = <&vddao_3v3>;
- regulator-always-on;
- };
-
- vddao_3v3: regulator-vddao-3v3 {
- compatible = "regulator-fixed";
- regulator-name = "VDDAO_3V3";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- vin-supply = <&dc_in>;
- regulator-always-on;
- };
-
- vddcpu_a: regulator-vddcpu-a {
- /*
- * MP8756GD DC/DC Regulator.
- */
- compatible = "pwm-regulator";
-
- regulator-name = "VDDCPU_A";
- regulator-min-microvolt = <680000>;
- regulator-max-microvolt = <1040000>;
-
- pwm-supply = <&dc_in>;
-
- pwms = <&pwm_ab 0 1250 0>;
- pwm-dutycycle-range = <100 0>;
-
- regulator-boot-on;
- regulator-always-on;
- };
-
- vddcpu_b: regulator-vddcpu-b {
- /*
- * SY8120B1ABC DC/DC Regulator.
- */
- compatible = "pwm-regulator";
-
- regulator-name = "VDDCPU_B";
- regulator-min-microvolt = <680000>;
- regulator-max-microvolt = <1040000>;
-
- pwm-supply = <&dc_in>;
-
- pwms = <&pwm_AO_cd 1 1250 0>;
- pwm-dutycycle-range = <100 0>;
-
- regulator-boot-on;
- regulator-always-on;
- };
-
- wifi32k: wifi32k {
- compatible = "pwm-clock";
- #clock-cells = <0>;
- clock-frequency = <32768>;
- pwms = <&pwm_ef 0 30518 0>; /* PWM_E at 32.768KHz */
- };
-};
-
-&arb {
- status = "okay";
-};
-
-&clkc_audio {
- status = "okay";
-};
-
-&cec_AO {
- pinctrl-0 = <&cec_ao_a_h_pins>;
- pinctrl-names = "default";
- hdmi-phandle = <&hdmi_tx>;
-};
-
-&cecb_AO {
- pinctrl-0 = <&cec_ao_b_h_pins>;
- pinctrl-names = "default";
- hdmi-phandle = <&hdmi_tx>;
-};
-
-&cpu0 {
- cpu-supply = <&vddcpu_b>;
- operating-points-v2 = <&cpu_opp_table_0>;
- clocks = <&clkc CLKID_CPU_CLK>;
- clock-latency = <50000>;
-};
-
-&cpu1 {
- cpu-supply = <&vddcpu_b>;
- operating-points-v2 = <&cpu_opp_table_0>;
- clocks = <&clkc CLKID_CPU_CLK>;
- clock-latency = <50000>;
-};
-
-&cpu100 {
- cpu-supply = <&vddcpu_a>;
- operating-points-v2 = <&cpub_opp_table_1>;
- clocks = <&clkc CLKID_CPUB_CLK>;
- clock-latency = <50000>;
-};
-
-&cpu101 {
- cpu-supply = <&vddcpu_a>;
- operating-points-v2 = <&cpub_opp_table_1>;
- clocks = <&clkc CLKID_CPUB_CLK>;
- clock-latency = <50000>;
-};
-
-&cpu102 {
- cpu-supply = <&vddcpu_a>;
- operating-points-v2 = <&cpub_opp_table_1>;
- clocks = <&clkc CLKID_CPUB_CLK>;
- clock-latency = <50000>;
-};
-
-&cpu103 {
- cpu-supply = <&vddcpu_a>;
- operating-points-v2 = <&cpub_opp_table_1>;
- clocks = <&clkc CLKID_CPUB_CLK>;
- clock-latency = <50000>;
-};
-
-&ext_mdio {
- external_phy: ethernet-phy at 0 {
- /* Realtek RTL8211F (0x001cc916) */
- reg = <0>;
- max-speed = <1000>;
-
- interrupt-parent = <&gpio_intc>;
- /* MAC_INTR on GPIOZ_14 */
- interrupts = <26 IRQ_TYPE_LEVEL_LOW>;
- };
-};
-
-/* Ethernet to be enabled in baseboard DT */
-ðmac {
- pinctrl-0 = <ð_pins>, <ð_rgmii_pins>;
- pinctrl-names = "default";
- phy-mode = "rgmii-txid";
- phy-handle = <&external_phy>;
-};
-
-&frddr_a {
- status = "okay";
-};
-
-&frddr_b {
- status = "okay";
-};
-
-&frddr_c {
- status = "okay";
-};
-
-/* HDMI to be enabled in baseboard DT */
-&hdmi_tx {
- pinctrl-0 = <&hdmitx_hpd_pins>, <&hdmitx_ddc_pins>;
- pinctrl-names = "default";
- hdmi-supply = <&dc_in>;
-};
-
-/* "Camera" I2C bus */
-&i2c1 {
- pinctrl-0 = <&i2c1_sda_h6_pins>, <&i2c1_sck_h7_pins>;
- pinctrl-names = "default";
-};
-
-/* Main I2C bus */
-&i2c2 {
- pinctrl-0 = <&i2c2_sda_x_pins>, <&i2c2_sck_x_pins>;
- pinctrl-names = "default";
-};
-
-/* "ID" I2C bus */
-&i2c3 {
- pinctrl-0 = <&i2c3_sda_a_pins>, <&i2c3_sck_a_pins>;
- pinctrl-names = "default";
-};
-
-&pcie {
- reset-gpios = <&gpio GPIOA_8 GPIO_ACTIVE_LOW>;
-};
-
-&pwm_ab {
- pinctrl-0 = <&pwm_a_e_pins>;
- pinctrl-names = "default";
- clocks = <&xtal>;
- clock-names = "clkin0";
-
- status = "okay";
-};
-
-&pwm_ef {
- pinctrl-0 = <&pwm_e_pins>;
- pinctrl-names = "default";
-
- status = "okay";
-};
-
-&pwm_AO_cd {
- pinctrl-0 = <&pwm_ao_d_e_pins>;
- pinctrl-names = "default";
- clocks = <&xtal>;
- clock-names = "clkin1";
-
- status = "okay";
-};
-
-&saradc {
- vref-supply = <&vddao_1v8>;
-
- status = "okay";
-};
-
-/* on-module SDIO WiFi */
-&sd_emmc_a {
- pinctrl-0 = <&sdio_pins>;
- pinctrl-1 = <&sdio_clk_gate_pins>;
- pinctrl-names = "default", "clk-gate";
- #address-cells = <1>;
- #size-cells = <0>;
-
- bus-width = <4>;
- sd-uhs-sdr104;
- max-frequency = <50000000>;
-
- non-removable;
- disable-wp;
-
- /* WiFi firmware requires power in suspend */
- keep-power-in-suspend;
-
- mmc-pwrseq = <&sdio_pwrseq>;
-
- vmmc-supply = <&vddao_3v3>;
- vqmmc-supply = <&vddao_3v3>;
-
- status = "okay";
-
- rtl8822cs: wifi at 1 {
- reg = <1>;
- };
-};
-
-/* SD card to be enabled in baseboard DT */
-&sd_emmc_b {
- pinctrl-0 = <&sdcard_c_pins>;
- pinctrl-1 = <&sdcard_clk_gate_c_pins>;
- pinctrl-names = "default", "clk-gate";
-
- bus-width = <4>;
- cap-sd-highspeed;
- max-frequency = <50000000>;
- disable-wp;
-
- cd-gpios = <&gpio GPIOC_6 GPIO_ACTIVE_LOW>;
- vmmc-supply = <&vddao_3v3>;
- vqmmc-supply = <&vddio_c>;
-};
-
-/* on-module eMMC */
-&sd_emmc_c {
- pinctrl-0 = <&emmc_ctrl_pins>, <&emmc_data_8b_pins>, <&emmc_ds_pins>;
- pinctrl-1 = <&emmc_clk_gate_pins>;
- pinctrl-names = "default", "clk-gate";
-
- bus-width = <8>;
- cap-mmc-highspeed;
- mmc-ddr-1_8v;
- mmc-hs200-1_8v;
- max-frequency = <200000000>;
- disable-wp;
-
- mmc-pwrseq = <&emmc_pwrseq>;
- vmmc-supply = <&vddao_3v3>;
- vqmmc-supply = <&vddao_1v8>;
-
- status = "okay";
-};
-
-&tdmif_b {
- status = "okay";
-};
-
-&tdmout_b {
- status = "okay";
-};
-
-/* on-module UART BT */
-&uart_A {
- pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>;
- pinctrl-names = "default";
- uart-has-rtscts;
-
- status = "okay";
-
- bluetooth {
- compatible = "realtek,rtl8822cs-bt";
- enable-gpios = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>;
- host-wake-gpios = <&gpio GPIOX_19 GPIO_ACTIVE_HIGH>;
- device-wake-gpios = <&gpio GPIOX_18 GPIO_ACTIVE_HIGH>;
- };
-};
-
-&uart_AO {
- pinctrl-0 = <&uart_ao_a_pins>;
- pinctrl-names = "default";
-
- status = "okay";
-};
-
-&usb {
- phys = <&usb2_phy0>, <&usb2_phy1>;
- phy-names = "usb2-phy0", "usb2-phy1";
-};
diff --git a/arch/arm/dts/meson-g12b-bananapi.dtsi b/arch/arm/dts/meson-g12b-bananapi.dtsi
deleted file mode 100644
index 83709787eb..0000000000
--- a/arch/arm/dts/meson-g12b-bananapi.dtsi
+++ /dev/null
@@ -1,521 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Copyright (c) 2019 BayLibre, SAS
- * Author: Neil Armstrong <narmstrong at baylibre.com>
- * Copyright (c) 2023 Christian Hewitt <christianshewitt at gmail.com>
- */
-
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/leds/common.h>
-#include <dt-bindings/gpio/meson-g12a-gpio.h>
-#include <dt-bindings/sound/meson-g12a-tohdmitx.h>
-
-/ {
- aliases {
- serial0 = &uart_AO;
- ethernet0 = ðmac;
- rtc1 = &vrtc;
- };
-
- chosen {
- stdout-path = "serial0:115200n8";
- };
-
- memory at 0 {
- device_type = "memory";
- reg = <0x0 0x0 0x0 0x80000000>; /* 2 GiB or 4 GiB */
- };
-
- adc-keys {
- compatible = "adc-keys";
- io-channels = <&saradc 2>;
- io-channel-names = "buttons";
- keyup-threshold-microvolt = <1710000>;
-
- button-function {
- label = "RST";
- linux,code = <KEY_POWER>;
- press-threshold-microvolt = <10000>;
- };
- };
-
- emmc_pwrseq: emmc-pwrseq {
- compatible = "mmc-pwrseq-emmc";
- reset-gpios = <&gpio BOOT_12 GPIO_ACTIVE_LOW>;
- };
-
- fan0: pwm-fan {
- compatible = "pwm-fan";
- #cooling-cells = <2>;
- cooling-min-state = <0>;
- cooling-max-state = <3>;
- cooling-levels = <0 120 170 220>;
- pwms = <&pwm_cd 1 40000 0>;
- };
-
- hdmi-connector {
- compatible = "hdmi-connector";
- type = "a";
-
- port {
- hdmi_connector_in: endpoint {
- remote-endpoint = <&hdmi_tx_tmds_out>;
- };
- };
- };
-
- leds {
- compatible = "gpio-leds";
-
- led-0 {
- color = <LED_COLOR_ID_BLUE>;
- function = LED_FUNCTION_STATUS;
- gpios = <&gpio_ao GPIOAO_7 GPIO_ACTIVE_LOW>;
- linux,default-trigger = "heartbeat";
- };
-
- led-1 {
- color = <LED_COLOR_ID_GREEN>;
- function = LED_FUNCTION_STATUS;
- gpios = <&gpio_ao GPIOAO_2 GPIO_ACTIVE_LOW>;
- };
- };
-
- sdio_pwrseq: sdio-pwrseq {
- compatible = "mmc-pwrseq-simple";
- reset-gpios = <&gpio GPIOX_6 GPIO_ACTIVE_LOW>;
- clocks = <&wifi32k>;
- clock-names = "ext_clock";
- };
-
- wifi32k: wifi32k {
- compatible = "pwm-clock";
- #clock-cells = <0>;
- clock-frequency = <32768>;
- pwms = <&pwm_ef 0 30518 0>; /* PWM_E at 32.768KHz */
- };
-
- dc_in: regulator-dc-in {
- compatible = "regulator-fixed";
- regulator-name = "DC_IN";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- regulator-always-on;
- };
-
- vcc_5v: regulator-vcc-5v {
- compatible = "regulator-fixed";
- regulator-name = "VCC_5V";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- vin-supply = <&dc_in>;
-
- gpio = <&gpio GPIOH_8 GPIO_OPEN_DRAIN>;
- enable-active-high;
- };
-
- vcc_3v3: regulator-vcc-3v3 {
- compatible = "regulator-fixed";
- regulator-name = "VCC_3V3";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- vin-supply = <&vsys_3v3>;
- regulator-always-on;
- };
-
- vcc_1v8: regulator-vcc-1v8 {
- compatible = "regulator-fixed";
- regulator-name = "VCC_1V8";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- vin-supply = <&vcc_3v3>;
- regulator-always-on;
- };
-
- vddao_1v8: regulator-vddao-1v8 {
- compatible = "regulator-fixed";
- regulator-name = "VDDIO_AO1V8";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- vin-supply = <&vsys_3v3>;
- regulator-always-on;
- };
-
- vddcpu_a: regulator-vddcpu-a {
- compatible = "pwm-regulator";
- regulator-name = "VDDCPU_A";
- regulator-min-microvolt = <690000>;
- regulator-max-microvolt = <1050000>;
- pwm-supply = <&dc_in>;
- pwms = <&pwm_ab 0 1250 0>;
- pwm-dutycycle-range = <100 0>;
- regulator-boot-on;
- regulator-always-on;
- };
-
- vddcpu_b: regulator-vddcpu-b {
- compatible = "pwm-regulator";
- regulator-name = "VDDCPU_B";
- regulator-min-microvolt = <690000>;
- regulator-max-microvolt = <1050000>;
- pwm-supply = <&vsys_3v3>;
- pwms = <&pwm_AO_cd 1 1250 0>;
- pwm-dutycycle-range = <100 0>;
- regulator-boot-on;
- regulator-always-on;
- };
-
- vsys_3v3: regulator-vsys-3v3 {
- compatible = "regulator-fixed";
- regulator-name = "VSYS_3V3";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- vin-supply = <&dc_in>;
- regulator-always-on;
- };
-
- emmc_1v8: regulator-emmc-1v8 {
- compatible = "regulator-fixed";
- regulator-name = "EMMC_AO1V8";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- vin-supply = <&vcc_3v3>;
- regulator-always-on;
- };
-
- usb_pwr: regulator-usb-pwr {
- compatible = "regulator-fixed";
- regulator-name = "USB_PWR";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- vin-supply = <&vcc_5v>;
-
- gpio = <&gpio GPIOA_6 GPIO_ACTIVE_HIGH>;
- enable-active-high;
- };
-
- sound {
- compatible = "amlogic,axg-sound-card";
- model = "BPI-M2S";
- audio-aux-devs = <&tdmout_b>;
- audio-routing = "TDMOUT_B IN 0", "FRDDR_A OUT 1",
- "TDMOUT_B IN 1", "FRDDR_B OUT 1",
- "TDMOUT_B IN 2", "FRDDR_C OUT 1",
- "TDM_B Playback", "TDMOUT_B OUT";
-
- assigned-clocks = <&clkc CLKID_MPLL2>,
- <&clkc CLKID_MPLL0>,
- <&clkc CLKID_MPLL1>;
- assigned-clock-parents = <0>, <0>, <0>;
- assigned-clock-rates = <294912000>,
- <270950400>,
- <393216000>;
-
- dai-link-0 {
- sound-dai = <&frddr_a>;
- };
-
- dai-link-1 {
- sound-dai = <&frddr_b>;
- };
-
- dai-link-2 {
- sound-dai = <&frddr_c>;
- };
-
- /* 8ch hdmi interface */
- dai-link-3 {
- sound-dai = <&tdmif_b>;
- dai-format = "i2s";
- dai-tdm-slot-tx-mask-0 = <1 1>;
- dai-tdm-slot-tx-mask-1 = <1 1>;
- dai-tdm-slot-tx-mask-2 = <1 1>;
- dai-tdm-slot-tx-mask-3 = <1 1>;
- mclk-fs = <256>;
-
- codec {
- sound-dai = <&tohdmitx TOHDMITX_I2S_IN_B>;
- };
- };
-
- /* hdmi glue */
- dai-link-4 {
- sound-dai = <&tohdmitx TOHDMITX_I2S_OUT>;
-
- codec {
- sound-dai = <&hdmi_tx>;
- };
- };
- };
-};
-
-&arb {
- status = "okay";
-};
-
-&clkc_audio {
- status = "okay";
-};
-
-&cecb_AO {
- pinctrl-0 = <&cec_ao_b_h_pins>;
- pinctrl-names = "default";
- status = "okay";
- hdmi-phandle = <&hdmi_tx>;
-};
-
-&cpu0 {
- cpu-supply = <&vddcpu_b>;
- operating-points-v2 = <&cpu_opp_table_0>;
- clocks = <&clkc CLKID_CPU_CLK>;
- clock-latency = <50000>;
-};
-
-&cpu1 {
- cpu-supply = <&vddcpu_b>;
- operating-points-v2 = <&cpu_opp_table_0>;
- clocks = <&clkc CLKID_CPU_CLK>;
- clock-latency = <50000>;
-};
-
-&cpu100 {
- cpu-supply = <&vddcpu_a>;
- operating-points-v2 = <&cpub_opp_table_1>;
- clocks = <&clkc CLKID_CPUB_CLK>;
- clock-latency = <50000>;
-};
-
-&cpu101 {
- cpu-supply = <&vddcpu_a>;
- operating-points-v2 = <&cpub_opp_table_1>;
- clocks = <&clkc CLKID_CPUB_CLK>;
- clock-latency = <50000>;
-};
-
-&cpu102 {
- cpu-supply = <&vddcpu_a>;
- operating-points-v2 = <&cpub_opp_table_1>;
- clocks = <&clkc CLKID_CPUB_CLK>;
- clock-latency = <50000>;
-};
-
-&cpu103 {
- cpu-supply = <&vddcpu_a>;
- operating-points-v2 = <&cpub_opp_table_1>;
- clocks = <&clkc CLKID_CPUB_CLK>;
- clock-latency = <50000>;
-};
-
-ðmac {
- pinctrl-0 = <ð_pins>, <ð_rgmii_pins>;
- pinctrl-names = "default";
- status = "okay";
- phy-mode = "rgmii";
- phy-handle = <&external_phy>;
- amlogic,tx-delay-ns = <2>;
-};
-
-&ext_mdio {
- external_phy: ethernet-phy at 0 {
- /* Realtek RTL8211F (0x001cc916) */
- reg = <0>;
- max-speed = <1000>;
-
- reset-assert-us = <10000>;
- reset-deassert-us = <80000>;
- reset-gpios = <&gpio GPIOZ_15 (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>;
-
- interrupt-parent = <&gpio_intc>;
- /* MAC_INTR on GPIOZ_14 */
- interrupts = <26 IRQ_TYPE_LEVEL_LOW>;
- };
-};
-
-&frddr_a {
- status = "okay";
-};
-
-&frddr_b {
- status = "okay";
-};
-
-&frddr_c {
- status = "okay";
-};
-
-&hdmi_tx {
- status = "okay";
- pinctrl-0 = <&hdmitx_hpd_pins>, <&hdmitx_ddc_pins>;
- pinctrl-names = "default";
- hdmi-supply = <&vcc_5v>;
-};
-
-&hdmi_tx_tmds_port {
- hdmi_tx_tmds_out: endpoint {
- remote-endpoint = <&hdmi_connector_in>;
- };
-};
-
-/* Main i2c bus */
-&i2c2 {
- status = "okay";
- pinctrl-0 = <&i2c2_sda_x_pins>, <&i2c2_sck_x_pins>;
- pinctrl-names = "default";
-};
-
-&pcie {
- status = "okay";
- reset-gpios = <&gpio GPIOA_8 GPIO_ACTIVE_LOW>;
-};
-
-&pwm_ab {
- status = "okay";
- pinctrl-0 = <&pwm_a_e_pins>;
- pinctrl-names = "default";
- clocks = <&xtal>;
- clock-names = "clkin0";
-};
-
-&pwm_cd {
- status = "okay";
- pinctrl-0 = <&pwm_d_x6_pins>;
- pinctrl-names = "default";
- pwm-gpios = <&gpio GPIOAO_10 GPIO_ACTIVE_HIGH>;
-};
-
-&pwm_ef {
- status = "okay";
- pinctrl-0 = <&pwm_e_pins>;
- pinctrl-names = "default";
-};
-
-&pwm_AO_cd {
- pinctrl-0 = <&pwm_ao_d_e_pins>;
- pinctrl-names = "default";
- clocks = <&xtal>;
- clock-names = "clkin1";
- status = "okay";
-};
-
-&saradc {
- status = "okay";
- vref-supply = <&vddao_1v8>;
-};
-
-/* SDIO */
-&sd_emmc_a {
- /* enable if WiFi/BT board connected */
- status = "disabled";
- pinctrl-0 = <&sdio_pins>;
- pinctrl-1 = <&sdio_clk_gate_pins>;
- pinctrl-names = "default", "clk-gate";
- #address-cells = <1>;
- #size-cells = <0>;
-
- bus-width = <4>;
- sd-uhs-sdr104;
- max-frequency = <50000000>;
-
- non-removable;
- disable-wp;
-
- /* WiFi firmware requires power in suspend */
- keep-power-in-suspend;
-
- mmc-pwrseq = <&sdio_pwrseq>;
-
- vmmc-supply = <&vsys_3v3>;
- vqmmc-supply = <&vddao_1v8>;
-
- rtl8822cs: wifi at 1 {
- reg = <1>;
- };
-};
-
-/* SD card */
-&sd_emmc_b {
- status = "okay";
- pinctrl-0 = <&sdcard_c_pins>;
- pinctrl-1 = <&sdcard_clk_gate_c_pins>;
- pinctrl-names = "default", "clk-gate";
-
- bus-width = <4>;
- cap-sd-highspeed;
- max-frequency = <50000000>;
- disable-wp;
-
- cd-gpios = <&gpio GPIOC_6 GPIO_ACTIVE_LOW>;
- vmmc-supply = <&vsys_3v3>;
- vqmmc-supply = <&vsys_3v3>;
-};
-
-/* eMMC */
-&sd_emmc_c {
- status = "okay";
- pinctrl-0 = <&emmc_ctrl_pins>, <&emmc_data_8b_pins>, <&emmc_ds_pins>;
- pinctrl-1 = <&emmc_clk_gate_pins>;
- pinctrl-names = "default", "clk-gate";
-
- bus-width = <8>;
- cap-mmc-highspeed;
- mmc-ddr-1_8v;
- mmc-hs200-1_8v;
- max-frequency = <200000000>;
- disable-wp;
-
- mmc-pwrseq = <&emmc_pwrseq>;
- vmmc-supply = <&vcc_3v3>;
- vqmmc-supply = <&emmc_1v8>;
-};
-
-&tdmif_b {
- status = "okay";
-};
-
-&tdmout_b {
- status = "okay";
-};
-
-&tohdmitx {
- status = "okay";
-};
-
-&uart_A {
- /* enable if WiFi/BT board connected */
- status = "disabled";
- pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>;
- pinctrl-names = "default";
- uart-has-rtscts;
-
- bluetooth {
- compatible = "realtek,rtl8822cs-bt";
- enable-gpios = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>;
- host-wake-gpios = <&gpio GPIOX_19 GPIO_ACTIVE_HIGH>;
- device-wake-gpios = <&gpio GPIOX_18 GPIO_ACTIVE_HIGH>;
- };
-};
-
-&uart_AO {
- status = "okay";
- pinctrl-0 = <&uart_ao_a_pins>;
- pinctrl-names = "default";
-};
-
-&usb2_phy0 {
- phy-supply = <&dc_in>;
-};
-
-&usb2_phy1 {
- phy-supply = <&usb_pwr>;
-};
-
-&usb3_pcie_phy {
- phy-supply = <&usb_pwr>;
-};
-
-&usb {
- status = "okay";
- dr_mode = "peripheral";
- phys = <&usb2_phy0>, <&usb2_phy1>;
- phy-names = "usb2-phy0", "usb2-phy1";
-};
diff --git a/arch/arm/dts/meson-g12b-gsking-x.dts b/arch/arm/dts/meson-g12b-gsking-x.dts
deleted file mode 100644
index 6c7bfacbad..0000000000
--- a/arch/arm/dts/meson-g12b-gsking-x.dts
+++ /dev/null
@@ -1,133 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Copyright (c) 2019 BayLibre, SAS
- * Author: Neil Armstrong <narmstrong at baylibre.com>
- * Copyright (c) 2019 Christian Hewitt <christianshewitt at gmail.com>
- */
-
-/dts-v1/;
-
-#include "meson-g12b-w400.dtsi"
-#include <dt-bindings/leds/common.h>
-#include <dt-bindings/sound/meson-g12a-tohdmitx.h>
-
-/ {
- compatible = "azw,gsking-x", "amlogic,s922x", "amlogic,g12b";
- model = "Beelink GS-King X";
-
- aliases {
- rtc0 = &rtc;
- rtc1 = &vrtc;
- };
-
- gpio-keys-polled {
- compatible = "gpio-keys-polled";
- #address-cells = <1>;
- #size-cells = <0>;
- poll-interval = <100>;
-
- power-button {
- label = "power";
- linux,code = <KEY_POWER>;
- gpios = <&gpio_ao GPIOAO_3 GPIO_ACTIVE_HIGH>;
- };
- };
-
- sound {
- compatible = "amlogic,axg-sound-card";
- model = "GSKING-X";
- audio-aux-devs = <&tdmout_a>;
- audio-routing = "TDMOUT_A IN 0", "FRDDR_A OUT 1",
- "TDMOUT_A IN 1", "FRDDR_B OUT 1",
- "TDMOUT_A IN 2", "FRDDR_C OUT 1",
- "TDM_A Playback", "TDMOUT_A OUT";
-
- assigned-clocks = <&clkc CLKID_MPLL2>,
- <&clkc CLKID_MPLL0>,
- <&clkc CLKID_MPLL1>;
- assigned-clock-parents = <0>, <0>, <0>;
- assigned-clock-rates = <294912000>,
- <270950400>,
- <393216000>;
- status = "okay";
-
- dai-link-0 {
- sound-dai = <&frddr_a>;
- };
-
- dai-link-1 {
- sound-dai = <&frddr_b>;
- };
-
- dai-link-2 {
- sound-dai = <&frddr_c>;
- };
-
- /* 8ch hdmi interface */
- dai-link-3 {
- sound-dai = <&tdmif_a>;
- dai-format = "i2s";
- dai-tdm-slot-tx-mask-0 = <1 1>;
- dai-tdm-slot-tx-mask-1 = <1 1>;
- dai-tdm-slot-tx-mask-2 = <1 1>;
- dai-tdm-slot-tx-mask-3 = <1 1>;
- mclk-fs = <256>;
-
- codec {
- sound-dai = <&tohdmitx TOHDMITX_I2S_IN_A>;
- };
- };
-
- dai-link-4 {
- sound-dai = <&tohdmitx TOHDMITX_I2S_OUT>;
-
- codec {
- sound-dai = <&hdmi_tx>;
- };
- };
- };
-};
-
-&arb {
- status = "okay";
-};
-
-&clkc_audio {
- status = "okay";
-};
-
-&frddr_a {
- status = "okay";
-};
-
-&frddr_b {
- status = "okay";
-};
-
-&frddr_c {
- status = "okay";
-};
-
-&i2c3 {
- status = "okay";
- pinctrl-0 = <&i2c3_sda_a_pins>, <&i2c3_sck_a_pins>;
- pinctrl-names = "default";
-
- rtc: rtc at 51 {
- compatible = "nxp,pcf8563";
- reg = <0x51>;
- wakeup-source;
- };
-};
-
-&tdmif_a {
- status = "okay";
-};
-
-&tdmout_a {
- status = "okay";
-};
-
-&tohdmitx {
- status = "okay";
-};
diff --git a/arch/arm/dts/meson-g12b-gtking-pro.dts b/arch/arm/dts/meson-g12b-gtking-pro.dts
deleted file mode 100644
index 707daf9278..0000000000
--- a/arch/arm/dts/meson-g12b-gtking-pro.dts
+++ /dev/null
@@ -1,142 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Copyright (c) 2019 BayLibre, SAS
- * Author: Neil Armstrong <narmstrong at baylibre.com>
- * Copyright (c) 2019 Christian Hewitt <christianshewitt at gmail.com>
- */
-
-/dts-v1/;
-
-#include "meson-g12b-w400.dtsi"
-#include <dt-bindings/sound/meson-g12a-tohdmitx.h>
-
-/ {
- compatible = "azw,gtking", "amlogic,s922x", "amlogic,g12b";
- model = "Beelink GT-King Pro";
-
- aliases {
- rtc0 = &rtc;
- rtc1 = &vrtc;
- };
-
- gpio-keys-polled {
- compatible = "gpio-keys-polled";
- #address-cells = <1>;
- #size-cells = <0>;
- poll-interval = <100>;
-
- power-button {
- label = "power";
- linux,code = <KEY_POWER>;
- gpios = <&gpio_ao GPIOAO_3 GPIO_ACTIVE_HIGH>;
- };
- };
-
- leds {
- compatible = "gpio-leds";
-
- led-white {
- label = "power:white";
- gpios = <&gpio_ao GPIOAO_11 GPIO_ACTIVE_HIGH>;
- default-state = "on";
- };
- };
-
- sound {
- compatible = "amlogic,axg-sound-card";
- model = "GTKING-PRO";
- audio-aux-devs = <&tdmout_b>;
- audio-routing = "TDMOUT_B IN 0", "FRDDR_A OUT 1",
- "TDMOUT_B IN 1", "FRDDR_B OUT 1",
- "TDMOUT_B IN 2", "FRDDR_C OUT 1",
- "TDM_B Playback", "TDMOUT_B OUT";
-
- assigned-clocks = <&clkc CLKID_MPLL2>,
- <&clkc CLKID_MPLL0>,
- <&clkc CLKID_MPLL1>;
- assigned-clock-parents = <0>, <0>, <0>;
- assigned-clock-rates = <294912000>,
- <270950400>,
- <393216000>;
- status = "okay";
-
- dai-link-0 {
- sound-dai = <&frddr_a>;
- };
-
- dai-link-1 {
- sound-dai = <&frddr_b>;
- };
-
- dai-link-2 {
- sound-dai = <&frddr_c>;
- };
-
- /* 8ch hdmi interface */
- dai-link-3 {
- sound-dai = <&tdmif_b>;
- dai-format = "i2s";
- dai-tdm-slot-tx-mask-0 = <1 1>;
- dai-tdm-slot-tx-mask-1 = <1 1>;
- dai-tdm-slot-tx-mask-2 = <1 1>;
- dai-tdm-slot-tx-mask-3 = <1 1>;
- mclk-fs = <256>;
-
- codec {
- sound-dai = <&tohdmitx TOHDMITX_I2S_IN_B>;
- };
- };
-
- dai-link-4 {
- sound-dai = <&tohdmitx TOHDMITX_I2S_OUT>;
-
- codec {
- sound-dai = <&hdmi_tx>;
- };
- };
- };
-};
-
-&arb {
- status = "okay";
-};
-
-&clkc_audio {
- status = "okay";
-};
-
-&frddr_a {
- status = "okay";
-};
-
-&frddr_b {
- status = "okay";
-};
-
-&frddr_c {
- status = "okay";
-};
-
-&i2c3 {
- status = "okay";
- pinctrl-0 = <&i2c3_sda_a_pins>, <&i2c3_sck_a_pins>;
- pinctrl-names = "default";
-
- rtc: rtc at 51 {
- compatible = "nxp,pcf8563";
- reg = <0x51>;
- wakeup-source;
- };
-};
-
-&tdmif_b {
- status = "okay";
-};
-
-&tdmout_b {
- status = "okay";
-};
-
-&tohdmitx {
- status = "okay";
-};
diff --git a/arch/arm/dts/meson-g12b-gtking.dts b/arch/arm/dts/meson-g12b-gtking.dts
deleted file mode 100644
index 5d96c14490..0000000000
--- a/arch/arm/dts/meson-g12b-gtking.dts
+++ /dev/null
@@ -1,163 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Copyright (c) 2019 BayLibre, SAS
- * Author: Neil Armstrong <narmstrong at baylibre.com>
- * Copyright (c) 2019 Christian Hewitt <christianshewitt at gmail.com>
- */
-
-/dts-v1/;
-
-#include "meson-g12b-w400.dtsi"
-#include <dt-bindings/sound/meson-g12a-tohdmitx.h>
-
-/ {
- compatible = "azw,gtking", "amlogic,s922x", "amlogic,g12b";
- model = "Beelink GT-King";
-
- aliases {
- rtc0 = &rtc;
- rtc1 = &vrtc;
- };
-
- spdif_dit: audio-codec-1 {
- #sound-dai-cells = <0>;
- compatible = "linux,spdif-dit";
- status = "okay";
- sound-name-prefix = "DIT";
- };
-
- sound {
- compatible = "amlogic,axg-sound-card";
- model = "GTKING";
- audio-aux-devs = <&tdmout_b>;
- audio-routing = "TDMOUT_B IN 0", "FRDDR_A OUT 1",
- "TDMOUT_B IN 1", "FRDDR_B OUT 1",
- "TDMOUT_B IN 2", "FRDDR_C OUT 1",
- "TDM_B Playback", "TDMOUT_B OUT",
- "SPDIFOUT IN 0", "FRDDR_A OUT 3",
- "SPDIFOUT IN 1", "FRDDR_B OUT 3",
- "SPDIFOUT IN 2", "FRDDR_C OUT 3";
-
- assigned-clocks = <&clkc CLKID_MPLL2>,
- <&clkc CLKID_MPLL0>,
- <&clkc CLKID_MPLL1>;
- assigned-clock-parents = <0>, <0>, <0>;
- assigned-clock-rates = <294912000>,
- <270950400>,
- <393216000>;
- status = "okay";
-
- dai-link-0 {
- sound-dai = <&frddr_a>;
- };
-
- dai-link-1 {
- sound-dai = <&frddr_b>;
- };
-
- dai-link-2 {
- sound-dai = <&frddr_c>;
- };
-
- /* 8ch hdmi interface */
- dai-link-3 {
- sound-dai = <&tdmif_b>;
- dai-format = "i2s";
- dai-tdm-slot-tx-mask-0 = <1 1>;
- dai-tdm-slot-tx-mask-1 = <1 1>;
- dai-tdm-slot-tx-mask-2 = <1 1>;
- dai-tdm-slot-tx-mask-3 = <1 1>;
- mclk-fs = <256>;
-
- codec {
- sound-dai = <&tohdmitx TOHDMITX_I2S_IN_B>;
- };
- };
-
- /* spdif hdmi or toslink interface */
- dai-link-4 {
- sound-dai = <&spdifout>;
-
- codec-0 {
- sound-dai = <&spdif_dit>;
- };
-
- codec-1 {
- sound-dai = <&tohdmitx TOHDMITX_SPDIF_IN_A>;
- };
- };
-
- /* spdif hdmi interface */
- dai-link-5 {
- sound-dai = <&spdifout_b>;
-
- codec {
- sound-dai = <&tohdmitx TOHDMITX_SPDIF_IN_B>;
- };
- };
-
- /* hdmi glue */
- dai-link-6 {
- sound-dai = <&tohdmitx TOHDMITX_I2S_OUT>;
-
- codec {
- sound-dai = <&hdmi_tx>;
- };
- };
- };
-};
-
-&arb {
- status = "okay";
-};
-
-&clkc_audio {
- status = "okay";
-};
-
-&frddr_a {
- status = "okay";
-};
-
-&frddr_b {
- status = "okay";
-};
-
-&frddr_c {
- status = "okay";
-};
-
-
-&i2c3 {
- status = "okay";
- pinctrl-0 = <&i2c3_sda_a_pins>, <&i2c3_sck_a_pins>;
- pinctrl-names = "default";
-
- rtc: rtc at 51 {
- compatible = "nxp,pcf8563";
- reg = <0x51>;
- wakeup-source;
- };
-};
-
-&spdifout {
- pinctrl-0 = <&spdif_out_h_pins>;
- pinctrl-names = "default";
- status = "okay";
-};
-
-&spdifout_b {
- status = "okay";
-};
-
-&tdmif_b {
- status = "okay";
-};
-
-&tdmout_b {
- status = "okay";
-};
-
-&tohdmitx {
- status = "okay";
-};
diff --git a/arch/arm/dts/meson-g12b-khadas-vim3.dtsi b/arch/arm/dts/meson-g12b-khadas-vim3.dtsi
deleted file mode 100644
index f42cf4b8af..0000000000
--- a/arch/arm/dts/meson-g12b-khadas-vim3.dtsi
+++ /dev/null
@@ -1,107 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Copyright (c) 2019 BayLibre, SAS
- * Author: Neil Armstrong <narmstrong at baylibre.com>
- * Copyright (c) 2019 Christian Hewitt <christianshewitt at gmail.com>
- */
-
-/ {
- model = "Khadas VIM3";
-
- vddcpu_a: regulator-vddcpu-a {
- /*
- * MP8756GD Regulator.
- */
- compatible = "pwm-regulator";
-
- regulator-name = "VDDCPU_A";
- regulator-min-microvolt = <690000>;
- regulator-max-microvolt = <1050000>;
-
- vin-supply = <&dc_in>;
-
- pwms = <&pwm_ab 0 1250 0>;
- pwm-dutycycle-range = <100 0>;
-
- regulator-boot-on;
- regulator-always-on;
- };
-
- vddcpu_b: regulator-vddcpu-b {
- /*
- * Silergy SY8030DEC Regulator.
- */
- compatible = "pwm-regulator";
-
- regulator-name = "VDDCPU_B";
- regulator-min-microvolt = <690000>;
- regulator-max-microvolt = <1050000>;
-
- vin-supply = <&vsys_3v3>;
-
- pwms = <&pwm_AO_cd 1 1250 0>;
- pwm-dutycycle-range = <100 0>;
-
- regulator-boot-on;
- regulator-always-on;
- };
-};
-
-&cpu0 {
- cpu-supply = <&vddcpu_b>;
- operating-points-v2 = <&cpu_opp_table_0>;
- clocks = <&clkc CLKID_CPU_CLK>;
- clock-latency = <50000>;
-};
-
-&cpu1 {
- cpu-supply = <&vddcpu_b>;
- operating-points-v2 = <&cpu_opp_table_0>;
- clocks = <&clkc CLKID_CPU_CLK>;
- clock-latency = <50000>;
-};
-
-&cpu100 {
- cpu-supply = <&vddcpu_a>;
- operating-points-v2 = <&cpub_opp_table_1>;
- clocks = <&clkc CLKID_CPUB_CLK>;
- clock-latency = <50000>;
-};
-
-&cpu101 {
- cpu-supply = <&vddcpu_a>;
- operating-points-v2 = <&cpub_opp_table_1>;
- clocks = <&clkc CLKID_CPUB_CLK>;
- clock-latency = <50000>;
-};
-
-&cpu102 {
- cpu-supply = <&vddcpu_a>;
- operating-points-v2 = <&cpub_opp_table_1>;
- clocks = <&clkc CLKID_CPUB_CLK>;
- clock-latency = <50000>;
-};
-
-&cpu103 {
- cpu-supply = <&vddcpu_a>;
- operating-points-v2 = <&cpub_opp_table_1>;
- clocks = <&clkc CLKID_CPUB_CLK>;
- clock-latency = <50000>;
-};
-
-&pwm_ab {
- pinctrl-0 = <&pwm_a_e_pins>;
- pinctrl-names = "default";
- clocks = <&xtal>;
- clock-names = "clkin0";
- status = "okay";
-};
-
-&pwm_AO_cd {
- pinctrl-0 = <&pwm_ao_d_e_pins>;
- pinctrl-names = "default";
- clocks = <&xtal>;
- clock-names = "clkin1";
- status = "okay";
-};
-
diff --git a/arch/arm/dts/meson-g12b-odroid-go-ultra.dts b/arch/arm/dts/meson-g12b-odroid-go-ultra.dts
deleted file mode 100644
index 1e40709610..0000000000
--- a/arch/arm/dts/meson-g12b-odroid-go-ultra.dts
+++ /dev/null
@@ -1,722 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Copyright (c) 2022 Neil Armstrong <neil.armstrong at linaro.org>
- */
-
-/dts-v1/;
-
-#include "meson-g12b-s922x.dtsi"
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/leds/common.h>
-#include <dt-bindings/gpio/meson-g12a-gpio.h>
-#include <dt-bindings/sound/meson-g12a-toacodec.h>
-#include <dt-bindings/sound/meson-g12a-tohdmitx.h>
-
-/ {
- compatible = "hardkernel,odroid-go-ultra", "amlogic,s922x", "amlogic,g12b";
- model = "Hardkernel ODROID-GO-Ultra";
-
- aliases {
- serial0 = &uart_AO;
- rtc0 = &vrtc;
- };
-
- adc-joystick-left {
- compatible = "adc-joystick";
- io-channels = <&saradc 2>, <&saradc 3>;
- poll-interval = <10>;
- #address-cells = <1>;
- #size-cells = <0>;
-
- axis at 0 {
- reg = <0>;
- linux,code = <ABS_Y>;
- abs-range = <3150 950>;
- abs-fuzz = <32>;
- abs-flat = <64>;
- };
- axis at 1 {
- reg = <1>;
- linux,code = <ABS_X>;
- abs-range = <700 2900>;
- abs-fuzz = <32>;
- abs-flat = <64>;
- };
- };
-
- adc-joystick-right {
- compatible = "adc-joystick";
- io-channels = <&saradc 0>, <&saradc 1>;
- poll-interval = <10>;
- #address-cells = <1>;
- #size-cells = <0>;
-
- axis at 0 {
- reg = <0>;
- linux,code = <ABS_RY>;
- abs-range = <3150 950>;
- abs-fuzz = <32>;
- abs-flat = <64>;
- };
- axis at 1 {
- reg = <1>;
- linux,code = <ABS_RX>;
- abs-range = <800 3000>;
- abs-fuzz = <32>;
- abs-flat = <64>;
- };
- };
-
- chosen {
- stdout-path = "serial0:115200n8";
- };
-
- codec_clk: codec-clk {
- compatible = "fixed-clock";
- clock-frequency = <12288000>;
- clock-output-names = "codec_clk";
- #clock-cells = <0>;
- };
-
- gpio-keys {
- compatible = "gpio-keys-polled";
- poll-interval = <10>;
- pinctrl-0 = <&keypad_gpio_pins>;
- pinctrl-names = "default";
-
- volume-up-button {
- label = "VOLUME-UP";
- linux,code = <KEY_VOLUMEUP>;
- gpios = <&gpio GPIOX_8 GPIO_ACTIVE_LOW>;
- };
- volume-down-button {
- label = "VOLUME-DOWN";
- linux,code = <KEY_VOLUMEDOWN>;
- gpios = <&gpio GPIOX_9 GPIO_ACTIVE_LOW>;
- };
- dpad-up-button {
- label = "DPAD-UP";
- linux,code = <BTN_DPAD_UP>;
- gpios = <&gpio GPIOX_0 GPIO_ACTIVE_LOW>;
- };
- dpad-down-button {
- label = "DPAD-DOWN";
- linux,code = <BTN_DPAD_DOWN>;
- gpios = <&gpio GPIOX_1 GPIO_ACTIVE_LOW>;
- };
- dpad-left-button {
- label = "DPAD-LEFT";
- linux,code = <BTN_DPAD_LEFT>;
- gpios = <&gpio GPIOX_2 GPIO_ACTIVE_LOW>;
- };
- dpad-right-button {
- label = "DPAD-RIGHT";
- linux,code = <BTN_DPAD_RIGHT>;
- gpios = <&gpio GPIOX_3 GPIO_ACTIVE_LOW>;
- };
- a-button {
- label = "A";
- linux,code = <BTN_EAST>;
- gpios = <&gpio GPIOX_4 GPIO_ACTIVE_LOW>;
- };
- b-button {
- label = "B";
- linux,code = <BTN_SOUTH>;
- gpios = <&gpio GPIOX_5 GPIO_ACTIVE_LOW>;
- };
- y-button {
- label = "Y";
- linux,code = <BTN_WEST>;
- gpios = <&gpio GPIOX_6 GPIO_ACTIVE_LOW>;
- };
- x-button {
- label = "X";
- linux,code = <BTN_NORTH>;
- gpios = <&gpio GPIOX_7 GPIO_ACTIVE_LOW>;
- };
- f1-button {
- label = "F1";
- linux,code = <BTN_TRIGGER_HAPPY1>;
- gpios = <&gpio GPIOX_17 GPIO_ACTIVE_LOW>;
- };
- f2-button {
- label = "F2";
- linux,code = <BTN_TRIGGER_HAPPY2>;
- gpios = <&gpio GPIOX_10 GPIO_ACTIVE_LOW>;
- };
- f3-button {
- label = "F3";
- linux,code = <BTN_TRIGGER_HAPPY3>;
- gpios = <&gpio GPIOX_11 GPIO_ACTIVE_LOW>;
- };
- f4-button {
- label = "F4";
- linux,code = <BTN_TRIGGER_HAPPY4>;
- gpios = <&gpio GPIOX_12 GPIO_ACTIVE_LOW>;
- };
- f5-button {
- label = "F5";
- linux,code = <BTN_TRIGGER_HAPPY5>;
- gpios = <&gpio GPIOX_13 GPIO_ACTIVE_LOW>;
- };
- f6-button {
- label = "F6";
- linux,code = <BTN_TRIGGER_HAPPY6>;
- gpios = <&gpio GPIOX_16 GPIO_ACTIVE_LOW>;
- };
- top-left-button {
- label = "TOP Left";
- linux,code = <BTN_TL>;
- gpios = <&gpio GPIOX_14 GPIO_ACTIVE_LOW>;
- };
- top-left2-button {
- label = "TOP Left 2";
- linux,code = <BTN_TL2>;
- gpios = <&gpio GPIOX_19 GPIO_ACTIVE_LOW>;
- };
- top-right-button {
- label = "TOP Right";
- linux,code = <BTN_TR>;
- gpios = <&gpio GPIOX_15 GPIO_ACTIVE_LOW>;
- };
- top-right2-button {
- label = "TOP Right 2";
- linux,code = <BTN_TR2>;
- gpios = <&gpio GPIOX_18 GPIO_ACTIVE_LOW>;
- };
- };
-
- memory at 0 {
- device_type = "memory";
- reg = <0x0 0x0 0x0 0x40000000>;
- };
-
- emmc_pwrseq: emmc-pwrseq {
- compatible = "mmc-pwrseq-emmc";
- reset-gpios = <&gpio BOOT_12 GPIO_ACTIVE_LOW>;
- };
-
- leds {
- compatible = "gpio-leds";
-
- led-blue {
- color = <LED_COLOR_ID_BLUE>;
- gpios = <&gpio_ao GPIOAO_11 GPIO_ACTIVE_HIGH>;
- linux,default-trigger = "heartbeat";
- };
- };
-
- vdd_sys: regulator-vdd-sys {
- compatible = "regulator-fixed";
- regulator-name = "VDD_SYS";
- regulator-min-microvolt = <3800000>;
- regulator-max-microvolt = <3800000>;
- regulator-always-on;
- };
-
- sound {
- compatible = "amlogic,axg-sound-card";
- model = "Odroid GO Ultra";
- audio-widgets = "Microphone", "Mic Jack",
- "Headphone", "Headphones",
- "Speaker", "Internal Speakers";
- audio-aux-devs = <&tdmout_b>, <&tdmin_b>, <&speaker_amp>;
- audio-routing = "TDMOUT_B IN 0", "FRDDR_A OUT 1",
- "TDM_B Playback", "TDMOUT_B OUT",
- "TDMIN_B IN 1", "TDM_B Capture",
- "TDMIN_B IN 4", "TDM_B Loopback",
- "TODDR_A IN 1", "TDMIN_B OUT",
- "MICL", "Mic Jack",
- "Headphones", "HPOL",
- "Headphones", "HPOR",
- "Speaker Amplifier INL", "HPOL",
- "Speaker Amplifier INR", "HPOR",
- "Internal Speakers", "Speaker Amplifier OUTL",
- "Internal Speakers", "Speaker Amplifier OUTR";
-
- assigned-clocks = <&clkc CLKID_MPLL2>,
- <&clkc CLKID_MPLL0>,
- <&clkc CLKID_MPLL1>;
- assigned-clock-parents = <0>, <0>, <0>;
- assigned-clock-rates = <294912000>,
- <270950400>,
- <393216000>;
-
- dai-link-0 {
- sound-dai = <&frddr_a>;
- };
-
- dai-link-1 {
- sound-dai = <&toddr_a>;
- };
-
- dai-link-2 {
- sound-dai = <&tdmif_b>;
- dai-format = "i2s";
- dai-tdm-slot-tx-mask-0 = <1 1>;
- mclk-fs = <256>;
-
- codec-0 {
- sound-dai = <&rk817>;
- };
- };
- };
-
- speaker_amp: speaker-amplifier {
- compatible = "simple-audio-amplifier";
- sound-name-prefix = "Speaker Amplifier";
- VCC-supply = <&hp_5v>;
- };
-};
-
-&arb {
- status = "okay";
-};
-
-&cpu0 {
- cpu-supply = <&vddcpu_b>;
- operating-points-v2 = <&cpu_opp_table_0>;
- clocks = <&clkc CLKID_CPU_CLK>;
- clock-latency = <50000>;
-};
-
-&cpu1 {
- cpu-supply = <&vddcpu_b>;
- operating-points-v2 = <&cpu_opp_table_0>;
- clocks = <&clkc CLKID_CPU_CLK>;
- clock-latency = <50000>;
-};
-
-&cpu100 {
- cpu-supply = <&vddcpu_a>;
- operating-points-v2 = <&cpub_opp_table_1>;
- clocks = <&clkc CLKID_CPUB_CLK>;
- clock-latency = <50000>;
-};
-
-&cpu101 {
- cpu-supply = <&vddcpu_a>;
- operating-points-v2 = <&cpub_opp_table_1>;
- clocks = <&clkc CLKID_CPUB_CLK>;
- clock-latency = <50000>;
-};
-
-&cpu102 {
- cpu-supply = <&vddcpu_a>;
- operating-points-v2 = <&cpub_opp_table_1>;
- clocks = <&clkc CLKID_CPUB_CLK>;
- clock-latency = <50000>;
-};
-
-&cpu103 {
- cpu-supply = <&vddcpu_a>;
- operating-points-v2 = <&cpub_opp_table_1>;
- clocks = <&clkc CLKID_CPUB_CLK>;
- clock-latency = <50000>;
-};
-
-/* RK817 only supports 12.5mV steps, round up the values */
-&cpu_opp_table_0 {
- opp-1000000000 {
- opp-microvolt = <737500>;
- };
- opp-1200000000 {
- opp-microvolt = <737500>;
- };
- opp-1398000000 {
- opp-microvolt = <762500>;
- };
- opp-1512000000 {
- opp-microvolt = <800000>;
- };
- opp-1608000000 {
- opp-microvolt = <837500>;
- };
- opp-1704000000 {
- opp-microvolt = <862500>;
- };
- opp-1896000000 {
- opp-microvolt = <987500>;
- };
- opp-1992000000 {
- opp-microvolt = <1012500>;
- };
-};
-
-/* RK818 only supports 12.5mV steps, round up the values */
-&cpub_opp_table_1 {
- opp-1000000000 {
- opp-microvolt = <775000>;
- };
- opp-1200000000 {
- opp-microvolt = <775000>;
- };
- opp-1398000000 {
- opp-microvolt = <800000>;
- };
- opp-1512000000 {
- opp-microvolt = <825000>;
- };
- opp-1608000000 {
- opp-microvolt = <862500>;
- };
- opp-1704000000 {
- opp-microvolt = <900000>;
- };
- opp-1800000000 {
- opp-microvolt = <987500>;
- };
- opp-1908000000 {
- opp-microvolt = <1025000>;
- };
-};
-
-&i2c_AO {
- status = "okay";
- pinctrl-0 = <&i2c_ao_sck_pins>, <&i2c_ao_sda_pins>;
- pinctrl-names = "default";
-
- rk818: pmic at 1c {
- compatible = "rockchip,rk818";
- reg = <0x1c>;
- interrupt-parent = <&gpio_intc>;
- interrupts = <7 IRQ_TYPE_LEVEL_LOW>; /* GPIOAO_7 */
-
- vcc1-supply = <&vdd_sys>;
- vcc2-supply = <&vdd_sys>;
- vcc3-supply = <&vdd_sys>;
- vcc4-supply = <&vdd_sys>;
- vcc6-supply = <&vdd_sys>;
- vcc7-supply = <&vcc_2v3>;
- vcc8-supply = <&vcc_2v3>;
- vcc9-supply = <&vddao_3v3>;
- boost-supply = <&vdd_sys>;
- switch-supply = <&vdd_sys>;
-
- regulators {
- vddcpu_a: DCDC_REG1 {
- regulator-name = "vddcpu_a";
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <775000>;
- regulator-max-microvolt = <1025000>;
- regulator-ramp-delay = <6001>;
- regulator-state-mem {
- regulator-on-in-suspend;
- regulator-suspend-microvolt = <775000>;
- };
- };
-
- vdd_ee: DCDC_REG2 {
- regulator-name = "vdd_ee";
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <875000>;
- regulator-max-microvolt = <1250000>;
- regulator-ramp-delay = <6001>;
- regulator-state-mem {
- regulator-on-in-suspend;
- regulator-suspend-microvolt = <875000>;
- };
- };
-
- vddq_1v1: DCDC_REG3 {
- regulator-name = "vddq_1v1";
- regulator-always-on;
- regulator-boot-on;
- regulator-state-mem {
- regulator-on-in-suspend;
- };
- };
-
- vddao_3v3: DCDC_REG4 {
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-name = "vddao_3v3";
- regulator-state-mem {
- regulator-on-in-suspend;
- regulator-suspend-microvolt = <3300000>;
- };
- };
-
- hp_5v: DCDC_BOOST {
- regulator-always-on;
- regulator-boot-on;
- regulator-name = "hp_5v";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
-
- vddio_ao1v8: LDO_REG5 {
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-name = "vddio_ao1v8";
- regulator-state-mem {
- regulator-on-in-suspend;
- regulator-suspend-microvolt = <1800000>;
- };
- };
-
- vddq_1v8: LDO_REG7 {
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-name = "vddq_1v8";
- regulator-state-mem {
- regulator-on-in-suspend;
- regulator-suspend-microvolt = <1800000>;
- };
- };
-
- vddio_c: LDO_REG9 {
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <3300000>;
- regulator-name = "vddio_c";
- regulator-state-mem {
- regulator-on-in-suspend;
- regulator-suspend-microvolt = <3300000>;
- };
- };
-
- vcc_sd: SWITCH_REG {
- regulator-name = "vcc_sd";
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-state-mem {
- regulator-on-in-suspend;
- };
- };
-
- OTG_SWITCH {
- regulator-name = "otg_switch";
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
- };
- };
-};
-
-&i2c3 {
- status = "okay";
- pinctrl-0 = <&i2c3_sda_a_pins>, <&i2c3_sck_a_pins>;
- pinctrl-names = "default";
-
- rk817: pmic at 20 {
- compatible = "rockchip,rk817";
- reg = <0x20>;
- interrupt-parent = <&gpio_intc>;
-
- interrupts = <5 IRQ_TYPE_LEVEL_LOW>; /* GPIOAO_5 */
-
- vcc1-supply = <&vdd_sys>;
- vcc2-supply = <&vdd_sys>;
- vcc3-supply = <&vdd_sys>;
- vcc4-supply = <&vdd_sys>;
- vcc5-supply = <&vdd_sys>;
- vcc6-supply = <&vdd_sys>;
- vcc7-supply = <&vdd_sys>;
- vcc8-supply = <&vdd_sys>;
- vcc9-supply = <&rk817_boost>;
-
- #sound-dai-cells = <0>;
- clocks = <&codec_clk>;
- clock-names = "mclk";
-
- #clock-cells = <1>;
-
- regulators {
- vddcpu_b: DCDC_REG2 {
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <737500>;
- regulator-max-microvolt = <1012500>;
- regulator-ramp-delay = <6001>;
- regulator-initial-mode = <0x2>;
- regulator-name = "vddcpu_b";
- regulator-state-mem {
- regulator-on-in-suspend;
- regulator-suspend-microvolt = <1000000>;
- };
- };
-
- vcc_2v3: DCDC_REG3 {
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <2300000>;
- regulator-max-microvolt = <2400000>;
- regulator-initial-mode = <0x2>;
- regulator-name = "vcc_2v3";
- regulator-state-mem {
- regulator-on-in-suspend;
- };
- };
-
- LDO_REG4 {
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-name = "vdd_codec";
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
-
- vcc_lcd: LDO_REG8 {
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-name = "vcc_lcd";
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
-
- rk817_boost: BOOST {
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5400000>;
- regulator-name = "rk817_boost";
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
-
- usb_host: OTG_SWITCH {
- regulator-name = "usb_host";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
- };
- };
-};
-
-&clkc_audio {
- status = "okay";
-};
-
-ð_phy {
- status = "disabled";
-};
-
-&frddr_a {
- status = "okay";
-};
-
-&periphs_pinctrl {
- keypad_gpio_pins: keypad-gpio {
- mux {
- groups = "GPIOX_0", "GPIOX_1", "GPIOX_2", "GPIOX_3",
- "GPIOX_4", "GPIOX_5", "GPIOX_6", "GPIOX_7",
- "GPIOX_8", "GPIOX_9", "GPIOX_10", "GPIOX_11",
- "GPIOX_12", "GPIOX_13", "GPIOX_14", "GPIOX_15",
- "GPIOX_16", "GPIOX_17", "GPIOX_18", "GPIOX_19";
- function = "gpio_periphs";
- bias-pull-up;
- output-disable;
- };
- };
-};
-
-&saradc {
- status = "okay";
- vref-supply = <&vddio_ao1v8>;
-};
-
-/* SD card */
-&sd_emmc_b {
- status = "okay";
- pinctrl-0 = <&sdcard_c_pins>;
- pinctrl-1 = <&sdcard_clk_gate_c_pins>;
- pinctrl-names = "default", "clk-gate";
-
- bus-width = <4>;
- cap-sd-highspeed;
- max-frequency = <50000000>;
- disable-wp;
-
- cd-gpios = <&gpio GPIOC_6 GPIO_ACTIVE_LOW>;
- vmmc-supply = <&vcc_sd>;
- vqmmc-supply = <&vddio_c>;
-
-};
-
-/* eMMC */
-&sd_emmc_c {
- status = "okay";
- pinctrl-0 = <&emmc_ctrl_pins>, <&emmc_data_8b_pins>, <&emmc_ds_pins>;
- pinctrl-1 = <&emmc_clk_gate_pins>;
- pinctrl-names = "default", "clk-gate";
-
- bus-width = <8>;
- cap-mmc-highspeed;
- mmc-ddr-1_8v;
- mmc-hs200-1_8v;
- max-frequency = <200000000>;
- disable-wp;
-
- mmc-pwrseq = <&emmc_pwrseq>;
- vmmc-supply = <&vcc_sd>;
- vqmmc-supply = <&vddio_ao1v8>;
-};
-
-
-&tdmif_b {
- pinctrl-0 = <&tdm_b_dout0_pins>, <&tdm_b_fs_pins>, <&tdm_b_sclk_pins>, <&tdm_b_din1_pins>;
- pinctrl-names = "default";
- status = "okay";
-
- assigned-clocks = <&clkc_audio AUD_CLKID_TDM_SCLK_PAD1>,
- <&clkc_audio AUD_CLKID_TDM_LRCLK_PAD1>;
- assigned-clock-parents = <&clkc_audio AUD_CLKID_MST_B_SCLK>,
- <&clkc_audio AUD_CLKID_MST_B_LRCLK>;
- assigned-clock-rates = <0>, <0>;
-};
-
-&tdmin_b {
- status = "okay";
-};
-
-&tdmout_b {
- status = "okay";
-};
-
-&toddr_a {
- status = "okay";
-};
-
-&uart_AO {
- status = "okay";
- pinctrl-0 = <&uart_ao_a_pins>;
- pinctrl-names = "default";
-};
-
-&usb {
- status = "okay";
- dr_mode = "peripheral";
-};
-
-&usb2_phy0 {
- status = "okay";
-};
-
-&usb2_phy1 {
- status = "okay";
- phy-supply = <&usb_host>;
-};
diff --git a/arch/arm/dts/meson-g12b-odroid-n2-plus.dts b/arch/arm/dts/meson-g12b-odroid-n2-plus.dts
deleted file mode 100644
index ce1198ad34..0000000000
--- a/arch/arm/dts/meson-g12b-odroid-n2-plus.dts
+++ /dev/null
@@ -1,31 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Copyright (c) 2019 BayLibre, SAS
- * Author: Neil Armstrong <narmstrong at baylibre.com>
- */
-
-/dts-v1/;
-
-/* The Amlogic S922X Rev. C supports the same OPPs as the A311D variant */
-#include "meson-g12b-a311d.dtsi"
-#include "meson-g12b-odroid-n2.dtsi"
-
-/ {
- compatible = "hardkernel,odroid-n2-plus", "amlogic,s922x", "amlogic,g12b";
- model = "Hardkernel ODROID-N2Plus";
-};
-
-&vddcpu_a {
- regulator-min-microvolt = <680000>;
- regulator-max-microvolt = <1040000>;
-
- pwms = <&pwm_ab 0 1500 0>;
-};
-
-&vddcpu_b {
- regulator-min-microvolt = <680000>;
- regulator-max-microvolt = <1040000>;
-
- pwms = <&pwm_AO_cd 1 1500 0>;
-};
-
diff --git a/arch/arm/dts/meson-g12b-odroid-n2.dts b/arch/arm/dts/meson-g12b-odroid-n2.dts
deleted file mode 100644
index a198a91259..0000000000
--- a/arch/arm/dts/meson-g12b-odroid-n2.dts
+++ /dev/null
@@ -1,15 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Copyright (c) 2019 BayLibre, SAS
- * Author: Neil Armstrong <narmstrong at baylibre.com>
- */
-
-/dts-v1/;
-
-#include "meson-g12b-s922x.dtsi"
-#include "meson-g12b-odroid-n2.dtsi"
-
-/ {
- compatible = "hardkernel,odroid-n2", "amlogic,s922x", "amlogic,g12b";
- model = "Hardkernel ODROID-N2";
-};
diff --git a/arch/arm/dts/meson-g12b-odroid-n2.dtsi b/arch/arm/dts/meson-g12b-odroid-n2.dtsi
deleted file mode 100644
index 24d0442dff..0000000000
--- a/arch/arm/dts/meson-g12b-odroid-n2.dtsi
+++ /dev/null
@@ -1,303 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Copyright (c) 2019 BayLibre, SAS
- * Author: Neil Armstrong <narmstrong at baylibre.com>
- */
-
-#include "meson-g12b-odroid.dtsi"
-
-/ {
- aliases {
- rtc0 = &rtc;
- };
-
- dio2133: audio-amplifier-0 {
- compatible = "simple-audio-amplifier";
- enable-gpios = <&gpio_ao GPIOAO_2 GPIO_ACTIVE_HIGH>;
- VCC-supply = <&vcc_5v>;
- sound-name-prefix = "U19";
- status = "okay";
- };
-
- hub_5v: regulator-hub_5v {
- compatible = "regulator-fixed";
- regulator-name = "HUB_5V";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- vin-supply = <&vcc_5v>;
-
- /* Connected to the Hub CHIPENABLE, LOW sets low power state */
- gpio = <&gpio GPIOH_5 GPIO_ACTIVE_HIGH>;
- enable-active-high;
- };
-
- sound {
- compatible = "amlogic,axg-sound-card";
- model = "ODROID-N2";
- audio-widgets = "Line", "Lineout";
- audio-aux-devs = <&tdmout_b>, <&tdmout_c>, <&tdmin_a>,
- <&tdmin_b>, <&tdmin_c>, <&tdmin_lb>,
- <&dio2133>;
- audio-routing = "TDMOUT_B IN 0", "FRDDR_A OUT 1",
- "TDMOUT_B IN 1", "FRDDR_B OUT 1",
- "TDMOUT_B IN 2", "FRDDR_C OUT 1",
- "TDM_B Playback", "TDMOUT_B OUT",
- "TDMOUT_C IN 0", "FRDDR_A OUT 2",
- "TDMOUT_C IN 1", "FRDDR_B OUT 2",
- "TDMOUT_C IN 2", "FRDDR_C OUT 2",
- "TDM_C Playback", "TDMOUT_C OUT",
- "TDMIN_A IN 4", "TDM_B Loopback",
- "TDMIN_B IN 4", "TDM_B Loopback",
- "TDMIN_C IN 4", "TDM_B Loopback",
- "TDMIN_LB IN 1", "TDM_B Loopback",
- "TDMIN_A IN 5", "TDM_C Loopback",
- "TDMIN_B IN 5", "TDM_C Loopback",
- "TDMIN_C IN 5", "TDM_C Loopback",
- "TDMIN_LB IN 2", "TDM_C Loopback",
- "TODDR_A IN 0", "TDMIN_A OUT",
- "TODDR_B IN 0", "TDMIN_A OUT",
- "TODDR_C IN 0", "TDMIN_A OUT",
- "TODDR_A IN 1", "TDMIN_B OUT",
- "TODDR_B IN 1", "TDMIN_B OUT",
- "TODDR_C IN 1", "TDMIN_B OUT",
- "TODDR_A IN 2", "TDMIN_C OUT",
- "TODDR_B IN 2", "TDMIN_C OUT",
- "TODDR_C IN 2", "TDMIN_C OUT",
- "TODDR_A IN 6", "TDMIN_LB OUT",
- "TODDR_B IN 6", "TDMIN_LB OUT",
- "TODDR_C IN 6", "TDMIN_LB OUT",
- "U19 INL", "ACODEC LOLP",
- "U19 INR", "ACODEC LORP",
- "Lineout", "U19 OUTL",
- "Lineout", "U19 OUTR";
-
- assigned-clocks = <&clkc CLKID_MPLL2>,
- <&clkc CLKID_MPLL0>,
- <&clkc CLKID_MPLL1>;
- assigned-clock-parents = <0>, <0>, <0>;
- assigned-clock-rates = <294912000>,
- <270950400>,
- <393216000>;
- status = "okay";
-
- dai-link-0 {
- sound-dai = <&frddr_a>;
- };
-
- dai-link-1 {
- sound-dai = <&frddr_b>;
- };
-
- dai-link-2 {
- sound-dai = <&frddr_c>;
- };
-
- dai-link-3 {
- sound-dai = <&toddr_a>;
- };
-
- dai-link-4 {
- sound-dai = <&toddr_b>;
- };
-
- dai-link-5 {
- sound-dai = <&toddr_c>;
- };
-
- /* 8ch hdmi interface */
- dai-link-6 {
- sound-dai = <&tdmif_b>;
- dai-format = "i2s";
- dai-tdm-slot-tx-mask-0 = <1 1>;
- dai-tdm-slot-tx-mask-1 = <1 1>;
- dai-tdm-slot-tx-mask-2 = <1 1>;
- dai-tdm-slot-tx-mask-3 = <1 1>;
- mclk-fs = <256>;
-
- codec-0 {
- sound-dai = <&tohdmitx TOHDMITX_I2S_IN_B>;
- };
-
- codec-1 {
- sound-dai = <&toacodec TOACODEC_IN_B>;
- };
- };
-
- /* i2s jack output interface */
- dai-link-7 {
- sound-dai = <&tdmif_c>;
- dai-format = "i2s";
- dai-tdm-slot-tx-mask-0 = <1 1>;
- mclk-fs = <256>;
-
- codec-0 {
- sound-dai = <&tohdmitx TOHDMITX_I2S_IN_C>;
- };
-
- codec-1 {
- sound-dai = <&toacodec TOACODEC_IN_C>;
- };
- };
-
- /* hdmi glue */
- dai-link-8 {
- sound-dai = <&tohdmitx TOHDMITX_I2S_OUT>;
-
- codec {
- sound-dai = <&hdmi_tx>;
- };
- };
-
- /* acodec glue */
- dai-link-9 {
- sound-dai = <&toacodec TOACODEC_OUT>;
-
- codec {
- sound-dai = <&acodec>;
- };
- };
- };
-};
-
-&acodec {
- AVDD-supply = <&vddao_1v8>;
- status = "okay";
-};
-
-ðmac {
- pinctrl-0 = <ð_pins>, <ð_rgmii_pins>;
- pinctrl-names = "default";
- status = "okay";
- phy-mode = "rgmii";
- phy-handle = <&external_phy>;
- amlogic,tx-delay-ns = <2>;
-};
-
-&ext_mdio {
- external_phy: ethernet-phy at 0 {
- /* Realtek RTL8211F (0x001cc916) */
- reg = <0>;
- max-speed = <1000>;
-
- reset-assert-us = <10000>;
- reset-deassert-us = <80000>;
- reset-gpios = <&gpio GPIOZ_15 (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>;
-
- interrupt-parent = <&gpio_intc>;
- /* MAC_INTR on GPIOZ_14 */
- interrupts = <26 IRQ_TYPE_LEVEL_LOW>;
- };
-};
-
-&gpio {
- gpio-line-names =
- /* GPIOZ */
- "", "", "", "", "", "", "", "",
- "", "", "", "", "", "", "", "",
- /* GPIOH */
- "", "", "", "", "", "", "", "",
- "",
- /* BOOT */
- "", "", "", "", "", "", "", "",
- "", "", "", "", "", "", "", "",
- /* GPIOC */
- "", "", "", "", "", "", "", "",
- /* GPIOA */
- "PIN_44", /* GPIOA_0 */
- "PIN_46", /* GPIOA_1 */
- "PIN_45", /* GPIOA_2 */
- "PIN_47", /* GPIOA_3 */
- "PIN_26", /* GPIOA_4 */
- "", "", "", "", "", "",
- "PIN_42", /* GPIOA_11 */
- "PIN_32", /* GPIOA_12 */
- "PIN_7", /* GPIOA_13 */
- "PIN_27", /* GPIOA_14 */
- "PIN_28", /* GPIOA_15 */
- /* GPIOX */
- "PIN_16", /* GPIOX_0 */
- "PIN_18", /* GPIOX_1 */
- "PIN_22", /* GPIOX_2 */
- "PIN_11", /* GPIOX_3 */
- "PIN_13", /* GPIOX_4 */
- "PIN_33", /* GPIOX_5 */
- "PIN_35", /* GPIOX_6 */
- "PIN_15", /* GPIOX_7 */
- "PIN_19", /* GPIOX_8 */
- "PIN_21", /* GPIOX_9 */
- "PIN_24", /* GPIOX_10 */
- "PIN_23", /* GPIOX_11 */
- "PIN_8", /* GPIOX_12 */
- "PIN_10", /* GPIOX_13 */
- "PIN_29", /* GPIOX_14 */
- "PIN_31", /* GPIOX_15 */
- "PIN_12", /* GPIOX_16 */
- "PIN_3", /* GPIOX_17 */
- "PIN_5", /* GPIOX_18 */
- "PIN_36"; /* GPIOX_19 */
- /*
- * WARNING: The USB Hub on the Odroid-N2 needs a reset signal
- * to be turned high in order to be detected by the USB Controller
- * This signal should be handled by a USB specific power sequence
- * in order to reset the Hub when USB bus is powered down.
- */
- hog-0 {
- gpio-hog;
- gpios = <GPIOH_4 GPIO_ACTIVE_HIGH>;
- output-high;
- line-name = "usb-hub-reset";
- };
-};
-
-&i2c3 {
- status = "okay";
- pinctrl-0 = <&i2c3_sda_a_pins>, <&i2c3_sck_a_pins>;
- pinctrl-names = "default";
-
- rtc: rtc at 51 {
- compatible = "nxp,pcf8563";
- reg = <0x51>;
- wakeup-source;
- };
-};
-
-&ir {
- status = "okay";
- pinctrl-0 = <&remote_input_ao_pins>;
- pinctrl-names = "default";
- linux,rc-map-name = "rc-odroid";
-};
-
-/*
- * EMMC_D4, EMMC_D5, EMMC_D6 and EMMC_D7 pins are shared between SPI NOR pins
- * and eMMC Data 4 to 7 pins.
- * Replace emmc_data_8b_pins to emmc_data_4b_pins from sd_emmc_c pinctrl-0,
- * and change bus-width to 4 then spifc can be enabled.
- * The SW1 slide should also be set to the correct position.
- */
-&spifc {
- status = "disabled";
- pinctrl-0 = <&nor_pins>;
- pinctrl-names = "default";
-
- mx25u64: flash at 0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "mxicy,mx25u6435f", "jedec,spi-nor";
- reg = <0>;
- spi-max-frequency = <104000000>;
- };
-};
-
-&toacodec {
- status = "okay";
-};
-
-&usb {
- vbus-supply = <&usb_pwr_en>;
-};
-
-&usb2_phy1 {
- /* Enable the hub which is connected to this port */
- phy-supply = <&hub_5v>;
-};
diff --git a/arch/arm/dts/meson-g12b-odroid-n2l.dts b/arch/arm/dts/meson-g12b-odroid-n2l.dts
deleted file mode 100644
index 70919f40d5..0000000000
--- a/arch/arm/dts/meson-g12b-odroid-n2l.dts
+++ /dev/null
@@ -1,125 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Copyright (c) 2022 Dongjin Kim <tobetter at gmail.com>
- */
-
-/dts-v1/;
-
-/* The Amlogic S922X Rev. C supports the same OPPs as the A311D variant */
-#include "meson-g12b-a311d.dtsi"
-#include "meson-g12b-odroid.dtsi"
-
-/ {
- compatible = "hardkernel,odroid-n2l", "amlogic,s922x", "amlogic,g12b";
- model = "Hardkernel ODROID-N2L";
-
- sound {
- compatible = "amlogic,axg-sound-card";
- model = "ODROID-N2L";
- audio-aux-devs = <&tdmout_b>, <&tdmin_a>, <&tdmin_b>,
- <&tdmin_c>, <&tdmin_lb>;
- audio-routing = "TDMOUT_B IN 0", "FRDDR_A OUT 1",
- "TDMOUT_B IN 1", "FRDDR_B OUT 1",
- "TDMOUT_B IN 2", "FRDDR_C OUT 1",
- "TDM_B Playback", "TDMOUT_B OUT",
- "TDMIN_A IN 4", "TDM_B Loopback",
- "TDMIN_B IN 4", "TDM_B Loopback",
- "TDMIN_C IN 4", "TDM_B Loopback",
- "TDMIN_LB IN 1", "TDM_B Loopback",
- "TODDR_A IN 0", "TDMIN_A OUT",
- "TODDR_B IN 0", "TDMIN_A OUT",
- "TODDR_C IN 0", "TDMIN_A OUT",
- "TODDR_A IN 1", "TDMIN_B OUT",
- "TODDR_B IN 1", "TDMIN_B OUT",
- "TODDR_C IN 1", "TDMIN_B OUT",
- "TODDR_A IN 2", "TDMIN_C OUT",
- "TODDR_B IN 2", "TDMIN_C OUT",
- "TODDR_C IN 2", "TDMIN_C OUT",
- "TODDR_A IN 6", "TDMIN_LB OUT",
- "TODDR_B IN 6", "TDMIN_LB OUT",
- "TODDR_C IN 6", "TDMIN_LB OUT";
-
- assigned-clocks = <&clkc CLKID_MPLL2>,
- <&clkc CLKID_MPLL0>,
- <&clkc CLKID_MPLL1>;
- assigned-clock-parents = <0>, <0>, <0>;
- assigned-clock-rates = <294912000>,
- <270950400>,
- <393216000>;
- status = "okay";
-
- dai-link-0 {
- sound-dai = <&frddr_a>;
- };
-
- dai-link-1 {
- sound-dai = <&frddr_b>;
- };
-
- dai-link-2 {
- sound-dai = <&frddr_c>;
- };
-
- dai-link-3 {
- sound-dai = <&toddr_a>;
- };
-
- dai-link-4 {
- sound-dai = <&toddr_b>;
- };
-
- dai-link-5 {
- sound-dai = <&toddr_c>;
- };
-
- /* 8ch hdmi interface */
- dai-link-6 {
- sound-dai = <&tdmif_b>;
- dai-format = "i2s";
- dai-tdm-slot-tx-mask-0 = <1 1>;
- dai-tdm-slot-tx-mask-1 = <1 1>;
- dai-tdm-slot-tx-mask-2 = <1 1>;
- dai-tdm-slot-tx-mask-3 = <1 1>;
- mclk-fs = <256>;
-
- codec {
- sound-dai = <&tohdmitx TOHDMITX_I2S_IN_B>;
- };
- };
-
- /* hdmi glue */
- dai-link-7 {
- sound-dai = <&tohdmitx TOHDMITX_I2S_OUT>;
-
- codec {
- sound-dai = <&hdmi_tx>;
- };
- };
- };
-};
-
-ð_phy {
- status = "disabled";
-};
-
-&vddcpu_a {
- regulator-min-microvolt = <680000>;
- regulator-max-microvolt = <1040000>;
-
- pwms = <&pwm_ab 0 1500 0>;
-};
-
-&vddcpu_b {
- regulator-min-microvolt = <680000>;
- regulator-max-microvolt = <1040000>;
-
- pwms = <&pwm_AO_cd 1 1500 0>;
-};
-
-&usb2_phy0 {
- phy-supply = <&usb_pwr_en>;
-};
-
-&usb2_phy1 {
- phy-supply = <&usb_pwr_en>;
-};
diff --git a/arch/arm/dts/meson-g12b-odroid.dtsi b/arch/arm/dts/meson-g12b-odroid.dtsi
deleted file mode 100644
index 9e12a34b28..0000000000
--- a/arch/arm/dts/meson-g12b-odroid.dtsi
+++ /dev/null
@@ -1,445 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Copyright (c) 2019 BayLibre, SAS
- * Author: Neil Armstrong <narmstrong at baylibre.com>
- */
-
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/gpio/meson-g12a-gpio.h>
-#include <dt-bindings/sound/meson-g12a-toacodec.h>
-#include <dt-bindings/sound/meson-g12a-tohdmitx.h>
-
-/ {
- aliases {
- serial0 = &uart_AO;
- ethernet0 = ðmac;
- rtc1 = &vrtc;
- };
-
- chosen {
- stdout-path = "serial0:115200n8";
- };
-
- memory at 0 {
- device_type = "memory";
- reg = <0x0 0x0 0x0 0x40000000>;
- };
-
- emmc_pwrseq: emmc-pwrseq {
- compatible = "mmc-pwrseq-emmc";
- reset-gpios = <&gpio BOOT_12 GPIO_ACTIVE_LOW>;
- };
-
- fan: gpio-fan {
- compatible = "gpio-fan";
- gpios = <&gpio_ao GPIOAO_10 GPIO_ACTIVE_HIGH>;
- /* Using Dummy Speed */
- gpio-fan,speed-map = <0 0>, <1 1>;
- #cooling-cells = <2>;
- };
-
- leds {
- compatible = "gpio-leds";
-
- led-blue {
- label = "n2:blue";
- gpios = <&gpio_ao GPIOAO_11 GPIO_ACTIVE_HIGH>;
- linux,default-trigger = "heartbeat";
- };
- };
-
- tflash_vdd: regulator-tflash_vdd {
- compatible = "regulator-fixed";
-
- regulator-name = "TFLASH_VDD";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
-
- gpio = <&gpio_ao GPIOAO_8 GPIO_ACTIVE_HIGH>;
- enable-active-high;
- regulator-always-on;
- };
-
- tf_io: gpio-regulator-tf_io {
- compatible = "regulator-gpio";
-
- regulator-name = "TF_IO";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <3300000>;
-
- gpios = <&gpio_ao GPIOAO_9 GPIO_ACTIVE_HIGH>;
- gpios-states = <0>;
-
- states = <3300000 0>,
- <1800000 1>;
- };
-
- flash_1v8: regulator-flash_1v8 {
- compatible = "regulator-fixed";
- regulator-name = "FLASH_1V8";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- vin-supply = <&vcc_3v3>;
- regulator-always-on;
- };
-
- main_12v: regulator-main_12v {
- compatible = "regulator-fixed";
- regulator-name = "12V";
- regulator-min-microvolt = <12000000>;
- regulator-max-microvolt = <12000000>;
- regulator-always-on;
- };
-
- usb_pwr_en: regulator-usb_pwr_en {
- compatible = "regulator-fixed";
- regulator-name = "USB_PWR_EN";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- vin-supply = <&vcc_5v>;
-
- /* Connected to the microUSB port power enable */
- gpio = <&gpio GPIOH_6 GPIO_ACTIVE_HIGH>;
- enable-active-high;
- };
-
- vcc_5v: regulator-vcc_5v {
- compatible = "regulator-fixed";
- regulator-name = "5V";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- regulator-always-on;
- vin-supply = <&main_12v>;
- gpio = <&gpio GPIOH_8 GPIO_OPEN_DRAIN>;
- enable-active-high;
- };
-
- vcc_1v8: regulator-vcc_1v8 {
- compatible = "regulator-fixed";
- regulator-name = "VCC_1V8";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- vin-supply = <&vcc_3v3>;
- regulator-always-on;
- };
-
- vcc_3v3: regulator-vcc_3v3 {
- compatible = "regulator-fixed";
- regulator-name = "VCC_3V3";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- vin-supply = <&vddao_3v3>;
- regulator-always-on;
- /* FIXME: actually controlled by VDDCPU_B_EN */
- };
-
- vddcpu_a: regulator-vddcpu-a {
- /*
- * MP8756GD Regulator.
- */
- compatible = "pwm-regulator";
-
- regulator-name = "VDDCPU_A";
- regulator-min-microvolt = <721000>;
- regulator-max-microvolt = <1022000>;
-
- pwm-supply = <&main_12v>;
-
- pwms = <&pwm_ab 0 1250 0>;
- pwm-dutycycle-range = <100 0>;
-
- regulator-boot-on;
- regulator-always-on;
- };
-
- vddcpu_b: regulator-vddcpu-b {
- /*
- * Silergy SY8120B1ABC Regulator.
- */
- compatible = "pwm-regulator";
-
- regulator-name = "VDDCPU_B";
- regulator-min-microvolt = <721000>;
- regulator-max-microvolt = <1022000>;
-
- pwm-supply = <&main_12v>;
-
- pwms = <&pwm_AO_cd 1 1250 0>;
- pwm-dutycycle-range = <100 0>;
-
- regulator-boot-on;
- regulator-always-on;
- };
-
- vddao_1v8: regulator-vddao_1v8 {
- compatible = "regulator-fixed";
- regulator-name = "VDDAO_1V8";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- vin-supply = <&vddao_3v3>;
- regulator-always-on;
- };
-
- vddao_3v3: regulator-vddao_3v3 {
- compatible = "regulator-fixed";
- regulator-name = "VDDAO_3V3";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- vin-supply = <&main_12v>;
- regulator-always-on;
- };
-
- hdmi-connector {
- compatible = "hdmi-connector";
- type = "a";
-
- port {
- hdmi_connector_in: endpoint {
- remote-endpoint = <&hdmi_tx_tmds_out>;
- };
- };
- };
-};
-
-&arb {
- status = "okay";
-};
-
-&cec_AO {
- pinctrl-0 = <&cec_ao_a_h_pins>;
- pinctrl-names = "default";
- status = "disabled";
- hdmi-phandle = <&hdmi_tx>;
-};
-
-&cecb_AO {
- pinctrl-0 = <&cec_ao_b_h_pins>;
- pinctrl-names = "default";
- status = "okay";
- hdmi-phandle = <&hdmi_tx>;
-};
-
-&clkc_audio {
- status = "okay";
-};
-
-&cpu0 {
- cpu-supply = <&vddcpu_b>;
- operating-points-v2 = <&cpu_opp_table_0>;
- clocks = <&clkc CLKID_CPU_CLK>;
- clock-latency = <50000>;
-};
-
-&cpu1 {
- cpu-supply = <&vddcpu_b>;
- operating-points-v2 = <&cpu_opp_table_0>;
- clocks = <&clkc CLKID_CPU_CLK>;
- clock-latency = <50000>;
-};
-
-&cpu100 {
- cpu-supply = <&vddcpu_a>;
- operating-points-v2 = <&cpub_opp_table_1>;
- clocks = <&clkc CLKID_CPUB_CLK>;
- clock-latency = <50000>;
-};
-
-&cpu101 {
- cpu-supply = <&vddcpu_a>;
- operating-points-v2 = <&cpub_opp_table_1>;
- clocks = <&clkc CLKID_CPUB_CLK>;
- clock-latency = <50000>;
-};
-
-&cpu102 {
- cpu-supply = <&vddcpu_a>;
- operating-points-v2 = <&cpub_opp_table_1>;
- clocks = <&clkc CLKID_CPUB_CLK>;
- clock-latency = <50000>;
-};
-
-&cpu103 {
- cpu-supply = <&vddcpu_a>;
- operating-points-v2 = <&cpub_opp_table_1>;
- clocks = <&clkc CLKID_CPUB_CLK>;
- clock-latency = <50000>;
-};
-
-&cpu_thermal {
- trips {
- cpu_active: cpu-active {
- temperature = <60000>; /* millicelsius */
- hysteresis = <2000>; /* millicelsius */
- type = "active";
- };
- };
-
- cooling-maps {
- map {
- trip = <&cpu_active>;
- cooling-device = <&fan THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
- };
- };
-};
-
-&ddr_thermal {
- trips {
- ddr_active: ddr-active {
- temperature = <60000>; /* millicelsius */
- hysteresis = <2000>; /* millicelsius */
- type = "active";
- };
- };
-
- cooling-maps {
- map {
- trip = <&ddr_active>;
- cooling-device = <&fan THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
- };
- };
-};
-
-&frddr_a {
- status = "okay";
-};
-
-&frddr_b {
- status = "okay";
-};
-
-&frddr_c {
- status = "okay";
-};
-
-&hdmi_tx {
- status = "okay";
- pinctrl-0 = <&hdmitx_hpd_pins>, <&hdmitx_ddc_pins>;
- pinctrl-names = "default";
- hdmi-supply = <&vcc_5v>;
-};
-
-&hdmi_tx_tmds_port {
- hdmi_tx_tmds_out: endpoint {
- remote-endpoint = <&hdmi_connector_in>;
- };
-};
-
-&pwm_ab {
- pinctrl-0 = <&pwm_a_e_pins>;
- pinctrl-names = "default";
- clocks = <&xtal>;
- clock-names = "clkin0";
- status = "okay";
-};
-
-&pwm_AO_cd {
- pinctrl-0 = <&pwm_ao_d_e_pins>;
- pinctrl-names = "default";
- clocks = <&xtal>;
- clock-names = "clkin1";
- status = "okay";
-};
-
-&saradc {
- status = "okay";
- vref-supply = <&vddao_1v8>;
-};
-
-/* SD card */
-&sd_emmc_b {
- status = "okay";
- pinctrl-0 = <&sdcard_c_pins>;
- pinctrl-1 = <&sdcard_clk_gate_c_pins>;
- pinctrl-names = "default", "clk-gate";
-
- bus-width = <4>;
- cap-sd-highspeed;
- max-frequency = <50000000>;
- disable-wp;
-
- cd-gpios = <&gpio GPIOC_6 GPIO_ACTIVE_LOW>;
- vmmc-supply = <&tflash_vdd>;
- vqmmc-supply = <&tf_io>;
-
-};
-
-/* eMMC */
-&sd_emmc_c {
- status = "okay";
- pinctrl-0 = <&emmc_ctrl_pins>, <&emmc_data_8b_pins>, <&emmc_ds_pins>;
- pinctrl-1 = <&emmc_clk_gate_pins>;
- pinctrl-names = "default", "clk-gate";
-
- bus-width = <8>;
- cap-mmc-highspeed;
- mmc-ddr-1_8v;
- mmc-hs200-1_8v;
- max-frequency = <200000000>;
- disable-wp;
-
- mmc-pwrseq = <&emmc_pwrseq>;
- vmmc-supply = <&vcc_3v3>;
- vqmmc-supply = <&flash_1v8>;
-};
-
-&tdmif_b {
- status = "okay";
-};
-
-&tdmif_c {
- status = "okay";
-};
-
-&tdmin_a {
- status = "okay";
-};
-
-&tdmin_b {
- status = "okay";
-};
-
-&tdmin_c {
- status = "okay";
-};
-
-&tdmin_lb {
- status = "okay";
-};
-
-&tdmout_b {
- status = "okay";
-};
-
-&tdmout_c {
- status = "okay";
-};
-
-&tohdmitx {
- status = "okay";
-};
-
-&toddr_a {
- status = "okay";
-};
-
-&toddr_b {
- status = "okay";
-};
-
-&toddr_c {
- status = "okay";
-};
-
-&uart_AO {
- status = "okay";
- pinctrl-0 = <&uart_ao_a_pins>;
- pinctrl-names = "default";
-};
-
-&usb {
- status = "okay";
-};
-
-&usb2_phy0 {
- phy-supply = <&vcc_5v>;
-};
diff --git a/arch/arm/dts/meson-g12b-radxa-zero2.dts b/arch/arm/dts/meson-g12b-radxa-zero2.dts
deleted file mode 100644
index 890f5bfebb..0000000000
--- a/arch/arm/dts/meson-g12b-radxa-zero2.dts
+++ /dev/null
@@ -1,489 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Copyright (c) 2019 BayLibre, SAS
- * Author: Neil Armstrong <narmstrong at baylibre.com>
- * Copyright (c) 2019 Christian Hewitt <christianshewitt at gmail.com>
- * Copyright (c) 2022 Radxa Limited
- * Author: Yuntian Zhang <yt at radxa.com>
- */
-
-/dts-v1/;
-
-#include "meson-g12b-a311d.dtsi"
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/leds/common.h>
-#include <dt-bindings/gpio/meson-g12a-gpio.h>
-#include <dt-bindings/sound/meson-g12a-tohdmitx.h>
-
-/ {
- compatible = "radxa,zero2", "amlogic,a311d", "amlogic,g12b";
- model = "Radxa Zero2";
-
- aliases {
- serial0 = &uart_AO;
- serial2 = &uart_A;
- };
-
- chosen {
- stdout-path = "serial0:115200n8";
- };
-
- memory at 0 {
- device_type = "memory";
- reg = <0x0 0x0 0x0 0x80000000>;
- };
-
- gpio-keys-polled {
- compatible = "gpio-keys-polled";
- poll-interval = <100>;
- power-button {
- label = "power";
- linux,code = <KEY_POWER>;
- gpios = <&gpio_ao GPIOAO_3 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>;
- };
- };
-
- leds {
- compatible = "gpio-leds";
-
- led-green {
- color = <LED_COLOR_ID_GREEN>;
- function = LED_FUNCTION_STATUS;
- gpios = <&gpio GPIOA_12 GPIO_ACTIVE_HIGH>;
- linux,default-trigger = "heartbeat";
- };
- };
-
- hdmi-connector {
- compatible = "hdmi-connector";
- type = "a";
-
- port {
- hdmi_connector_in: endpoint {
- remote-endpoint = <&hdmi_tx_tmds_out>;
- };
- };
- };
-
- emmc_pwrseq: emmc-pwrseq {
- compatible = "mmc-pwrseq-emmc";
- reset-gpios = <&gpio BOOT_12 GPIO_ACTIVE_LOW>;
- };
-
- sdio_pwrseq: sdio-pwrseq {
- compatible = "mmc-pwrseq-simple";
- reset-gpios = <&gpio GPIOX_6 GPIO_ACTIVE_LOW>;
- clocks = <&wifi32k>;
- clock-names = "ext_clock";
- };
-
- ao_5v: regulator-ao-5v {
- compatible = "regulator-fixed";
- regulator-name = "AO_5V";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- regulator-always-on;
- };
-
- vcc_1v8: regulator-vcc-1v8 {
- compatible = "regulator-fixed";
- regulator-name = "VCC_1V8";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- vin-supply = <&vcc_3v3>;
- regulator-always-on;
- };
-
- vcc_3v3: regulator-vcc-3v3 {
- compatible = "regulator-fixed";
- regulator-name = "VCC_3V3";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- vin-supply = <&vddao_3v3>;
- regulator-always-on;
- /* FIXME: actually controlled by VDDCPU_B_EN */
- };
-
- vddao_1v8: regulator-vddao-1v8 {
- compatible = "regulator-fixed";
- regulator-name = "VDDIO_AO1V8";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- vin-supply = <&vddao_3v3>;
- regulator-always-on;
- };
-
- vddao_3v3: regulator-vddao-3v3 {
- compatible = "regulator-fixed";
- regulator-name = "VDDAO_3V3";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- vin-supply = <&ao_5v>;
- regulator-always-on;
- };
-
- vddcpu_a: regulator-vddcpu-a {
- /*
- * MP8756GD Regulator.
- */
- compatible = "pwm-regulator";
-
- regulator-name = "VDDCPU_A";
- regulator-min-microvolt = <730000>;
- regulator-max-microvolt = <1022000>;
-
- pwm-supply = <&ao_5v>;
-
- pwms = <&pwm_ab 0 1250 0>;
- pwm-dutycycle-range = <100 0>;
-
- regulator-boot-on;
- regulator-always-on;
- };
-
- vddcpu_b: regulator-vddcpu-b {
- /*
- * Silergy SY8120B1ABC Regulator.
- */
- compatible = "pwm-regulator";
-
- regulator-name = "VDDCPU_B";
- regulator-min-microvolt = <730000>;
- regulator-max-microvolt = <1022000>;
-
- pwm-supply = <&ao_5v>;
-
- pwms = <&pwm_AO_cd 1 1250 0>;
- pwm-dutycycle-range = <100 0>;
-
- regulator-boot-on;
- regulator-always-on;
- };
-
- sound {
- compatible = "amlogic,axg-sound-card";
- model = "RADXA-ZERO2";
- audio-aux-devs = <&tdmout_b>;
- audio-routing = "TDMOUT_B IN 0", "FRDDR_A OUT 1",
- "TDMOUT_B IN 1", "FRDDR_B OUT 1",
- "TDMOUT_B IN 2", "FRDDR_C OUT 1",
- "TDM_B Playback", "TDMOUT_B OUT";
-
- assigned-clocks = <&clkc CLKID_MPLL2>,
- <&clkc CLKID_MPLL0>,
- <&clkc CLKID_MPLL1>;
- assigned-clock-parents = <0>, <0>, <0>;
- assigned-clock-rates = <294912000>,
- <270950400>,
- <393216000>;
-
- dai-link-0 {
- sound-dai = <&frddr_a>;
- };
-
- dai-link-1 {
- sound-dai = <&frddr_b>;
- };
-
- dai-link-2 {
- sound-dai = <&frddr_c>;
- };
-
- /* 8ch hdmi interface */
- dai-link-3 {
- sound-dai = <&tdmif_b>;
- dai-format = "i2s";
- dai-tdm-slot-tx-mask-0 = <1 1>;
- dai-tdm-slot-tx-mask-1 = <1 1>;
- dai-tdm-slot-tx-mask-2 = <1 1>;
- dai-tdm-slot-tx-mask-3 = <1 1>;
- mclk-fs = <256>;
-
- codec {
- sound-dai = <&tohdmitx TOHDMITX_I2S_IN_B>;
- };
- };
-
- /* hdmi glue */
- dai-link-4 {
- sound-dai = <&tohdmitx TOHDMITX_I2S_OUT>;
-
- codec {
- sound-dai = <&hdmi_tx>;
- };
- };
- };
-
- wifi32k: clock-0 {
- compatible = "pwm-clock";
- #clock-cells = <0>;
- clock-frequency = <32768>;
- pwms = <&pwm_ef 0 30518 0>; /* PWM_E at 32.768KHz */
- };
-};
-
-&arb {
- status = "okay";
-};
-
-&cec_AO {
- pinctrl-0 = <&cec_ao_a_h_pins>;
- pinctrl-names = "default";
- status = "disabled";
- hdmi-phandle = <&hdmi_tx>;
-};
-
-&cecb_AO {
- pinctrl-0 = <&cec_ao_b_h_pins>;
- pinctrl-names = "default";
- status = "okay";
- hdmi-phandle = <&hdmi_tx>;
-};
-
-&clkc_audio {
- status = "okay";
-};
-
-&cpu0 {
- cpu-supply = <&vddcpu_b>;
- operating-points-v2 = <&cpu_opp_table_0>;
- clocks = <&clkc CLKID_CPU_CLK>;
- clock-latency = <50000>;
-};
-
-&cpu1 {
- cpu-supply = <&vddcpu_b>;
- operating-points-v2 = <&cpu_opp_table_0>;
- clocks = <&clkc CLKID_CPU_CLK>;
- clock-latency = <50000>;
-};
-
-&cpu100 {
- cpu-supply = <&vddcpu_a>;
- operating-points-v2 = <&cpub_opp_table_1>;
- clocks = <&clkc CLKID_CPUB_CLK>;
- clock-latency = <50000>;
-};
-
-&cpu101 {
- cpu-supply = <&vddcpu_a>;
- operating-points-v2 = <&cpub_opp_table_1>;
- clocks = <&clkc CLKID_CPUB_CLK>;
- clock-latency = <50000>;
-};
-
-&cpu102 {
- cpu-supply = <&vddcpu_a>;
- operating-points-v2 = <&cpub_opp_table_1>;
- clocks = <&clkc CLKID_CPUB_CLK>;
- clock-latency = <50000>;
-};
-
-&cpu103 {
- cpu-supply = <&vddcpu_a>;
- operating-points-v2 = <&cpub_opp_table_1>;
- clocks = <&clkc CLKID_CPUB_CLK>;
- clock-latency = <50000>;
-};
-
-&frddr_a {
- status = "okay";
-};
-
-&frddr_b {
- status = "okay";
-};
-
-&frddr_c {
- status = "okay";
-};
-
-&gpio {
- gpio-line-names =
- /* GPIOZ */
- "PIN_27", "PIN_28", "PIN_7", "PIN_11", "PIN_13", "PIN_15", "PIN_18", "PIN_40",
- "", "", "", "", "", "", "", "",
- /* GPIOH */
- "", "", "", "", "PIN_19", "PIN_21", "PIN_24", "PIN_23",
- "",
- /* BOOT */
- "", "", "", "", "", "", "", "",
- "", "", "", "", "EMMC_PWRSEQ", "", "", "",
- /* GPIOC */
- "", "", "", "", "", "", "SD_CD", "PIN_36",
- /* GPIOA */
- "PIN_32", "PIN_12", "PIN_35", "", "", "PIN_38", "", "",
- "", "", "", "", "LED_GREEN", "PIN_31", "PIN_3", "PIN_5",
- /* GPIOX */
- "", "", "", "", "", "", "SDIO_PWRSEQ", "",
- "", "", "", "", "", "", "", "",
- "", "BT_SHUTDOWN", "", "";
-};
-
-&gpio_ao {
- gpio-line-names =
- /* GPIOAO */
- "PIN_8", "PIN_10", "", "BTN_POWER", "", "", "", "PIN_29",
- "PIN_33", "PIN_37", "FAN", "",
- /* GPIOE */
- "", "", "";
-};
-
-&hdmi_tx {
- status = "okay";
- pinctrl-0 = <&hdmitx_hpd_pins>, <&hdmitx_ddc_pins>;
- pinctrl-names = "default";
- hdmi-supply = <&ao_5v>;
-};
-
-&hdmi_tx_tmds_port {
- hdmi_tx_tmds_out: endpoint {
- remote-endpoint = <&hdmi_connector_in>;
- };
-};
-
-&ir {
- status = "disabled";
- pinctrl-0 = <&remote_input_ao_pins>;
- pinctrl-names = "default";
-};
-
-&pwm_ab {
- pinctrl-0 = <&pwm_a_e_pins>;
- pinctrl-names = "default";
- clocks = <&xtal>;
- clock-names = "clkin0";
- status = "okay";
-};
-
-&pwm_ef {
- pinctrl-0 = <&pwm_e_pins>;
- pinctrl-names = "default";
- clocks = <&xtal>;
- clock-names = "clkin0";
- status = "okay";
-};
-
-&pwm_AO_ab {
- pinctrl-0 = <&pwm_ao_a_pins>;
- pinctrl-names = "default";
- clocks = <&xtal>;
- clock-names = "clkin0";
- status = "okay";
-};
-
-&pwm_AO_cd {
- pinctrl-0 = <&pwm_ao_d_e_pins>;
- pinctrl-names = "default";
- clocks = <&xtal>;
- clock-names = "clkin1";
- status = "okay";
-};
-
-&saradc {
- status = "okay";
- vref-supply = <&vddao_1v8>;
-};
-
-/* SDIO */
-&sd_emmc_a {
- status = "okay";
- pinctrl-0 = <&sdio_pins>;
- pinctrl-1 = <&sdio_clk_gate_pins>;
- pinctrl-names = "default", "clk-gate";
- #address-cells = <1>;
- #size-cells = <0>;
-
- bus-width = <4>;
- cap-sd-highspeed;
- max-frequency = <100000000>;
-
- non-removable;
- disable-wp;
-
- /* WiFi firmware requires power to be kept while in suspend */
- keep-power-in-suspend;
-
- mmc-pwrseq = <&sdio_pwrseq>;
-
- vmmc-supply = <&vddao_3v3>;
- vqmmc-supply = <&vddao_1v8>;
-
- brcmf: wifi at 1 {
- reg = <1>;
- compatible = "brcm,bcm4329-fmac";
- };
-};
-
-/* SD card */
-&sd_emmc_b {
- status = "okay";
- pinctrl-0 = <&sdcard_c_pins>;
- pinctrl-1 = <&sdcard_clk_gate_c_pins>;
- pinctrl-names = "default", "clk-gate";
-
- bus-width = <4>;
- cap-sd-highspeed;
- max-frequency = <50000000>;
- disable-wp;
-
- cd-gpios = <&gpio GPIOC_6 GPIO_ACTIVE_LOW>;
- vmmc-supply = <&vddao_3v3>;
- vqmmc-supply = <&vddao_3v3>;
-};
-
-/* eMMC */
-&sd_emmc_c {
- status = "okay";
- pinctrl-0 = <&emmc_ctrl_pins>, <&emmc_data_8b_pins>, <&emmc_ds_pins>;
- pinctrl-1 = <&emmc_clk_gate_pins>;
- pinctrl-names = "default", "clk-gate";
-
- bus-width = <8>;
- cap-mmc-highspeed;
- mmc-ddr-1_8v;
- mmc-hs200-1_8v;
- max-frequency = <200000000>;
- disable-wp;
-
- mmc-pwrseq = <&emmc_pwrseq>;
- vmmc-supply = <&vcc_3v3>;
- vqmmc-supply = <&vcc_1v8>;
-};
-
-&tdmif_b {
- status = "okay";
-};
-
-&tdmout_b {
- status = "okay";
-};
-
-&tohdmitx {
- status = "okay";
-};
-
-&uart_A {
- status = "okay";
- pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>;
- pinctrl-names = "default";
- uart-has-rtscts;
-
- bluetooth {
- compatible = "brcm,bcm43438-bt";
- shutdown-gpios = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>;
- max-speed = <2000000>;
- clocks = <&wifi32k>;
- clock-names = "lpo";
- };
-};
-
-&uart_AO {
- status = "okay";
- pinctrl-0 = <&uart_ao_a_pins>;
- pinctrl-names = "default";
-};
-
-&usb {
- status = "okay";
-};
diff --git a/arch/arm/dts/meson-g12b-s922x-bananapi-m2s.dts b/arch/arm/dts/meson-g12b-s922x-bananapi-m2s.dts
deleted file mode 100644
index 7f66f263a2..0000000000
--- a/arch/arm/dts/meson-g12b-s922x-bananapi-m2s.dts
+++ /dev/null
@@ -1,14 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Copyright (c) 2023 Christian Hewitt <christianshewitt at gmail.com>
- */
-
-/dts-v1/;
-
-#include "meson-g12b-s922x.dtsi"
-#include "meson-g12b-bananapi.dtsi"
-
-/ {
- compatible = "bananapi,bpi-m2s", "amlogic,s922x", "amlogic,g12b";
- model = "BananaPi M2S";
-};
diff --git a/arch/arm/dts/meson-g12b-s922x.dtsi b/arch/arm/dts/meson-g12b-s922x.dtsi
deleted file mode 100644
index 1e5d0ee5d5..0000000000
--- a/arch/arm/dts/meson-g12b-s922x.dtsi
+++ /dev/null
@@ -1,139 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Copyright (c) 2019 BayLibre, SAS
- * Author: Neil Armstrong <narmstrong at baylibre.com>
- */
-
-#include "meson-g12b.dtsi"
-
-/ {
- cpu_opp_table_0: opp-table-0 {
- compatible = "operating-points-v2";
- opp-shared;
-
- opp-100000000 {
- opp-hz = /bits/ 64 <100000000>;
- opp-microvolt = <731000>;
- };
-
- opp-250000000 {
- opp-hz = /bits/ 64 <250000000>;
- opp-microvolt = <731000>;
- };
-
- opp-500000000 {
- opp-hz = /bits/ 64 <500000000>;
- opp-microvolt = <731000>;
- };
-
- opp-667000000 {
- opp-hz = /bits/ 64 <667000000>;
- opp-microvolt = <731000>;
- };
-
- opp-1000000000 {
- opp-hz = /bits/ 64 <1000000000>;
- opp-microvolt = <731000>;
- };
-
- opp-1200000000 {
- opp-hz = /bits/ 64 <1200000000>;
- opp-microvolt = <731000>;
- };
-
- opp-1398000000 {
- opp-hz = /bits/ 64 <1398000000>;
- opp-microvolt = <761000>;
- };
-
- opp-1512000000 {
- opp-hz = /bits/ 64 <1512000000>;
- opp-microvolt = <791000>;
- };
-
- opp-1608000000 {
- opp-hz = /bits/ 64 <1608000000>;
- opp-microvolt = <831000>;
- };
-
- opp-1704000000 {
- opp-hz = /bits/ 64 <1704000000>;
- opp-microvolt = <861000>;
- };
-
- opp-1896000000 {
- opp-hz = /bits/ 64 <1896000000>;
- opp-microvolt = <981000>;
- };
-
- opp-1992000000 {
- opp-hz = /bits/ 64 <1992000000>;
- opp-microvolt = <1001000>;
- };
- };
-
- cpub_opp_table_1: opp-table-1 {
- compatible = "operating-points-v2";
- opp-shared;
-
- opp-100000000 {
- opp-hz = /bits/ 64 <100000000>;
- opp-microvolt = <751000>;
- };
-
- opp-250000000 {
- opp-hz = /bits/ 64 <250000000>;
- opp-microvolt = <751000>;
- };
-
- opp-500000000 {
- opp-hz = /bits/ 64 <500000000>;
- opp-microvolt = <751000>;
- };
-
- opp-667000000 {
- opp-hz = /bits/ 64 <667000000>;
- opp-microvolt = <751000>;
- };
-
- opp-1000000000 {
- opp-hz = /bits/ 64 <1000000000>;
- opp-microvolt = <771000>;
- };
-
- opp-1200000000 {
- opp-hz = /bits/ 64 <1200000000>;
- opp-microvolt = <771000>;
- };
-
- opp-1398000000 {
- opp-hz = /bits/ 64 <1398000000>;
- opp-microvolt = <791000>;
- };
-
- opp-1512000000 {
- opp-hz = /bits/ 64 <1512000000>;
- opp-microvolt = <821000>;
- };
-
- opp-1608000000 {
- opp-hz = /bits/ 64 <1608000000>;
- opp-microvolt = <861000>;
- };
-
- opp-1704000000 {
- opp-hz = /bits/ 64 <1704000000>;
- opp-microvolt = <891000>;
- };
-
- opp-1800000000 {
- opp-hz = /bits/ 64 <1800000000>;
- opp-microvolt = <981000>;
- };
-
- opp-1908000000 {
- opp-hz = /bits/ 64 <1908000000>;
- opp-microvolt = <1022000>;
- };
- };
-};
diff --git a/arch/arm/dts/meson-g12b-w400.dtsi b/arch/arm/dts/meson-g12b-w400.dtsi
deleted file mode 100644
index feb0885047..0000000000
--- a/arch/arm/dts/meson-g12b-w400.dtsi
+++ /dev/null
@@ -1,425 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Copyright (c) 2019 BayLibre, SAS
- * Author: Neil Armstrong <narmstrong at baylibre.com>
- * Copyright (c) 2019 Christian Hewitt <christianshewitt at gmail.com>
- */
-
-/dts-v1/;
-
-#include "meson-g12b.dtsi"
-#include "meson-g12b-s922x.dtsi"
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/gpio/meson-g12a-gpio.h>
-
-/ {
- aliases {
- serial0 = &uart_AO;
- ethernet0 = ðmac;
- };
-
- chosen {
- stdout-path = "serial0:115200n8";
- };
-
- memory at 0 {
- device_type = "memory";
- reg = <0x0 0x0 0x0 0x40000000>;
- };
-
- emmc_pwrseq: emmc-pwrseq {
- compatible = "mmc-pwrseq-emmc";
- reset-gpios = <&gpio BOOT_12 GPIO_ACTIVE_LOW>;
- };
-
- sdio_pwrseq: sdio-pwrseq {
- compatible = "mmc-pwrseq-simple";
- reset-gpios = <&gpio GPIOX_6 GPIO_ACTIVE_LOW>;
- clocks = <&wifi32k>;
- clock-names = "ext_clock";
- };
-
- flash_1v8: regulator-flash_1v8 {
- compatible = "regulator-fixed";
- regulator-name = "FLASH_1V8";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- vin-supply = <&vcc_3v3>;
- regulator-always-on;
- };
-
- main_12v: regulator-main_12v {
- compatible = "regulator-fixed";
- regulator-name = "12V";
- regulator-min-microvolt = <12000000>;
- regulator-max-microvolt = <12000000>;
- regulator-always-on;
- };
-
- vcc_5v: regulator-vcc_5v {
- compatible = "regulator-fixed";
- regulator-name = "VCC_5V";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- vin-supply = <&main_12v>;
-
- gpio = <&gpio GPIOH_8 GPIO_OPEN_DRAIN>;
- enable-active-high;
- };
-
- vcc_1v8: regulator-vcc_1v8 {
- compatible = "regulator-fixed";
- regulator-name = "VCC_1V8";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- vin-supply = <&vcc_3v3>;
- regulator-always-on;
- };
-
- vcc_3v3: regulator-vcc_3v3 {
- compatible = "regulator-fixed";
- regulator-name = "VCC_3V3";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- vin-supply = <&vddao_3v3>;
- regulator-always-on;
- /* FIXME: actually controlled by VDDCPU_B_EN */
- };
-
- vddcpu_a: regulator-vddcpu-a {
- /*
- * MP1653 Regulator.
- */
- compatible = "pwm-regulator";
-
- regulator-name = "VDDCPU_A";
- regulator-min-microvolt = <721000>;
- regulator-max-microvolt = <1022000>;
-
- vin-supply = <&main_12v>;
-
- pwms = <&pwm_ab 0 1250 0>;
- pwm-dutycycle-range = <100 0>;
-
- regulator-boot-on;
- regulator-always-on;
- };
-
- vddcpu_b: regulator-vddcpu-b {
- /*
- * MP1652 Regulator.
- */
- compatible = "pwm-regulator";
-
- regulator-name = "VDDCPU_B";
- regulator-min-microvolt = <721000>;
- regulator-max-microvolt = <1022000>;
-
- vin-supply = <&main_12v>;
-
- pwms = <&pwm_AO_cd 1 1250 0>;
- pwm-dutycycle-range = <100 0>;
-
- regulator-boot-on;
- regulator-always-on;
- };
-
- usb1_pow: regulator-usb1-pow {
- compatible = "regulator-fixed";
- regulator-name = "USB1_POW";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- vin-supply = <&vcc_5v>;
-
- /* connected to SY6280A Power Switch */
- gpio = <&gpio GPIOA_8 GPIO_ACTIVE_HIGH>;
- enable-active-high;
- };
-
- usb_pwr_en: regulator-usb-pwr-en {
- compatible = "regulator-fixed";
- regulator-name = "USB_PWR_EN";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- vin-supply = <&vcc_5v>;
-
- /* Connected to USB3 Type-A Port power enable */
- gpio = <&gpio GPIOAO_7 GPIO_ACTIVE_HIGH>;
- enable-active-high;
- };
-
- vddao_1v8: regulator-vddao-1v8 {
- compatible = "regulator-fixed";
- regulator-name = "VDDAO_1V8";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- vin-supply = <&vddao_3v3>;
- regulator-always-on;
- };
-
- vddao_3v3: regulator-vddao-3v3 {
- compatible = "regulator-fixed";
- regulator-name = "VDDAO_3V3";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- vin-supply = <&main_12v>;
- regulator-always-on;
- };
-
- cvbs-connector {
- compatible = "composite-video-connector";
-
- port {
- cvbs_connector_in: endpoint {
- remote-endpoint = <&cvbs_vdac_out>;
- };
- };
- };
-
- hdmi-connector {
- compatible = "hdmi-connector";
- type = "a";
-
- port {
- hdmi_connector_in: endpoint {
- remote-endpoint = <&hdmi_tx_tmds_out>;
- };
- };
- };
-
- wifi32k: wifi32k {
- compatible = "pwm-clock";
- #clock-cells = <0>;
- clock-frequency = <32768>;
- pwms = <&pwm_ef 0 30518 0>; /* PWM_E at 32.768KHz */
- };
-};
-
-&cec_AO {
- pinctrl-0 = <&cec_ao_a_h_pins>;
- pinctrl-names = "default";
- status = "disabled";
- hdmi-phandle = <&hdmi_tx>;
-};
-
-&cecb_AO {
- pinctrl-0 = <&cec_ao_b_h_pins>;
- pinctrl-names = "default";
- status = "okay";
- hdmi-phandle = <&hdmi_tx>;
-};
-
-&cpu0 {
- cpu-supply = <&vddcpu_b>;
- operating-points-v2 = <&cpu_opp_table_0>;
- clocks = <&clkc CLKID_CPU_CLK>;
- clock-latency = <50000>;
-};
-
-&cpu1 {
- cpu-supply = <&vddcpu_b>;
- operating-points-v2 = <&cpu_opp_table_0>;
- clocks = <&clkc CLKID_CPU_CLK>;
- clock-latency = <50000>;
-};
-
-&cpu100 {
- cpu-supply = <&vddcpu_a>;
- operating-points-v2 = <&cpub_opp_table_1>;
- clocks = <&clkc CLKID_CPUB_CLK>;
- clock-latency = <50000>;
-};
-
-&cpu101 {
- cpu-supply = <&vddcpu_a>;
- operating-points-v2 = <&cpub_opp_table_1>;
- clocks = <&clkc CLKID_CPUB_CLK>;
- clock-latency = <50000>;
-};
-
-&cpu102 {
- cpu-supply = <&vddcpu_a>;
- operating-points-v2 = <&cpub_opp_table_1>;
- clocks = <&clkc CLKID_CPUB_CLK>;
- clock-latency = <50000>;
-};
-
-&cpu103 {
- cpu-supply = <&vddcpu_a>;
- operating-points-v2 = <&cpub_opp_table_1>;
- clocks = <&clkc CLKID_CPUB_CLK>;
- clock-latency = <50000>;
-};
-
-&cvbs_vdac_port {
- cvbs_vdac_out: endpoint {
- remote-endpoint = <&cvbs_connector_in>;
- };
-};
-
-&ext_mdio {
- external_phy: ethernet-phy at 0 {
- /* Realtek RTL8211F (0x001cc916) */
- reg = <0>;
- max-speed = <1000>;
-
- reset-assert-us = <10000>;
- reset-deassert-us = <80000>;
- reset-gpios = <&gpio GPIOZ_15 (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>;
-
- interrupt-parent = <&gpio_intc>;
- /* MAC_INTR on GPIOZ_14 */
- interrupts = <26 IRQ_TYPE_LEVEL_LOW>;
- };
-};
-
-ðmac {
- pinctrl-0 = <ð_pins>, <ð_rgmii_pins>;
- pinctrl-names = "default";
- status = "okay";
- phy-mode = "rgmii";
- phy-handle = <&external_phy>;
- amlogic,tx-delay-ns = <2>;
-};
-
-&hdmi_tx {
- status = "okay";
- pinctrl-0 = <&hdmitx_hpd_pins>, <&hdmitx_ddc_pins>;
- pinctrl-names = "default";
- hdmi-supply = <&vcc_5v>;
-};
-
-&hdmi_tx_tmds_port {
- hdmi_tx_tmds_out: endpoint {
- remote-endpoint = <&hdmi_connector_in>;
- };
-};
-
-&ir {
- status = "okay";
- pinctrl-0 = <&remote_input_ao_pins>;
- pinctrl-names = "default";
-};
-
-&pwm_ab {
- pinctrl-0 = <&pwm_a_e_pins>;
- pinctrl-names = "default";
- clocks = <&xtal>;
- clock-names = "clkin0";
- status = "okay";
-};
-
-&pwm_AO_cd {
- pinctrl-0 = <&pwm_ao_d_e_pins>;
- pinctrl-names = "default";
- clocks = <&xtal>;
- clock-names = "clkin1";
- status = "okay";
-};
-
-&pwm_ef {
- pinctrl-0 = <&pwm_e_pins>;
- pinctrl-names = "default";
- clocks = <&xtal>;
- clock-names = "clkin0";
- status = "okay";
-};
-
-/* SDIO */
-&sd_emmc_a {
- status = "okay";
- pinctrl-0 = <&sdio_pins>;
- pinctrl-1 = <&sdio_clk_gate_pins>;
- pinctrl-names = "default", "clk-gate";
- #address-cells = <1>;
- #size-cells = <0>;
-
- bus-width = <4>;
- cap-sd-highspeed;
- max-frequency = <100000000>;
-
- /* WiFi firmware requires power to be kept while in suspend */
- keep-power-in-suspend;
-
- non-removable;
- disable-wp;
-
- mmc-pwrseq = <&sdio_pwrseq>;
-
- vmmc-supply = <&vddao_3v3>;
- vqmmc-supply = <&vddao_1v8>;
-
- brcmf: wifi at 1 {
- reg = <1>;
- compatible = "brcm,bcm4329-fmac";
- };
-};
-
-/* SD card */
-&sd_emmc_b {
- status = "okay";
- pinctrl-0 = <&sdcard_c_pins>;
- pinctrl-1 = <&sdcard_clk_gate_c_pins>;
- pinctrl-names = "default", "clk-gate";
-
- bus-width = <4>;
- cap-sd-highspeed;
- max-frequency = <50000000>;
- disable-wp;
-
- cd-gpios = <&gpio GPIOC_6 GPIO_ACTIVE_LOW>;
- vmmc-supply = <&vddao_3v3>;
- vqmmc-supply = <&vddao_3v3>;
-};
-
-/* eMMC */
-&sd_emmc_c {
- status = "okay";
- pinctrl-0 = <&emmc_ctrl_pins>, <&emmc_data_8b_pins>, <&emmc_ds_pins>;
- pinctrl-1 = <&emmc_clk_gate_pins>;
- pinctrl-names = "default", "clk-gate";
-
- bus-width = <8>;
- cap-mmc-highspeed;
- max-frequency = <100000000>;
- disable-wp;
-
- mmc-pwrseq = <&emmc_pwrseq>;
- vmmc-supply = <&vcc_3v3>;
- vqmmc-supply = <&flash_1v8>;
-};
-
-&uart_A {
- status = "okay";
- pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>;
- pinctrl-names = "default";
- uart-has-rtscts;
-
- bluetooth {
- compatible = "brcm,bcm43438-bt";
- shutdown-gpios = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>;
- max-speed = <2000000>;
- clocks = <&wifi32k>;
- clock-names = "lpo";
- };
-};
-
-&uart_AO {
- status = "okay";
- pinctrl-0 = <&uart_ao_a_pins>;
- pinctrl-names = "default";
-};
-
-&usb {
- status = "okay";
- dr_mode = "host";
- vbus-supply = <&usb_pwr_en>;
-};
-
-&usb2_phy0 {
- phy-supply = <&usb1_pow>;
-};
-
-&usb2_phy1 {
- phy-supply = <&usb1_pow>;
-};
diff --git a/arch/arm/dts/meson-g12b.dtsi b/arch/arm/dts/meson-g12b.dtsi
deleted file mode 100644
index 75ff00fb2e..0000000000
--- a/arch/arm/dts/meson-g12b.dtsi
+++ /dev/null
@@ -1,146 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Copyright (c) 2019 BayLibre, SAS
- * Author: Neil Armstrong <narmstrong at baylibre.com>
- */
-
-#include "meson-g12.dtsi"
-
-/ {
- compatible = "amlogic,g12b";
-
- cpus {
- #address-cells = <0x2>;
- #size-cells = <0x0>;
-
- cpu-map {
- cluster0 {
- core0 {
- cpu = <&cpu0>;
- };
-
- core1 {
- cpu = <&cpu1>;
- };
- };
-
- cluster1 {
- core0 {
- cpu = <&cpu100>;
- };
-
- core1 {
- cpu = <&cpu101>;
- };
-
- core2 {
- cpu = <&cpu102>;
- };
-
- core3 {
- cpu = <&cpu103>;
- };
- };
- };
-
- cpu0: cpu at 0 {
- device_type = "cpu";
- compatible = "arm,cortex-a53";
- reg = <0x0 0x0>;
- enable-method = "psci";
- capacity-dmips-mhz = <592>;
- next-level-cache = <&l2>;
- #cooling-cells = <2>;
- };
-
- cpu1: cpu at 1 {
- device_type = "cpu";
- compatible = "arm,cortex-a53";
- reg = <0x0 0x1>;
- enable-method = "psci";
- capacity-dmips-mhz = <592>;
- next-level-cache = <&l2>;
- #cooling-cells = <2>;
- };
-
- cpu100: cpu at 100 {
- device_type = "cpu";
- compatible = "arm,cortex-a73";
- reg = <0x0 0x100>;
- enable-method = "psci";
- capacity-dmips-mhz = <1024>;
- next-level-cache = <&l2>;
- #cooling-cells = <2>;
- };
-
- cpu101: cpu at 101 {
- device_type = "cpu";
- compatible = "arm,cortex-a73";
- reg = <0x0 0x101>;
- enable-method = "psci";
- capacity-dmips-mhz = <1024>;
- next-level-cache = <&l2>;
- #cooling-cells = <2>;
- };
-
- cpu102: cpu at 102 {
- device_type = "cpu";
- compatible = "arm,cortex-a73";
- reg = <0x0 0x102>;
- enable-method = "psci";
- capacity-dmips-mhz = <1024>;
- next-level-cache = <&l2>;
- #cooling-cells = <2>;
- };
-
- cpu103: cpu at 103 {
- device_type = "cpu";
- compatible = "arm,cortex-a73";
- reg = <0x0 0x103>;
- enable-method = "psci";
- capacity-dmips-mhz = <1024>;
- next-level-cache = <&l2>;
- #cooling-cells = <2>;
- };
-
- l2: l2-cache0 {
- compatible = "cache";
- cache-level = <2>;
- };
- };
-};
-
-&clkc {
- compatible = "amlogic,g12b-clkc";
-};
-
-&cpu_thermal {
- cooling-maps {
- map0 {
- trip = <&cpu_passive>;
- cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
- <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
- <&cpu100 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
- <&cpu101 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
- <&cpu102 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
- <&cpu103 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
- };
- map1 {
- trip = <&cpu_hot>;
- cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
- <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
- <&cpu100 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
- <&cpu101 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
- <&cpu102 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
- <&cpu103 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
- };
- };
-};
-
-&mali {
- dma-coherent;
-};
-
-&pmu {
- compatible = "amlogic,g12b-ddr-pmu";
-};
diff --git a/arch/arm/dts/meson-khadas-vim3.dtsi b/arch/arm/dts/meson-khadas-vim3.dtsi
deleted file mode 100644
index 3cf4ecb6d5..0000000000
--- a/arch/arm/dts/meson-khadas-vim3.dtsi
+++ /dev/null
@@ -1,534 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Copyright (c) 2019 BayLibre, SAS
- * Author: Neil Armstrong <narmstrong at baylibre.com>
- * Copyright (c) 2019 Christian Hewitt <christianshewitt at gmail.com>
- */
-
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/leds/common.h>
-#include <dt-bindings/gpio/meson-g12a-gpio.h>
-#include <dt-bindings/sound/meson-g12a-tohdmitx.h>
-
-/ {
- aliases {
- serial0 = &uart_AO;
- ethernet0 = ðmac;
- rtc0 = &rtc;
- rtc1 = &vrtc;
- };
-
- chosen {
- stdout-path = "serial0:115200n8";
- };
-
- memory at 0 {
- device_type = "memory";
- reg = <0x0 0x0 0x0 0x80000000>;
- };
-
- adc-keys {
- compatible = "adc-keys";
- io-channels = <&saradc 2>;
- io-channel-names = "buttons";
- keyup-threshold-microvolt = <1710000>;
-
- button-function {
- label = "Function";
- linux,code = <KEY_FN>;
- press-threshold-microvolt = <10000>;
- };
- };
-
- leds {
- compatible = "gpio-leds";
-
- led-white {
- color = <LED_COLOR_ID_WHITE>;
- function = LED_FUNCTION_STATUS;
- gpios = <&gpio_ao GPIOAO_4 GPIO_ACTIVE_HIGH>;
- linux,default-trigger = "heartbeat";
- };
-
- led-red {
- color = <LED_COLOR_ID_RED>;
- function = LED_FUNCTION_STATUS;
- gpios = <&gpio_expander 5 GPIO_ACTIVE_HIGH>;
- };
- };
-
- emmc_pwrseq: emmc-pwrseq {
- compatible = "mmc-pwrseq-emmc";
- reset-gpios = <&gpio BOOT_12 GPIO_ACTIVE_LOW>;
- };
-
- gpio-keys-polled {
- compatible = "gpio-keys-polled";
- poll-interval = <100>;
-
- power-button {
- label = "power";
- linux,code = <KEY_POWER>;
- gpios = <&gpio_ao GPIOAO_7 GPIO_ACTIVE_LOW>;
- };
- };
-
- sdio_pwrseq: sdio-pwrseq {
- compatible = "mmc-pwrseq-simple";
- reset-gpios = <&gpio GPIOX_6 GPIO_ACTIVE_LOW>;
- clocks = <&wifi32k>;
- clock-names = "ext_clock";
- };
-
- dc_in: regulator-dc_in {
- compatible = "regulator-fixed";
- regulator-name = "DC_IN";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- regulator-always-on;
- };
-
- vcc_5v: regulator-vcc_5v {
- compatible = "regulator-fixed";
- regulator-name = "VCC_5V";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- vin-supply = <&dc_in>;
-
- gpio = <&gpio GPIOH_8 GPIO_OPEN_DRAIN>;
- enable-active-high;
- };
-
- vcc_1v8: regulator-vcc_1v8 {
- compatible = "regulator-fixed";
- regulator-name = "VCC_1V8";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- vin-supply = <&vcc_3v3>;
- regulator-always-on;
- };
-
- vcc_3v3: regulator-vcc_3v3 {
- compatible = "regulator-fixed";
- regulator-name = "VCC_3V3";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- vin-supply = <&vsys_3v3>;
- regulator-always-on;
- /* FIXME: actually controlled by VDDCPU_B_EN */
- };
-
- vddao_1v8: regulator-vddao_1v8 {
- compatible = "regulator-fixed";
- regulator-name = "VDDIO_AO1V8";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- vin-supply = <&vsys_3v3>;
- regulator-always-on;
- };
-
- emmc_1v8: regulator-emmc_1v8 {
- compatible = "regulator-fixed";
- regulator-name = "EMMC_AO1V8";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- vin-supply = <&vcc_3v3>;
- regulator-always-on;
- };
-
- vsys_3v3: regulator-vsys_3v3 {
- compatible = "regulator-fixed";
- regulator-name = "VSYS_3V3";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- vin-supply = <&dc_in>;
- regulator-always-on;
- };
-
- usb_pwr: regulator-usb_pwr {
- compatible = "regulator-fixed";
- regulator-name = "USB_PWR";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- vin-supply = <&vcc_5v>;
-
- gpio = <&gpio GPIOA_6 GPIO_ACTIVE_HIGH>;
- enable-active-high;
- };
-
- hdmi-connector {
- compatible = "hdmi-connector";
- type = "a";
-
- port {
- hdmi_connector_in: endpoint {
- remote-endpoint = <&hdmi_tx_tmds_out>;
- };
- };
- };
-
-
- sound {
- compatible = "amlogic,axg-sound-card";
- model = "KHADAS-VIM3";
- audio-aux-devs = <&tdmin_a>, <&tdmout_a>;
- audio-routing = "TDMOUT_A IN 0", "FRDDR_A OUT 0",
- "TDMOUT_A IN 1", "FRDDR_B OUT 0",
- "TDMOUT_A IN 2", "FRDDR_C OUT 0",
- "TDM_A Playback", "TDMOUT_A OUT",
- "TDMIN_A IN 0", "TDM_A Capture",
- "TDMIN_A IN 3", "TDM_A Loopback",
- "TODDR_A IN 0", "TDMIN_A OUT",
- "TODDR_B IN 0", "TDMIN_A OUT",
- "TODDR_C IN 0", "TDMIN_A OUT";
-
- assigned-clocks = <&clkc CLKID_MPLL2>,
- <&clkc CLKID_MPLL0>,
- <&clkc CLKID_MPLL1>;
- assigned-clock-parents = <0>, <0>, <0>;
- assigned-clock-rates = <294912000>,
- <270950400>,
- <393216000>;
- status = "okay";
-
- dai-link-0 {
- sound-dai = <&frddr_a>;
- };
-
- dai-link-1 {
- sound-dai = <&frddr_b>;
- };
-
- dai-link-2 {
- sound-dai = <&frddr_c>;
- };
-
- dai-link-3 {
- sound-dai = <&toddr_a>;
- };
-
- dai-link-4 {
- sound-dai = <&toddr_b>;
- };
-
- dai-link-5 {
- sound-dai = <&toddr_c>;
- };
-
- /* 8ch hdmi interface */
- dai-link-6 {
- sound-dai = <&tdmif_a>;
- dai-format = "i2s";
- dai-tdm-slot-tx-mask-0 = <1 1>;
- dai-tdm-slot-tx-mask-1 = <1 1>;
- dai-tdm-slot-tx-mask-2 = <1 1>;
- dai-tdm-slot-tx-mask-3 = <1 1>;
- mclk-fs = <256>;
-
- codec {
- sound-dai = <&tohdmitx TOHDMITX_I2S_IN_A>;
- };
- };
-
- /* hdmi glue */
- dai-link-7 {
- sound-dai = <&tohdmitx TOHDMITX_I2S_OUT>;
-
- codec {
- sound-dai = <&hdmi_tx>;
- };
- };
- };
-
- wifi32k: wifi32k {
- compatible = "pwm-clock";
- #clock-cells = <0>;
- clock-frequency = <32768>;
- pwms = <&pwm_ef 0 30518 0>; /* PWM_E at 32.768KHz */
- };
-};
-
-&arb {
- status = "okay";
-};
-
-&clkc_audio {
- status = "okay";
-};
-
-&cec_AO {
- pinctrl-0 = <&cec_ao_a_h_pins>;
- pinctrl-names = "default";
- status = "disabled";
- hdmi-phandle = <&hdmi_tx>;
-};
-
-&cecb_AO {
- pinctrl-0 = <&cec_ao_b_h_pins>;
- pinctrl-names = "default";
- status = "okay";
- hdmi-phandle = <&hdmi_tx>;
-};
-
-&cpu_thermal {
- trips {
- cpu_active: cpu-active {
- temperature = <80000>; /* millicelsius */
- hysteresis = <2000>; /* millicelsius */
- type = "active";
- };
- };
-
- cooling-maps {
- map {
- trip = <&cpu_active>;
- cooling-device = <&khadas_mcu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
- };
- };
-};
-
-&ext_mdio {
- external_phy: ethernet-phy at 0 {
- /* Realtek RTL8211F (0x001cc916) */
- reg = <0>;
- max-speed = <1000>;
-
- interrupt-parent = <&gpio_intc>;
- /* MAC_INTR on GPIOZ_14 */
- interrupts = <26 IRQ_TYPE_LEVEL_LOW>;
- };
-};
-
-ðmac {
- pinctrl-0 = <ð_pins>, <ð_rgmii_pins>;
- pinctrl-names = "default";
- status = "okay";
- phy-mode = "rgmii";
- phy-handle = <&external_phy>;
- amlogic,tx-delay-ns = <2>;
-};
-
-&frddr_a {
- status = "okay";
-};
-
-&frddr_b {
- status = "okay";
-};
-
-&frddr_c {
- status = "okay";
-};
-
-&hdmi_tx {
- status = "okay";
- pinctrl-0 = <&hdmitx_hpd_pins>, <&hdmitx_ddc_pins>;
- pinctrl-names = "default";
- hdmi-supply = <&vcc_5v>;
-};
-
-&hdmi_tx_tmds_port {
- hdmi_tx_tmds_out: endpoint {
- remote-endpoint = <&hdmi_connector_in>;
- };
-};
-
-&i2c_AO {
- status = "okay";
- pinctrl-0 = <&i2c_ao_sck_pins>, <&i2c_ao_sda_pins>;
- pinctrl-names = "default";
-
- khadas_mcu: system-controller at 18 {
- compatible = "khadas,mcu";
- reg = <0x18>;
- #cooling-cells = <2>;
- };
-
- gpio_expander: gpio-controller at 20 {
- compatible = "ti,tca6408";
- reg = <0x20>;
- vcc-supply = <&vcc_3v3>;
- gpio-controller;
- #gpio-cells = <2>;
- };
-
- rtc: rtc at 51 {
- compatible = "haoyu,hym8563";
- reg = <0x51>;
- #clock-cells = <0>;
- };
-};
-
-&ir {
- status = "okay";
- pinctrl-0 = <&remote_input_ao_pins>;
- pinctrl-names = "default";
- linux,rc-map-name = "rc-khadas";
-};
-
-&pcie {
- reset-gpios = <&gpio GPIOA_8 GPIO_ACTIVE_LOW>;
-};
-
-&pwm_ef {
- status = "okay";
- pinctrl-0 = <&pwm_e_pins>;
- pinctrl-names = "default";
-};
-
-&saradc {
- status = "okay";
- vref-supply = <&vddao_1v8>;
-};
-
-/* SDIO */
-&sd_emmc_a {
- status = "okay";
- pinctrl-0 = <&sdio_pins>;
- pinctrl-1 = <&sdio_clk_gate_pins>;
- pinctrl-names = "default", "clk-gate";
- #address-cells = <1>;
- #size-cells = <0>;
-
- bus-width = <4>;
- cap-sd-highspeed;
- max-frequency = <100000000>;
-
- non-removable;
- disable-wp;
-
- /* WiFi firmware requires power to be kept while in suspend */
- keep-power-in-suspend;
-
- mmc-pwrseq = <&sdio_pwrseq>;
-
- vmmc-supply = <&vsys_3v3>;
- vqmmc-supply = <&vddao_1v8>;
-
- brcmf: wifi at 1 {
- reg = <1>;
- compatible = "brcm,bcm4329-fmac";
- };
-};
-
-/* SD card */
-&sd_emmc_b {
- status = "okay";
- pinctrl-0 = <&sdcard_c_pins>;
- pinctrl-1 = <&sdcard_clk_gate_c_pins>;
- pinctrl-names = "default", "clk-gate";
-
- bus-width = <4>;
- cap-sd-highspeed;
- max-frequency = <50000000>;
- disable-wp;
-
- cd-gpios = <&gpio GPIOC_6 GPIO_ACTIVE_LOW>;
- vmmc-supply = <&vsys_3v3>;
- vqmmc-supply = <&vsys_3v3>;
-};
-
-/* eMMC */
-&sd_emmc_c {
- status = "okay";
- pinctrl-0 = <&emmc_ctrl_pins>, <&emmc_data_8b_pins>, <&emmc_ds_pins>;
- pinctrl-1 = <&emmc_clk_gate_pins>;
- pinctrl-names = "default", "clk-gate";
-
- bus-width = <8>;
- cap-mmc-highspeed;
- mmc-ddr-1_8v;
- mmc-hs200-1_8v;
- max-frequency = <200000000>;
- disable-wp;
-
- mmc-pwrseq = <&emmc_pwrseq>;
- vmmc-supply = <&vcc_3v3>;
- vqmmc-supply = <&emmc_1v8>;
-};
-
-/*
- * EMMC_D4, EMMC_D5, EMMC_D6 and EMMC_D7 pins are shared between SPI NOR CS
- * and eMMC Data 4 to 7 pins.
- * Replace emmc_data_8b_pins to emmc_data_4b_pins from sd_emmc_c pinctrl-0,
- * and change bus-width to 4 then spifc can be enabled.
- */
-&spifc {
- status = "disabled";
- pinctrl-0 = <&nor_pins>;
- pinctrl-names = "default";
-
- w25q128: spi-flash at 0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "winbond,w25q128fw", "jedec,spi-nor";
- reg = <0>;
- spi-max-frequency = <104000000>;
- };
-};
-
-&tdmif_a {
- status = "okay";
-};
-
-&tdmin_a {
- status = "okay";
-};
-
-&tdmout_a {
- status = "okay";
-};
-
-&toddr_a {
- status = "okay";
-};
-
-&toddr_b {
- status = "okay";
-};
-
-&toddr_c {
- status = "okay";
-};
-
-&tohdmitx {
- status = "okay";
-};
-
-&uart_A {
- status = "okay";
- pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>;
- pinctrl-names = "default";
- uart-has-rtscts;
-
- bluetooth {
- compatible = "brcm,bcm43438-bt";
- shutdown-gpios = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>;
- max-speed = <2000000>;
- clocks = <&wifi32k>;
- clock-names = "lpo";
- };
-};
-
-&uart_AO {
- status = "okay";
- pinctrl-0 = <&uart_ao_a_pins>;
- pinctrl-names = "default";
-};
-
-&usb2_phy0 {
- phy-supply = <&dc_in>;
-};
-
-&usb2_phy1 {
- phy-supply = <&usb_pwr>;
-};
-
-&usb3_pcie_phy {
- phy-supply = <&usb_pwr>;
-};
-
-&usb {
- status = "okay";
- dr_mode = "peripheral";
-};
diff --git a/arch/arm/dts/meson-sm1-bananapi-m2-pro.dts b/arch/arm/dts/meson-sm1-bananapi-m2-pro.dts
deleted file mode 100644
index 586034316e..0000000000
--- a/arch/arm/dts/meson-sm1-bananapi-m2-pro.dts
+++ /dev/null
@@ -1,97 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Copyright (c) 2021 BayLibre SAS
- * Author: Neil Armstrong <narmstrong at baylibre.com>
- */
-
-/dts-v1/;
-
-#include "meson-sm1-bananapi.dtsi"
-#include <dt-bindings/sound/meson-g12a-tohdmitx.h>
-
-/ {
- compatible = "bananapi,bpi-m2-pro", "amlogic,sm1";
- model = "Banana Pi BPI-M2-PRO";
-
- sound {
- compatible = "amlogic,axg-sound-card";
- model = "BPI-M2-PRO";
- audio-aux-devs = <&tdmout_b>;
- audio-routing = "TDMOUT_B IN 0", "FRDDR_A OUT 1",
- "TDMOUT_B IN 1", "FRDDR_B OUT 1",
- "TDMOUT_B IN 2", "FRDDR_C OUT 1",
- "TDM_B Playback", "TDMOUT_B OUT";
-
- assigned-clocks = <&clkc CLKID_MPLL2>,
- <&clkc CLKID_MPLL0>,
- <&clkc CLKID_MPLL1>;
- assigned-clock-parents = <0>, <0>, <0>;
- assigned-clock-rates = <294912000>,
- <270950400>,
- <393216000>;
-
- dai-link-0 {
- sound-dai = <&frddr_a>;
- };
-
- dai-link-1 {
- sound-dai = <&frddr_b>;
- };
-
- dai-link-2 {
- sound-dai = <&frddr_c>;
- };
-
- /* 8ch hdmi interface */
- dai-link-3 {
- sound-dai = <&tdmif_b>;
- dai-format = "i2s";
- dai-tdm-slot-tx-mask-0 = <1 1>;
- dai-tdm-slot-tx-mask-1 = <1 1>;
- dai-tdm-slot-tx-mask-2 = <1 1>;
- dai-tdm-slot-tx-mask-3 = <1 1>;
- mclk-fs = <256>;
-
- codec {
- sound-dai = <&tohdmitx TOHDMITX_I2S_IN_B>;
- };
- };
-
- /* hdmi glue */
- dai-link-4 {
- sound-dai = <&tohdmitx TOHDMITX_I2S_OUT>;
-
- codec {
- sound-dai = <&hdmi_tx>;
- };
- };
- };
-};
-
-&clkc_audio {
- status = "okay";
-};
-
-&frddr_a {
- status = "okay";
-};
-
-&frddr_b {
- status = "okay";
-};
-
-&frddr_c {
- status = "okay";
-};
-
-&tdmif_b {
- status = "okay";
-};
-
-&tdmout_b {
- status = "okay";
-};
-
-&tohdmitx {
- status = "okay";
-};
diff --git a/arch/arm/dts/meson-sm1-bananapi-m5.dts b/arch/arm/dts/meson-sm1-bananapi-m5.dts
deleted file mode 100644
index f045bf8516..0000000000
--- a/arch/arm/dts/meson-sm1-bananapi-m5.dts
+++ /dev/null
@@ -1,221 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Copyright (c) 2021 BayLibre SAS
- * Author: Neil Armstrong <narmstrong at baylibre.com>
- */
-
-/dts-v1/;
-
-#include "meson-sm1-bananapi.dtsi"
-#include <dt-bindings/sound/meson-g12a-toacodec.h>
-#include <dt-bindings/sound/meson-g12a-tohdmitx.h>
-
-/ {
- compatible = "bananapi,bpi-m5", "amlogic,sm1";
- model = "Banana Pi BPI-M5";
-
- /* TOFIX: handle CVBS_DET on SARADC channel 0 */
- cvbs-connector {
- compatible = "composite-video-connector";
-
- port {
- cvbs_connector_in: endpoint {
- remote-endpoint = <&cvbs_vdac_out>;
- };
- };
- };
-
- sound {
- compatible = "amlogic,axg-sound-card";
- model = "BPI-M5";
- audio-widgets = "Line", "Lineout";
- audio-aux-devs = <&tdmout_b>, <&tdmout_c>,
- <&tdmin_a>, <&tdmin_b>, <&tdmin_c>;
- audio-routing = "TDMOUT_B IN 0", "FRDDR_A OUT 1",
- "TDMOUT_B IN 1", "FRDDR_B OUT 1",
- "TDMOUT_B IN 2", "FRDDR_C OUT 1",
- "TDM_B Playback", "TDMOUT_B OUT",
- "TDMOUT_C IN 0", "FRDDR_A OUT 2",
- "TDMOUT_C IN 1", "FRDDR_B OUT 2",
- "TDMOUT_C IN 2", "FRDDR_C OUT 2",
- "TDM_C Playback", "TDMOUT_C OUT",
- "TDMIN_A IN 4", "TDM_B Loopback",
- "TDMIN_B IN 4", "TDM_B Loopback",
- "TDMIN_C IN 4", "TDM_B Loopback",
- "TDMIN_A IN 5", "TDM_C Loopback",
- "TDMIN_B IN 5", "TDM_C Loopback",
- "TDMIN_C IN 5", "TDM_C Loopback",
- "TODDR_A IN 0", "TDMIN_A OUT",
- "TODDR_B IN 0", "TDMIN_A OUT",
- "TODDR_C IN 0", "TDMIN_A OUT",
- "TODDR_A IN 1", "TDMIN_B OUT",
- "TODDR_B IN 1", "TDMIN_B OUT",
- "TODDR_C IN 1", "TDMIN_B OUT",
- "TODDR_A IN 2", "TDMIN_C OUT",
- "TODDR_B IN 2", "TDMIN_C OUT",
- "TODDR_C IN 2", "TDMIN_C OUT",
- "Lineout", "ACODEC LOLP",
- "Lineout", "ACODEC LORP";
-
- assigned-clocks = <&clkc CLKID_MPLL2>,
- <&clkc CLKID_MPLL0>,
- <&clkc CLKID_MPLL1>;
- assigned-clock-parents = <0>, <0>, <0>;
- assigned-clock-rates = <294912000>,
- <270950400>,
- <393216000>;
-
- dai-link-0 {
- sound-dai = <&frddr_a>;
- };
-
- dai-link-1 {
- sound-dai = <&frddr_b>;
- };
-
- dai-link-2 {
- sound-dai = <&frddr_c>;
- };
-
- dai-link-3 {
- sound-dai = <&toddr_a>;
- };
-
- dai-link-4 {
- sound-dai = <&toddr_b>;
- };
-
- dai-link-5 {
- sound-dai = <&toddr_c>;
- };
-
- /* 8ch hdmi interface */
- dai-link-6 {
- sound-dai = <&tdmif_b>;
- dai-format = "i2s";
- dai-tdm-slot-tx-mask-0 = <1 1>;
- dai-tdm-slot-tx-mask-1 = <1 1>;
- dai-tdm-slot-tx-mask-2 = <1 1>;
- dai-tdm-slot-tx-mask-3 = <1 1>;
- mclk-fs = <256>;
-
- codec-0 {
- sound-dai = <&tohdmitx TOHDMITX_I2S_IN_B>;
- };
-
- codec-1 {
- sound-dai = <&toacodec TOACODEC_IN_B>;
- };
- };
-
- /* i2s jack output interface */
- dai-link-7 {
- sound-dai = <&tdmif_c>;
- dai-format = "i2s";
- dai-tdm-slot-tx-mask-0 = <1 1>;
- mclk-fs = <256>;
-
- codec-0 {
- sound-dai = <&tohdmitx TOHDMITX_I2S_IN_C>;
- };
-
- codec-1 {
- sound-dai = <&toacodec TOACODEC_IN_C>;
- };
- };
-
- /* hdmi glue */
- dai-link-8 {
- sound-dai = <&tohdmitx TOHDMITX_I2S_OUT>;
-
- codec {
- sound-dai = <&hdmi_tx>;
- };
- };
-
- /* acodec glue */
- dai-link-9 {
- sound-dai = <&toacodec TOACODEC_OUT>;
-
- codec {
- sound-dai = <&acodec>;
- };
- };
- };
-};
-
-&acodec {
- AVDD-supply = <&vddao_1v8>;
- status = "okay";
-};
-
-
-&clkc_audio {
- status = "okay";
-};
-
-&cvbs_vdac_port {
- cvbs_vdac_out: endpoint {
- remote-endpoint = <&cvbs_connector_in>;
- };
-};
-
-&frddr_a {
- status = "okay";
-};
-
-&frddr_b {
- status = "okay";
-};
-
-&frddr_c {
- status = "okay";
-};
-
-&tdmif_b {
- status = "okay";
-};
-
-&tdmif_c {
- status = "okay";
-};
-
-&tdmin_a {
- status = "okay";
-};
-
-&tdmin_b {
- status = "okay";
-};
-
-&tdmin_c {
- status = "okay";
-};
-
-&tdmout_b {
- status = "okay";
-};
-
-&tdmout_c {
- status = "okay";
-};
-
-&toacodec {
- status = "okay";
-};
-
-&tohdmitx {
- status = "okay";
-};
-
-&toddr_a {
- status = "okay";
-};
-
-&toddr_b {
- status = "okay";
-};
-
-&toddr_c {
- status = "okay";
-};
diff --git a/arch/arm/dts/meson-sm1-bananapi.dtsi b/arch/arm/dts/meson-sm1-bananapi.dtsi
deleted file mode 100644
index 17045ff81c..0000000000
--- a/arch/arm/dts/meson-sm1-bananapi.dtsi
+++ /dev/null
@@ -1,435 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Copyright (c) 2021 BayLibre SAS
- * Author: Neil Armstrong <narmstrong at baylibre.com>
- */
-
-#include "meson-sm1.dtsi"
-#include <dt-bindings/leds/common.h>
-#include <dt-bindings/input/linux-event-codes.h>
-#include <dt-bindings/gpio/meson-g12a-gpio.h>
-
-/ {
- adc-keys {
- compatible = "adc-keys";
- io-channels = <&saradc 2>;
- io-channel-names = "buttons";
- keyup-threshold-microvolt = <1800000>;
-
- button-sw3 {
- label = "SW3";
- linux,code = <BTN_3>;
- press-threshold-microvolt = <1700000>;
- };
- };
-
- aliases {
- serial0 = &uart_AO;
- ethernet0 = ðmac;
- };
-
- chosen {
- stdout-path = "serial0:115200n8";
- };
-
- emmc_pwrseq: emmc-pwrseq {
- compatible = "mmc-pwrseq-emmc";
- reset-gpios = <&gpio BOOT_12 GPIO_ACTIVE_LOW>;
- };
-
- gpio-keys {
- compatible = "gpio-keys";
-
- key {
- label = "SW1";
- linux,code = <BTN_1>;
- gpios = <&gpio_ao GPIOAO_3 GPIO_ACTIVE_LOW>;
- interrupt-parent = <&gpio_intc>;
- interrupts = <3 IRQ_TYPE_EDGE_BOTH>;
- };
- };
-
- hdmi-connector {
- compatible = "hdmi-connector";
- type = "a";
-
- port {
- hdmi_connector_in: endpoint {
- remote-endpoint = <&hdmi_tx_tmds_out>;
- };
- };
- };
-
- leds {
- compatible = "gpio-leds";
-
- led-green {
- color = <LED_COLOR_ID_GREEN>;
- function = LED_FUNCTION_STATUS;
- gpios = <&gpio_ao GPIOAO_2 GPIO_ACTIVE_LOW>;
- };
-
- led-blue {
- color = <LED_COLOR_ID_BLUE>;
- function = LED_FUNCTION_STATUS;
- gpios = <&gpio_ao GPIOAO_11 GPIO_ACTIVE_LOW>;
- linux,default-trigger = "heartbeat";
- };
- };
-
- memory at 0 {
- device_type = "memory";
- reg = <0x0 0x0 0x0 0x40000000>;
- };
-
- emmc_1v8: regulator-emmc_1v8 {
- compatible = "regulator-fixed";
- regulator-name = "EMMC_1V8";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- vin-supply = <&vddao_3v3>;
- regulator-always-on;
- };
-
- dc_in: regulator-dc_in {
- compatible = "regulator-fixed";
- regulator-name = "DC_IN";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- regulator-always-on;
- };
-
- vddio_c: regulator-vddio_c {
- compatible = "regulator-gpio";
- regulator-name = "VDDIO_C";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <3300000>;
-
- enable-gpios = <&gpio_ao GPIOE_2 GPIO_OPEN_DRAIN>;
- enable-active-high;
- regulator-always-on;
-
- gpios = <&gpio_ao GPIOAO_6 GPIO_OPEN_DRAIN>;
- gpios-states = <1>;
-
- states = <1800000 0>,
- <3300000 1>;
- };
-
- tflash_vdd: regulator-tflash_vdd {
- compatible = "regulator-fixed";
- regulator-name = "TFLASH_VDD";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- vin-supply = <&dc_in>;
- gpio = <&gpio GPIOH_8 GPIO_OPEN_DRAIN>;
- enable-active-high;
- regulator-always-on;
- };
-
- vddao_1v8: regulator-vddao_1v8 {
- compatible = "regulator-fixed";
- regulator-name = "VDDAO_1V8";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- vin-supply = <&vddao_3v3>;
- regulator-always-on;
- };
-
- vddao_3v3: regulator-vddao_3v3 {
- compatible = "regulator-fixed";
- regulator-name = "VDDAO_3V3";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- vin-supply = <&dc_in>;
- regulator-always-on;
- };
-
- vddcpu: regulator-vddcpu {
- /*
- * SY8120B1ABC DC/DC Regulator.
- */
- compatible = "pwm-regulator";
-
- regulator-name = "VDDCPU";
- regulator-min-microvolt = <690000>;
- regulator-max-microvolt = <1050000>;
-
- pwm-supply = <&dc_in>;
-
- pwms = <&pwm_AO_cd 1 1250 0>;
- pwm-dutycycle-range = <100 0>;
-
- regulator-boot-on;
- regulator-always-on;
- };
-
- /* USB Hub Power Enable */
- vl_pwr_en: regulator-vl_pwr_en {
- compatible = "regulator-fixed";
- regulator-name = "VL_PWR_EN";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- vin-supply = <&dc_in>;
-
- gpio = <&gpio GPIOH_6 GPIO_ACTIVE_HIGH>;
- enable-active-high;
- };
-};
-
-&arb {
- status = "okay";
-};
-
-&cpu0 {
- cpu-supply = <&vddcpu>;
- operating-points-v2 = <&cpu_opp_table>;
- clocks = <&clkc CLKID_CPU_CLK>;
- clock-latency = <50000>;
-};
-
-&cpu1 {
- cpu-supply = <&vddcpu>;
- operating-points-v2 = <&cpu_opp_table>;
- clocks = <&clkc CLKID_CPU1_CLK>;
- clock-latency = <50000>;
-};
-
-&cpu2 {
- cpu-supply = <&vddcpu>;
- operating-points-v2 = <&cpu_opp_table>;
- clocks = <&clkc CLKID_CPU2_CLK>;
- clock-latency = <50000>;
-};
-
-&cpu3 {
- cpu-supply = <&vddcpu>;
- operating-points-v2 = <&cpu_opp_table>;
- clocks = <&clkc CLKID_CPU3_CLK>;
- clock-latency = <50000>;
-};
-
-&ext_mdio {
- external_phy: ethernet-phy at 0 {
- /* Realtek RTL8211F (0x001cc916) */
- reg = <0>;
- max-speed = <1000>;
-
- interrupt-parent = <&gpio_intc>;
- /* MAC_INTR on GPIOZ_14 */
- interrupts = <26 IRQ_TYPE_LEVEL_LOW>;
- };
-};
-
-ðmac {
- pinctrl-0 = <ð_pins>, <ð_rgmii_pins>;
- pinctrl-names = "default";
- status = "okay";
- phy-mode = "rgmii-txid";
- phy-handle = <&external_phy>;
-};
-
-&gpio {
- gpio-line-names =
- /* GPIOZ */
- "ETH_MDIO", /* GPIOZ_0 */
- "ETH_MDC", /* GPIOZ_1 */
- "ETH_RXCLK", /* GPIOZ_2 */
- "ETH_RX_DV", /* GPIOZ_3 */
- "ETH_RXD0", /* GPIOZ_4 */
- "ETH_RXD1", /* GPIOZ_5 */
- "ETH_RXD2", /* GPIOZ_6 */
- "ETH_RXD3", /* GPIOZ_7 */
- "ETH_TXCLK", /* GPIOZ_8 */
- "ETH_TXEN", /* GPIOZ_9 */
- "ETH_TXD0", /* GPIOZ_10 */
- "ETH_TXD1", /* GPIOZ_11 */
- "ETH_TXD2", /* GPIOZ_12 */
- "ETH_TXD3", /* GPIOZ_13 */
- "ETH_INTR", /* GPIOZ_14 */
- "ETH_NRST", /* GPIOZ_15 */
- /* GPIOH */
- "HDMI_SDA", /* GPIOH_0 */
- "HDMI_SCL", /* GPIOH_1 */
- "HDMI_HPD", /* GPIOH_2 */
- "HDMI_CEC", /* GPIOH_3 */
- "VL-RST_N", /* GPIOH_4 */
- "CON1-P36", /* GPIOH_5 */
- "VL-PWREN", /* GPIOH_6 */
- "WiFi_3V3_1V8", /* GPIOH_7 */
- "TFLASH_VDD_EN", /* GPIOH_8 */
- /* BOOT */
- "eMMC_D0", /* BOOT_0 */
- "eMMC_D1", /* BOOT_1 */
- "eMMC_D2", /* BOOT_2 */
- "eMMC_D3", /* BOOT_3 */
- "eMMC_D4", /* BOOT_4 */
- "eMMC_D5", /* BOOT_5 */
- "eMMC_D6", /* BOOT_6 */
- "eMMC_D7", /* BOOT_7 */
- "eMMC_CLK", /* BOOT_8 */
- "",
- "eMMC_CMD", /* BOOT_10 */
- "",
- "eMMC_RST#", /* BOOT_12 */
- "eMMC_DS", /* BOOT_13 */
- "", "",
- /* GPIOC */
- "SD_D0_B", /* GPIOC_0 */
- "SD_D1_B", /* GPIOC_1 */
- "SD_D2_B", /* GPIOC_2 */
- "SD_D3_B", /* GPIOC_3 */
- "SD_CLK_B", /* GPIOC_4 */
- "SD_CMD_B", /* GPIOC_5 */
- "CARD_EN_DET", /* GPIOC_6 */
- "",
- /* GPIOA */
- "", "", "", "", "", "", "", "",
- "", "", "", "", "", "",
- "CON1-P27", /* GPIOA_14 */
- "CON1-P28", /* GPIOA_15 */
- /* GPIOX */
- "CON1-P16", /* GPIOX_0 */
- "CON1-P18", /* GPIOX_1 */
- "CON1-P22", /* GPIOX_2 */
- "CON1-P11", /* GPIOX_3 */
- "CON1-P13", /* GPIOX_4 */
- "CON1-P07", /* GPIOX_5 */
- "CON1-P33", /* GPIOX_6 */
- "CON1-P15", /* GPIOX_7 */
- "CON1-P19", /* GPIOX_8 */
- "CON1-P21", /* GPIOX_9 */
- "CON1-P24", /* GPIOX_10 */
- "CON1-P23", /* GPIOX_11 */
- "CON1-P08", /* GPIOX_12 */
- "CON1-P10", /* GPIOX_13 */
- "CON1-P29", /* GPIOX_14 */
- "CON1-P31", /* GPIOX_15 */
- "CON1-P26", /* GPIOX_16 */
- "CON1-P03", /* GPIOX_17 */
- "CON1-P05", /* GPIOX_18 */
- "CON1-P32"; /* GPIOX_19 */
-
- /*
- * WARNING: The USB Hub needs a reset signal to be turned high in
- * order to be detected by the USB Controller. This signal should
- * be handled by a USB specific power sequence to reset the Hub
- * when the USB bus is powered down.
- */
- usb-hub-hog {
- gpio-hog;
- gpios = <GPIOH_4 GPIO_ACTIVE_HIGH>;
- output-high;
- line-name = "usb-hub-reset";
- };
-};
-
-&gpio_ao {
- gpio-line-names =
- /* GPIOAO */
- "DEBUG TX", /* GPIOAO_0 */
- "DEBUG RX", /* GPIOAO_1 */
- "SYS_LED2", /* GPIOAO_2 */
- "UPDATE_KEY", /* GPIOAO_3 */
- "CON1-P40", /* GPIOAO_4 */
- "IR_IN", /* GPIOAO_5 */
- "TF_3V3N_1V8_EN", /* GPIOAO_6 */
- "CON1-P35", /* GPIOAO_7 */
- "CON1-P12", /* GPIOAO_8 */
- "CON1-P37", /* GPIOAO_9 */
- "CON1-P38", /* GPIOAO_10 */
- "SYS_LED", /* GPIOAO_11 */
- /* GPIOE */
- "VDDEE_PWM", /* GPIOE_0 */
- "VDDCPU_PWM", /* GPIOE_1 */
- "TF_PWR_EN"; /* GPIOE_2 */
-};
-
-&hdmi_tx {
- status = "okay";
- pinctrl-0 = <&hdmitx_hpd_pins>, <&hdmitx_ddc_pins>;
- pinctrl-names = "default";
- hdmi-supply = <&dc_in>;
-};
-
-&hdmi_tx_tmds_port {
- hdmi_tx_tmds_out: endpoint {
- remote-endpoint = <&hdmi_connector_in>;
- };
-};
-
-&ir {
- status = "okay";
- pinctrl-0 = <&remote_input_ao_pins>;
- pinctrl-names = "default";
-};
-
-&pwm_AO_cd {
- pinctrl-0 = <&pwm_ao_d_e_pins>;
- pinctrl-names = "default";
- clocks = <&xtal>;
- clock-names = "clkin1";
- status = "okay";
-};
-
-&saradc {
- status = "okay";
- vref-supply = <&vddao_1v8>;
-};
-
-/* SD card */
-&sd_emmc_b {
- status = "okay";
- pinctrl-0 = <&sdcard_c_pins>;
- pinctrl-1 = <&sdcard_clk_gate_c_pins>;
- pinctrl-names = "default", "clk-gate";
-
- bus-width = <4>;
- cap-sd-highspeed;
- max-frequency = <50000000>;
- disable-wp;
-
- /* TOFIX: SD card is barely usable in SDR modes */
-
- cd-gpios = <&gpio GPIOC_6 GPIO_ACTIVE_LOW>;
- vmmc-supply = <&tflash_vdd>;
- vqmmc-supply = <&vddio_c>;
-};
-
-/* eMMC */
-&sd_emmc_c {
- status = "okay";
- pinctrl-0 = <&emmc_ctrl_pins>, <&emmc_data_8b_pins>, <&emmc_ds_pins>;
- pinctrl-1 = <&emmc_clk_gate_pins>;
- pinctrl-names = "default", "clk-gate";
-
- bus-width = <8>;
- cap-mmc-highspeed;
- mmc-ddr-1_8v;
- mmc-hs200-1_8v;
- max-frequency = <200000000>;
- disable-wp;
-
- mmc-pwrseq = <&emmc_pwrseq>;
- vmmc-supply = <&vddao_3v3>;
- vqmmc-supply = <&emmc_1v8>;
-};
-
-&uart_AO {
- status = "okay";
- pinctrl-0 = <&uart_ao_a_pins>;
- pinctrl-names = "default";
-};
-
-&usb {
- status = "okay";
-};
-
-&usb2_phy0 {
- phy-supply = <&dc_in>;
-};
-
-&usb2_phy1 {
- /* Enable the hub which is connected to this port */
- phy-supply = <&vl_pwr_en>;
-};
diff --git a/arch/arm/dts/meson-sm1-khadas-vim3l.dts b/arch/arm/dts/meson-sm1-khadas-vim3l.dts
deleted file mode 100644
index f2c0981435..0000000000
--- a/arch/arm/dts/meson-sm1-khadas-vim3l.dts
+++ /dev/null
@@ -1,113 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Copyright (c) 2019 BayLibre, SAS
- * Author: Neil Armstrong <narmstrong at baylibre.com>
- */
-
-/dts-v1/;
-
-#include "meson-sm1.dtsi"
-#include "meson-khadas-vim3.dtsi"
-#include <dt-bindings/sound/meson-g12a-tohdmitx.h>
-
-/ {
- compatible = "khadas,vim3l", "amlogic,sm1";
- model = "Khadas VIM3L";
-
- vddcpu: regulator-vddcpu {
- /*
- * Silergy SY8030DEC Regulator.
- */
- compatible = "pwm-regulator";
-
- regulator-name = "VDDCPU";
- regulator-min-microvolt = <690000>;
- regulator-max-microvolt = <1050000>;
-
- vin-supply = <&vsys_3v3>;
-
- pwms = <&pwm_AO_cd 1 1250 0>;
- pwm-dutycycle-range = <100 0>;
-
- regulator-boot-on;
- regulator-always-on;
- };
-
- sound {
- model = "G12B-KHADAS-VIM3L";
- audio-routing = "TDMOUT_A IN 0", "FRDDR_A OUT 0",
- "TDMOUT_A IN 1", "FRDDR_B OUT 0",
- "TDMOUT_A IN 2", "FRDDR_C OUT 0",
- "TDM_A Playback", "TDMOUT_A OUT",
- "TDMIN_A IN 0", "TDM_A Capture",
- "TDMIN_A IN 13", "TDM_A Loopback",
- "TODDR_A IN 0", "TDMIN_A OUT",
- "TODDR_B IN 0", "TDMIN_A OUT",
- "TODDR_C IN 0", "TDMIN_A OUT";
- };
-};
-
-&cpu0 {
- cpu-supply = <&vddcpu>;
- operating-points-v2 = <&cpu_opp_table>;
- clocks = <&clkc CLKID_CPU_CLK>;
- clock-latency = <50000>;
-};
-
-&cpu1 {
- cpu-supply = <&vddcpu>;
- operating-points-v2 = <&cpu_opp_table>;
- clocks = <&clkc CLKID_CPU1_CLK>;
- clock-latency = <50000>;
-};
-
-&cpu2 {
- cpu-supply = <&vddcpu>;
- operating-points-v2 = <&cpu_opp_table>;
- clocks = <&clkc CLKID_CPU2_CLK>;
- clock-latency = <50000>;
-};
-
-&cpu3 {
- cpu-supply = <&vddcpu>;
- operating-points-v2 = <&cpu_opp_table>;
- clocks = <&clkc CLKID_CPU3_CLK>;
- clock-latency = <50000>;
-};
-
-&pwm_AO_cd {
- pinctrl-0 = <&pwm_ao_d_e_pins>;
- pinctrl-names = "default";
- clocks = <&xtal>;
- clock-names = "clkin1";
- status = "okay";
-};
-
-/*
- * The VIM3 on-board MCU can mux the PCIe/USB3.0 shared differential
- * lines using a FUSB340TMX USB 3.1 SuperSpeed Data Switch between
- * an USB3.0 Type A connector and a M.2 Key M slot.
- * The PHY driving these differential lines is shared between
- * the USB3.0 controller and the PCIe Controller, thus only
- * a single controller can use it.
- * If the MCU is configured to mux the PCIe/USB3.0 differential lines
- * to the M.2 Key M slot, uncomment the following block to disable
- * USB3.0 from the USB Complex and enable the PCIe controller.
- * The End User is not expected to uncomment the following except for
- * testing purposes, but instead rely on the firmware/bootloader to
- * update these nodes accordingly if PCIe mode is selected by the MCU.
- */
-/*
-&pcie {
- status = "okay";
-};
-
-&usb {
- phys = <&usb2_phy0>, <&usb2_phy1>;
- phy-names = "usb2-phy0", "usb2-phy1";
-};
- */
-
-&sd_emmc_a {
- sd-uhs-sdr50;
-};
diff --git a/arch/arm/dts/meson-sm1-odroid-c4.dts b/arch/arm/dts/meson-sm1-odroid-c4.dts
deleted file mode 100644
index 8c30ce6368..0000000000
--- a/arch/arm/dts/meson-sm1-odroid-c4.dts
+++ /dev/null
@@ -1,48 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Copyright (c) 2020 Dongjin Kim <tobetter at gmail.com>
- */
-
-/dts-v1/;
-
-#include "meson-sm1-odroid.dtsi"
-
-/ {
- compatible = "hardkernel,odroid-c4", "amlogic,sm1";
- model = "Hardkernel ODROID-C4";
-
- leds {
- compatible = "gpio-leds";
-
- led-blue {
- color = <LED_COLOR_ID_BLUE>;
- function = LED_FUNCTION_STATUS;
- gpios = <&gpio_ao GPIOAO_11 GPIO_ACTIVE_HIGH>;
- linux,default-trigger = "heartbeat";
- panic-indicator;
- };
- };
-
- sound {
- model = "ODROID-C4";
- };
-};
-
-&gpio {
- /*
- * WARNING: The USB Hub on the Odroid-C4 needs a reset signal
- * to be turned high in order to be detected by the USB Controller
- * This signal should be handled by a USB specific power sequence
- * in order to reset the Hub when USB bus is powered down.
- */
- hog-0 {
- gpio-hog;
- gpios = <GPIOH_4 GPIO_ACTIVE_HIGH>;
- output-high;
- line-name = "usb-hub-reset";
- };
-};
-
-&ir {
- linux,rc-map-name = "rc-odroid";
-};
diff --git a/arch/arm/dts/meson-sm1-odroid-hc4.dts b/arch/arm/dts/meson-sm1-odroid-hc4.dts
deleted file mode 100644
index f3f953225b..0000000000
--- a/arch/arm/dts/meson-sm1-odroid-hc4.dts
+++ /dev/null
@@ -1,140 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Copyright (c) 2020 Dongjin Kim <tobetter at gmail.com>
- */
-
-/dts-v1/;
-
-#include "meson-sm1-odroid.dtsi"
-
-/ {
- compatible = "hardkernel,odroid-hc4", "amlogic,sm1";
- model = "Hardkernel ODROID-HC4";
-
- aliases {
- rtc0 = &rtc;
- rtc1 = &vrtc;
- };
-
- fan0: pwm-fan {
- compatible = "pwm-fan";
- #cooling-cells = <2>;
- cooling-min-state = <0>;
- cooling-max-state = <3>;
- cooling-levels = <0 120 170 220>;
- pwms = <&pwm_cd 1 40000 0>;
- };
-
- leds {
- compatible = "gpio-leds";
-
- led-blue {
- color = <LED_COLOR_ID_BLUE>;
- function = LED_FUNCTION_STATUS;
- gpios = <&gpio_ao GPIOAO_11 GPIO_ACTIVE_HIGH>;
- linux,default-trigger = "heartbeat";
- panic-indicator;
- };
-
- led-red {
- color = <LED_COLOR_ID_RED>;
- function = LED_FUNCTION_POWER;
- gpios = <&gpio_ao GPIOAO_7 GPIO_ACTIVE_HIGH>;
- default-state = "on";
- };
- };
-
- /* Powers the SATA Disk 0 regulator, which is enabled when a disk load is detected */
- p12v_0: regulator-p12v_0 {
- compatible = "regulator-fixed";
- regulator-name = "P12V_0";
- regulator-min-microvolt = <12000000>;
- regulator-max-microvolt = <12000000>;
- vin-supply = <&main_12v>;
-
- gpio = <&gpio GPIOH_8 GPIO_OPEN_DRAIN>;
- enable-active-high;
- regulator-always-on;
- };
-
- /* Powers the SATA Disk 1 regulator, which is enabled when a disk load is detected */
- p12v_1: regulator-p12v_1 {
- compatible = "regulator-fixed";
- regulator-name = "P12V_1";
- regulator-min-microvolt = <12000000>;
- regulator-max-microvolt = <12000000>;
- vin-supply = <&main_12v>;
-
- gpio = <&gpio GPIOH_8 GPIO_OPEN_DRAIN>;
- enable-active-high;
- regulator-always-on;
- };
-
- sound {
- model = "ODROID-HC4";
- };
-};
-
-&cpu_thermal {
- cooling-maps {
- map {
- trip = <&cpu_passive>;
- cooling-device = <&fan0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
- };
- };
-};
-
-&ir {
- linux,rc-map-name = "rc-odroid";
-};
-
-&i2c2 {
- status = "okay";
- pinctrl-0 = <&i2c2_sda_x_pins>, <&i2c2_sck_x_pins>;
- pinctrl-names = "default";
-
- rtc: rtc at 51 {
- status = "okay";
- compatible = "nxp,pcf8563";
- reg = <0x51>;
- wakeup-source;
- };
-};
-
-&pcie {
- status = "okay";
- reset-gpios = <&gpio GPIOH_4 GPIO_ACTIVE_LOW>;
-};
-
-&pwm_cd {
- status = "okay";
- pinctrl-names = "default";
- pinctrl-0 = <&pwm_d_x6_pins>;
-};
-
-&sd_emmc_c {
- status = "disabled";
-};
-
-&spifc {
- status = "okay";
- pinctrl-0 = <&nor_pins>;
- pinctrl-names = "default";
-
- spi-flash at 0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "jedec,spi-nor";
- reg = <0>;
- spi-max-frequency = <104000000>;
- };
-};
-
-&usb {
- phys = <&usb2_phy1>;
- phy-names = "usb2-phy1";
-};
-
-&usb2_phy0 {
- status = "disabled";
-};
diff --git a/arch/arm/dts/meson-sm1-odroid.dtsi b/arch/arm/dts/meson-sm1-odroid.dtsi
deleted file mode 100644
index fd0ad85c16..0000000000
--- a/arch/arm/dts/meson-sm1-odroid.dtsi
+++ /dev/null
@@ -1,449 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Copyright (c) 2020 Dongjin Kim <tobetter at gmail.com>
- */
-
-#include "meson-sm1.dtsi"
-#include <dt-bindings/gpio/meson-g12a-gpio.h>
-#include <dt-bindings/leds/common.h>
-#include <dt-bindings/sound/meson-g12a-tohdmitx.h>
-
-/ {
- aliases {
- serial0 = &uart_AO;
- ethernet0 = ðmac;
- };
-
- chosen {
- stdout-path = "serial0:115200n8";
- };
-
- memory at 0 {
- device_type = "memory";
- reg = <0x0 0x0 0x0 0x40000000>;
- };
-
- emmc_pwrseq: emmc-pwrseq {
- compatible = "mmc-pwrseq-emmc";
- reset-gpios = <&gpio BOOT_12 GPIO_ACTIVE_LOW>;
- };
-
- tflash_vdd: regulator-tflash_vdd {
- compatible = "regulator-fixed";
-
- regulator-name = "TFLASH_VDD";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
-
- gpio = <&gpio_ao GPIOAO_3 GPIO_OPEN_DRAIN>;
- enable-active-high;
- regulator-always-on;
- };
-
- tf_io: gpio-regulator-tf_io {
- compatible = "regulator-gpio";
-
- regulator-name = "TF_IO";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <3300000>;
- vin-supply = <&vcc_5v>;
-
- enable-gpio = <&gpio GPIOE_2 GPIO_ACTIVE_HIGH>;
- enable-active-high;
- regulator-always-on;
-
- gpios = <&gpio_ao GPIOAO_6 GPIO_OPEN_SOURCE>;
- gpios-states = <0>;
-
- states = <3300000 0>,
- <1800000 1>;
- };
-
- flash_1v8: regulator-flash_1v8 {
- compatible = "regulator-fixed";
- regulator-name = "FLASH_1V8";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- vin-supply = <&vcc_3v3>;
- regulator-always-on;
- };
-
- main_12v: regulator-main_12v {
- compatible = "regulator-fixed";
- regulator-name = "12V";
- regulator-min-microvolt = <12000000>;
- regulator-max-microvolt = <12000000>;
- regulator-always-on;
- };
-
- vcc_5v: regulator-vcc_5v {
- compatible = "regulator-fixed";
- regulator-name = "5V";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- regulator-always-on;
- vin-supply = <&main_12v>;
- gpio = <&gpio GPIOH_8 GPIO_OPEN_DRAIN>;
- enable-active-high;
- };
-
- vcc_1v8: regulator-vcc_1v8 {
- compatible = "regulator-fixed";
- regulator-name = "VCC_1V8";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- vin-supply = <&vcc_3v3>;
- regulator-always-on;
- };
-
- vcc_3v3: regulator-vcc_3v3 {
- compatible = "regulator-fixed";
- regulator-name = "VCC_3V3";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- vin-supply = <&vddao_3v3>;
- regulator-always-on;
- /* FIXME: actually controlled by VDDCPU_B_EN */
- };
-
- vddcpu: regulator-vddcpu {
- /*
- * MP8756GD Regulator.
- */
- compatible = "pwm-regulator";
-
- regulator-name = "VDDCPU";
- regulator-min-microvolt = <721000>;
- regulator-max-microvolt = <1022000>;
-
- vin-supply = <&main_12v>;
-
- pwms = <&pwm_AO_cd 1 1250 0>;
- pwm-dutycycle-range = <100 0>;
-
- regulator-boot-on;
- regulator-always-on;
- };
-
- usb_pwr_en: regulator-usb_pwr_en {
- compatible = "regulator-fixed";
- regulator-name = "USB_PWR_EN";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- vin-supply = <&vcc_5v>;
-
- /* Connected to the microUSB port power enable */
- gpio = <&gpio_ao GPIOAO_2 GPIO_ACTIVE_HIGH>;
- enable-active-high;
- };
-
- vddao_1v8: regulator-vddao_1v8 {
- compatible = "regulator-fixed";
- regulator-name = "VDDAO_1V8";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- vin-supply = <&vddao_3v3>;
- regulator-always-on;
- };
-
- vddao_3v3: regulator-vddao_3v3 {
- compatible = "regulator-fixed";
- regulator-name = "VDDAO_3V3";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- vin-supply = <&main_12v>;
- regulator-always-on;
- };
-
- hdmi-connector {
- compatible = "hdmi-connector";
- type = "a";
-
- port {
- hdmi_connector_in: endpoint {
- remote-endpoint = <&hdmi_tx_tmds_out>;
- };
- };
- };
-
- sound {
- compatible = "amlogic,axg-sound-card";
- audio-aux-devs = <&tdmout_b>;
- audio-routing = "TDMOUT_B IN 0", "FRDDR_A OUT 1",
- "TDMOUT_B IN 1", "FRDDR_B OUT 1",
- "TDMOUT_B IN 2", "FRDDR_C OUT 1",
- "TDM_B Playback", "TDMOUT_B OUT";
-
- assigned-clocks = <&clkc CLKID_MPLL2>,
- <&clkc CLKID_MPLL0>,
- <&clkc CLKID_MPLL1>;
- assigned-clock-parents = <0>, <0>, <0>;
- assigned-clock-rates = <294912000>,
- <270950400>,
- <393216000>;
- status = "okay";
-
- dai-link-0 {
- sound-dai = <&frddr_a>;
- };
-
- dai-link-1 {
- sound-dai = <&frddr_b>;
- };
-
- dai-link-2 {
- sound-dai = <&frddr_c>;
- };
-
- /* 8ch hdmi interface */
- dai-link-3 {
- sound-dai = <&tdmif_b>;
- dai-format = "i2s";
- dai-tdm-slot-tx-mask-0 = <1 1>;
- dai-tdm-slot-tx-mask-1 = <1 1>;
- dai-tdm-slot-tx-mask-2 = <1 1>;
- dai-tdm-slot-tx-mask-3 = <1 1>;
- mclk-fs = <256>;
-
- codec {
- sound-dai = <&tohdmitx TOHDMITX_I2S_IN_B>;
- };
- };
-
- /* hdmi glue */
- dai-link-4 {
- sound-dai = <&tohdmitx TOHDMITX_I2S_OUT>;
-
- codec {
- sound-dai = <&hdmi_tx>;
- };
- };
- };
-};
-
-&arb {
- status = "okay";
-};
-
-&clkc_audio {
- status = "okay";
-};
-
-&cpu0 {
- cpu-supply = <&vddcpu>;
- operating-points-v2 = <&cpu_opp_table>;
- clocks = <&clkc CLKID_CPU_CLK>;
- clock-latency = <50000>;
-};
-
-&cpu1 {
- cpu-supply = <&vddcpu>;
- operating-points-v2 = <&cpu_opp_table>;
- clocks = <&clkc CLKID_CPU1_CLK>;
- clock-latency = <50000>;
-};
-
-&cpu2 {
- cpu-supply = <&vddcpu>;
- operating-points-v2 = <&cpu_opp_table>;
- clocks = <&clkc CLKID_CPU2_CLK>;
- clock-latency = <50000>;
-};
-
-&cpu3 {
- cpu-supply = <&vddcpu>;
- operating-points-v2 = <&cpu_opp_table>;
- clocks = <&clkc CLKID_CPU3_CLK>;
- clock-latency = <50000>;
-};
-
-&ext_mdio {
- external_phy: ethernet-phy at 0 {
- /* Realtek RTL8211F (0x001cc916) */
- reg = <0>;
- max-speed = <1000>;
-
- interrupt-parent = <&gpio_intc>;
- /* MAC_INTR on GPIOZ_14 */
- interrupts = <26 IRQ_TYPE_LEVEL_LOW>;
- };
-};
-
-ðmac {
- pinctrl-0 = <ð_pins>, <ð_rgmii_pins>;
- pinctrl-names = "default";
- status = "okay";
- phy-mode = "rgmii";
- phy-handle = <&external_phy>;
- amlogic,tx-delay-ns = <2>;
-};
-
-&frddr_a {
- status = "okay";
-};
-
-&frddr_b {
- status = "okay";
-};
-
-&frddr_c {
- status = "okay";
-};
-
-&gpio {
- gpio-line-names =
- /* GPIOZ */
- "", "", "", "", "", "", "", "",
- "", "", "", "", "", "", "", "",
- /* GPIOH */
- "", "", "", "", "",
- "PIN_36", /* GPIOH_5 */
- "PIN_26", /* GPIOH_6 */
- "PIN_32", /* GPIOH_7 */
- "",
- /* BOOT */
- "", "", "", "", "", "", "", "",
- "", "", "", "", "", "", "", "",
- /* GPIOC */
- "", "", "", "", "", "", "", "",
- /* GPIOA */
- "", "", "", "", "", "", "", "",
- "", "", "", "", "", "",
- "PIN_27", /* GPIOA_14 */
- "PIN_28", /* GPIOA_15 */
- /* GPIOX */
- "PIN_16", /* GPIOX_0 */
- "PIN_18", /* GPIOX_1 */
- "PIN_22", /* GPIOX_2 */
- "PIN_11", /* GPIOX_3 */
- "PIN_13", /* GPIOX_4 */
- "PIN_7", /* GPIOX_5 */
- "PIN_33", /* GPIOX_6 */
- "PIN_15", /* GPIOX_7 */
- "PIN_19", /* GPIOX_8 */
- "PIN_21", /* GPIOX_9 */
- "PIN_24", /* GPIOX_10 */
- "PIN_23", /* GPIOX_11 */
- "PIN_8", /* GPIOX_12 */
- "PIN_10", /* GPIOX_13 */
- "PIN_29", /* GPIOX_14 */
- "PIN_31", /* GPIOX_15 */
- "PIN_12", /* GPIOX_16 */
- "PIN_3", /* GPIOX_17 */
- "PIN_5", /* GPIOX_18 */
- "PIN_35"; /* GPIOX_19 */
-};
-
-&gpio_ao {
- gpio-line-names =
- /* GPIOAO */
- "", "", "", "",
- "PIN_47", /* GPIOAO_4 */
- "", "",
- "PIN_45", /* GPIOAO_7 */
- "PIN_46", /* GPIOAO_8 */
- "PIN_44", /* GPIOAO_9 */
- "PIN_42", /* GPIOAO_10 */
- "",
- /* GPIOE */
- "", "", "";
-};
-
-&hdmi_tx {
- status = "okay";
- pinctrl-0 = <&hdmitx_hpd_pins>, <&hdmitx_ddc_pins>;
- pinctrl-names = "default";
- hdmi-supply = <&vcc_5v>;
-};
-
-&hdmi_tx_tmds_port {
- hdmi_tx_tmds_out: endpoint {
- remote-endpoint = <&hdmi_connector_in>;
- };
-};
-
-&ir {
- status = "okay";
- pinctrl-0 = <&remote_input_ao_pins>;
- pinctrl-names = "default";
-};
-
-&pwm_AO_cd {
- pinctrl-0 = <&pwm_ao_d_e_pins>;
- pinctrl-names = "default";
- clocks = <&xtal>;
- clock-names = "clkin1";
- status = "okay";
-};
-
-&saradc {
- status = "okay";
-};
-
-/* SD card */
-&sd_emmc_b {
- status = "okay";
- pinctrl-0 = <&sdcard_c_pins>;
- pinctrl-1 = <&sdcard_clk_gate_c_pins>;
- pinctrl-names = "default", "clk-gate";
-
- bus-width = <4>;
- cap-sd-highspeed;
- max-frequency = <200000000>;
- sd-uhs-sdr12;
- sd-uhs-sdr25;
- sd-uhs-sdr50;
- sd-uhs-sdr104;
- disable-wp;
-
- cd-gpios = <&gpio GPIOC_6 GPIO_ACTIVE_LOW>;
- vmmc-supply = <&tflash_vdd>;
- vqmmc-supply = <&tf_io>;
-};
-
-/* eMMC */
-&sd_emmc_c {
- status = "okay";
- pinctrl-0 = <&emmc_ctrl_pins>, <&emmc_data_8b_pins>, <&emmc_ds_pins>;
- pinctrl-1 = <&emmc_clk_gate_pins>;
- pinctrl-names = "default", "clk-gate";
-
- bus-width = <8>;
- cap-mmc-highspeed;
- mmc-ddr-1_8v;
- mmc-hs200-1_8v;
- max-frequency = <200000000>;
- disable-wp;
-
- mmc-pwrseq = <&emmc_pwrseq>;
- vmmc-supply = <&vcc_3v3>;
- vqmmc-supply = <&flash_1v8>;
-};
-
-&tdmif_b {
- status = "okay";
-};
-
-&tdmout_b {
- status = "okay";
-};
-
-&tohdmitx {
- status = "okay";
-};
-
-&uart_AO {
- status = "okay";
- pinctrl-0 = <&uart_ao_a_pins>;
- pinctrl-names = "default";
-};
-
-&usb {
- status = "okay";
- vbus-supply = <&usb_pwr_en>;
-};
-
-&usb2_phy0 {
- phy-supply = <&vcc_5v>;
-};
-
diff --git a/arch/arm/dts/meson-sm1-sei610.dts b/arch/arm/dts/meson-sm1-sei610.dts
deleted file mode 100644
index 2194a77897..0000000000
--- a/arch/arm/dts/meson-sm1-sei610.dts
+++ /dev/null
@@ -1,616 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Copyright (c) 2019 BayLibre SAS. All rights reserved.
- */
-
-/dts-v1/;
-
-#include "meson-sm1.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/gpio/meson-g12a-gpio.h>
-#include <dt-bindings/sound/meson-g12a-tohdmitx.h>
-
-/ {
- compatible = "seirobotics,sei610", "amlogic,sm1";
- model = "SEI Robotics SEI610";
-
- aliases {
- serial0 = &uart_AO;
- ethernet0 = ðmac;
- };
-
- mono_dac: audio-codec-0 {
- compatible = "maxim,max98357a";
- #sound-dai-cells = <0>;
- sound-name-prefix = "U16";
- sdmode-gpios = <&gpio GPIOX_8 GPIO_ACTIVE_HIGH>;
- };
-
- dmics: audio-codec-1 {
- #sound-dai-cells = <0>;
- compatible = "dmic-codec";
- num-channels = <2>;
- wakeup-delay-ms = <50>;
- status = "okay";
- sound-name-prefix = "MIC";
- };
-
- chosen {
- stdout-path = "serial0:115200n8";
- };
-
- emmc_pwrseq: emmc-pwrseq {
- compatible = "mmc-pwrseq-emmc";
- reset-gpios = <&gpio BOOT_12 GPIO_ACTIVE_LOW>;
- };
-
- gpio-keys {
- compatible = "gpio-keys";
-
- key1 {
- label = "A";
- linux,code = <BTN_0>;
- gpios = <&gpio GPIOH_6 GPIO_ACTIVE_LOW>;
- interrupt-parent = <&gpio_intc>;
- interrupts = <34 IRQ_TYPE_EDGE_BOTH>;
- };
-
- key2 {
- label = "B";
- linux,code = <BTN_1>;
- gpios = <&gpio GPIOH_7 GPIO_ACTIVE_LOW>;
- interrupt-parent = <&gpio_intc>;
- interrupts = <35 IRQ_TYPE_EDGE_BOTH>;
- };
-
- key3 {
- label = "C";
- linux,code = <BTN_2>;
- gpios = <&gpio_ao GPIOAO_2 GPIO_ACTIVE_LOW>;
- interrupt-parent = <&gpio_intc>;
- interrupts = <2 IRQ_TYPE_EDGE_BOTH>;
- };
-
- mic_mute {
- label = "MicMute";
- linux,code = <SW_MUTE_DEVICE>;
- linux,input-type = <EV_SW>;
- gpios = <&gpio_ao GPIOE_2 GPIO_ACTIVE_LOW>;
- interrupt-parent = <&gpio_intc>;
- interrupts = <99 IRQ_TYPE_EDGE_BOTH>;
- };
-
- power_key {
- label = "PowerKey";
- linux,code = <KEY_POWER>;
- gpios = <&gpio_ao GPIOAO_3 GPIO_ACTIVE_LOW>;
- interrupt-parent = <&gpio_intc>;
- interrupts = <3 IRQ_TYPE_EDGE_BOTH>;
- };
- };
-
- hdmi-connector {
- compatible = "hdmi-connector";
- type = "a";
-
- port {
- hdmi_connector_in: endpoint {
- remote-endpoint = <&hdmi_tx_tmds_out>;
- };
- };
- };
-
- led-controller-1 {
- compatible = "gpio-leds";
-
- led-1 {
- label = "sei610:blue:bt";
- gpios = <&gpio GPIOC_7 (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>;
- default-state = "off";
- };
- };
-
- led-controller-2 {
- compatible = "pwm-leds";
-
- led-2 {
- label = "sei610:red:power";
- pwms = <&pwm_AO_ab 0 30518 0>;
- max-brightness = <255>;
- linux,default-trigger = "default-on";
- active-low;
- };
- };
-
- memory at 0 {
- device_type = "memory";
- reg = <0x0 0x0 0x0 0x40000000>;
- };
-
- ao_5v: regulator-ao_5v {
- compatible = "regulator-fixed";
- regulator-name = "AO_5V";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- vin-supply = <&dc_in>;
- regulator-always-on;
- };
-
- dc_in: regulator-dc_in {
- compatible = "regulator-fixed";
- regulator-name = "DC_IN";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- regulator-always-on;
- };
-
- emmc_1v8: regulator-emmc_1v8 {
- compatible = "regulator-fixed";
- regulator-name = "EMMC_1V8";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- vin-supply = <&vddao_3v3>;
- regulator-always-on;
- };
-
- vddao_3v3: regulator-vddao_3v3 {
- compatible = "regulator-fixed";
- regulator-name = "VDDAO_3V3";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- vin-supply = <&dc_in>;
- regulator-always-on;
- };
-
- /* Used by Tuner, RGB Led & IR Emitter LED array */
- vddao_3v3_t: regulator-vddao_3v3_t {
- compatible = "regulator-fixed";
- regulator-name = "VDDAO_3V3_T";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- vin-supply = <&vddao_3v3>;
- gpio = <&gpio GPIOH_8 GPIO_OPEN_DRAIN>;
- enable-active-low;
- regulator-always-on;
- };
-
- vddcpu: regulator-vddcpu {
- /*
- * SY8120B1ABC DC/DC Regulator.
- */
- compatible = "pwm-regulator";
-
- regulator-name = "VDDCPU";
- regulator-min-microvolt = <690000>;
- regulator-max-microvolt = <1050000>;
-
- vin-supply = <&dc_in>;
-
- pwms = <&pwm_AO_cd 1 1500 0>;
- pwm-dutycycle-range = <100 0>;
-
- regulator-boot-on;
- regulator-always-on;
- };
-
- vddio_ao1v8: regulator-vddio_ao1v8 {
- compatible = "regulator-fixed";
- regulator-name = "VDDIO_AO1V8";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- vin-supply = <&vddao_3v3>;
- regulator-always-on;
- };
-
- reserved-memory {
- /* TEE Reserved Memory */
- bl32_reserved: bl32 at 5000000 {
- reg = <0x0 0x05300000 0x0 0x2000000>;
- no-map;
- };
- };
-
- sdio_pwrseq: sdio-pwrseq {
- compatible = "mmc-pwrseq-simple";
- reset-gpios = <&gpio GPIOX_6 GPIO_ACTIVE_LOW>;
- clocks = <&wifi32k>;
- clock-names = "ext_clock";
- };
-
- sound {
- compatible = "amlogic,axg-sound-card";
- model = "SEI610";
- audio-aux-devs = <&tdmout_a>, <&tdmout_b>,
- <&tdmin_a>, <&tdmin_b>;
- audio-routing = "TDMOUT_A IN 0", "FRDDR_A OUT 0",
- "TDMOUT_A IN 1", "FRDDR_B OUT 0",
- "TDMOUT_A IN 2", "FRDDR_C OUT 0",
- "TDM_A Playback", "TDMOUT_A OUT",
- "TDMOUT_B IN 0", "FRDDR_A OUT 1",
- "TDMOUT_B IN 1", "FRDDR_B OUT 1",
- "TDMOUT_B IN 2", "FRDDR_C OUT 1",
- "TDM_B Playback", "TDMOUT_B OUT",
- "TODDR_A IN 4", "PDM Capture",
- "TODDR_B IN 4", "PDM Capture",
- "TODDR_C IN 4", "PDM Capture",
- "TDMIN_A IN 0", "TDM_A Capture",
- "TDMIN_A IN 3", "TDM_A Loopback",
- "TDMIN_B IN 0", "TDM_A Capture",
- "TDMIN_B IN 3", "TDM_A Loopback",
- "TDMIN_A IN 1", "TDM_B Capture",
- "TDMIN_A IN 4", "TDM_B Loopback",
- "TDMIN_B IN 1", "TDM_B Capture",
- "TDMIN_B IN 4", "TDM_B Loopback",
- "TODDR_A IN 0", "TDMIN_A OUT",
- "TODDR_B IN 0", "TDMIN_A OUT",
- "TODDR_C IN 0", "TDMIN_A OUT",
- "TODDR_A IN 1", "TDMIN_B OUT",
- "TODDR_B IN 1", "TDMIN_B OUT",
- "TODDR_C IN 1", "TDMIN_B OUT";
-
- assigned-clocks = <&clkc CLKID_MPLL2>,
- <&clkc CLKID_MPLL0>,
- <&clkc CLKID_MPLL1>;
- assigned-clock-parents = <0>, <0>, <0>;
- assigned-clock-rates = <294912000>,
- <270950400>,
- <393216000>;
- status = "okay";
-
- dai-link-0 {
- sound-dai = <&frddr_a>;
- };
-
- dai-link-1 {
- sound-dai = <&frddr_b>;
- };
-
- dai-link-2 {
- sound-dai = <&frddr_c>;
- };
-
- dai-link-3 {
- sound-dai = <&toddr_a>;
- };
-
- dai-link-4 {
- sound-dai = <&toddr_b>;
- };
-
- dai-link-5 {
- sound-dai = <&toddr_c>;
- };
-
- /* internal speaker interface */
- dai-link-6 {
- sound-dai = <&tdmif_a>;
- dai-format = "i2s";
- dai-tdm-slot-tx-mask-0 = <1 1>;
- mclk-fs = <256>;
-
- codec-0 {
- sound-dai = <&mono_dac>;
- };
-
- codec-1 {
- sound-dai = <&tohdmitx TOHDMITX_I2S_IN_A>;
- };
- };
-
- /* 8ch hdmi interface */
- dai-link-7 {
- sound-dai = <&tdmif_b>;
- dai-format = "i2s";
- dai-tdm-slot-tx-mask-0 = <1 1>;
- dai-tdm-slot-tx-mask-1 = <1 1>;
- dai-tdm-slot-tx-mask-2 = <1 1>;
- dai-tdm-slot-tx-mask-3 = <1 1>;
- mclk-fs = <256>;
-
- codec {
- sound-dai = <&tohdmitx TOHDMITX_I2S_IN_B>;
- };
- };
-
- /* internal digital mics */
- dai-link-8 {
- sound-dai = <&pdm>;
-
- codec {
- sound-dai = <&dmics>;
- };
- };
-
- /* hdmi glue */
- dai-link-9 {
- sound-dai = <&tohdmitx TOHDMITX_I2S_OUT>;
-
- codec {
- sound-dai = <&hdmi_tx>;
- };
- };
- };
-
- wifi32k: wifi32k {
- compatible = "pwm-clock";
- #clock-cells = <0>;
- clock-frequency = <32768>;
- pwms = <&pwm_ef 0 30518 0>; /* PWM_E at 32.768KHz */
- };
-};
-
-&arb {
- status = "okay";
-};
-
-&cec_AO {
- pinctrl-0 = <&cec_ao_a_h_pins>;
- pinctrl-names = "default";
- status = "disabled";
- hdmi-phandle = <&hdmi_tx>;
-};
-
-&cecb_AO {
- pinctrl-0 = <&cec_ao_b_h_pins>;
- pinctrl-names = "default";
- status = "okay";
- hdmi-phandle = <&hdmi_tx>;
-};
-
-&clkc_audio {
- status = "okay";
-};
-
-&cpu0 {
- cpu-supply = <&vddcpu>;
- operating-points-v2 = <&cpu_opp_table>;
- clocks = <&clkc CLKID_CPU_CLK>;
- clock-latency = <50000>;
-};
-
-&cpu1 {
- cpu-supply = <&vddcpu>;
- operating-points-v2 = <&cpu_opp_table>;
- clocks = <&clkc CLKID_CPU1_CLK>;
- clock-latency = <50000>;
-};
-
-&cpu2 {
- cpu-supply = <&vddcpu>;
- operating-points-v2 = <&cpu_opp_table>;
- clocks = <&clkc CLKID_CPU2_CLK>;
- clock-latency = <50000>;
-};
-
-&cpu3 {
- cpu-supply = <&vddcpu>;
- operating-points-v2 = <&cpu_opp_table>;
- clocks = <&clkc CLKID_CPU3_CLK>;
- clock-latency = <50000>;
-};
-
-ðmac {
- status = "okay";
- phy-handle = <&internal_ephy>;
- phy-mode = "rmii";
-};
-
-&frddr_a {
- status = "okay";
-};
-
-&frddr_b {
- status = "okay";
-};
-
-&frddr_c {
- status = "okay";
-};
-
-&hdmi_tx {
- status = "okay";
- pinctrl-0 = <&hdmitx_hpd_pins>, <&hdmitx_ddc_pins>;
- pinctrl-names = "default";
-};
-
-&hdmi_tx_tmds_port {
- hdmi_tx_tmds_out: endpoint {
- remote-endpoint = <&hdmi_connector_in>;
- };
-};
-
-&i2c3 {
- status = "okay";
- pinctrl-0 = <&i2c3_sda_a_pins>, <&i2c3_sck_a_pins>;
- pinctrl-names = "default";
-};
-
-&ir {
- status = "okay";
- pinctrl-0 = <&remote_input_ao_pins>;
- pinctrl-names = "default";
-};
-
-&pdm {
- pinctrl-0 = <&pdm_din0_z_pins>, <&pdm_dclk_z_pins>;
- pinctrl-names = "default";
- status = "okay";
-};
-
-&pwm_AO_ab {
- status = "okay";
- pinctrl-0 = <&pwm_ao_a_pins>;
- pinctrl-names = "default";
- clocks = <&xtal>;
- clock-names = "clkin0";
-};
-
-&pwm_AO_cd {
- pinctrl-0 = <&pwm_ao_d_e_pins>;
- pinctrl-names = "default";
- clocks = <&xtal>;
- clock-names = "clkin1";
- status = "okay";
-};
-
-&pwm_ef {
- status = "okay";
- pinctrl-0 = <&pwm_e_pins>;
- pinctrl-names = "default";
- clocks = <&xtal>;
- clock-names = "clkin0";
-};
-
-&saradc {
- status = "okay";
- vref-supply = <&vddio_ao1v8>;
-};
-
-/* SDIO */
-&sd_emmc_a {
- status = "okay";
- pinctrl-0 = <&sdio_pins>;
- pinctrl-1 = <&sdio_clk_gate_pins>;
- pinctrl-names = "default", "clk-gate";
- #address-cells = <1>;
- #size-cells = <0>;
-
- bus-width = <4>;
- cap-sd-highspeed;
- sd-uhs-sdr50;
- max-frequency = <100000000>;
-
- non-removable;
- disable-wp;
-
- /* WiFi firmware requires power to be kept while in suspend */
- keep-power-in-suspend;
-
- mmc-pwrseq = <&sdio_pwrseq>;
-
- vmmc-supply = <&vddao_3v3>;
- vqmmc-supply = <&vddio_ao1v8>;
-
- brcmf: wifi at 1 {
- reg = <1>;
- compatible = "brcm,bcm4329-fmac";
- };
-};
-
-/* SD card */
-&sd_emmc_b {
- status = "okay";
- pinctrl-0 = <&sdcard_c_pins>;
- pinctrl-1 = <&sdcard_clk_gate_c_pins>;
- pinctrl-names = "default", "clk-gate";
-
- bus-width = <4>;
- cap-sd-highspeed;
- max-frequency = <50000000>;
- disable-wp;
-
- cd-gpios = <&gpio GPIOC_6 GPIO_ACTIVE_LOW>;
- vmmc-supply = <&vddao_3v3>;
- vqmmc-supply = <&vddao_3v3>;
-};
-
-/* eMMC */
-&sd_emmc_c {
- status = "okay";
- pinctrl-0 = <&emmc_ctrl_pins>, <&emmc_data_8b_pins>, <&emmc_ds_pins>;
- pinctrl-1 = <&emmc_clk_gate_pins>;
- pinctrl-names = "default", "clk-gate";
-
- bus-width = <8>;
- cap-mmc-highspeed;
- mmc-ddr-1_8v;
- mmc-hs200-1_8v;
- max-frequency = <200000000>;
- non-removable;
- disable-wp;
-
- mmc-pwrseq = <&emmc_pwrseq>;
- vmmc-supply = <&vddao_3v3>;
- vqmmc-supply = <&emmc_1v8>;
-};
-
-&tdmif_a {
- pinctrl-0 = <&tdm_a_dout0_pins>, <&tdm_a_fs_pins>, <&tdm_a_sclk_pins>;
- pinctrl-names = "default";
- status = "okay";
-
- assigned-clocks = <&clkc_audio AUD_CLKID_TDM_SCLK_PAD0>,
- <&clkc_audio AUD_CLKID_TDM_LRCLK_PAD0>;
- assigned-clock-parents = <&clkc_audio AUD_CLKID_MST_A_SCLK>,
- <&clkc_audio AUD_CLKID_MST_A_LRCLK>;
- assigned-clock-rates = <0>, <0>;
-};
-
-&tdmif_b {
- status = "okay";
-};
-
-&tdmin_a {
- status = "okay";
-};
-
-&tdmin_b {
- status = "okay";
-};
-
-&tdmout_a {
- status = "okay";
-};
-
-&tdmout_b {
- status = "okay";
-};
-
-&toddr_a {
- status = "okay";
-};
-
-&toddr_b {
- status = "okay";
-};
-
-&toddr_c {
- status = "okay";
-};
-
-&tohdmitx {
- status = "okay";
-};
-
-&uart_A {
- status = "okay";
- pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>;
- pinctrl-names = "default";
- uart-has-rtscts;
-
- bluetooth {
- compatible = "brcm,bcm43438-bt";
- interrupt-parent = <&gpio_intc>;
- interrupts = <95 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "host-wakeup";
- shutdown-gpios = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>;
- max-speed = <2000000>;
- clocks = <&wifi32k>;
- clock-names = "lpo";
- vbat-supply = <&vddao_3v3>;
- vddio-supply = <&vddio_ao1v8>;
- };
-};
-
-/* Exposed via the on-board USB to Serial FT232RL IC */
-&uart_AO {
- status = "okay";
- pinctrl-0 = <&uart_ao_a_pins>;
- pinctrl-names = "default";
-};
-
-&usb {
- status = "okay";
- dr_mode = "otg";
-};
diff --git a/arch/arm/dts/meson-sm1.dtsi b/arch/arm/dts/meson-sm1.dtsi
deleted file mode 100644
index 56ca0ba224..0000000000
--- a/arch/arm/dts/meson-sm1.dtsi
+++ /dev/null
@@ -1,550 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Copyright (c) 2019 BayLibre, SAS
- * Author: Neil Armstrong <narmstrong at baylibre.com>
- */
-
-#include "meson-g12-common.dtsi"
-#include <dt-bindings/clock/axg-audio-clkc.h>
-#include <dt-bindings/power/meson-sm1-power.h>
-#include <dt-bindings/reset/amlogic,meson-axg-audio-arb.h>
-#include <dt-bindings/reset/amlogic,meson-g12a-audio-reset.h>
-
-/ {
- compatible = "amlogic,sm1";
-
- tdmif_a: audio-controller-0 {
- compatible = "amlogic,axg-tdm-iface";
- #sound-dai-cells = <0>;
- sound-name-prefix = "TDM_A";
- clocks = <&clkc_audio AUD_CLKID_MST_A_MCLK>,
- <&clkc_audio AUD_CLKID_MST_A_SCLK>,
- <&clkc_audio AUD_CLKID_MST_A_LRCLK>;
- clock-names = "mclk", "sclk", "lrclk";
- status = "disabled";
- };
-
- tdmif_b: audio-controller-1 {
- compatible = "amlogic,axg-tdm-iface";
- #sound-dai-cells = <0>;
- sound-name-prefix = "TDM_B";
- clocks = <&clkc_audio AUD_CLKID_MST_B_MCLK>,
- <&clkc_audio AUD_CLKID_MST_B_SCLK>,
- <&clkc_audio AUD_CLKID_MST_B_LRCLK>;
- clock-names = "mclk", "sclk", "lrclk";
- status = "disabled";
- };
-
- tdmif_c: audio-controller-2 {
- compatible = "amlogic,axg-tdm-iface";
- #sound-dai-cells = <0>;
- sound-name-prefix = "TDM_C";
- clocks = <&clkc_audio AUD_CLKID_MST_C_MCLK>,
- <&clkc_audio AUD_CLKID_MST_C_SCLK>,
- <&clkc_audio AUD_CLKID_MST_C_LRCLK>;
- clock-names = "mclk", "sclk", "lrclk";
- status = "disabled";
- };
-
- cpus {
- #address-cells = <0x2>;
- #size-cells = <0x0>;
-
- cpu0: cpu at 0 {
- device_type = "cpu";
- compatible = "arm,cortex-a55";
- reg = <0x0 0x0>;
- enable-method = "psci";
- next-level-cache = <&l2>;
- #cooling-cells = <2>;
- };
-
- cpu1: cpu at 1 {
- device_type = "cpu";
- compatible = "arm,cortex-a55";
- reg = <0x0 0x1>;
- enable-method = "psci";
- next-level-cache = <&l2>;
- #cooling-cells = <2>;
- };
-
- cpu2: cpu at 2 {
- device_type = "cpu";
- compatible = "arm,cortex-a55";
- reg = <0x0 0x2>;
- enable-method = "psci";
- next-level-cache = <&l2>;
- #cooling-cells = <2>;
- };
-
- cpu3: cpu at 3 {
- device_type = "cpu";
- compatible = "arm,cortex-a55";
- reg = <0x0 0x3>;
- enable-method = "psci";
- next-level-cache = <&l2>;
- #cooling-cells = <2>;
- };
-
- l2: l2-cache0 {
- compatible = "cache";
- cache-level = <2>;
- };
- };
-
- cpu_opp_table: opp-table {
- compatible = "operating-points-v2";
- opp-shared;
-
- opp-1000000000 {
- opp-hz = /bits/ 64 <1000000000>;
- opp-microvolt = <770000>;
- };
-
- opp-1200000000 {
- opp-hz = /bits/ 64 <1200000000>;
- opp-microvolt = <780000>;
- };
-
- opp-1404000000 {
- opp-hz = /bits/ 64 <1404000000>;
- opp-microvolt = <790000>;
- };
-
- opp-1500000000 {
- opp-hz = /bits/ 64 <1500000000>;
- opp-microvolt = <800000>;
- };
-
- opp-1608000000 {
- opp-hz = /bits/ 64 <1608000000>;
- opp-microvolt = <810000>;
- };
-
- opp-1704000000 {
- opp-hz = /bits/ 64 <1704000000>;
- opp-microvolt = <850000>;
- };
-
- opp-1800000000 {
- opp-hz = /bits/ 64 <1800000000>;
- opp-microvolt = <900000>;
- };
-
- opp-1908000000 {
- opp-hz = /bits/ 64 <1908000000>;
- opp-microvolt = <950000>;
- };
- };
-};
-
-&apb {
- audio: bus at 60000 {
- compatible = "simple-bus";
- reg = <0x0 0x60000 0x0 0x1000>;
- #address-cells = <2>;
- #size-cells = <2>;
- ranges = <0x0 0x0 0x0 0x60000 0x0 0x1000>;
-
- clkc_audio: clock-controller at 0 {
- status = "disabled";
- compatible = "amlogic,sm1-audio-clkc";
- reg = <0x0 0x0 0x0 0xb4>;
- #clock-cells = <1>;
- #reset-cells = <1>;
-
- clocks = <&clkc CLKID_AUDIO>,
- <&clkc CLKID_MPLL0>,
- <&clkc CLKID_MPLL1>,
- <&clkc CLKID_MPLL2>,
- <&clkc CLKID_MPLL3>,
- <&clkc CLKID_HIFI_PLL>,
- <&clkc CLKID_FCLK_DIV3>,
- <&clkc CLKID_FCLK_DIV4>,
- <&clkc CLKID_FCLK_DIV5>;
- clock-names = "pclk",
- "mst_in0",
- "mst_in1",
- "mst_in2",
- "mst_in3",
- "mst_in4",
- "mst_in5",
- "mst_in6",
- "mst_in7";
-
- resets = <&reset RESET_AUDIO>;
- };
-
- toddr_a: audio-controller at 100 {
- compatible = "amlogic,sm1-toddr",
- "amlogic,axg-toddr";
- reg = <0x0 0x100 0x0 0x2c>;
- #sound-dai-cells = <0>;
- sound-name-prefix = "TODDR_A";
- interrupts = <GIC_SPI 148 IRQ_TYPE_EDGE_RISING>;
- clocks = <&clkc_audio AUD_CLKID_TODDR_A>;
- resets = <&arb AXG_ARB_TODDR_A>,
- <&clkc_audio AUD_RESET_TODDR_A>;
- reset-names = "arb", "rst";
- amlogic,fifo-depth = <8192>;
- status = "disabled";
- };
-
- toddr_b: audio-controller at 140 {
- compatible = "amlogic,sm1-toddr",
- "amlogic,axg-toddr";
- reg = <0x0 0x140 0x0 0x2c>;
- #sound-dai-cells = <0>;
- sound-name-prefix = "TODDR_B";
- interrupts = <GIC_SPI 149 IRQ_TYPE_EDGE_RISING>;
- clocks = <&clkc_audio AUD_CLKID_TODDR_B>;
- resets = <&arb AXG_ARB_TODDR_B>,
- <&clkc_audio AUD_RESET_TODDR_B>;
- reset-names = "arb", "rst";
- amlogic,fifo-depth = <256>;
- status = "disabled";
- };
-
- toddr_c: audio-controller at 180 {
- compatible = "amlogic,sm1-toddr",
- "amlogic,axg-toddr";
- reg = <0x0 0x180 0x0 0x2c>;
- #sound-dai-cells = <0>;
- sound-name-prefix = "TODDR_C";
- interrupts = <GIC_SPI 150 IRQ_TYPE_EDGE_RISING>;
- clocks = <&clkc_audio AUD_CLKID_TODDR_C>;
- resets = <&arb AXG_ARB_TODDR_C>,
- <&clkc_audio AUD_RESET_TODDR_C>;
- reset-names = "arb", "rst";
- amlogic,fifo-depth = <256>;
- status = "disabled";
- };
-
- frddr_a: audio-controller at 1c0 {
- compatible = "amlogic,sm1-frddr",
- "amlogic,axg-frddr";
- reg = <0x0 0x1c0 0x0 0x2c>;
- #sound-dai-cells = <0>;
- sound-name-prefix = "FRDDR_A";
- interrupts = <GIC_SPI 152 IRQ_TYPE_EDGE_RISING>;
- clocks = <&clkc_audio AUD_CLKID_FRDDR_A>;
- resets = <&arb AXG_ARB_FRDDR_A>,
- <&clkc_audio AUD_RESET_FRDDR_A>;
- reset-names = "arb", "rst";
- amlogic,fifo-depth = <512>;
- status = "disabled";
- };
-
- frddr_b: audio-controller at 200 {
- compatible = "amlogic,sm1-frddr",
- "amlogic,axg-frddr";
- reg = <0x0 0x200 0x0 0x2c>;
- #sound-dai-cells = <0>;
- sound-name-prefix = "FRDDR_B";
- interrupts = <GIC_SPI 153 IRQ_TYPE_EDGE_RISING>;
- clocks = <&clkc_audio AUD_CLKID_FRDDR_B>;
- resets = <&arb AXG_ARB_FRDDR_B>,
- <&clkc_audio AUD_RESET_FRDDR_B>;
- reset-names = "arb", "rst";
- amlogic,fifo-depth = <256>;
- status = "disabled";
- };
-
- frddr_c: audio-controller at 240 {
- compatible = "amlogic,sm1-frddr",
- "amlogic,axg-frddr";
- reg = <0x0 0x240 0x0 0x2c>;
- #sound-dai-cells = <0>;
- sound-name-prefix = "FRDDR_C";
- interrupts = <GIC_SPI 154 IRQ_TYPE_EDGE_RISING>;
- clocks = <&clkc_audio AUD_CLKID_FRDDR_C>;
- resets = <&arb AXG_ARB_FRDDR_C>,
- <&clkc_audio AUD_RESET_FRDDR_C>;
- reset-names = "arb", "rst";
- amlogic,fifo-depth = <256>;
- status = "disabled";
- };
-
- arb: reset-controller at 280 {
- status = "disabled";
- compatible = "amlogic,meson-sm1-audio-arb";
- reg = <0x0 0x280 0x0 0x4>;
- #reset-cells = <1>;
- clocks = <&clkc_audio AUD_CLKID_DDR_ARB>;
- };
-
- tdmin_a: audio-controller at 300 {
- compatible = "amlogic,sm1-tdmin",
- "amlogic,axg-tdmin";
- reg = <0x0 0x300 0x0 0x40>;
- sound-name-prefix = "TDMIN_A";
- resets = <&clkc_audio AUD_RESET_TDMIN_A>;
- clocks = <&clkc_audio AUD_CLKID_TDMIN_A>,
- <&clkc_audio AUD_CLKID_TDMIN_A_SCLK>,
- <&clkc_audio AUD_CLKID_TDMIN_A_SCLK_SEL>,
- <&clkc_audio AUD_CLKID_TDMIN_A_LRCLK>,
- <&clkc_audio AUD_CLKID_TDMIN_A_LRCLK>;
- clock-names = "pclk", "sclk", "sclk_sel",
- "lrclk", "lrclk_sel";
- status = "disabled";
- };
-
- tdmin_b: audio-controller at 340 {
- compatible = "amlogic,sm1-tdmin",
- "amlogic,axg-tdmin";
- reg = <0x0 0x340 0x0 0x40>;
- sound-name-prefix = "TDMIN_B";
- resets = <&clkc_audio AUD_RESET_TDMIN_B>;
- clocks = <&clkc_audio AUD_CLKID_TDMIN_B>,
- <&clkc_audio AUD_CLKID_TDMIN_B_SCLK>,
- <&clkc_audio AUD_CLKID_TDMIN_B_SCLK_SEL>,
- <&clkc_audio AUD_CLKID_TDMIN_B_LRCLK>,
- <&clkc_audio AUD_CLKID_TDMIN_B_LRCLK>;
- clock-names = "pclk", "sclk", "sclk_sel",
- "lrclk", "lrclk_sel";
- status = "disabled";
- };
-
- tdmin_c: audio-controller at 380 {
- compatible = "amlogic,sm1-tdmin",
- "amlogic,axg-tdmin";
- reg = <0x0 0x380 0x0 0x40>;
- sound-name-prefix = "TDMIN_C";
- resets = <&clkc_audio AUD_RESET_TDMIN_C>;
- clocks = <&clkc_audio AUD_CLKID_TDMIN_C>,
- <&clkc_audio AUD_CLKID_TDMIN_C_SCLK>,
- <&clkc_audio AUD_CLKID_TDMIN_C_SCLK_SEL>,
- <&clkc_audio AUD_CLKID_TDMIN_C_LRCLK>,
- <&clkc_audio AUD_CLKID_TDMIN_C_LRCLK>;
- clock-names = "pclk", "sclk", "sclk_sel",
- "lrclk", "lrclk_sel";
- status = "disabled";
- };
-
- tdmin_lb: audio-controller at 3c0 {
- compatible = "amlogic,sm1-tdmin",
- "amlogic,axg-tdmin";
- reg = <0x0 0x3c0 0x0 0x40>;
- sound-name-prefix = "TDMIN_LB";
- resets = <&clkc_audio AUD_RESET_TDMIN_LB>;
- clocks = <&clkc_audio AUD_CLKID_TDMIN_LB>,
- <&clkc_audio AUD_CLKID_TDMIN_LB_SCLK>,
- <&clkc_audio AUD_CLKID_TDMIN_LB_SCLK_SEL>,
- <&clkc_audio AUD_CLKID_TDMIN_LB_LRCLK>,
- <&clkc_audio AUD_CLKID_TDMIN_LB_LRCLK>;
- clock-names = "pclk", "sclk", "sclk_sel",
- "lrclk", "lrclk_sel";
- status = "disabled";
- };
-
- spdifin: audio-controller at 400 {
- compatible = "amlogic,g12a-spdifin",
- "amlogic,axg-spdifin";
- reg = <0x0 0x400 0x0 0x30>;
- #sound-dai-cells = <0>;
- sound-name-prefix = "SPDIFIN";
- interrupts = <GIC_SPI 151 IRQ_TYPE_EDGE_RISING>;
- clocks = <&clkc_audio AUD_CLKID_SPDIFIN>,
- <&clkc_audio AUD_CLKID_SPDIFIN_CLK>;
- clock-names = "pclk", "refclk";
- resets = <&clkc_audio AUD_RESET_SPDIFIN>;
- status = "disabled";
- };
-
- spdifout_a: audio-controller at 480 {
- compatible = "amlogic,g12a-spdifout",
- "amlogic,axg-spdifout";
- reg = <0x0 0x480 0x0 0x50>;
- #sound-dai-cells = <0>;
- sound-name-prefix = "SPDIFOUT_A";
- clocks = <&clkc_audio AUD_CLKID_SPDIFOUT>,
- <&clkc_audio AUD_CLKID_SPDIFOUT_CLK>;
- clock-names = "pclk", "mclk";
- resets = <&clkc_audio AUD_RESET_SPDIFOUT>;
- status = "disabled";
- };
-
- tdmout_a: audio-controller at 500 {
- compatible = "amlogic,sm1-tdmout";
- reg = <0x0 0x500 0x0 0x40>;
- sound-name-prefix = "TDMOUT_A";
- resets = <&clkc_audio AUD_RESET_TDMOUT_A>;
- clocks = <&clkc_audio AUD_CLKID_TDMOUT_A>,
- <&clkc_audio AUD_CLKID_TDMOUT_A_SCLK>,
- <&clkc_audio AUD_CLKID_TDMOUT_A_SCLK_SEL>,
- <&clkc_audio AUD_CLKID_TDMOUT_A_LRCLK>,
- <&clkc_audio AUD_CLKID_TDMOUT_A_LRCLK>;
- clock-names = "pclk", "sclk", "sclk_sel",
- "lrclk", "lrclk_sel";
- status = "disabled";
- };
-
- tdmout_b: audio-controller at 540 {
- compatible = "amlogic,sm1-tdmout";
- reg = <0x0 0x540 0x0 0x40>;
- sound-name-prefix = "TDMOUT_B";
- resets = <&clkc_audio AUD_RESET_TDMOUT_B>;
- clocks = <&clkc_audio AUD_CLKID_TDMOUT_B>,
- <&clkc_audio AUD_CLKID_TDMOUT_B_SCLK>,
- <&clkc_audio AUD_CLKID_TDMOUT_B_SCLK_SEL>,
- <&clkc_audio AUD_CLKID_TDMOUT_B_LRCLK>,
- <&clkc_audio AUD_CLKID_TDMOUT_B_LRCLK>;
- clock-names = "pclk", "sclk", "sclk_sel",
- "lrclk", "lrclk_sel";
- status = "disabled";
- };
-
- tdmout_c: audio-controller at 580 {
- compatible = "amlogic,sm1-tdmout";
- reg = <0x0 0x580 0x0 0x40>;
- sound-name-prefix = "TDMOUT_C";
- resets = <&clkc_audio AUD_RESET_TDMOUT_C>;
- clocks = <&clkc_audio AUD_CLKID_TDMOUT_C>,
- <&clkc_audio AUD_CLKID_TDMOUT_C_SCLK>,
- <&clkc_audio AUD_CLKID_TDMOUT_C_SCLK_SEL>,
- <&clkc_audio AUD_CLKID_TDMOUT_C_LRCLK>,
- <&clkc_audio AUD_CLKID_TDMOUT_C_LRCLK>;
- clock-names = "pclk", "sclk", "sclk_sel",
- "lrclk", "lrclk_sel";
- status = "disabled";
- };
-
- toacodec: audio-controller at 740 {
- compatible = "amlogic,sm1-toacodec",
- "amlogic,g12a-toacodec";
- reg = <0x0 0x740 0x0 0x4>;
- #sound-dai-cells = <1>;
- sound-name-prefix = "TOACODEC";
- resets = <&clkc_audio AUD_RESET_TOACODEC>;
- status = "disabled";
- };
-
- tohdmitx: audio-controller at 744 {
- compatible = "amlogic,sm1-tohdmitx",
- "amlogic,g12a-tohdmitx";
- reg = <0x0 0x744 0x0 0x4>;
- #sound-dai-cells = <1>;
- sound-name-prefix = "TOHDMITX";
- resets = <&clkc_audio AUD_RESET_TOHDMITX>;
- status = "disabled";
- };
-
- toddr_d: audio-controller at 840 {
- compatible = "amlogic,sm1-toddr",
- "amlogic,axg-toddr";
- reg = <0x0 0x840 0x0 0x2c>;
- #sound-dai-cells = <0>;
- sound-name-prefix = "TODDR_D";
- interrupts = <GIC_SPI 49 IRQ_TYPE_EDGE_RISING>;
- clocks = <&clkc_audio AUD_CLKID_TODDR_D>;
- resets = <&arb AXG_ARB_TODDR_D>,
- <&clkc_audio AUD_RESET_TODDR_D>;
- reset-names = "arb", "rst";
- amlogic,fifo-depth = <256>;
- status = "disabled";
- };
-
- frddr_d: audio-controller at 880 {
- compatible = "amlogic,sm1-frddr",
- "amlogic,axg-frddr";
- reg = <0x0 0x880 0x0 0x2c>;
- #sound-dai-cells = <0>;
- sound-name-prefix = "FRDDR_D";
- interrupts = <GIC_SPI 50 IRQ_TYPE_EDGE_RISING>;
- clocks = <&clkc_audio AUD_CLKID_FRDDR_D>;
- resets = <&arb AXG_ARB_FRDDR_D>,
- <&clkc_audio AUD_RESET_FRDDR_D>;
- reset-names = "arb", "rst";
- amlogic,fifo-depth = <256>;
- status = "disabled";
- };
- };
-
- pdm: audio-controller at 61000 {
- compatible = "amlogic,sm1-pdm",
- "amlogic,axg-pdm";
- reg = <0x0 0x61000 0x0 0x34>;
- #sound-dai-cells = <0>;
- sound-name-prefix = "PDM";
- clocks = <&clkc_audio AUD_CLKID_PDM>,
- <&clkc_audio AUD_CLKID_PDM_DCLK>,
- <&clkc_audio AUD_CLKID_PDM_SYSCLK>;
- clock-names = "pclk", "dclk", "sysclk";
- resets = <&clkc_audio AUD_RESET_PDM>;
- status = "disabled";
- };
-};
-
-&cecb_AO {
- compatible = "amlogic,meson-sm1-ao-cec";
-};
-
-&clk_msr {
- compatible = "amlogic,meson-sm1-clk-measure";
-};
-
-
-&clkc {
- compatible = "amlogic,sm1-clkc";
-};
-
-&cpu_thermal {
- cooling-maps {
- map0 {
- trip = <&cpu_passive>;
- cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
- <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
- <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
- <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
- };
-
- map1 {
- trip = <&cpu_hot>;
- cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
- <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
- <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
- <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
- };
- };
-};
-
-ðmac {
- power-domains = <&pwrc PWRC_SM1_ETH_ID>;
-};
-
-&gpio_intc {
- compatible = "amlogic,meson-sm1-gpio-intc",
- "amlogic,meson-gpio-intc";
-};
-
-&pcie {
- power-domains = <&pwrc PWRC_SM1_PCIE_ID>;
-};
-
-&pmu {
- compatible = "amlogic,sm1-ddr-pmu";
-};
-
-&pwrc {
- compatible = "amlogic,meson-sm1-pwrc";
-};
-
-&simplefb_cvbs {
- power-domains = <&pwrc PWRC_SM1_VPU_ID>;
-};
-
-&simplefb_hdmi {
- power-domains = <&pwrc PWRC_SM1_VPU_ID>;
-};
-
-&vdec {
- compatible = "amlogic,sm1-vdec";
-};
-
-&vpu {
- power-domains = <&pwrc PWRC_SM1_VPU_ID>;
-};
-
-&usb {
- power-domains = <&pwrc PWRC_SM1_USB_ID>;
-};
diff --git a/include/dt-bindings/gpio/meson-g12a-gpio.h b/include/dt-bindings/gpio/meson-g12a-gpio.h
deleted file mode 100644
index f7bd69350d..0000000000
--- a/include/dt-bindings/gpio/meson-g12a-gpio.h
+++ /dev/null
@@ -1,114 +0,0 @@
-/* SPDX-License-Identifier: (GPL-2.0+ or MIT) */
-/*
- * Copyright (c) 2018 Amlogic, Inc. All rights reserved.
- * Author: Xingyu Chen <xingyu.chen at amlogic.com>
- */
-
-#ifndef _DT_BINDINGS_MESON_G12A_GPIO_H
-#define _DT_BINDINGS_MESON_G12A_GPIO_H
-
-/* First GPIO chip */
-#define GPIOAO_0 0
-#define GPIOAO_1 1
-#define GPIOAO_2 2
-#define GPIOAO_3 3
-#define GPIOAO_4 4
-#define GPIOAO_5 5
-#define GPIOAO_6 6
-#define GPIOAO_7 7
-#define GPIOAO_8 8
-#define GPIOAO_9 9
-#define GPIOAO_10 10
-#define GPIOAO_11 11
-#define GPIOE_0 12
-#define GPIOE_1 13
-#define GPIOE_2 14
-
-/* Second GPIO chip */
-#define GPIOZ_0 0
-#define GPIOZ_1 1
-#define GPIOZ_2 2
-#define GPIOZ_3 3
-#define GPIOZ_4 4
-#define GPIOZ_5 5
-#define GPIOZ_6 6
-#define GPIOZ_7 7
-#define GPIOZ_8 8
-#define GPIOZ_9 9
-#define GPIOZ_10 10
-#define GPIOZ_11 11
-#define GPIOZ_12 12
-#define GPIOZ_13 13
-#define GPIOZ_14 14
-#define GPIOZ_15 15
-#define GPIOH_0 16
-#define GPIOH_1 17
-#define GPIOH_2 18
-#define GPIOH_3 19
-#define GPIOH_4 20
-#define GPIOH_5 21
-#define GPIOH_6 22
-#define GPIOH_7 23
-#define GPIOH_8 24
-#define BOOT_0 25
-#define BOOT_1 26
-#define BOOT_2 27
-#define BOOT_3 28
-#define BOOT_4 29
-#define BOOT_5 30
-#define BOOT_6 31
-#define BOOT_7 32
-#define BOOT_8 33
-#define BOOT_9 34
-#define BOOT_10 35
-#define BOOT_11 36
-#define BOOT_12 37
-#define BOOT_13 38
-#define BOOT_14 39
-#define BOOT_15 40
-#define GPIOC_0 41
-#define GPIOC_1 42
-#define GPIOC_2 43
-#define GPIOC_3 44
-#define GPIOC_4 45
-#define GPIOC_5 46
-#define GPIOC_6 47
-#define GPIOC_7 48
-#define GPIOA_0 49
-#define GPIOA_1 50
-#define GPIOA_2 51
-#define GPIOA_3 52
-#define GPIOA_4 53
-#define GPIOA_5 54
-#define GPIOA_6 55
-#define GPIOA_7 56
-#define GPIOA_8 57
-#define GPIOA_9 58
-#define GPIOA_10 59
-#define GPIOA_11 60
-#define GPIOA_12 61
-#define GPIOA_13 62
-#define GPIOA_14 63
-#define GPIOA_15 64
-#define GPIOX_0 65
-#define GPIOX_1 66
-#define GPIOX_2 67
-#define GPIOX_3 68
-#define GPIOX_4 69
-#define GPIOX_5 70
-#define GPIOX_6 71
-#define GPIOX_7 72
-#define GPIOX_8 73
-#define GPIOX_9 74
-#define GPIOX_10 75
-#define GPIOX_11 76
-#define GPIOX_12 77
-#define GPIOX_13 78
-#define GPIOX_14 79
-#define GPIOX_15 80
-#define GPIOX_16 81
-#define GPIOX_17 82
-#define GPIOX_18 83
-#define GPIOX_19 84
-
-#endif /* _DT_BINDINGS_MESON_G12A_GPIO_H */
diff --git a/include/dt-bindings/power/meson-g12a-power.h b/include/dt-bindings/power/meson-g12a-power.h
deleted file mode 100644
index bb5e67a842..0000000000
--- a/include/dt-bindings/power/meson-g12a-power.h
+++ /dev/null
@@ -1,13 +0,0 @@
-/* SPDX-License-Identifier: (GPL-2.0+ or MIT) */
-/*
- * Copyright (c) 2019 BayLibre, SAS
- * Author: Neil Armstrong <narmstrong at baylibre.com>
- */
-
-#ifndef _DT_BINDINGS_MESON_G12A_POWER_H
-#define _DT_BINDINGS_MESON_G12A_POWER_H
-
-#define PWRC_G12A_VPU_ID 0
-#define PWRC_G12A_ETH_ID 1
-
-#endif
diff --git a/include/dt-bindings/power/meson-sm1-power.h b/include/dt-bindings/power/meson-sm1-power.h
deleted file mode 100644
index a020ab00c1..0000000000
--- a/include/dt-bindings/power/meson-sm1-power.h
+++ /dev/null
@@ -1,18 +0,0 @@
-/* SPDX-License-Identifier: (GPL-2.0+ or MIT) */
-/*
- * Copyright (c) 2019 BayLibre, SAS
- * Author: Neil Armstrong <narmstrong at baylibre.com>
- */
-
-#ifndef _DT_BINDINGS_MESON_SM1_POWER_H
-#define _DT_BINDINGS_MESON_SM1_POWER_H
-
-#define PWRC_SM1_VPU_ID 0
-#define PWRC_SM1_NNA_ID 1
-#define PWRC_SM1_USB_ID 2
-#define PWRC_SM1_PCIE_ID 3
-#define PWRC_SM1_GE2D_ID 4
-#define PWRC_SM1_AUDIO_ID 5
-#define PWRC_SM1_ETH_ID 6
-
-#endif
diff --git a/include/dt-bindings/reset/amlogic,meson-axg-audio-arb.h b/include/dt-bindings/reset/amlogic,meson-axg-audio-arb.h
deleted file mode 100644
index 1ef807856c..0000000000
--- a/include/dt-bindings/reset/amlogic,meson-axg-audio-arb.h
+++ /dev/null
@@ -1,19 +0,0 @@
-/* SPDX-License-Identifier: (GPL-2.0 OR MIT)
- *
- * Copyright (c) 2018 Baylibre SAS.
- * Author: Jerome Brunet <jbrunet at baylibre.com>
- */
-
-#ifndef _DT_BINDINGS_AMLOGIC_MESON_AXG_AUDIO_ARB_H
-#define _DT_BINDINGS_AMLOGIC_MESON_AXG_AUDIO_ARB_H
-
-#define AXG_ARB_TODDR_A 0
-#define AXG_ARB_TODDR_B 1
-#define AXG_ARB_TODDR_C 2
-#define AXG_ARB_FRDDR_A 3
-#define AXG_ARB_FRDDR_B 4
-#define AXG_ARB_FRDDR_C 5
-#define AXG_ARB_TODDR_D 6
-#define AXG_ARB_FRDDR_D 7
-
-#endif /* _DT_BINDINGS_AMLOGIC_MESON_AXG_AUDIO_ARB_H */
diff --git a/include/dt-bindings/reset/amlogic,meson-g12a-audio-reset.h b/include/dt-bindings/reset/amlogic,meson-g12a-audio-reset.h
deleted file mode 100644
index f805129ca7..0000000000
--- a/include/dt-bindings/reset/amlogic,meson-g12a-audio-reset.h
+++ /dev/null
@@ -1,53 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * Copyright (c) 2019 BayLibre, SAS.
- * Author: Jerome Brunet <jbrunet at baylibre.com>
- *
- */
-
-#ifndef _DT_BINDINGS_AMLOGIC_MESON_G12A_AUDIO_RESET_H
-#define _DT_BINDINGS_AMLOGIC_MESON_G12A_AUDIO_RESET_H
-
-#define AUD_RESET_PDM 0
-#define AUD_RESET_TDMIN_A 1
-#define AUD_RESET_TDMIN_B 2
-#define AUD_RESET_TDMIN_C 3
-#define AUD_RESET_TDMIN_LB 4
-#define AUD_RESET_LOOPBACK 5
-#define AUD_RESET_TODDR_A 6
-#define AUD_RESET_TODDR_B 7
-#define AUD_RESET_TODDR_C 8
-#define AUD_RESET_FRDDR_A 9
-#define AUD_RESET_FRDDR_B 10
-#define AUD_RESET_FRDDR_C 11
-#define AUD_RESET_TDMOUT_A 12
-#define AUD_RESET_TDMOUT_B 13
-#define AUD_RESET_TDMOUT_C 14
-#define AUD_RESET_SPDIFOUT 15
-#define AUD_RESET_SPDIFOUT_B 16
-#define AUD_RESET_SPDIFIN 17
-#define AUD_RESET_EQDRC 18
-#define AUD_RESET_RESAMPLE 19
-#define AUD_RESET_DDRARB 20
-#define AUD_RESET_POWDET 21
-#define AUD_RESET_TORAM 22
-#define AUD_RESET_TOACODEC 23
-#define AUD_RESET_TOHDMITX 24
-#define AUD_RESET_CLKTREE 25
-
-/* SM1 added resets */
-#define AUD_RESET_RESAMPLE_B 26
-#define AUD_RESET_TOVAD 27
-#define AUD_RESET_LOCKER 28
-#define AUD_RESET_SPDIFIN_LB 29
-#define AUD_RESET_FRATV 30
-#define AUD_RESET_FRHDMIRX 31
-#define AUD_RESET_FRDDR_D 32
-#define AUD_RESET_TODDR_D 33
-#define AUD_RESET_LOOPBACK_B 34
-#define AUD_RESET_EARCTX 35
-#define AUD_RESET_EARCRX 36
-#define AUD_RESET_FRDDR_E 37
-#define AUD_RESET_TODDR_E 38
-
-#endif
diff --git a/include/dt-bindings/reset/amlogic,meson-g12a-reset.h b/include/dt-bindings/reset/amlogic,meson-g12a-reset.h
deleted file mode 100644
index 6d487c5eba..0000000000
--- a/include/dt-bindings/reset/amlogic,meson-g12a-reset.h
+++ /dev/null
@@ -1,137 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause */
-/*
- * Copyright (c) 2019 BayLibre, SAS.
- * Author: Jerome Brunet <jbrunet at baylibre.com>
- *
- */
-
-#ifndef _DT_BINDINGS_AMLOGIC_MESON_G12A_RESET_H
-#define _DT_BINDINGS_AMLOGIC_MESON_G12A_RESET_H
-
-/* RESET0 */
-#define RESET_HIU 0
-/* 1 */
-#define RESET_DOS 2
-/* 3-4 */
-#define RESET_VIU 5
-#define RESET_AFIFO 6
-#define RESET_VID_PLL_DIV 7
-/* 8-9 */
-#define RESET_VENC 10
-#define RESET_ASSIST 11
-#define RESET_PCIE_CTRL_A 12
-#define RESET_VCBUS 13
-#define RESET_PCIE_PHY 14
-#define RESET_PCIE_APB 15
-#define RESET_GIC 16
-#define RESET_CAPB3_DECODE 17
-/* 18 */
-#define RESET_HDMITX_CAPB3 19
-#define RESET_DVALIN_CAPB3 20
-#define RESET_DOS_CAPB3 21
-/* 22 */
-#define RESET_CBUS_CAPB3 23
-#define RESET_AHB_CNTL 24
-#define RESET_AHB_DATA 25
-#define RESET_VCBUS_CLK81 26
-/* 27-31 */
-/* RESET1 */
-/* 32 */
-#define RESET_DEMUX 33
-#define RESET_USB 34
-#define RESET_DDR 35
-/* 36 */
-#define RESET_BT656 37
-#define RESET_AHB_SRAM 38
-/* 39 */
-#define RESET_PARSER 40
-/* 41 */
-#define RESET_ISA 42
-#define RESET_ETHERNET 43
-#define RESET_SD_EMMC_A 44
-#define RESET_SD_EMMC_B 45
-#define RESET_SD_EMMC_C 46
-/* 47 */
-#define RESET_USB_PHY20 48
-#define RESET_USB_PHY21 49
-/* 50-60 */
-#define RESET_AUDIO_CODEC 61
-/* 62-63 */
-/* RESET2 */
-/* 64 */
-#define RESET_AUDIO 65
-#define RESET_HDMITX_PHY 66
-/* 67 */
-#define RESET_MIPI_DSI_HOST 68
-#define RESET_ALOCKER 69
-#define RESET_GE2D 70
-#define RESET_PARSER_REG 71
-#define RESET_PARSER_FETCH 72
-#define RESET_CTL 73
-#define RESET_PARSER_TOP 74
-/* 75-77 */
-#define RESET_DVALIN 78
-#define RESET_HDMITX 79
-/* 80-95 */
-/* RESET3 */
-/* 96-95 */
-#define RESET_DEMUX_TOP 105
-#define RESET_DEMUX_DES_PL 106
-#define RESET_DEMUX_S2P_0 107
-#define RESET_DEMUX_S2P_1 108
-#define RESET_DEMUX_0 109
-#define RESET_DEMUX_1 110
-#define RESET_DEMUX_2 111
-/* 112-127 */
-/* RESET4 */
-/* 128-129 */
-#define RESET_MIPI_DSI_PHY 130
-/* 131-132 */
-#define RESET_RDMA 133
-#define RESET_VENCI 134
-#define RESET_VENCP 135
-/* 136 */
-#define RESET_VDAC 137
-/* 138-139 */
-#define RESET_VDI6 140
-#define RESET_VENCL 141
-#define RESET_I2C_M1 142
-#define RESET_I2C_M2 143
-/* 144-159 */
-/* RESET5 */
-/* 160-191 */
-/* RESET6 */
-#define RESET_GEN 192
-#define RESET_SPICC0 193
-#define RESET_SC 194
-#define RESET_SANA_3 195
-#define RESET_I2C_M0 196
-#define RESET_TS_PLL 197
-#define RESET_SPICC1 198
-#define RESET_STREAM 199
-#define RESET_TS_CPU 200
-#define RESET_UART0 201
-#define RESET_UART1_2 202
-#define RESET_ASYNC0 203
-#define RESET_ASYNC1 204
-#define RESET_SPIFC0 205
-#define RESET_I2C_M3 206
-/* 207-223 */
-/* RESET7 */
-#define RESET_USB_DDR_0 224
-#define RESET_USB_DDR_1 225
-#define RESET_USB_DDR_2 226
-#define RESET_USB_DDR_3 227
-#define RESET_TS_GPU 228
-#define RESET_DEVICE_MMC_ARB 229
-#define RESET_DVALIN_DMC_PIPL 230
-#define RESET_VID_LOCK 231
-#define RESET_NIC_DMC_PIPL 232
-#define RESET_DMC_VPU_PIPL 233
-#define RESET_GE2D_DMC_PIPL 234
-#define RESET_HCODEC_DMC_PIPL 235
-#define RESET_WAVE420_DMC_PIPL 236
-#define RESET_HEVCF_DMC_PIPL 237
-/* 238-255 */
-
-#endif
diff --git a/include/dt-bindings/sound/meson-g12a-toacodec.h b/include/dt-bindings/sound/meson-g12a-toacodec.h
deleted file mode 100644
index 69d7a75592..0000000000
--- a/include/dt-bindings/sound/meson-g12a-toacodec.h
+++ /dev/null
@@ -1,10 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __DT_MESON_G12A_TOACODEC_H
-#define __DT_MESON_G12A_TOACODEC_H
-
-#define TOACODEC_IN_A 0
-#define TOACODEC_IN_B 1
-#define TOACODEC_IN_C 2
-#define TOACODEC_OUT 3
-
-#endif /* __DT_MESON_G12A_TOACODEC_H */
diff --git a/include/dt-bindings/sound/meson-g12a-tohdmitx.h b/include/dt-bindings/sound/meson-g12a-tohdmitx.h
deleted file mode 100644
index c5e1f48d30..0000000000
--- a/include/dt-bindings/sound/meson-g12a-tohdmitx.h
+++ /dev/null
@@ -1,13 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __DT_MESON_G12A_TOHDMITX_H
-#define __DT_MESON_G12A_TOHDMITX_H
-
-#define TOHDMITX_I2S_IN_A 0
-#define TOHDMITX_I2S_IN_B 1
-#define TOHDMITX_I2S_IN_C 2
-#define TOHDMITX_I2S_OUT 3
-#define TOHDMITX_SPDIF_IN_A 4
-#define TOHDMITX_SPDIF_IN_B 5
-#define TOHDMITX_SPDIF_OUT 6
-
-#endif /* __DT_MESON_G12A_TOHDMITX_H */
--
2.34.1
More information about the U-Boot
mailing list